Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Study of electronic transport properties of doped 8AGNR

The electronic and transport properties of 8-armchair graphene nanoribbon (8AGNR) with defect at different sites are investigated by performing first-principles calculations based on density functional theory (DFT). The calculated results show that the 8AGNR are semiconductor. The introduction of 3d transition metals, creates the nondegenerate states in the conduction band, makes 8AGNR metallic. The computed transmission spectrum confirms that AGNR are semiconducting in nature and their band gap remain unchanged and localized states appear when there is vacancy in their structures, and the conductance decreases due to defects compared with the pristine nanoribbon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Aqueous-based route toward Fe:ZnSe semiconductor nanocrystals: Synthesis and characterization

Nearly monodisperse and luminescent Fe-doped ZnSe semiconductor nanocrystals were synthesized by an aqueous-based route. The obtained nanocrystals were characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, photoluminescence and ultraviolet-visible absorption spectroscopy. The resulting nanocrystals were well retained in the zinc blende structure, and the Fe dopants were doped into the ZnSe nanocrystals, as confirmed by X-ray photoelectron spectroscopy. From combination of transmission electron microscopy result and computing methods according to ultraviolet-visible absorption spectrum and X-ray diffraction pattern, particle size of the obtained nanocrystals was found to be about 5 nm. Thioglycolic acid as ligand was successfully capped on the surface of the resulting nanocrystals, confirmed by Fourier transform infrared and energy dispersive X-ray spectroscopy. The obtained nanocrystals exhibit an emission peak at 431 nm; and the photoluminescence band is relatively narrow and symmetric, which indicates that the nanocrystals are nearly monodisperse and homogeneous. Absorption shoulder of the resulting nanocrystals is blue-shifted compared with that of corresponding bulk ZnSe, indicating the quantum confinement effect. The possible reaction mechanism of formation of Fe-doped ZnSe nanocrystals in the aqueous solution was also discussed. Our results demonstrate that the aqueous-based route could be successfully adopted for producing high-quality doped semiconductor nanocrystals. - Research Highlights: {yields} An aqueous-based route is demonstrated for synthesizing Fe:ZnSe nanocrystals. {yields} Structure, composition and optical properties of the nanocrystals were investigated. {yields} The synthetic route could be adopted for producing high-quality doped nanocrystals.

36 MATERIALS SCIENCE↗

Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression

Highlights: • Nanocrystallised multilayered metallic material was produced by novel technique. • Bonding between nanocrystallised plates was achieved by constrained compression. • The metal-metal bonding occurred between fragmented oxide layers. • A high degree of structural inhomogeneity was observed near bonded regions. - Abstract: Nanocrystallised multilayered metallic material was obtained via duplex technique combining the surface mechanical attrition treatment (SMAT) with a novel constrained compression (CC) process. At the initial stage the 1 mm thick sheets of 316L austenitic stainless steel were processed by the SMAT in order to form a nanocrystalline structure. At the final stage disc-shaped plates excised from SMATed sheets, were assembled in a package and compressed in order to produce metallurgical bonding between individual plates. The characterization of such a multilayered structure was studied both experimentally and numerically. The microscopic examination revealed that the bonding occurred in the central portions of the package where the oxide scale covering each plate was fragmented by high shear strains. The numerical analysis confirmed that the strains at the interior interfaces are significantly higher than at the external ones. A high degree of structural inhomogeneity was observed via TEM studies in the regions where the successful bonding was achieved. Regions characterised by fine band structure with the presence of α′-martensite phase as well as coarse cellular structure within a single γ-austenite phase were identified.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and optical characterizations of chemically deposited cadmium selenide thin films

Highlights: {yields} CdSe thin films deposited first time using formic acid as a complexing agent. {yields} The deposited thin films were characterized by XRD, SEM, UV-vis-NIR and electrical techniques. {yields} X-ray diffraction analysis shows presence of zinc blende crystal structure. -- Abstract: Synthesis of cadmium selenide thin films by CBD method has been presented. The deposited film samples were subjected to XRD, SEM, UV-vis-NIR and TEP characterization. X-ray diffraction analysis showed that CdSe film sample crystallized in zinc blende or cubic phase structure. SEM studies reveal that the grains are spherical in shape and uniformly distributed all over the surface of the substrates. The optical band gap energy of as deposited film sample was found to be in the order of 1.8 eV. The electrical conductivity of the film sample was found to be 10{sup -6} ({Omega} cm){sup -1} with n-type of conduction mechanism.

36 MATERIALS SCIENCE↗

Automatic Prediction of Surface Phase Diagrams Using Ab Initio Grand Canonical Monte Carlo

The properties of a material are often strongly influenced by its surfaces. Depending on the nature of the chemical bonding in a material, its surface can undergo a variety of stabilizing reconstructions that dramatically alter the chemical reactivity, light absorption, and electronic band offsets. For decades, ab initio thermodynamics has been the method of choice for computationally determining the surface phase diagram of a material under different conditions. The surfaces considered for these studies, however, are often human-selected and too few in number, leading both to insufficient exploration of all possible surfaces and to biases toward portions of the composition–structure phase space that often do not encompass the most stable surfaces. To overcome these limitations and automate the discovery of realistic surfaces, we combine density functional theory and grand canonical Monte Carlo (GCMC) into “ab initio GCMC.” This paper presents the successful application of ab initio GCMC to the study of oxide overlayers on Ag(111), which, for many years, mystified experts in surface science and catalysis. Specifically, we report that ab initio GCMC is able to reproduce the surface phase diagram of Ag(111) with no preconceived notions about the system. Using nonlinear, random forest regression, we discover that the Ag coordination number with O and the surface O–Ag–O bond angles are good descriptors of the surface energy. Additionally, using the composition–structure evolution histories produced by ab initio GCMC, we deduce a mechanism for the formation of oxide overlayers based on the Ag 3 O 4 pyramid motif that is common to many reconstructions of Ag(111). Lastly, ab initio GCMC is a promising tool for the discovery of realistic surfaces that can then be used to study phenomena on complex surfaces such as heterogeneous catalysis and material growth, enabling reliable and insightful interpretations of experiments.

36 MATERIALS SCIENCE↗

Dispersive characteristics and longitudinal resonance properties in a relativistic backward wave oscillator with the coaxial arbitrary-profile slow-wave structure

The method for calculating the dispersion relations of the slow-wave structures (SWSs) with arbitrary geometrical structures is studied in detail by using the Fourier series expansion. In addition, dispersive characteristics and longitudinal resonance properties of the SWSs with the cosinusoidal, trapezoidal, and rectangular corrugations are analyzed by numerical calculation. Based on the above discussion, a comparison on an L-band coaxial relativistic backward wave oscillator (BWO) and an L-band coaxial BWO with a coaxial extractor is investigated in detail with particle-in-cell KARAT code (V. P. Tarakanov, Berkeley Research Associates, Inc., 1992). Furthermore, experiments are carried out at the TORCH-01 accelerator under the low guiding magnetic field. At diode voltage of 647 kV, beam current of 9.3 kA, and guiding magnetic field strength of 0.75 T, the microwave is generated with power of 1.07 GW, mode of TM{sub 01}, and frequency of 1.61 GHz. That is the first experimental report of the L-band BWO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural and optical properties of MgO doped ZnO

Samples of ZnO, Zn{sub 0.5}Mg{sub 0.5}O and MgO were prepared by co-precipitation method. X-ray diffraction (XRD) pattern infers that the sample of ZnO is in single-phase wurtzite structure (hexagonal phase, space group P6{sub 3}mc), MgO crystallizes in cubic Fd3m space group and Zn{sub 0.5}Mg{sub 0.5}O represents mixed nature of ZnO and MgO lattices. Similar features were observed from Raman spectroscopy. The energy band gaps estimated from UV-Vis spectroscopy are found to be 4.21 and 3.42 eV for ZnO and Zn{sub 0.5}Mg{sub 0.5}O samples respectively.

36 MATERIALS SCIENCE↗

Effect of pH on particles size and gas sensing properties of In{sub 2}O{sub 3} nanoparticles

In this work, indium oxide (In{sub 2}O{sub 3}) nanoparticles have been synthesized by co-precipitation method and the effect of pH on the structural and sensor response values of In{sub 2}O{sub 3} nanoparticles has been reported. X-ray diffraction pattern (XRD) revealed the formation of cubic phase In{sub 2}O{sub 3} nanoparticles. FESEM results indicate the formation of nearly spherical shape In{sub 2}O{sub 3} nanoparticles. The band gap energy value changed with change in pH value and found to have highest value at pH 9. Indium oxide nanoparticles thus prepared were deposited as thick films on alumina substrates to act as gas sensors and their sensing response to ethanol vapors and LPG at 50 ppm was investigated at different operating temperatures. It has been observed that all sensors exhibited optimum response at 300°C towards ethanol and at 400°C towards LPG. In{sub 2}O{sub 3} nanoparticles prepared at pH 9, being smallest in size as compared to other, exhibit highest sensor response (SR).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Molecular beam epitaxy of ZnSSe/CdSe short-period superlattices for III–V/II–VI multijunction solar cells

Results on the molecular-beam epitaxy growth of short-period alternately-strained ZnS{sub x}Se{sub 1−x}/CdSe superlattices which are pseudomorphic to GaAs (001) substrates and possess effective band-gap values within the range of E{sub g} ≈ 2.5–2.7 eV are presented. Oscillations of the specular-spot intensity in reflection high-energy electron diffraction are used for in situ control of the superlattice parameters. A method to determine the SL parameters (compositions and thicknesses of the constituent layers) based on combined analysis of the grown structures by low-temperature photoluminescence and X-ray diffractometry is developed. It is found that the parameters of the grown ZnS{sub x}Se{sub 1−x}/CdSe superlattices are close to their design values and the density of extended defects in the structures is low even though the structure thickness (∼300 nm) considerably exceeds the critical thickness for bulk II–VI layers with the same lattice-constant mismatch.

36 MATERIALS SCIENCE↗

Line Narrowing Parameter Measurement by Modulation Spectroscopy

Accurate Characterization of Oxygen A-Band Line Parameters by Wavelength Modulation Spectroscopy with tunable diode lasers is an ongoing research at Old Dominion University, under sponsorship from NASA Langley research Center. The work proposed here will be undertaken under the guidance of Dr. William Chu and Dr. Lamont Poole of the Aerosol Research Branch at NASA Langley-Research Center in Hampton, Virginia. The research was started about two years ago and utilizes wavelength modulation absorption spectroscopy with higher harmonic detection, a technique that we developed at Old Dominion University, to obtain the absorption line characteristics of the Oxygen A-band rovibronic lines. Accurate characterization of this absorption band is needed for processing of data that will be obtained in experiments such as the NASA Stratospheric Aerosol and Gas Experiment III (SAGE III) as part of the US Mission to Planet Earth. The research work for Summer Fellowship undertook a measurement of the Dicke line-narrowing parameters of the Oxygen A-Band lines by using wavelength modulation spectroscopy. Our previous theoretical results had indicated that such a measurement could be done sensitively and in a convenient fashion by using this type of spectroscopy. In particular, theoretical results had indicated that the signal magnitude would depend on pressure in a manner that was very sensitive to the narrowing parameter. One of the major tasks undertaken during the summer of 1998 was to establish experimentally that these theoretical predictions were correct. This was done successfully and the results of the work are being prepared for publication. Experimental Results were obtained in which the magnitude of the signal was measured as a function of pressure, for various harmonic detection orders (N = 1, 2, 3, 4, 5). A comparison with theoretical results was made, and it was shown that the agreement between theory and experiment was very good. More importantly, however, it was shown that the measurement was yielded a very sensitive technique for obtaining the narrowing parameter that describes the deviation of Oxygen A-band lines from the Voigt profile. In particular, it was seen that the best fits were obtained consistently when the narrowing parameter value used was 0.022 1/cm, 1/Atm, Previous work, upon which the current work was based has resulted in several accurate measurements of properties of particular lines of the Oxygen A band. For example, this work has resulted in the measurement of the collision cross sections of several lines including the RQ(13,14) and the RR(15,15) lines. A major achievement of achievement of the work was also the demonstration that the technique we have developed can accurately probe the structure of the absorption lineshape function. In particular, the method we have developed is very well suited for experimentally probing the characteristics of lines in their wings. This work was accepted for publication in the Journal of Applied Physics, and is scheduled to appear in the December 15, 1998 issue.

Dharamsi, Amin N.↗

The extended atmosphere and circumstellar environment of the cool evolved star VX Sagittarii as seen by MATISSE

Context. VX Sgr is a cool, evolved, and luminous red star whose stellar parameters are difficult to determine, which affects its classification. Aims. We aim to spatially resolve the photospheric extent as well as the circumstellar environment. Methods. We used interferometric observations obtained with the MATISSE instrument in the L (3–4 μm), M (4.5–5 μm), and N (8–13 μm) bands. We reconstructed monochromatic images using the MIRA software. We used 3D radiation-hydrodynamics simulations carried out with CO5BOLD and a uniform disc model to estimate the apparent diameter and interpret the stellar surface structures. Moreover, we employed the radiative transfer codes OPTIM3D and RADMC3D to compute the spectral energy distribution for the L, M, and N bands, respectively. Results. MATISSE observations unveil, for the first time, the morphology of VX Sgr across the L, M, and N bands. The reconstructed images show a complex morphology with brighter areas whose characteristics depend on the wavelength probed. We measured the angular diameter as a function of the wavelength and showed that the photospheric extent in the L and M bands depends on the opacity through the atmosphere. In addition to this, we also concluded that the observed photospheric inhomogeneities can be interpreted as convection-related surface structures. The comparison in the N band yielded a qualitative agreement between the N-band spectrum and simple dust radiative transfer simulations. However, it is not possible to firmly conclude on the interpretation of the current data because of the difficulty in constraing the model parameters using the limited accuracy of our absolute flux calibration. Conclusions. MATISSE observations and the derived reconstructed images unveil the appearance of VX Sgr’s stellar surface and circumstellar environment across a very large spectral domain for the first time.

stars: atmospheres↗

Structural Characterization of Doped GaSb Single Crystals by X-ray Topography

We characterized GaSb single crystals containing different dopants (Al, Cd and Te), grown by the Czochralski method, by x-ray topography and high angular resolution x-ray diffraction. Lang topography revealed dislocations parallel and perpendicular to the crystal's surface. Double-crystal GaSb 333 x-ray topography shows dislocations and vertical stripes than can be associated with circular growth bands. We compared our high-angular resolution x-ray diffraction measurements (rocking curves) with the findings predicted by the dynamical theory of x-ray diffraction. These measurements show that our GaSb single crystals have a relative variation in the lattice parameter ({Delta}d/d) on the order of 10{sup -5}. This means that they can be used as electronic devices (detectors, for example) and as x-ray monochromators.

43 PARTICLE ACCELERATORS↗

Half-metallicity and stability of the rock salt BaC and SrC (111) surfaces: A density functional study

The electronic structure and magnetic properties of relaxed (111) surfaces of the alkaline-earth monocarbides BaC and SrC in the stable rock salt structure, are calculated on the basis of first principle density functional theory within the framework of self-consistent field plane wave pseudo-potential method, using the generalized gradient approximation for the exchange-correlation functional. The results of this study reveal that the C-terminated (111) surfaces retain the bulk half-metallic property in both BaC and SrC. The half-metallicity of the C-terminated BaC surface is found to be more robust compared to the bulk BaC due to the larger half-metallic energy gap. In contrast, the half-metallic energy gap of the C-terminated SrC surface is found to be smaller than that of the bulk. The Ba-terminated surface of BaC and the Sr-terminated surface of SrC, however, lose their bulk half-metallicity due to the formation of surface states in the majority spin band gap. The calculations also show that the atomic magnetic moments at the half-metallic C-terminated surfaces in both BaC and SrC increase considerably with respect to the corresponding bulk values, which is explained in terms of an increase in the number of unpaired 2p electrons of the carbon atom at the surface. We also discuss the stability of the surfaces via the calculated bulk formation energies. The bulk formation energies for both BaC and SrC in the rock salt structure are found to be positive, which indicate that the surfaces are not stable at normal pressure and temperature conditions, and non-equilibrium growth techniques may be required for the realization of BaC and SrC thin films.

74 ATOMIC AND MOLECULAR PHYSICS↗

Phonon properties of nanosized MnWO{sub 4} with different size and morphology

Highly hierarchical barlike and flowerlike MnWO{sub 4} microcrystals have been synthesized for the first time by a hydrothermal method, where ethanolamine (EA) and cetyltrimethylamonnium bromide (CTAB) play important roles in directing growth and self-assembly of these structures. The possible formation process has been proposed. In addition, platelike nanosized MnWO{sub 4} was also synthesized by annealing of a precursor obtained by coprecipitation method. The obtained samples were characterized by XRD, SEM, TEM, Raman and IR methods. Raman spectra showed relatively weak dependence on particle size and morphology of the particles. In contrast to this behavior, IR-active bands showed pronounced shifts and changes in relative intensities on particle size and the morphology. Origin of this behavior is discussed. - Graphical Abstract: SEM images of MnWO{sub 4} particles prepared by hydrothermal process at 150 deg. C (left panel) and 200 deg. C (right panel). Highlights: > Hydrothermal synthesis with ethanolamine enables growth of hierarchical nanosized MnWO{sub 4} particles. > Annealing of a precursor obtained by coprecipitation method enables growth of platelike MnWO{sub 4} nanoparticles. > Raman and IR spectra of MnWO{sub 4} nanoparticles depend on both size and morphology of the nanoparticles. > We discuss origin of this behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of Mg{sub x}Cd{sub 1−x}O applying density functional theory: Stability, structural phase transition and electronic properties

Stability of B1 and B2 phases of Mg{sub x}Cd{sub 1−x}O is studied by calculating the formation energy within the framework of density functional theory applying the crystalline-orbital program package. Structural and electronic properties of the two polymorphs are reported for x=0.25, 0.50 and 0.75. The equilibrium lattice constants and bulk moduli are computed. Enthalpy calculations show pressure induced B1→B2 phase transitions at 92 GPa, 138 GPa and 212 GPa, respectively, for Mg{sub 0.25}Cd{sub 0.75}O, Mg{sub 0.50}Cd{sub 0.50}O and Mg{sub 0.75}Cd{sub 0.25}O compositions. Formation energy of ternary oxides in the B1 phase is negative with respect to mixing of B2-MgO with B1-CdO. Mixing B1-MgO with B2-CdO also leads to negative formation energy in Cd rich B1 phase ternary oxides (0≤x≤0.5). Band structure calculations predict direct band gaps in the B1 phase and indirect band gaps in the B2 phase ternary oxides. Mulliken population analysis is performed for the two polymorphs to study the charge transfer. - Graphical abstract: Diagram reveals trends in formation energy while mixing B2-MgO with B1-CdO to form B1-Mg{sub x}Cd{sub 1−x}O. Formation energies obtained from mixing isostructural and nonisostructural components are also shown. Display Omitted - Highlights: • Lattice constants and bulk moduli are computed for Mg{sub 0.25}Cd{sub 0.75}O, Mg{sub 0.50}Cd{sub 0.50}O and Mg{sub 0.75}Cd{sub 0.25}O compositions. • Enthalpy calculations signify pressure induced B1→B2 phase transitions at 92 GPa, 138 GPa and 212 GPa, respectively, in Mg{sub 0.25}Cd{sub 0.75}O, Mg{sub 0.50}Cd{sub 0.50}O and Mg{sub 0.75}Cd{sub 0.25}O. • Band structure calculations predict direct band gaps in the B1 phase ternary oxides. • In the B2 phase ternary oxides band structure calculations show valence band maximum along the Γ–X direction and the conduction band minimum at the Γ point of symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis and study of an inorganic-organic hybrid vanadate of a nickel(II) coordination complex with pyrazine, Ni{sub 3}(C{sub 4}H{sub 4}N{sub 2}){sub 3}(V{sub 8}O{sub 23})

Highlights: {yields} A novel inorganic-organic hybrid vanadate of nickel(II) coordination complex with pyrazine has been synthesized hydrothermally. {yields} The thermal and spectroscopic behavior has been studied. {yields} The compound shows AFM interactions which has been fitted to a magnetic model of lineal chains. -- Abstract: The three-dimensional hybrid compound Ni{sub 3}(C{sub 4}H{sub 4}N{sub 2}){sub 3}(V{sub 8}O{sub 23}) has been synthesized by mild hydrothermal methods under autogenous pressure at 170 {sup o}C. The structure of the phase is stable until 380 {sup o}C. The removal of the pyrazine molecules from the structure induces its collapse. The IR spectrum shows the vibration modes of the pyrazine molecule and those of the [VO{sub 4}]{sup 3-} groups. A UV-visible spectrum shows the characteristic bands of the Ni(II) d{sup 8}-high-spin cation in a slightly distorted octahedral coordination. Magnetic measurements indicate the existence of antiferromagnetic interactions that can be fitted with a chain model to give g = 2.31, J/k = -5.3, and zJ'/k = -5.5.

36 MATERIALS SCIENCE↗

Facile preparation of sphere-like copper ferrite nanostructures and their enhanced visible-light-induced photocatalytic conversion of benzene

Graphical abstract: - Highlights: • Spinel CuFe{sub 2}O{sub 4} nanospheres were successfully synthesized via a facile method. • CuFe{sub 2}O{sub 4} nanospheres showed high photocatalytic activity toward benzene. • Ethyl acetate, carboxylic acid and aldehyde were the intermediate products. - Abstract: Spinel copper ferrite nanospheres with diameters of about 116 nm were synthesized in high yield via a facile solvothermal route. The prepared nanospheres had cubic spinel structure and exhibited good size uniformity and regularity. The band-gap energy of CuFe{sub 2}O{sub 4} nanospheres was calculated to be about 1.69 eV, indicating their potential visible-light-induced photocatalytic activity. The dramatically enhanced photocatalytic activity of the CuFe{sub 2}O{sub 4} nanospheres was evaluated via the photocatalytic conversion of benzene under Xe lamp irradiation. By using the in situ FTIR technique, ethyl acetate, carboxylic acid and aldehyde could be regarded as the intermediate products, and CO{sub 2} was produced as the final product during the reaction process. This study provided new insight into the design and preparation of functional nanomaterials with sphere structure in high yield, and the as-grown architectures demonstrated an excellent ability to remove organic pollutants in the atmosphere.

36 MATERIALS SCIENCE↗

Effect of Ni doping on structural and optical properties of Zn{sub 1−x}Ni{sub x}O nanopowder synthesized via low cost sono-chemical method

Highlights: • Pure and Ni doped ZnO nanopowders were synthesized by low cost sonochemical method. • The optical properties of Zn{sub 1−x}Ni{sub x}O nanopowders can be tuned by varying Ni content. • The results reveal the solubility limit of Ni into ZnO matrix as below 8%. - Abstract: Zn{sub 1−x}Ni{sub x}O nanopowders with different Ni contents of x = 0.0, 0.04 and 0.08 were synthesized via cost effective sonochemical reaction method. X-ray diffraction (XRD) pattern reveals pure wurtzite phase of prepared nanostructures with no additional impurity peaks. The morphology and dimensions of nanoparticles were investigated using scanning electron microscope (SEM). A sharp and strong peak for first order optical mode for wurtzite zinc oxide (ZnO) structure was observed at ∼438 cm{sup −1} in Raman spectra. The calculated optical band gap (E{sub g}) from UV–vis transmission data was found to decrease with increase in Ni content. The observed red shift in E{sub g} with increasing Ni content in ZnO nanopowders were in agreement with band gap behaviours found in their photoluminescence (PL) spectra. The synthesised ZnO nanopowders with controlled band gap on Ni doping reveals their potential for use in various electronic and optical device applications. The results were discussed in detail.

77 NANOSCIENCE AND NANOTECHNOLOGY↗