Search NASA⌕ Search

SEARCH · Search NASA

Results for “CASE METHOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Radiotherapy of Painful Vertebral Hemangiomas: The Single Center Retrospective Analysis of 137 Cases

Purpose: An evaluation of dose-response relationship and an attempt to define predictive factors. Methods and Materials: A total of 137 cases of painful vertebral hemangioma irradiations (101 patients). Fraction dose (fd) varied from 2 to 15 Gy (123 fractionated and 14 radiosurgical treatments), and total dose (TD) from 8 to 30 Gy (111 cases irradiated with fd of 2 GY to TD of 24 Gy). We evaluated pain relief, changes in analgesic requirements, and reossification. Results: Means of pain relief 1, 6, 12, and 18 months after radiotherapy (defined as a decrease of primary pain level expressed in percent) were 60.5%, 65.4%, 68.3%, and 78.4%, respectively. Proportion of patients with no need for analgesics and patients using tramadol were 39%, 40%, 44%, 57%, and 20%, 17%, 22%, and 11% in these times. The proportion of patients experiencing complete/partial pain relief changed from 36/48% 1 month, to 64/22% 1.5 years after radiotherapy. No impact of radiotherapy on reossification was found. The positive impact of fd and TD increase for analgesics uptake reduction and pain relief was found. An increase of the fd by 1 Gy results in 27% chance of analgesics uptake reduction and 3.8% reduction of pain, whereas 14% analgesics uptake reduction and 2.2% of pain reduction in case of the TD. The predictive factors improving results were found: female gender, older age, better performance states (the chance of the lower analgesic treatment decreases over 2.5 times in comparison to the higher Zubrod degree), bigger Hb concentration, shorter symptoms duration and lower analgesics uptake before radiotherapy. Conclusions: The obtained data support the efficacy of radiotherapy in improving pain secondary to vertebral hemangioma, with the degree of pain amelioration being related to increasing fd and TD. The positive predictive factors were defined: female gender, older age, better performance status, increased Hb concentration, shorter symptoms duration, and lower analgesics uptake before radiotherapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Electromagnetic Analysis of ITER Electron Cyclotron Emission Model

The ITER electron cyclotron emission (ECE) diagnostic system is located at diagnostics shielding module 2 (DSM2), equatorial port 9 (EP9), to measure electron temperature profile and electron temperature fluctuations, and also assess nonthermal electron distributions via the oblique view. Therefore, ECE has both radial and oblique views with two hot sources for calibration and two couples of mirrors for two different optical views. It shall receive that the large electromagnetic (EM) loads up to 100-MN/m3 force density due to the eddy currents on the copper mirrors generated by the short transient plasma disruption. The simplified EM analysis model using magnetic field ( B ) data and flux variations (dB/dt) method based on the worst case of plasma disruption, MD_DW_EXP16MS_CATIII, has been developed to calculate the force and moments for each ECE component and support structure for EP9 DSM2 Bay2 and Bay3. The B and dB/dt methods use the constant B and dB/dt assumed for each local bay space, but the real B and dB/dt are basically varied along the radial direction of each bay. The complex global model with the local ECE components and support structure using Maxwell transient has been developed to do EM analysis to compare the results of the B and dB/dt models. The volumetric EM force density of the whole ECE components and support structure can be used for the subsequent structural analysis. In conclusion, combined with the thermal and nuclear loads and seismic and initial loads, the ECE integration analysis can be finalized for the operation case.

Fang, J. [Princeton Plasma Physics Laboratory (PPP↗

Interlocked optimization and fast gradient algorithm for a seismic inverse problem

Highlights: {yields} A 2D extension of the 1D nonlinear inversion of well-seismic data is given. {yields} Appropriate regularization yields a well-determined large scale inverse problem. {yields} An interlocked optimization loop acts as an efficient preconditioner. {yields} The adjoint state method is used to compute the misfit function gradient. {yields} Domain decomposition method yields an efficient parallel implementation. - Abstract: We give a nonlinear inverse method for seismic data recorded in a well from sources at several offsets from the borehole in a 2D acoustic framework. Given the velocity field, approximate values of the impedance are recovered. This is a 2D extension of the 1D inversion of vertical seismic profiles . The inverse problem generates a large scale undetermined ill-conditioned problem. Appropriate regularization terms render the problem well-determined. An interlocked optimization algorithm yields an efficient preconditioning. A gradient algorithm based on the adjoint state method and domain decomposition gives a fast parallel numerical method. For a realistic test case, convergence is attained in an acceptable time with 128 processors.

97 MATHEMATICS AND COMPUTING↗

Partition-of-unity finite-element method for large scale quantum molecular dynamics on massively parallel computational platforms

Over the course of the past two decades, quantum mechanical calculations have emerged as a key component of modern materials research. However, the solution of the required quantum mechanical equations is a formidable task and this has severely limited the range of materials systems which can be investigated by such accurate, quantum mechanical means. The current state of the art for large-scale quantum simulations is the planewave (PW) method, as implemented in now ubiquitous VASP, ABINIT, and QBox codes, among many others. However, since the PW method uses a global Fourier basis, with strictly uniform resolution at all points in space, and in which every basis function overlaps every other at every point, it suffers from substantial inefficiencies in calculations involving atoms with localized states, such as first-row and transition-metal atoms, and requires substantial nonlocal communications in parallel implementations, placing critical limits on scalability. In recent years, real-space methods such as finite-differences (FD) and finite-elements (FE) have been developed to address these deficiencies by reformulating the required quantum mechanical equations in a strictly local representation. However, while addressing both resolution and parallel-communications problems, such local real-space approaches have been plagued by one key disadvantage relative to planewaves: excessive degrees of freedom (grid points, basis functions) needed to achieve the required accuracies. And so, despite critical limitations, the PW method remains the standard today. In this work, we show for the first time that this key remaining disadvantage of real-space methods can in fact be overcome: by building known atomic physics into the solution process using modern partition-of-unity (PU) techniques in finite element analysis. Indeed, our results show order-of-magnitude reductions in basis size relative to state-of-the-art planewave based methods. The method developed here is completely general, applicable to any crystal symmetry and to both metals and insulators alike. We have developed and implemented a full self-consistent Kohn-Sham method, including both total energies and forces for molecular dynamics, and developed a full MPI parallel implementation for large-scale calculations. We have applied the method to the gamut of physical systems, from simple insulating systems with light atoms to complex d- and f-electron systems, requiring large numbers of atomic-orbital enrichments. In every case, the new PU FE method attained the required accuracies with substantially fewer degrees of freedom, typically by an order of magnitude or more, than the current state-of-the-art PW method. Finally, our initial MPI implementation has shown excellent parallel scaling of the most time-critical parts of the code up to 1728 processors, with clear indications of what will be required to achieve comparable scaling for the rest. Having shown that the key remaining disadvantage of real-space methods can in fact be overcome, the work has attracted significant attention: with sixteen invited talks, both domestic and international, so far; two papers published and another in preparation; and three new university and/or national laboratory collaborations, securing external funding to pursue a number of related research directions. Having demonstrated the proof of principle, work now centers on the necessary extensions and optimizations required to bring the prototype method and code delivered here to production applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An analytical solution of the time-independent Schrödinger equation for the Woods-Saxon potential for arbitrary angular momentum l states

The Woods-Saxon potential is probably the most studied and widely used short range potential in all of nuclear physics. For the angular momentum l= 0 case, Flügge had devised a method to obtain an analytical expression for the bound state energies of the radial time-independent Schrödinger equation for a neutron confined in a Woods-Saxon potential well. In this study, we extend Flügge's method to solve the radial Schrödinger equation for a neutron within the Woods-Saxon potential and the centrifugal potential for arbitrary values of l. Here, the Pekeris method is used to deal with the centrifugal term. We obtain an analytical expression for the bound states, valid for arbitrary angular momentum, and show that our expression reduces to that of Flügge, which applies to the l= 0 case. The numerical computations performed also show very good agreement with our analytical expression.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SU-F-T-682: In-Vivo Simulation of the Relative Biological Effectiveness in Proton Therapy Using a Monte Carlo Method

Purpose: In proton therapy, the relative biological effectiveness (RBE) – compared with conventional photon therapy – is routinely set to 1.1. However, experimental in vitro studies indicate evidence for the variability of the RBE. To clarify the impact on patient treatment, investigation of the RBE in a preclinical case study should be performed. Methods: The Monte Carlo software TOPAS was used to simulate the radiation field of an irradiation setup at the experimental beamline of the proton therapy facility (OncoRay) in Dresden, Germany. Simulations were performed on cone beam CT-data (CBCT) of a xenogeneous mouse with an orthotopic lung carcinoma obtained by an in-house developed small animal image-guided radiotherapy device. A homogeneous physical fraction dose of 1.8Gy was prescribed for the contoured tumor volume. Simulated dose and linear energy transfer distributions were used to estimate RBE values in the mouse based on an RBE model by Wedenberg et al. To characterize radiation sensitivity of normal and tumor tissue, α/β-ratios were taken from the literature for NB1RGB (10.1Gy) and human squamous lung cancer (6.2Gy) cell lines, respectively. Results: Good dose coverage of the target volume was achieved with a spread-out Bragg peak (SOBP). The contra-lateral lung was completely spared from receiving radiation. An increase in RBE towards the distal end of the SOBP from 1.07 to 1.35 and from 1.05 to 1.3 was observed when considering normal tissue and tumor, respectively, with the highest RBE values located distal to the target volume. Conclusion: Modeled RBE values simulated on CBCT for experimental preclinical proton therapy varied with tissue type and depth in a mouse and differed therefore from a constant value of 1.1. Further translational work will include, first, conducting preclinical experiments and, second, analogous RBE studies in patients using experimentally verified simulation settings for our clinically used patient-specific beam conforming technique.

60 APPLIED LIFE SCIENCES↗

Finite element analysis of the PWR control rod absorber thermal evaluation

The RCCAs (Rod Cluster Control Assembly) are part of the reactor control systems and are designed to adjust the reactivity by neutron absorption. In PWR, a RCCA is composed of a spider holding 24 control rods. During operation, the absorber stacks are heated up by neutron and γ-ray radiation. This paper describes the PWR control rod absorber temperature analysis model in details, derives the theoretical equations, and presents a FEA model for control rod absorber thermal evaluation. The FEA model is based on finite element analysis and on 3 major assumptions: 1) steady-state condition, 2) the thermal conductivities of absorber, cladding and gas are assumed to be constant, and 3) thermal expansion and radiation are neglected. The control rod of an AFA 3G fuel assembly in Ningde NPP unit 1 and 2 in steady state on condition I operation was used as a case to qualify the FEA method. A special software named CRABE, designed and qualified by AREVA, was used to do the same analysis for comparison. Several conclusions can be drawn. First, compared with traditional methods, FEA is more convenient with higher accuracy and can greatly simplify the calculation process. In addition, the FEA software is always ease to use, with a friendly interface and a more intuitive display of results. Secondly, the FEA model was qualified though a practical case calculated in different ways. Thirdly, when it comes to a special structure such as an eccentric absorber or an oval cladding, the FEA model has a great applicability, while traditional methods are difficult to use.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Incidence of non-lung solid cancers in Czech uranium miners: A case-cohort study

Objectives: Uranium miners are chronically exposed to radon and its progeny, which are known to cause lung cancer and may be associated with leukemia. This study was undertaken to evaluate risk of non-lung solid cancers among uranium miners in Pribram region, Czech Republic. Methods: A retrospective stratified case-cohort study in a cohort of 22,816 underground miners who were employed between 1949 and 1975. All incident non-lung solid cancers were ascertained among miners who worked underground for at least 12 months (n=1020). A subcohort of 1707 subjects was randomly drawn from the same population by random sampling stratified on age. The follow-up period lasted from 1977 to 1996. Results: Relative risks comparing 180 WLM (90th percentile) of cumulative lifetime radon exposure to 3 WLM (10th percentile) were 0.88 for all non-lung solid cancers combined (95% CI 0.73-1.04, n=1020), 0.87 for all digestive cancers (95% CI 0.69-1.09, n=561), 2.39 for gallbladder cancer (95% CI 0.52-10.98, n=13), 0.79 for larynx cancer (95% CI 0.38-1.64, n=62), 2.92 for malignant melanoma (95% CI 0.91-9.42, n=23), 0.84 for bladder cancer (95% CI 0.43-1.65, n=73), and 1.13 for kidney cancer (95% CI 0.62-2.04, n=66). No cancer type was significantly associated with radon exposure; only malignant melanoma and gallbladder cancer showed elevated but non-significant association with radon. Conclusions: Radon was not significantly associated with incidence of any cancer of interest, although a positive association of radon with malignant melanoma and gallbladder cancer cannot be entirely ruled out. - Research highlights: {yields} Uranium miners are chronically exposed to radon. {yields} We evaluate risk of non-lung solid cancers among uranium miners. {yields} No cancer type was significantly associated with radon exposure. {yields} Malignant melanoma and gallbladder cancer showed non-significant elevated risk.

61 RADIATION PROTECTION AND DOSIMETRY↗

A method for predicting the noise levels of coannular jets with inverted velocity profiles

A coannular jet was equated with a single stream equivalent jet with the same mass flow, energy, and thrust. The acoustic characteristics of the coannular jet were then related to the acoustic characteristics of the single jet. Forward flight effects were included by incorporating a forward exponent, a Doppler amplification factor, and a Strouhal frequency shift. Model test data, including 48 static cases and 22 wind tunnel cases, were used to evaluate the prediction method. For the static cases and the low forward velocity wind tunnel cases, the spectral mean square pressure correlation coefficients were generally greater than 90 percent, and the spectral sound pressure level standard deviation were generally less than 3 decibels. The correlation coefficient and the standard deviation were not affected by changes in equivalent jet velocity. Limitations of the prediction method are also presented.

Russell, J. W.↗

Fast and Efficient Stochastic Optimization for Analytic Continuation

In this analytic continuation of imaginary-time quantum Monte Carlo data to extract real-frequency spectra remains a key problem in connecting theory with experiment. Here we present a fast and efficient stochastic optimization method (FESOM) as a more accessible variant of the stochastic optimization method introduced by Mishchenko et al. [Phys. Rev. B 62, 6317 (2000)], and we benchmark the resulting spectra with those obtained by the standard maximum entropy method for three representative test cases, including data taken from studies of the two-dimensional Hubbard model. Genearally, we find that our FESOM approach yields spectra similar to the maximum entropy results. In particular, while the maximum entropy method yields superior results when the quality of the data is strong, we find that FESOM is able to resolve fine structure with more detail when the quality of the data is poor. In addition, because of its stochastic nature, the method provides detailed information on the frequency-dependent uncertainty of the resulting spectra, while the maximum entropy method does so only for the spectral weight integrated over a finite frequency region. Therefore, we believe that this variant of the stochastic optimization approach provides a viable alternative to the routinely used maximum entropy method, especially for data of poor quality.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact Testing of Composites for Aircraft Engine Fan Cases

Before composite materials can be considered for use in the fan case of a commercial jet engine, the performance of a composite structure under blade-out loads needs to be demonstrated. The objective of this program is to develop an efficient test and analysis method for evaluating potential composite case concepts. Ballistic impact tests were performed on laminated glass/epoxy composites in order to identify potential failure modes and to provide data for analysis. Flat 7x7 in. panels were impacted with cylindrical titanium projectiles, and 15 in. diameter half-rings were impacted with wedge-shaped titanium projectiles. Composite failure involved local fiber fracture as well as tearing and delamination on a larger scale. A 36 in. diameter full-ring subcomponent was proposed for larger scale testing. Explicit, transient, finite element analyses were used to evaluate impact dynamics and subsequent global deformation for the proposed full-ring subcomponent test. Analyses on half-ring and quarter ring configurations indicated that less expensive smaller scale tests could be used to screen potential composite concepts when evaluation of local impact damage is the primary concern.

Roberts, Gary D.↗

Improved accuracy in quantitative laser-induced breakdown spectroscopy using sub-models

We report that accurate quantitative analysis of diverse geologic materials is one of the primary challenges faced by the Laser-Induced Breakdown Spectroscopy (LIBS)-based ChemCam instrument on the Mars Science Laboratory (MSL) rover. The SuperCam instrument on the Mars 2020 rover, as well as other LIBS instruments developed for geochemical analysis on Earth or other planets, will face the same challenge. Consequently, part of the ChemCam science team has focused on the development of improved multivariate analysis calibrations methods. Developing a single regression model capable of accurately determining the composition of very different target materials is difficult because the response of an element’s emission lines in LIBS spectra can vary with the concentration of other elements. We demonstrate a conceptually simple “submodel” method for improving the accuracy of quantitative LIBS analysis of diverse target materials. The method is based on training several regression models on sets of targets with limited composition ranges and then “blending” these “sub-models” into a single final result. Tests of the sub-model method show improvement in test set root mean squared error of prediction (RMSEP) for almost all cases. Lastly, the sub-model method, using partial least squares regression (PLS), is being used as part of the current ChemCam quantitative calibration, but the sub-model method is applicable to any multivariate regression method and may yield similar improvements.

47 OTHER INSTRUMENTATION↗

Sulfonated Aromatic Polypentenamers: Scope of the Acetyl Sulfate Reaction

A precision polymer featuring one phenyl pendant at every fifth carbon on a polyethylene backbone was modified to varying degrees of sulfonation (DS = 33–98%) using acetyl sulfate with standard conditions by varying reaction times (up to 48 h). This soft, homogeneous method allows for evenly distributed phenylsulfonic acid groups with minimal side reactions and results in light brown, transparent materials with glass transition temperatures of 33–78 °C that increase with DS and parent polymer molar mass. The DS was accurately determined through well-resolved 1 H NMR (DSHNMR) signals of the regularly spaced phenyl groups and corroborated by inverse-gated decoupling 13 C NMR analysis. These analyses were compared to a series of other commonly accepted methods for DS determination including titration and elemental analysis (EA). The DS by titration (DS titr ) also increased with reaction time but was consistently lower than those determined by NMR. Significant discrepancies between theoretical and measured sulfur mass were observed for several samples through EA. Qualitative methods, such as infrared spectroscopy and thermal analyses, were also performed and correlated well with the DS determined by NMR. Here, this study presents a promising method to achieve a complete scope of homogeneous sulfonation from mild reaction conditions and presents a case to determine DS through multiple methods, with spectroscopic analyses, such as NMR, being potentially the most valuable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of interply damping layers on the dynamic response of composite structures

Integrated damping mechanics for composite laminates with interlaminar constrained layers of damping polymer materials are developed. Discrete layer damping mechanics for composite laminates with damping layers, in connection with a semi-analytical method for predicting the modal damping in simply-supported specialty composite plates are presented. Application cases demonstrate the advantages of the method. Damping predictions for graphite/epoxy composite plates of various laminations demonstrate the potential for higher damping than geometrically equivalent aluminum plates. The effects of aspect ratio, damping layer thickness, and fiber volume ratio on static and dynamic characteristics of the composite plate are also investigated.

Saravanos, D. A.↗

Computation of the two-dimensional flow in a laminar boundary layer

A comparison is made of the boundary-layer flow computed by the approximate method developed by K. Pohlhausen with the exact solutions which have been published for several special cases. A modification of Pohlhausen's method has been developed which extends the range of application at the expense of some decrease in the accuracy of the approximations.

Dryden, Hugh L↗

Analytic techniques for solving the transport equations in electroweak baryogenesis

We develop an efficient method for solving transport equations, particularly in the context of electroweak baryogenesis. It provides fully-analytical results under mild approximations and can also test semi-analytical results, which are applicable in more general cases. Key elements of our method include the reduction of the second-order differential equations to first order, representing the set of coupled equations as a block matrix of the particle densities and their derivatives, identification of zero modes, and block decomposition of the matrix. We apply our method to calculate the baryon asymmetry of the Universe (BAU) in a Standard Model effective field theory framework of complex Yukawa couplings to determine the sensitivity of the resulting BAU to modifications of various model parameters and rates, and to estimate the effect of the commonly-used thin-wall approximation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparative Analysis of Standard and Advanced USL Methodologies [Slides]

This presentation is on the comparative analysis of standard and advanced USL methodologies. Each method has a different way to address/account for experimental biases and uncertainties. This study showed why bias and uncertainty predictions by these popular methods differ significantly in some cases. In order to establish confidence to our validation efforts, especially with new reactor concepts, in designing new critical experiments and claiming experimental coverage for our existing applications, we need to understand capabilities of our methods further.

97 MATHEMATICS AND COMPUTING↗

Probabilistic Reasoning for Plan Robustness

A planning system must reason about the uncertainty of continuous variables in order to accurately project the possible system state over time. A method is devised for directly reasoning about the uncertainty in continuous activity duration and resource usage for planning problems. By representing random variables as parametric distributions, computing projected system state can be simplified in some cases. Common approximation and novel methods are compared for over-constrained and lightly constrained domains. The system compares a few common approximation methods for an iterative repair planner. Results show improvements in robustness over the conventional non-probabilistic representation by reducing the number of constraint violations witnessed by execution. The improvement is more significant for larger problems and problems with higher resource subscription levels but diminishes as the system is allowed to accept higher risk levels.

autonomous planning↗