Search NASA⌕ Search

SEARCH · Search NASA

Results for “Component sizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Fulde-Ferrell-Larkin-Ovchinnikov states and quantum oscillations in mesoscopic superconductors and superfluid ultracold Fermi gases

We have studied the distinctive features of the Fulde-Ferrel-Larkin-Ovchinnikov (FFLO) instability and phase transitions in two-dimensional (2D) mesoscopic superconductors placed in magnetic field of arbitrary orientation and rotating superfluid Fermi gases with imbalanced state populations. Using a generalized version of the phenomenological Ginzburg-Landau theory we have shown that the FFLO states are strongly modified by the effect of the trapping potential confining the condensate. The phenomenon of the inhomogeneous state formation is determined by the interplay of three length scales: (i) length scale of the FFLO instability; (ii) 2D system size; (iii) length scale associated with the orbital effect caused either by the Fermi condensate rotation or magnetic field component applied perpendicular to the superconducting disk. We have studied this interplay and resulting quantum oscillation effects in both superconducting and superfluid finite-size systems with FFLO instability and described the hallmarks of the FFLO phenomenon in a restricted geometry. The finite size of the system is shown to affect strongly the conditions of the observability of switching between the states with different vorticities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nucleus and nucleus-cytoskeleton connections in 3D cell migration

Cell migration plays an important role in many physiological and pathological settings, ranging from embryonic development to cancer metastasis. Currently, accumulating data suggest that cells migrating in three-dimensional (3D) environments show well-defined differences compared to their well-established two-dimensional (2D) counterparts. During 3D migration, the cell body and nucleus must deform to allow cellular passage through the available spaces, and the deformability of the relatively rigid nucleus may constitute a limiting step. Here, we highlight the key evidence regarding the role of the nuclear mechanics in 3D migration, including the molecular components that govern the stiffness of the nucleus and review how the nuclear dynamics are connected to and controlled by cytoskeleton-based migration machinery. Intriguingly, nuclear movement must be coordinated with the cytoskeletal dynamics at the leading and trailing edges, which in turn impact the cytoplasmic dynamics that affect the migration efficiency. Thus, we suggest that alterations in the nuclear structure may facilitate cellular reorganizations that are necessary for efficient migration. - Graphical abstract: Schematic representations of a cell migrating on a 2D substrate and a cell migrating in a 3D extracellular matrix environment. (A) Nucleus-cytoskeleton connections are essential to 3D migration. Mechanical signals are transduced by integrins at the cell surface and channeled to cytoskeletal proteins, which generates prestress. The nucleus-cytoskeleton connections can either act as a stable skeleton to anchor the nuclei or provide active force to move the nuclei. The LINC complex is responsible for the nucleo-cytoskeletal coupling. Nesprins connect the cytoskeletal proteins to the inner nuclear membrane proteins SUN1 and SUN2. The SUN proteins connect to the lamins that form the lamina, which attaches to the chromatin. This physical connectivity transmits the mechanical signals from receptors at the cell membrane through the cytoskeletal architecture to the nucleus and into the chromosomes. On a 2D substrate (B), the nucleus can be subjected to tensional forces emanating from the stress fibers and compressive forces due to the actin cap structures and the resistance of the surface. In a 3D environment (C), the migration process requires reshaping of the nucleus and squeezing it through narrow openings in the ECM. During this process the cells may also experience both tension generated by the actomyosin filaments and compression resulting from the high pressure of the anterior compartment. - Highlights: • The influence of nuclear size and stiffness in cell migration is discussed. • We describe molecular components that govern the mechanical properties of the nucleus. • We discuss the roles of chromatin, lamin A/C in nuclear mechanical properties and cell migration. • We review how nuclear dynamics are connected to cytoskeleton. • We discuss the role of nucleo-cytoskeletal coupling in cell migration.

60 APPLIED LIFE SCIENCES↗

Integrated Power Chip Converter for Solid State Lighting (Final Report)

The overall goal of the project was to develop an integrated power converter chip for solid-state lighting. We developed a low component count circuit topology, fast and low loss switching devices, compact and low loss passive components, and integration methodology to enable an integrated LED driver, where cost, size and efficiency are paramount. The converter was designed to operate directly from ac line voltage, nominally providing 24 V output at 25 W with features of dimming and control for light uniformity. We developed a power circuit and control suitable for chip-scale integration, low loss and high frequency GaN power devices with a new vertical architecture that reduces parasitics and lowers cost by decreasing the chip real estate, and high-density passives, including a chip-scale flyback transformer that integrates inductor and transformer action into a single component.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Effective electrostatic interactions among charged thermo-responsive microgels immersed in a simple electrolyte

This work explores the nature and thermodynamic behavior of the effective electrostatic interactions among charged microgels immersed in a simple electrolyte, taking special interest in the effects due to the thermally induced variation of the microgel size while the remaining parameters (microgel charge and concentration, plus the amount of added salt) are kept constant. To this end, the rigorous approach obtained from applying the precise methodology of the dressed ion theory to the proper definition of the effective direct correlation functions, which emerge from tracing-out the degrees of freedom of the microscopic ions, is employed to provide an exact description of the parameters characterizing such interactions: screening length, effective permittivity, and renormalized charges. A model solution with three components is assumed: large permeable anionic spheres for the microgels, plus small charged hard spheres of equal size for the monovalent cations and anions. The two-body correlations among the components of this model suspension, used as the input for the determination of the effective interaction parameters, are here calculated by using the hyper-netted chain approximation. It is then found that at finite microgel concentrations the values of these parameters change as the microgel size increases, even though the ionic strength of the supporting electrolyte and the bare charge of the microgels remain fixed during this process. The variation of the screening length, as well as that of the effective permittivity, is rather small, but still interesting in view of the fact that the corresponding Debye length stays constant. The renormalized charges, in contrast, increase markedly as the microgels swell. The ratio of the renormalized charge to the corresponding analytic result obtained in the context of an extended linear response theory allows us to introduce an effective charge that accounts for the non-linear effects induced by the short-ranged association of microions to the microgels. The behavior of these effective charges as a function of the amount of added salt and the macroion charge, size, and concentration reveals the interplay among all these system parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SU-F-J-172: Hybrid MR/CT Compatible Phantom for MR-Only Based Radiotherapy

Purpose: Development of hybrid MR/CT compatible phantom was introduced to fully establish MR image only radiation treatment and this suggested technique using in-house developed hybrid MR/CT compatible phantom image would utilize to generate radiation treatment planning and perform dose calculation without multi-modal registration process or generation of pseudo CT. Methods: Fundamental characteristics for “hybrid MR/CT compatible phantom” was established: Relaxation times equivalent to human tissue, dielectric properties, homogeneous relaxation times, sufficient strength to fabricate a torso, ease of handling, a wide variety of density material for calibration, chemical and physical stability over an extended time. For this requirements, chemical component in each tested plug which would be tissue equivalent to human tissue on MR and CT image and production of phantom body and plug was performed. Chemical component has described below: Agaros, GdCl{sub 3}, NaN{sub 3}, NaCl, K{sub 2}Co{sub 3}, deionized-distilled water. Various mixture of chemical component to simulate human tissue on both MR and CT image was tested by measuring T1, T2 relaxation time and signal intensity (SI) on MR image and Hounsfield unit (HU) on CT and each value was compared. The hybrid MR/CT compatible phantom with 14 plugs was designed and has made. Total height and external diameter was decided by internal size of 32 channel MR head-coil. Results: Tissue-equivalent chemical component materials and hybrid MR/CT compatible phantom was developed. The range of T1, T2 relaxation time and SI on MR image, HU on CT was acquired and could be adjusted to correspond to simulated human tissue. Conclusion: Current result shows its possibility for MR-only based radiotherapy and the best mixing rate of chemical component for tissue-equivalent image on MR and CT was founded. However, additional technical issues remain to be overcome. Conversion of SI on MR image into HU and dose calculation based on converted MRI will be progressing.

60 APPLIED LIFE SCIENCES↗

Sun Grant/DOE Regional Feedstock Partnership: Final Technical Report

The U.S. Department of Energy (DOE) and the Sun Grant Initiative initiated the Regional Feedstock Partnership (referred to as the Partnership) in 2007 primarily to address information gaps associated with the likelihood for realization of the sustainable and reliable production of a billion-tons of biomass annually to support the U.S. bioenergy industry by the year 2030. Publication of The Technical Feasibility of a Billion-Ton Annual Supply (Perlack et al., 2005) in 2005, with its associated yield assumptions, led to the realization that the yield goals and assumptions utilized in that analysis required careful validation. To achieve the overall goal of validating key yield assumptions, the following objectives were developed: 1. Establishment of replicated field trials across regions to determine the impact of crop residue removal (primarily corn and small grains) on future grain yields and soil health. 2. Establishment of replicated field trials of some of the most promising dedicated energy crops (herbaceous annuals and perennials, as well as woody perennials) to demonstrate the potential performance of these feedstocks across the U.S. 3. Assessment of feedstock resources to be used to estimate a sustainable national supply potential. Teams composed of representatives from Land Grant Universities, USDA ARS, DOE National Laboratories, industry, and other federal agencies were identified and assembled to address each of these objectives. For Objective 1, members of the USDA ARS’ Resilient Economic Agricultural Practices (REAP) team combined with university personnel to leverage on-going work and established new trials to determine sustainable corn residue removal rates. In addition, universities across the continental U.S. conducted surveys of published past research to define parameters for the use of cereal grain residue (primarily wheat) as a biomass feedstock. For Objective 2, and based on input from DOE, USDA, Land Grant university scientists, and others, several herbaceous and woody energy crop species were selected for new or further evaluation across wide geographic areas as cellulosic feedstock sources. Species teams were organized to assess the yield potential of candidate herbaceous feedstocks including sorghum, energycane, Miscanthus x giganteus (hereafter referred to as miscanthus), switchgrass, and mixed perennial species (primarily grasses and some legumes) on Conservation Reserve Program (CRP) land. Woody species will be critical components of the bioenergy sector; therefore, species teams were also organized for shrub willow and hybrid poplar (Populus spp.). Field trials of each species were utilized to determine yield potential across the U.S. For Objective 3, a GIS resource team was organized with representatives from each of the five Sun Grant regions. While some regional assessments were made, the multi-institutional team decided that the group from Oregon State University would utilize their PRISM ELM model to estimate national yield potential of the various species evaluated. The following are key outcomes and impacts • The Partnership demonstrated the production potential of diverse herbaceous and woody feedstocks across much of the U.S. for 5-7 consecutive growing seasons. Long-term studies such as this are not commonly possible due to limitations in funding cycles. • Long-term field trials were valuable in demonstrating the importance of agronomic management practices and genetic resources to yield of sorghum, switchgrass, miscanthus, energycane, CRP mixed perennial grasses, poplar, and willow. • National yield potential maps were developed for all species evaluated in the Partnership. • Sustainable corn stover removal rates were quantified for use by producers, harvesters, and commercial lignocellulosic biorefineries. • Data from the Partnership field trials not only validated initial Billion Ton estimates, but were instrumental in developing both the Billion Ton Update in 2011, and especially the 2016 Billion Ton Report. • The Partnership provided the opportunity to assemble and conserve a poplar germplasm collection that contains more than 20,000 clones for use in breeding programs. New clones resulting from crosses made using this germplasm collection have resulted in significantly improved cultivars that could be scaled up and deployed. • Further validation of improved yields of new varieties/cultivars of biomass sorghum, energycane, hybrid poplars, and shrub willows was produced by the Partnership. • The Partnership demonstrated the potential of energycane in northern parts of the southeastern U.S., particularly in relation to sugarcane varieties. • For certain feedstocks (e.g., CRP mixed grasses, switchgrass, willow, and poplar), production economics were ascertained through Partnership field trials. • Biomass samples collected as part of the Partnership are also being used to populate Idaho National Laboratory’s Bioenergy Feedstock Library. • Because of the size and scope of the Partnership, workforce development was a key component and outcome. Numerous undergraduate students (25), graduate students (15 MS and 8 PhD), and postdoctoral researchers (7) were trained by Partnership participants. This will help to prepare individuals for careers in the emerging fields of plant breeding, biomass production, feedstock supply logistics, and biomass conversion processes. • More than 130 scientific publications have been authored by Partnership team members. Numerous other presentations, outreach publications, book chapters, and websites have also been developed to further the continued development of the bioeconomy.

09 BIOMASS FUELS↗

An integrated integral projection model ( IPM 2 ) to disentangle size‐structured harvest and natural mortality

Abstract Body size is one of the most important traits governing individual‐level demographic rates and modulating population‐level processes. Multiple size‐dependent demographic rates can simultaneously change population structure, so distinguishing their individual contributions to overall population dynamics remains a challenge. Disentangling size‐dependent harvest rates from other demographic rates is critical for assessing the impact of removal on populations of invasive species. Inference about invasive populations can be difficult, however, as observations are often collected opportunistically as part of removal programs, rather than experimentally designed. Yet accurate inference is essential for understanding the feasibility of population suppression and optimising management decisions. We develop an integrated integral projection model (IPM 2 ) that leverages the strengths of the integrated population model and integral projection model to enable inference about complex, size‐structured demographic rates from imperfect observations. We apply the IPM 2 in the context of invasive European green crab ( Carcinus maenas ), a species for which individual body size strongly regulates both the observation‐generating process and latent, population dynamics. The IPM 2 facilitates the distinct estimation of green crab size‐structured harvest and natural mortality rates, parameters for which no explicit data is collected and that are unidentifiable in component datasets of the integrated population model. The model represents how the green crab population changes over time, providing the first estimates of size‐structured abundance of this high‐priority species. By forecasting the stable size distribution and equilibrium population size under varying removal efforts, we demonstrate that extremely high levels of removal effort can reduce the equilibrium green crab population size. Yet these high mortality rates also shift the stable size distribution and increase the equilibrium abundance of smaller crabs, since size‐selective removal alters intraspecific interactions. The ecological outcome of this shift in size structure will be variable, as green crab size modulates only some of its interactions with other species. These results highlight the value of the IPM 2 framework for inferring complex population dynamics with information needs that outpace information in individual observational datasets, providing a path forward for accurate assessment of conservation programs.

Keller, Abigail G. [Department of Environment Scie↗

Development of a 5-Component Balance for Water Tunnel Applications

The principal objective of this research/development effort was to develop a multi-component strain gage balance to measure both static and dynamic forces and moments on models tested in flow visualization water tunnels. A balance was designed that allows measuring normal and side forces, and pitching, yawing and rolling moments (no axial force). The balance mounts internally in the model and is used in a manner typical of wind tunnel balances. The key differences between a water tunnel balance and a wind tunnel balance are the requirement for very high sensitivity since the loads are very low (typical normal force is 90 grams or 0.2 lbs), the need for water proofing the gage elements, and the small size required to fit into typical water tunnel models. The five-component balance was calibrated and demonstrated linearity in the responses of the primary components to applied loads, very low interactions between the sections and no hysteresis. Static experiments were conducted in the Eidetics water tunnel with delta wings and F/A-18 models. The data were compared to forces and moments from wind tunnel tests of the same or similar configurations. The comparison showed very good agreement, providing confidence that loads can be measured accurately in the water tunnel with a relatively simple multi-component internal balance. The success of the static experiments encouraged the use of the balance for dynamic experiments. Among the advantages of conducting dynamic tests in a water tunnel are less demanding motion and data acquisition rates than in a wind tunnel test (because of the low-speed flow) and the capability of performing flow visualization and force/moment (F/M) measurements simultaneously with relative simplicity. This capability of simultaneous flow visualization and for F/M measurements proved extremely useful to explain the results obtained during these dynamic tests. In general, the development of this balance should encourage the use of water tunnels for a wider range of quantitative and qualitative experiments, especially during the preliminary phase of aircraft design.

Suarez, Carlos J.↗

Investigation of Lubricant Additive Interactions on Gasoline Particulate Filters

To understand how the composition of novel lubricant additives and their ash interact with gasoline particulate filters (GPFs), an accelerated aging protocol was conducted using three lubricant additive formulations and two GPF types. The additive packages (adpaks) consisted of Ca+Mg detergent in a 3:1 or 0:1 ratio and an anti-wear component—either zinc dialkyl dithiophosphate (ZDDP) or a novel phosphonium-phosphinate ionic liquid (IL) substitute. The particulate sampling captured amount/compositions of particulate matter (PM) generated, total particulate number, and size distribution. Five ash loadings were completed. GPF position and adpak composition affected the backpressure, ash composition, ash morphology, and captured mass. The particulate sampling indicated that the ash component consisted primarily of particles less than 50 nm in size and that the Mg-only adpak resulted in more particulate of 50–400 nm in size. Postmortem materials characterization indicated GPFs in the underfloor position had deeper penetration of ash into the walls compared to the close-coupled position. Additionally, the Mg-only adpak had a higher filter collection efficiency (>90%) and the ash particles consisted of a higher concentration of dense ash material. In contrast, four of the 3:1 Ca:Mg lubricant adpaks resulted in a collection efficiency of only 40–50%. Although the collection efficiency was higher with the Mg-only adpak, the ash layer in the GPF was not thicker, nor was the penetration into the wall more significant, and surprisingly the full useful life (FUL) backpressure was lower than with Ca:Mg adpaks. The higher density of the Mg-derived ash was the only detectable difference. A possible explanation of this observation is that Mg ash has a lower melting point and is more susceptible to densification during combustion or GPF regeneration. The substitution of IL in place of the ZDDP did not lead to any notable changes in collection efficiency or location of the ash.

42 ENGINEERING↗

Robotic Scaffolds for Tissue Engineering and Organ Growth

The aim of tissue engineering (TE) is to restore tissue and organ functions with minimal host rejection. TE is seen as a future solution to solve the crisis of donor organs for transplant, which faces a shortage expected only to increase in the future. In this innovation, a flexible and configurable scaffold has been conceived that mechanically stresses cells that are seeded on it, stimulating them to increased growth. The influence of mechanical stress/ loading on cell growth has been observed on all forms of cells. For example, for cartilages, studies in animals, tissue explants, and engineered tissue scaffolds have all shown that cartilage cells (chondrocytes) modify their extracellular matrix in response to loading. The chondrocyte EMC production response to dynamics of the physical environment (in vivo cartilage development) illustrates a clear benefit (better growth) when stressed. It has been shown that static and dynamic compression regulates PRG4 biosynthesis by cartilage explants. Mechanical tissue stimulation is beneficial and (flexible) scaffolds with movable components, which are able to induce mechanical stimulation, offer advantages over the fixed, rigid scaffold design. In addition to improved cell growth from physical/mechanical stimulation, additional benefits include the ability to increase in size while preserving shape, or changing shape. By making scaffolds flexible, allowing relative movement between their components, adding sensing (e.g., for detecting response of cells to drug release and to mechanical actions), building controls for drug release and movement, and building even simple algorithms for mapping sensing to action, these structures can actually be made into biocompatible and biodegradable robots. Treating them as robots is a perspective shift that may offer advantages in the design and exploitation of these structures of the future.

Stoica, Adrian↗

Multiple Components in the Broadband γ -Ray Emission of the Short GRB 160709A

GRB 160709A is one of the few bright short gamma-ray bursts detected by both the Gamma-ray Burst Monitor and the Large Area Telescope on board the Fermi Gamma-ray Space Telescope. The γ-ray prompt emission of GRB 160709A is adequately fitted by combinations of three distinct components: (i) a nonthermal component described by a power law (PL) with a high-energy exponential cutoff, (ii) a thermal component modeled with a Planck function, and (iii) a second nonthermal component shaped by an additional PL crossing the whole γ-ray spectrum. While the thermal component dominates during ~0.12 s of the main emission episode of GRB 160709A with an unusually high temperature of ~340 keV, the nonthermal components dominate in the early and late time. The thermal component is consistent with the photospheric emission resulting in the following parameters: the size of the central engine, ${R}_{0}={3.8}_{-1.8}^{+5.9}$ × 10 8 cm, the size of the photosphere, ${R}_{\mathrm{ph}}={7.4}_{-1.2}^{+0.8}$ × 10 10 cm, and a bulk Lorentz factor, ${\rm{\Gamma }}={728}_{-93}^{+75}$, assuming a redshift of 1. The slope of the additional PL spectrum stays unchanged throughout the burst duration; however, its flux decreases continuously as a function of time. A standard external shock model has been tested for the additional PL component using the relation between the temporal and spectral indices (the closure relation). Each set of spectral and temporal indices from two energy bands (200 keV–40 MeV and 100 MeV–10 GeV) satisfies a distinct closure relation. From the closure relation test we derived the index for the electron spectral distribution, p = 2.5 ± 0.1. The interaction of the jet with the interstellar environment is preferred over the interaction with the wind medium.

79 ASTRONOMY AND ASTROPHYSICS↗

Guide to Nondestructive Evaluation Techniques

Nondestructive evaluation (NDE), alternately known as nondestructive examination (NDE), (commonly used within the nuclear industry), nondestructive testing (NDT) (commonly used in the aerospace and petrochemical industry), and nondestructive inspection (NDI) (commonly used within the military), are as the name implies test and assessment technologies designed to detect and characterize components without damaging or compromising the component’s ability to perform its design function. The most common application is detection of flaws caused either by manufacturing anomalies, service or environmental stresses, or natural material aging. More generally, applications may include estimation of mechanical and material properties, stress/strain, and dynamic response behavior. Post-manufacturing inspections frequently enjoy unfettered access to the component or part that may allow more thorough examinations, while in-service examinations after components have been in use may impose severe access limitations for in-situ testing. If flaws are detected, they must then be evaluated relative to their size, location, growth rate, growth mechanism, and likelihood that they are or will become a liability to the component’s function or performance. NDE is comprised of a large family of specific test disciplines including visual inspection, dimensional metrology, ultrasound, radiography, penetrant test, magnetic particle test, leak test, eddy current tests, potential drop tests, flash and vibro thermography, shearography, acoustic emissions, and many other methods. This section provides discussion on general NDE science and considerations for specific technique selection.

nondestructive, examination, inspection, NDE, NDT↗

Droplet activation, separation, and compositional analysis: Laboratory studies and atmospheric measurements

Droplets produced in a cloud condensation nucleus chamber as a function of supersaturation have been separated from unactivated aerosol particles using counterflow virtual impaction. Residual material after droplets were evaporated was chemically analyzed with an Aerodyne Aerosol Mass Spectrometer and the Particle Analysis by Laser Mass Spectrometry instrument. Experiments were initially conducted to verify activation conditions for monodisperse ammonium sulfate particles and to determine the resulting droplet size distribution as a function of supersaturation. Based on the observed droplet size, the counterflow virtual impactor cut-size was set to differentiate droplets from unactivated interstitial particles. Validation experiments were then performed to verify that only droplets with sufficient size passed through the counterflow virtual impactor for subsequent analysis. A two-component external mixture of monodisperse particles was also exposed to a supersaturation which would activate one of the types (ammonium sulfate) but not the other (polystyrene latex spheres). The mass spectrum observed after separation indicated only the former, validating separation of droplets from unactivated particles. Results from atmospheric measurements using this technique indicate that aerosol particles often activate predominantly as a function of particle size. Chemical composition is not irrelevant, however, and we observed enhancement of sulfate in droplet residuals using single particle analysis.

54 ENVIRONMENTAL SCIENCES↗

Application of Linear Additive Conditions for Near-Infrared Diffuse Reflectance Absorption Spectroscopy

Determining the homogeneity of material mixing in real time during product processing is critical for quality control. According to the Kubelka–Munk (K-M) function of diffuse reflectance absorption spectrum, absorbance (A) is approximately linear with the content of the components when the sample scattering coefficient (S) is in a certain range. The S is determined by the particle size of powder samples. Therefore, this study determined particle size ranges that satisfy linear additivity in near-infrared diffuse reflectance spectroscopy (NIRDRS). Thus, the proposed NIRDRS analysis technique can be used to determine the homogeneity of material mixes or analyze the percentages of the components in the mixture. In this study, vitamin B3 and vitamin C were used for preparing mixed samples with varying percentages. The experimental results revealed that linear additivity is satisfied when the powder particle size is in the range of less than 280, 280–450, and 450–900 μm. When the confidence level is 0.01, the actual mixed spectra are not significantly different from the “simulated mixed spectra” constructed by linear addition, with their relative deviations less than 1.08%. The absolute errors of the actual and analytic percentages were within 2.98% for each component in the mixtures. The above conclusions also hold for sorghum, which has a complex material composition. Statistical models cannot analyze the percentages of components in the mixture. In contrast, linear addition and direct calibration approach avoids the use of a large number of samples for statistical modeling and analyze the percentages of mixed samples. Meanwhile, it can be used to discriminate and analyze the material mixing uniformity by building a mechanistic model.

Feng, Zhiyue↗

Mechanical and Tribological Performance of Additively Manufactured Nanocrystalline Aluminum via Cryomilling and Cold Spray

In this study, nanocrystalline (NC) aluminum (Al) and magnesium (Mg)-doped Al bulk components were fabricated using a hybrid manufacturing process that combines cryomilling and high-pressure cold spray (HPCS) additive deposition techniques. Yttria-stabilized zirconia (YSZ) was also added during the HPCS process to improve deposition efficiency and build-up thickness via peening. The evolution of morphology, crystallite size, and elemental composition of both cryomilled powders and cold-sprayed (CS’ed) components was systematically characterized using X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). Mechanical characterization was performed using Vickers microhardness and uniaxial tensile testing, while the tribological behavior was assessed using sliding wear tests under dry/lubricated conditions. XRD analysis revealed that increased cryomilling duration led to significant crystallite refinement, which directly correlated with enhanced hardness and strength. This mechanical strengthening was accompanied by an increase in coefficient of friction (COF) and lower wear rates. The results also showed that the Mg-doped Al exhibited superior hardness, tensile strength, and tribological performance compared to pure Al. The study further explores the underlying mechanisms responsible for these enhancements, highlighting the potential of solute-assisted grain boundary stabilization in tailoring high-performance NC Al alloys.

36 MATERIALS SCIENCE↗

The Apollo 16 drive tube 60009/60010. II - Petrology and major element partitioning among the regolith components

The paper summarizes petrographic and electron microprobe data from 22 polished thin sections that represent the total length of double drive tube 60009/60010 and discusses a new application of the method of modal recombination to estimate bulk chemistry. The modal recombination approach can be used to reliably calculate the chemistry of the greater than 0.02-mm size fraction and, more significantly, to derive the total major element partitioning among the regolith components.

Vaniman, D. T.↗

Chemical Imaging of Atmospheric Particles

Airborne particles are very dynamic and highly reactive components of the Earth’s atmosphere. Their high surface area and water content provide a unique reaction environment for multiphase chemistry that continually modifies particle composition and properties that consequently impact air quality as well as concentrations of gas-phase species. By absorbing and scattering solar and terrestrial radiation, particles directly influence the planet’s radiative balance. Their indirect effects include modifying the nucleation, lifetime, and physical properties of clouds. Due to the sensitivity of the atmospheric environment to all these variables, fundamental studies of chemical transformations of atmospheric particles, their sources, continuously evolving composition, and physical properties are of highest research priority. Accurate descriptions of particles and their effects in the atmosphere require comprehensive information not only on the particle-type populations and their size distributions and concentrations, but also on the diversity and the spatial heterogeneity of chemical components within individual particles. Developments and applications of modern chemical imaging approaches for off-line characterization of atmospheric particles have been at the forefront of modern experimental studies and have resulted in a transformative impact in atmospheric chemistry and physics. This Account presents a synopsis of recent advances in chemical imaging of atmospheric particles collected on substrates during field and laboratory experiments. The unique advantage of chemical imaging methods is that they simultaneously provide two analytical measurements: imaging of particles to assess variability in their individual sizes and morphology, as well as particle specific speciation of their composition and spatial heterogeneity of different chemical components within individual particles. We also highlight analytical chemistry approaches that enable chemical imaging of particles with different levels of elemental and molecular specificity, including applications of multimodal methodologies where the same or similar groups of particles are probed by two or more complementary techniques. These approaches provide unique experimental insights on the nature and sources of particles, understanding their physical properties, atmospheric reactivity, and transformations. Chemical imaging data provide unique experimental input for atmospheric models that simulate aging and changes in particle-type populations, internal composition, and their associated optical and cloud forming properties. Here, we highlight applications of chemical imaging in selected recent studies, discuss their existing limitations, and forecast future research directions for this area.

54 ENVIRONMENTAL SCIENCES↗

High-temperature crystallization of nanocrystals into three-dimensional superlattices

Crystallization of colloidal nanocrystals into superlattices represents a practical bottom-up process with which to create ordered metamaterials with emergent functionalities. With precise control over the size, shape and composition of individual nanocrystals, various single-and multi-component nanocrystal superlattices have been produced, the lattice structures and chemical compositions of which can be accurately engineered. Nanocrystal superlattices are typically prepared by carefully controlling the assembly process through solvent evaporation or destabilization or through DNA-guided crystallization. Slow solvent evaporation or cooling of nanocrystal solutions (over hours or days) is the key element for successful crystallization processes. Here we report the rapid growth (seconds) of micrometre-sized, face-centred-cubic, three-dimensional nanocrystal superlattices during colloidal synthesis at high temperatures (more than 230 degrees Celsius). Using in situ small-angle X-ray scattering, we observe continuous growth of individual nanocrystals within the lattices, which results in simultaneous lattice expansion and fine nanocrystal size control due to the superlattice templates. Thermodynamic models demonstrate that balanced attractive and repulsive interparticle interactions dictated by the ligand coverage on nanocrystal surfaces and nanocrystal core size are responsible for the crystallization process. The interparticle interactions can also be controlled to form different superlattice structures, such as hexagonal close-packed lattices. In conclusion, the rational assembly of various nanocrystal systems into novel materials is thus facilitated for both fundamental research and for practical applications in the fields of magnetics, electronics and catalysis.

36 MATERIALS SCIENCE↗