Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Characterizing acid diffusion lengths in chemically amplified resists from measurements of deprotection kinetics

The acid-catalyzed deprotection of glassy poly(4-hydroxystyrene-co-tertbutyl acrylate) films was studied with infrared absorbance spectroscopy and stochastic simulations. Experimental data were interpreted with a simple description of subdiffusive acid transport coupled to second-order acid loss. This model predicts key attributes of observed deprotection rates, such as fast reaction at short times, slow reaction at long times, and a nonlinear dependence on acid loading. Fickian diffusion is approached by increasing the post-exposure bake temperature or adding plasticizing agents to the polymer resin. These findings demonstrate that acid mobility and overall deprotection kinetics are coupled to glassy matrix dynamics. To complement the analysis of bulk kinetics, acid diffusion lengths were calculated from the anomalous transport model and compared with nanopattern line widths. The consistent scaling between experiments and simulations suggests that the anomalous diffusion model could be further developed into a predictive lithography tool.

Patil, Abhijit A.↗

Bacterial nitrite production oxidizes Fe(II) bioremediating acidic abandoned coal mine drainage

Passive remediation systems (PRSs) treating either acidic or neutral abandoned coal mine drainage (AMD) are colonized by bacteria that can bioremediate iron (Fe) through chemical cycling. Due to the low pH in acidic AMD, iron oxidation from soluble Fe(II) to precipitated Fe(III) is mainly directed by microbial oxidation. Less well described are biotic reactions that lead to iron remediation through abiotic secondary reactions. We describe here iron oxidation in acidic AMD that is mediated by the bacterial reduction of nitrate to nitrite followed by the geochemical oxidation of Fe(II). Within an acidic PRS, 4,560 bacteria cultured from the microbial community were screened for their ability to oxidize iron and to perform nitrate-dependent iron oxidation (NDFO). Iron oxidation in the culturable community was observed in every pond of the system, ranging from 2.1% to 11.4%, and NDFO was observed in every pond, ranging from 1.4% to 6.0% of the culturable bacteria. Five NDFO isolates were purified and identified as Paraburkholderia spp. One of our isolates, Paraburkholderia sp. AV18 was shown to drive NDFO through the bacterial production of nitrite that in turn chemically oxidizes Fe(II) (nitrate reduction-iron oxidation; NRIO). AV18 expressed nitrate reductase, napA, concurrent to nitrite production. Burkholderiales are found by 16S rRNA gene sequencing in every pond of the PRS. The frequency of NDFO metabolism in the culturable microbial community and abundance of Burkholderiales in the PRS suggest nitrite producers contribute to the bioremediation of iron in acidic AMD and may be an unharnessed opportunity to increase iron bioremediation in acidic conditions.

(NDFO)↗

Microbial ecology of acidic, biogenic gypsum: community structure and distribution of extremophiles on freshly formed and relict sulfate deposits in a hydrogen sulfide-rich cave

Sulfate minerals are abundant on the Martian surface, and many of these evaporite deposits are thought to have precipitated from acidic fluids. On Earth, gypsum (CaSO 4 •2H 2 O) and other sulfates sometimes form under acidic conditions, so exploring the extremophilic life that occurs in these mineral environments can help evaluate the astrobiological potential of acid sulfate depositional settings. Here, we characterized the microbial communities associated with acidic gypsum deposits in a sulfuric acid cave, where sulfate precipitation is driven by sulfide-oxidizing bacteria and archaea. We used 16S rRNA gene sequencing and cell counts to characterize gypsum-associated microorganisms in freshly formed and relict deposits throughout the cave, to test how microbial community composition and abundance would vary with distance from the sulfidic water table and with the concentration of H 2 S(g) and other gases in the cave atmosphere. We found that actively forming gypsum in the lower cave levels was colonized by low-diversity communities that have few cells compared to other environments in the cave. The most abundant taxa were Acidithiobacillus, Metallibacterium, Mycobacteria, and three different Thermoplasmatales-group archaea, which occupied distinct niches based on proximity to sulfidic streams and the concentration of gases in the cave air. By contrast, deposits in older cave levels had more diverse communities that were distinct from those associated with freshly formed gypsum and likely represent a community reliant on different energy resources. These findings show that acidic sulfate deposits serve as habitats for extremophilic microorganisms and broaden our knowledge of the life associated with terrestrial sulfates.

58 GEOSCIENCES↗

The Role of Citric Acid in Perfecting Platinum Monolayer on Palladium Nanoparticles during the Surface Limited Redox Replacement Reaction

Cu-mediated-Pt-displacement method that involves the displacement of an underpotentially deposited (UPD) Cu monolayer by Pt has been extensively studied to prepare core-shell catalysts. It has been found that Pt clusters instead of a uniform Pt monolayer were formed in the gram batch synthesis. With a suitable surfactant, such as citric acid, the Pt shell could be much more uniform. In this study, the role of citric acid in controlling the Cu-Pt displacement reaction kinetics was studied by electrochemical techniques and theoretical approaches. It was found that citric acid strongly adsorbed on Pd, Pt, Cu/Pd, and Pt/Pd surfaces, especially in the double layer region in acid solutions. The strong adsorption of citric acid slowed down the Cu-Pt displacement reaction. The main characteristics of such strong interaction most likely arises from the OH groups in the citric acid molecule according to the molecular dynamics simulation results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Fatty Acids in Crenarchaeota by GC-MS and NMR

Lipids composed of condensed isoprenyl units connected to glycerol backbones by ether linkages are a distinguishing feature of Archaea. Data suggesting that fatty acids with linear hydrocarbon chains are present in some Archaea have been available for decades. However, lack of genomic and biochemical evidence for the metabolic machinery required to synthesize and degrade fatty acids has left the field unclear on this potentially significant biochemical aspect. Because lipids are energy currency and cell signaling molecules, their presence in Archaea is significant for understanding archaeal biology. A recent large-scale bioinformatics analysis reignited the debate as to the importance of fatty acids in Archaea by presenting genetic evidence for the presence of enzymes required for anabolic and catabolic fatty acid metabolism across the archaeal domain. Here, we present direct biochemical evidence from gas chromatography-mass spectrometry (GC-MS) and nuclear magnetic resonance (NMR) spectroscopy for the presence of fatty acids in two members of the Crenarchaeota, Sulfolobus solfataricus and Ignicoccus hospitalis . This is the first report providing biochemical data for the existence of fatty acids in these Crenarchaeota, opening new discussions on energy balance and the potential for the discovery of new thermostable enzymes for industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data for Solvent-Free Enzymatic Esterification of Free Fatty Acids with Glycerol for Biodiesel Application: Optimized Using the Taguchi Experimental Method

Presence of free fatty acids along with glycerides poses a technical difficulty for biodiesel production. This work used a Taguchi L9 design to optimize the solvent-free enzymatic process to result in the esterification of oleic acid with glycerol. Under optimal conditions the esterification reaction temperature of 60°C, enzyme dose of 5 wt%, glycerol: oleic acid molar ratio of 5:1, and reaction time of 3 h, a 75.235 ± 2.19% conversion of oleic acid to esters was achieved. With the addition of molecular sieves, the conversion increased to 86.73% ± 1.09%. However, using the parameters predicted by Taguchi design (60°C, 5 wt%, 5:1, and 4.5 h), 88.5% ± 1.11% of oleic acid could be converted to esters derivative. Diglycerides were the major product, and the reaction equilibrium was attained after 4 h. The immobilized enzyme could be used up to seven times with only a 10% reduction in the conversion. Thus, the process can efficiently reduce the free fatty acid content of oil to make it suitable for biodiesel production.

Conversion↗

Data from Reactive Species and Reaction Pathways for the Oxidative Cleavage of 4-Octene and Oleic Acid with H2O2 over Tungsten Oxide Catalysts

Oxidative cleavage of carbon–carbon double bonds (C═C) in alkenes and fatty acids produces aldehydes and acids valued as chemical intermediates. Solid tungsten oxide catalysts are low cost, nontoxic, and selective for the oxidative cleavage of C═C bonds with hydrogen peroxide (H2O2) and are, therefore, a promising option for continuous processes. Despite the relevance of these materials, the elementary steps involved and their sensitivity to the form of W sites present on surfaces have not been described. Here, we combine in situ spectroscopy and rate measurements to identify significant steps in the reaction and the reactive species present on the catalysts and examine differences between the kinetics of this reaction on isolated W atoms grafted to alumina and on those exposed on crystalline WO3 nanoparticles. Raman spectroscopy shows that W–peroxo complexes (W–(η2-O2)) formed from H2O2 react with alkenes in a kinetically relevant step to produce epoxides, which undergo hydrolysis at protic surface sites. Subsequently, the CH3CN solvent deprotonates diols to form alpha-hydroxy ketones that react to form aldehydes and water following nucleophilic attack of H2O2. Turnover rates for oxidative cleavage, determined by in situ site titrations, on WOx–Al2O3 are 75% greater than those on WO3 at standard conditions. These differences reflect the activation enthalpies (ΔH‡) for the oxidative cleavage of 4-octene that are much lower than those for the isolated WOx sites (36 ± 3 and 60 ± 6 kJ·mol–1 for WOx–Al2O3 and WO3, respectively) and correlate strongly with the difference between the enthalpies of adsorption for epoxyoctane (ΔHads,epox), which resembles the transition state for epoxidation. The WOx–Al2O3 catalysts mediate oxidative cleavage of oleic acid with H2O2 following a mechanism comparable to that for the oxidative cleavage of 4-octene. The WO3 materials, however, form only the epoxide and do not cleave the C–C bond or produce aldehydes and acids. These differences reflect the distinct site requirements for these reaction pathways and indicate that acid sites required for diol formation are strongly inhibited by oleic acids and epoxides on WO3 whereas the Al2O3 support provides sites competent for this reaction and increase the yield of the oxidative cleavage products.

Catalysis↗

Data for Evaluation of Strategies to Narrow the Product Chain-Length Distribution of Microbially Synthesized Free Fatty Acids

The dominant strategy for tailoring the chain-length distribution of free fatty acids (FFA) synthesized by heterologous hosts is expression of a selective acyl-acyl carrier protein (ACP) thioesterase. However, few of these enzymes can generate a precise (greater than 90% of a desired chain-length) product distribution when expressed in a microbial or plant host. The presence of alternative chain-lengths can complicate purification in situations where blends of fatty acids are not desired. We report the assessment of several strategies for improving the dodecanoyl-ACP thioesterase from the California bay laurel to exhibit more selective production of medium-chain free fatty acids to near exclusivity. We demonstrated that matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-ToF MS) was an effective library screening technique for identification of thioesterase variants with favorable shifts in chain-length specificity. This strategy proved to be a more effective screening technique than several rational approaches discussed herein. With this data, we isolated four thioesterase variants which exhibited a more selective FFA distribution over wildtype when expressed in the fatty acid accumulating E. coli strain, RL08. We then combined mutations from the MALDI isolates to generate BTE-MMD19, a thioesterase variant capable of producing free fatty acids consisting of 90% of C12 products. Of the four mutations which conferred a specificity shift, we noted that three affected the shape of the binding pocket, while one occurred on the positively charged acyl carrier protein landing pad. Finally, we fused the maltose binding protein (MBP) from E. coli to the N – terminus of BTE-MMD19 to improve enzyme solubility and achieve a titer of 1.9 g per L of twelve-carbon fatty acids in a shake flask.

Conversion↗

Data for Production of Designer Xylose-Acetic Acid Enriched Hydrolysate from Bioenergy Sorghum, Oilcane, and Energycane Bagasses

Xylan accounts for up to 40% of the structural carbohydrates in lignocellulosic feedstocks. Along with xylan, acetic acid in sources of hemicellulose can be recovered and marketed as a commodity chemical. Through vibrant bioprocessing innovations, converting xylose and acetic acid into high-value bioproducts via microbial cultures improves the feasibility of lignocellulosic biorefineries. Enzymatic hydrolysis using xylanase supplemented with acetylxylan esterase (AXE) was applied to prepare xylose-acetic acid enriched hydrolysates from bioenergy sorghum, oilcane, or energycane using sequential hydrothermal-mechanical pretreatment. Various biomass solids contents (15 to 25%, w/v) and xylanase loadings (140 to 280 FXU/g biomass) were tested to maximize xylose and acetic acid titers. The xylose and acetic acid yields were significantly improved by supplementing with AXE. The optimal yields of xylose and acetic acid were 92.29% and 62.26% obtained from hydrolyzing energycane and oilcane at 25% and 15% w/v biomass solids using 280 FXU xylanase/g biomass and AXE, respectively.

Biomass Analytics↗

Proximate Composition and Fatty Acid Differences in Hatchery-Reared and Wild Snake River Sockeye Salmon Overwintering in Nursery Lakes

Abstract In the artificial propagation program for endangered Snake River sockeye salmon Oncorhynchus nerka, a portion of the F1 progeny (produced from spawning captive parents) are retained in the hatchery through maturation and spawning; the remaining progeny are reintroduced to nursery lakes in central Idaho at several life history stages (egg, presmolt, and smolt). In this study, the proximate and fatty acid compositions of sockeye salmon from presmolt releases were analyzed both at planting and at out-migration to assess their feeding success after overwintering in nursery lakes relative to that of overwintering wild fish. Hatchery-origin presmolts did not grow significantly over the winter. However, size and length were similar between hatchery-origin fish and wild out-migrants. Average percent whole-body lipid declined significantly in hatchery-origin sockeye salmon overwinter. Hatchery-origin out-migrants also had significantly lower whole-body lipid than wild counterparts migrating from Redfish Lake, Idaho, over the 6 years examined. The lack of growth and significantly lower body fat content of hatchery-origin sockeye salmon suggest that the food resources available to both wild and hatchery-origin presmolts were not utilized equally. There were also significant differences in fatty acid composition between wild and hatchery-origin out-migrants. Wild out-migrants had fatty acid profiles indicative of the zooplankton diet typical of resident sockeye salmon in the lake. In contrast, hatchery-reared juveniles introduced as presmolts in the fall had fatty acid profiles resembling those associated with hatchery diets and showed no evidence of the fatty acids characteristically observed in zooplankton. After overwintering, hatchery-origin out-migrants had fatty acid profiles that were intermediate between those of fish at planting and those of wild fish, reflecting some zooplankton intake during this period. The compromise in lipid quantity and quality for hatchery-produced presmolts may, in part, explain the large observed reductions in smolt-to-adult survival relative to that of naturally produced sockeye salmon.

Powell, M. S.↗

Rare-earth leaching from Florida phosphate rock in wet-process phosphoric acid production

Phosphorite, or phosphate rock, is the most significant secondary rare-earth resource. It contains high amounts of phosphate-bearing minerals along with low contents of rare earth elements (REEs). In Florida, about 19 Mt of phosphate rock are mined annually and most are used to manufacture fertilizers using a wet process, in which sulfuric acid reacts with phosphates to produce phosphoric acid and phosphogypsum. In the wet process, REEs are also leached out into solution and eventually get lost in the leaching residue and phosphate fertilizer. Recovering REEs from Florida phosphate rock in the wet process will be beneficial to broadening rare-earth availability, improving the quality of phosphoric acid product and protecting the environment. Here, this study focuses on the influences of wet-process operating conditions on REE leaching efficiency. The results indicate that REE leaching efficiency increases with phosphoric acid addition in the initial pulp. At a temperature of 75 °C, a stoichiometric ratio of sulfuric acid (H2 SO4 ) to calcium oxide (CaO) of 1.05 and a weight ratio of liquid to solid of 3.5, REE leaching efficiency reached a relatively high value of 52.82 percent. The trends of REE leaching efficiency were similar to those for phosphoric acid (P2O5 ). Extensive tests on the leaching residue showed that during leaching, about 90 percent of the REEs were released from the phosphate rock but only 52.82 percent ended up in the leaching solution. This phenomenon can be attributed to two factors: (1) the effect of phosphate ions (PO43-) in the solution, which caused REE ions to form REE phosphates and be precipitated into the leaching residue, and (2) the influence of large amounts of anions such as sulfate (SO42-), dihydrogen phosphate (H2 PO4-) and hydrogen phosphate (HPO42-) anions as well as the polar molecule H3 PO4 , which surrounded the REE cations and formed an ion atmosphere that prevented the PO43- from contacting and combining with REE cations. Finally, interaction of these two opposite effects determined the REE distribution between leaching solution and residue.

54 ENVIRONMENTAL SCIENCES↗

Camelina Seed Yield and Fatty Acids as Influenced by Genotype and Environment

Camelina (Camelina sativa L. Crantz) is an alternative oilseed crop with potential for fallow replacement in dryland cereal-based crop production systems in the semiarid Great Plains. The interaction between genotype and environment was investigated on camelina seed yield, oil content, and fatty acid composition across two locations in the U.S. Great Plains. Treatments were three spring camelina genotypes (cultivars Blaine Creek, Pronghorn, and Shoshone), three growing seasons (2013, 2014, and 2015) and two locations (at Hays, KS, and Moccasin, MT). Our results showed camelina grown at Hays yielded 54% less than that at Moccasin. Blaine Creek yielded 17 and 42% more than Pronghorn and Shoshone at Hays but yields were not different among genotypes at Moccasin. Oil content ranged from 262 g kg -1 at Hays to 359 g kg -1 at Moccasin. The proportion of polyunsaturated fatty acids (PUFAs) ranged from 51% at Hays to 55% at Moccasin, whereas monounsaturated fatty acid (MUFA) and saturated fatty acid (SFA) contents were greater at Hays. The linolenic acid content ranged from 26% when Pronghorn was planted at Hays to 35% when planted at Moccasin. In general, the variations in seed yield and fatty acid profile corresponded well with growing season precipitation and temperatures at each environment.

54 ENVIRONMENTAL SCIENCES↗

Material compatibility evaluation for DWPF nitric-glycolic acid-literature review

Glycolic acid is being evaluated as an alternative for formic and nitric acid in the DWPF flowsheet. Demonstration testing and modeling for this new flowsheet has shown that glycolic acid and glycolate has a potential to remain in certain streams generated during the production of the nuclear waste glass. A literature review was conducted to assess the impact of glycolic acid on the corrosion of the materials of construction for the DWPF facility as well as facilities downstream which may have residual glycolic acid and glycolates present. The literature data was limited to solutions containing principally glycolic acid.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Material Compatibility Evaluation for DWPF Nitric-Glycolic Acid - Literature Review

Glycolic acid is being evaluated as an alternative for formic and nitric acid in the DWPF flowsheet. Demonstration testing and modeling for this new flowsheet has shown that glycolic acid and glycolate has a potential to remain in certain streams generated during the production of the nuclear waste glass. A literature review was conducted to assess the impact of glycolic acid on the corrosion of the materials of construction for the DWPF facility as well as facilities downstream which may have residual glycolic acid and glycolates present. The literature data was limited to solutions containing principally glycolic acid. The reported corrosion rates and degradation characteristics have shown the following for the materials of construction.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DWPF Melter Off-Gas Chemistry Model for the Nitric-Glycolic Acid Flowsheet

The Defense Waste Processing Facility (DWPF) melter off-gas flammability model for the current nitricformic acid (NFA) flowsheet was revised in Revision 0 to reflect the upcoming reductant change from formic to glycolic acid. The necessary data for the model revision was obtained during Phase 2 of the Coldcap Evaluation Furnace (CEF) test, which was completed on March 21, 2014 after 24 days of round-theclock feeding and pouring, including a total downtime of ~20 hours due to equipment failures. Specifically, the CEF was run to generate steady state melter off-gas data during the first 10 days using two nitricglycolic acid (NGA) flowsheet feeds prepared at 100% and 125% acid stoichiometry from the same Sludge Batch 6 (SB6) simulant used during the Phase 1 CEF test in 2013. Each feed was fed under both bubbled and non-bubbled conditions, while maintaining the CEF vapor space temperature constant for at least two hours approximately at 700, 600, 500, 400, 350, and <300 °C for a total of 26 steady state runs. During the next 8 days, the CEF was run at the nominal vapor space temperature of 700 °C to generate the off-gas surge data using the 100% acid-stoichiometry feed under bubbled and non-bubbled conditions. The remaining days were spent on producing additional data using the 100% acid-stoichiometry feed spiked with excess antifoam as well as re-running some of the earlier steady state runs.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Vertical Testing and Preparation of an Acid-Free Electropolished SRF Cavity

The project team proposes to build upon recent work to develop a robust, high throughput vertical Final Electropolishing process for SRF cavities, based on an Acid-Free Bipolar Electropolishing process, to replace conventional electropolishing for single and nine-cell cavities at the alpha/beta scale. The development of Bipolar EP for final surface finishing step will enable a manufacturing process that controls costs and reduces the environmental and health hazards associated with using acid solutions. The proposed outcome is a cost effective and robust process for final electropolishing of niobium SRF cavities. The market size for SRF cavities for the International Linear Collider is ~16,000 cavities, with applicability to many other cavity configurations and applications. Other markets for Acid-Free Bipolar EP include niobium-alloys that are hypoallergenic and commonly alloyed with titanium and zirconium to make implantable medical devices and require HF acid for polishing. Elimination of acids for electropolishing of medical implants is an important need and represents a strong commercial opportunity with a US market of ~$45B by 2014. Under this CRADA, Fermilab provided a 1.3 GHz RF cavity to Faraday Technology to use for acid-free electropolishing studies. The original scope of work also provided for up to two tests of the electropolished cavity in Fermilab’s Vertical Test Stand (VTS).

43 PARTICLE ACCELERATORS↗

An Intensified Electro-Catalytic Process for Production of Formic Acid from Power Plant CO 2 Emissions (Final Technical Report)

The goal of this project was to develop and test a novel electro-catalytic method for the production of high-value formic acid from coal-derived CO 2 as a strategy to offset the cost of CO 2 capture. Formic acid is currently produced from the conversion of higher-order carbon products such as methane and/or methanol. This electro-catalytic CO 2 reduction process utilizes a highly selective catalyst in a flow-through reactor design to maximize the formic acid production rate. The specific objectives of this proposed study were to; 1) produce and screen highly selective engineered CO 2 reducing catalysts capable of exclusively producing formic acid; 2) immobilize the catalyst within a flow process to continually produce formic acid and increase catalyst lifetime; and 3) assess the stability of the electrocatalyst during long-term operation. The project involved the development and testing of an engineered catalyst to selectively reduce CO 2 directly and exclusively to formic acid. After the best-performing catalyst was selected, it was immobilized and tested inside a flow-through reactor at UK CAER using realistic conditions expected from CO 2 produced during coal combustion and separated by a CO 2 capture plant.

01 COAL, LIGNITE, AND PEAT↗

Novel Approaches to the Isolation of Glucaric Acid from Fermentation Broth. Final report

Kalion has successfully demonstrated a fermentation route using glucose as the feedstock. This game-changing technology allows Kalion to economically produce large-scale quantities of high-purity glucaric acid products. Kalion has also developed a novel downstream processing strategy for isolating and purifying glucaric acid forms, including the free acid, monoammonium glucarate, and monopotassium glucarate. Despite the low solubility of these products, significant water removal is needed prior to crystallization, requiring energy intensive evaporation or reverse osmosis. Here, we work in collaboration with the Separations Consortium to develop novel, low-cost means of water removal in Kalion’s glucarate/glucaric acid purification process. This proposed CRADA project with national labs (ORNL, ANL, and NREL) evaluated various technologies developed by the Separations Consortium as applied to glucaric acid purification, intended to generate a scalable, cost-effective, energy-efficient process. Four approaches were evaluated with mock aqueous solutions of glucaric acid or glucarate, and the results analyzed with respect to separation effectiveness and potential cost savings. The leading technology will then be further developed and tested with actual clarified or non-clarified broth (depending on the approach) obtained from 20L fermentations provided by Kalion, that will contain inorganic ions, byproducts, and residual sugars in addition to the product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗