Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computer Science - Operating Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Novel Deployment of Elpasolites as a Dual Neutron/Gamma-Ray Directional Detector

At a time when upholding national security has never been more important, there exists a need for the advancement of radiation detection technologies. Neutron and photon detectors are essential to fulfilling mission areas including detection and localization of missing, stolen or smuggled radiological or nuclear materials, quantification of the effects of a radiological or nuclear event, and supporting nonproliferation efforts. The aim of this study was to evaluate a new radiation detector based on the scintillation elpasolite compound Cs 2 LiYCl 6 :Ce (CLYC) for simultaneous measurements of neutron and photon flux and the localization of radiation sources. Previous studies performed on the CLYC scintillator indicate its potential for thermal neutron and gamma-ray measurements. This study is dedicated to the novel application of the CLYC as a dual neutron / photon detector and as part of a directional detection system. Both computational modeling and an experimental study were carried out within this research project. As part of the computational study, the response of a CLYC scintillator detector to gamma rays induced by thermal neutron interaction with Cl and 7 Li nuclei was investigated using the MCNP6 code. In addition, arrays of three and four CLYC detectors were modeled in order to evaluate the directional detection of both a thermal neutron source and a gamma-ray source. It was shown that little or no quality of source direction determination would be lost when three detectors were used in the array compared to four detectors. In the experimental study, the photon spectroscopy capabilities of the CLYC detectors were evaluated. A gamma-ray energy resolution of 4.9% was measured for the 662-keV peak of 137 Cs and 3.6% for the 1.33-MeV peak of 60 Co. Using a thermal neutron source, the pulse shape discrimination analysis was successfully performed for the CLYC detector signal waveforms. Thermal neutrons and gamma rays were separated with an exceptional figure of merit (FOM) of 2.3. An array of three CLYC detectors was assembled for the purpose of directional neutron / gamma-ray detection. The intrinsic peak efficiency of CLYC detectors was evaluated. The three-CLYC detector array was deployed for directional measurements with a single gamma-ray 137 Cs source, two gamma-ray sources of 137 Cs and 60 Co isotopes and a thermal neutron source designed using a 239PuBe neutron source supplied with a polyethylene moderator. Measurements were carried out using sources located in the longitude and latitude planes over the angles from 0° to 360°. The measured data were processed through a maximum likelihood estimation algorithm providing a possible direction for which the radioactive source in each case was positioned. The estimated directions were close if not exact matches for the actual directions to the radioactive source. The largest discrepancy in direction produced by the algorithm was approximately 11%. However, it was hypothesized that this percent error can be decreased by homogenizing the directional detection system to consist of scintillators of the same size and quality, identical photomultiplier tubes and identical aluminum housings. The feasibility of this hypothesis to decrease the percent error was confirmed by the zero percent error achieved in the directional measurements produced in the computational study utilizing a homogenous directional detection system. The results of computational and experimental studies completed within this research project provide means to propose the array of three CLYC scintillators as an efficient dual neutron / gamma-ray directional detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

How Artificial Intelligence and Machine Learning Transform the Human Condition

Our July 2021 symposium, “How Artificial Intelligence and Machine Learning Transform the Human Condition,” was hosted through a partnership between Los Alamos National Laboratory and the National Academies of Sciences, Engineering, and Medicine’s Committee on Science, Technology, and Law. The symposium is part of a broader initiative focusing on harnessing transformative technologies, and builds on our September 2020 symposium titled, “COVID-19: Harnessing a Transformational Pandemic.” Topics such as systems biology and artificial intelligence not only represent compelling research frontiers but also highlight national security challenges with social, ethical, and legal implications.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

December 2022 NS&T Highlights

Highlights for the Nuclear Science and Technology organization for the month of December 2022.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

The Arctic

The Arctic environment in 2024 continued on a trajectory that has put it in a state far different from that of the twentieth century. Ongoing accumulation of greenhouse gases in the atmosphere continues to quickly warm the Arctic, resulting in rapid changes in the cryosphere that are driving cascading impacts to climate, ecological, and societal systems. Many weather- and climate-related impacts in the Arctic are the result of compounding change, such as increased riverbank erosion, which is proximately due to increased river discharge from higher seasonal precipitation, yet is also exacerbated by thawing permafrost. However, even individual storms occur within very different ocean and ice conditions than were typically present in the late twentieth century. As a result, the impacts, including high winds, excessive precipitation, and coastal inundation, may be quite different nowadays, as exemplified by the October 2024 storm in northwest Alaska that produced severe coastal flooding in several communities. To share some of these impacts with a wider audience, select extreme weather impacts around the greater Arctic have been highlighted through the inclusion of sidebars in recent State of the Climate Arctic chapters (e.g., Benestad et al. 2023; Thoman et al. 2024).

Thoman, Richard L. [Univ. of Alaska, Fairbanks, AK↗
DOE OSTI2023

2022 American Conference on Neutron Scattering (ACNS 2022)

The 11th American Conference on Neutron Scattering (ACNS 2022) will be held on June 5-9, 2022, in Boulder, CO. The Conference will provide essential information on the breadth and depth of current neutron-related research worldwide. Hosted by the Neutron Scattering Society of America, this year’s Conference will feature a combination of invited and contributed talks, poster sessions, and tutorials. Topics of the conference are: Advances in Neutron Facilities, Instrumentation and Software: Developments in sources, instrumentation, sample environments and control software. Hard Condensed Matter: Magnetism, correlated metals, quantum/topological materials, superconductors, ferroelectrics, multiferroics, glasses, and disorder phenomena. Submissions outlining examples of neutron scattering in industrial and engineering applications involving hard condensed matter systems are also encouraged. Soft Matter: Neutron studies of soft materials and related fields including in situ and in operando studies. Polymers, surfactants, emulsions, gels, nanoparticles, colloidal suspensions and more. Submissions of computational studies or applications of machine learning beneficial to neutron scattering experiments, as well as examples of neutron scattering in industrial and engineering applications are strongly encouraged. Biology, Biophysics and Biotechnology: Neutron studies of biological and biologically relevant systems. Proteins, bio membranes, biological assemblies, natural materials, nucleic acids, drug-delivery platforms and biomedical systems. Submissions of computational studies or applications of machine learning beneficial to biological neutron scattering experiments, as well as examples of neutron scattering in applied research involving biological systems, are strongly encouraged. Materials Chemistry and Energy: Neutron-based studies of functional materials and materials for energy applications. Examples include porous materials such as metal organic frameworks (MOFs), zeolites; phosphors; novel pigments; electrolytes; catalysts; ionic conductors/cathode materials; photovoltaic materials (hybrid perovskites); thermoelectrics; magnetocalorics/electrocalorics. Structural Materials and Engineering: Neutron scattering studies of materials and engineering processes including structural materials, concrete and metals, as well as engineering processes including combustion, corrosion, additive manufacturing, and others. Neutron Physics: Fundamental physical studies of the neutron and related areas. Emerging Applications in Neutron Scattering: Machine Learning and Data Science: Advances in computing power have contributed to rapidly evolving machine learning and data science fields that can be leveraged to the benefit of the neutron scattering community. The purpose of this session is to highlight recent advances in machine learning and data science and to serve as the foundation of a parallel data and computation track highlighting computation advances and applications in neutron scattering throughout the conference.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hybridizing Machine Learning and Physically-based Earth System Models to Improve Prediction of Multivariate Extreme Events (AI Exploration of Wildland Fire Prediction)

Focal Areas: This project responds to two focal areas identified in the DOE Call for AI4ESP White Papers: 1) Predictive modeling through the use of artificial intelligence (AI) techniques, and 2) insights gleaned from complex data using explainable AI and big data analytics. Science Challenge: Large wildland fires (hereafter wildfires) appearing as high-impact compound climate extreme events are closely related to hydroclimate and water cycle extremes that modulate surface fuel supply and combustibility. These compound events have multivariate climatic features (e.g., temperature, precipitation, relative humidity, wind, lightning) and societal drivers (e.g., forest management, land use change, human caused ignitions). Meanwhile, they induce strong feedbacks to the coupled atmosphere, biosphere, and hydrosphere by perturbing regional and global radiation budget as well as ecological, biogeochemical, and water cycles across multiple spatiotemporal scales. The nonlinear interactions between these natural and anthropogenic components of the Earth system are too complex to be completely and adequately represented in today’s Earth system models (ESMs). The inherent stochastic nature of fire activity at all scales further increases the difficulty of its prediction using ESMs that are usually developed from deterministic equations and parameterizations. Besides, concurrence of long-term (decadal to interdecadal) global climate change and fire regime shifts overlapping with short-term (intraseasonal to interannual) variations of regional fire weather and burning activity confound predictability of these compound extreme events. We propose to address the above scientific challenges by using machine learning (ML)-based data-driven modeling techniques to integrate observations and physically-based ESMs’ simulations in a computationally efficient hybrid prediction system. This prediction system is supposed to characterize the wildfire’s sensitivity to climate and exogenous drivers at high resolution (~ 0.25°) on subseasonal to seasonal (S2S) timescales providing improved predictability and explainability. We will use the system to help identify: (1) What are the computational elements of a hybrid system needed to predict compound climate extreme events such as global wildfires? (2) What are the key drivers (either natural or anthropogenic) that modulate short-term variations of multivariate fire weather and burning activity over different regions? How can one take advantage of those driver-response relationships to improve the predictability of large wildfires on S2S time scales? (3) What are the underlying physical mechanisms and sources of improved predictability? Which ML techniques are optimal in revealing and adapting these mechanisms?

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Stress Birth and Death: Disruptive Computational Mechanics and Novel Diagnostics for Fluid-to-Solid Transitions

Many materials of interest to Sandia transition from fluid to solid or have regions of both phases coexisting simultaneously. Currently there are, unfortunately, no material models that can accurately predict this material response. This is relevant to applications that "birth stress" related to geoscience, nuclear safety, manufacturing, energy production and bioscience. Accurately capturing solidification and residual stress enables fully predictive simulations of the evolving front shape or final product. Accurately resolving flow of proppants or blood could reduce environmental impact or lead to better treatments for heart attacks, thrombosis, or aneurism. We will address a science question in this proposal: When does residual stress develop during the critical transition from liquid to solid and how does it affect material deformation? Our hypothesis is that these early phases of stress development are critical to predictive simulation of material performance, net shape, and aging. In this project, we use advanced constitutive models with yield stress to represent both fluid and solid behavior simultaneously. The report provides an abbreviated description of the results from our LDRD "Stress Birth and Death: Disruptive Computational Mechanics and Novel Diagnostics for Fluid-to-Solid Transitions," since we have written four papers that document the work in detail and which we reference. We give highlights of the work and describe the gravitationally driven flow visualization experiment on a model yield stress fluid, Carbopol, at various concentrations and flow rates. We were able to collapse the data on a single master curve by showing it was self-similar. We also describe the Carbopol rheology and the constitutive equations of interest including the Bingham-Carreau-Yasuda model, the Saramito model, and the HB-Saramito model including parameter estimation for the shear and oscillatory rheology. We present several computational models including the 3D moving mesh simulations of both the Saramito models and Bingham-Carreau-Yasuda (BCY) model. We also show results from the BCY model using a 3D level set method and two different ways of handling reduced order Hele-Shaw modeling for generalized Newtonian fluids. We present some first ever two-dimensional results for the modified Jeffries Kamani-Donley-Rogers constitutive equation developed during this project. We include some recent results with a successful Saramito-level set coupling that allows us to tackle problems with complex geometries like mold filling in a thin gap with an obstacle, without the need for remeshing or remapping. We report on some experiments for curing systems where fluorescent particles are used to track material flow. These experiments were carried out in an oven on Sylgard 184 as a model polymerizing system. We conclude the report with a summary of accomplishments and some thoughts on follow-on work.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantum simulations of nuclear resonances with variational methods

Background: The many-body nature of nuclear physics problems poses significant computational challenges. These challenges become even more pronounced when studying the resonance states of nuclear systems, which are governed by the non-Hermitian Hamiltonian. Quantum computing, particularly for quantum many-body systems, offers a promising alternative, especially within the constraints of current noisy intermediate-scale quantum (NISQ) devices. Purpose: This work aims to simulate nuclear resonances using quantum algorithms by developing a variational framework compatible with non-Hermitian Hamiltonians and implementing it fully on a quantum simulator. Methods: We employ the complex scaling technique to extract resonance positions classically and adapt it for quantum simulations using a two-step algorithm. First, we transform the non-Hermitian Hamiltonian into a Hermitian form by using the energy variance as a cost function within a variational framework. Second, we perform 𝜃-trajectory calculations to determine optimal resonance positions in the complex energy plane. To address resource constraints on NISQ devices, we utilize Gray code (GC) encoding to reduce qubit requirements. Results: We first validate our approach using a schematic potential model that mimics a nuclear potential, successfully reproducing known resonance energies with high fidelity. We then extend the method to a more realistic 𝛼−𝛼 nuclear potential and compute the 𝐷- and 𝐺-wave resonance energies with a basis size of 𝑁=16, using only four qubits. The quantum simulation results closely match the classical values, demonstrating the feasibility of our approach. Conclusions: This study demonstrates, for the first time, that the complete 𝜃-trajectory method can be implemented on a quantum computer without relying on any classical input beyond the Hamiltonian. The results establish a scalable and efficient quantum framework for simulating resonance phenomena in nuclear systems. This work represents a significant step toward quantum simulations of open quantum systems and lays the foundation for future investigations into resonance structures in nuclear, atomic, and molecular physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Metabolic flux measurement, imaging and microscopy

Provided herein are methods for measuring molecular flux rates of molecules of interest in a tissue sample in spatially-organized manner and generating output (e.g., an image, a heat map, a contour map, a table or a database) representing the molecular flux rates of each spatially-defined location of the sample. Provided herein are also the output, as well as systems and computer-readable medium with computer-executable instructions for determining molecular flux rates of molecules of interest in the sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dendritic Computing with Multigate Ferroelectric Field-Effect Transistors

Although inspired by neuronal systems in the brain, artificial neural networks generally employ point-neurons, which offer computational complexity far less than that of their biological counterparts. Neurons have dendritic arbors that connect to different sets of synapses and offer local nonlinear accumulation – playing a pivotal role in processing and learning. Inspired by this, we propose a novel neuron design based on a multigate ferroelectric field-effect transistor that mimics dendrites. It leverages ferroelectric nonlinearity for local computations within dendritic branches while utilizing the transistor action to generate the neuronal output. The branched architecture enables smaller crossbar arrays in hardware integration, improving efficiency. Using an experimentally calibrated device-circuit-algorithm cosimulation framework, we demonstrate that networks incorporating our dendritic neurons achieve superior performance compared to much larger networks without dendrites (∼ 17× fewer trainable weight parameters). These findings suggest that dendritic hardware can significantly improve computational efficiency and learning capacity of neuromorphic systems optimized for edge applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Space-Time Quantum Information from the Entangled States of Magnetic Molecule (STI Product)

This collaborative project combines synthesis, measurement, and theory by three faculty members at the Eddleman Quantum Institute of UC Irvine to effectively investigate the quantum properties of molecules in the space, time, and frequency domains. Through synthetic chemistry, molecules are tailored for their magnetic and coherent properties. By combining femtosecond (fs) terahertz (THz) light and a continuous wave (cw) THz laser with a low temperature scanning tunneling microscope (STM), quantum phenomena are probed with simultaneous femtosecond temporal and atomic-scale spatial resolution. In particular, the invention of the quantum superposition microscope (QSM) advances quantum sensing for enhanced spectroscopy and imaging capabilities. Coupling theory to the experimental efforts offers a deeper understanding and predictive power for the molecular systems. The phenomena of superposition, entanglement, and coherence is central to quantum information science and can be realized in qubit states. Many systems can be modeled by a double-well potential in which two levels are formed in the two lowest energy states interacting with the environment and external radiation. In focusing on molecules as two-level systems, the underlying expectation is that their tunable composition and structure allows an effective parameter space to optimize their use as qubits for quantum sensing and computing. The THz radiation induces the superposition between the two states, appearing as temporal oscillations that damp in amplitude. Enhanced spectroscopy and imaging in the time and frequency domains is achieved through the extreme sensitivity of the frequency and damping of coherence of two-level systems to its environment. A single hydrogen molecule trapped in the STM tunneling gap experiences a double-well potential and absorption of THz femtosecond pulses of light creates the superposition of its two levels, appearing as damped oscillations in the light induced direct current (DC). The oscillation frequency depends sensitively on the electric field distribution of the copper nitride (Cu 2 N) surface, through the Stark effect, and associated with the different charge distributions at the copper and nitrogen sites and in between. This QSM can resolve variation in the surface electric field with 0.02 nanometer resolution. In addition, the single hydrogen molecule entaes with nearby hydrogen molecules as seen in the avoided level crossings of energy (oscillation frequency) versus the voltage across the tunneling gap. Thus, the first application of the QSM senses and images the surface electric field at the atomic scale. Results from this project advance fundamental understanding of quantum phenomena, develop novel synthesis, measurement, and theory, provide the knowledge foundation for molecule-based qubits and sensing that enable the development of the QSM and emergent technologies. This project trained researchers in quantum information science, extended knowledge in classrooms, and outreached to the community.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Measurement of Zero-Frequency Fluctuations Generated by Coupling between Alfvén Modes in the JET Tokamak

We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with theoretical and numerical predictions of zonal modes pumped by Alfvén modes, and is correlated with an increase in the deep core ion temperature, temperature gradient, confinement factor H 89,P , and a reduction in the main ion heat diffusivity. Despite the energetic particle transport induced by the Alfvén eigenmodes, the generation of a zero-frequency fluctuation that can suppress the turbulence leads to an overall improvement of confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

EXAGRAPH: Graph and combinatorial methods for enabling exascale applications

Combinatorial algorithms in general and graph algorithms in particular play a critical enabling role in numerous scientific applications. However, the irregular memory access nature of these algorithms makes them one of the hardest algorithmic kernels to implement on parallel systems. With tens of billions of hardware threads and deep memory hierarchies, the exascale computing systems in particular pose extreme challenges in scaling graph algorithms. The codesign center on combinatorial algorithms, ExaGraph, was established to design and develop methods and techniques for efficient implementation of key combinatorial (graph) algorithms chosen from a diverse set of exascale applications. Algebraic and combinatorial methods have a complementary role in the advancement of computational science and engineering, including playing an enabling role on each other. In this paper, we survey the algorithmic and software development activities performed under the auspices of ExaGraph from both a combinatorial and an algebraic perspective. In particular, we detail our recent efforts in porting the algorithms to manycore accelerator (GPU) architectures. We also provide a brief survey of the applications that have benefited from the scalable implementations of different combinatorial algorithms to enable scientific discovery at scale. We believe that several applications will benefit from the algorithmic and software tools developed by the ExaGraph team.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

High-Order Preconditioners for Modern Computing Architectures: Line-Based Discontinuous Galerkin Method on GPUs

The goals of our project are to be able to overcome issues that plague computing in modern architecture such as limited memory bandwidth, badly conditioned Jacobians, and restrictive time steps. We begin by describing the line-based discontinuous Galerkin (line DG) method for a scalar two-dimensional problem. Line DG has been shown to provide a significant increase in sparsity for Jacobian matrix, especially in the diagonal block elements. In addition to this, the implicit time integration scheme helps alleviate the time step restriction but requires solving a (potentially badly conditioned) linear system. We can precondition the linear system to facilitate the solution. Since we want to solve the system on the GPU, the increase in sparsity from the line DG method is helpful to alleviate the memory issue. We successfully implemented a computation of the Jacobian on the CPU and are currently working on the GPU implementation. Finally, I discuss how this opportunity to intern at Lawrence Livermore National Laboratory through the National Science Foundation Mathematical Sciences Graduate Internship has affected my personal and professional growth.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Open Reproducible Electron Microscopy Data Analysis

Electron microscopy (EM) is a cornerstone technique in the materials and biological sciences capable of imaging structures at nano- to atomic-scale resolution. Advances in technologies mean that one acquires datasets at increasing data rates and sizes. These advancements present enormous opportunities for researchers to understand complex systems. However, processing the resulting large-scale, complex data in a reproducible and shareable way is a real challenge for researchers. The building, managing, and maintaining complex workflows in a reproducible manner requires extensive knowledge in several areas outside the researchers’ core skill sets, such as software engineering, data science, and high-performance computing (HPC). Our work demonstrates an innovative approach to solving these problems, enabling reproducible EM data analysis through container encapsulated pipelines. Using modern container technologies, we encapsulate processing elements and connect them using shared memory. We expose user-friendly, advanced algorithms and tools to allow end users to utilize without expert programming skills. The platform enables reproducible, scalable, shareable pipelines for the analysis and visualization of EM data. Focusing on interoperability, we leverage the DOE and other agencies’ existing investments to provide a powerful software platform for EM data analysis.

Harris, Christopher↗
DOE OSTI2023

County-Level Hourly Renewable Capacity Factor Dataset for the ReEDS Model

This dataset contains hourly capacity factors for each renewable resource class and region (in this case, county). Technologies like large-scale utility PV (UPV), onshore wind, offshore wind, and concentrating solar power (CSP) are included. The dataset contains 7 years of hourly weather data (2007-2013) for different sites across the US and is used as one of the inputs to the ReEDS-2.0 model (see the "ReEDS 2.0 GitHub Repository" resource link below), developed by NREL. The weather profiles apply to any capacity that exists or is built in each region and class. This helps calculate the generation that can be provided using these resources. Open, reference, and limited are 3 scenarios based on land-use allowance, derived from the Renewable Energy Potential (reV) model developed by NREL, which helps generate supply curves for renewable technologies and assess the maximum potential of renewable resources in a designated area. Each zipped file in this dataset corresponds to a technology and contains the respective land-use scenario files required to run that technology in ReEDS. To use this dataset, download and place the extracted files in the locally cloned ReEDS repository inside one of the folders (inputs/variability/multi_year). After completing this copy, upon running the ReEDS model at the county-level spatial resolution for respective analysis purposes, the program will detect the presence of these files and will not fail.

Array↗
DOE OSTI2025

Advancements on Multi-Fidelity Random Fourier Neural Networks: Application to Hurricane Modeling for Wind Energy

Multi-fidelity approaches are emerging as effective strategies in computational science to handle otherwise intractable tasks like Uncertainty Quantification (UQ), training of Machine Learning (ML) models, and optimization, for expensive high-fidelity applications in which the amount of available simulations or data is limited. The main idea is simple: large datasets generated for low-fidelity approximations of the problem at hand are fused with a much sparser dataset for the target (high-fidelity) system. In this paper, we build on our recent success in designing random Fourier Neural Networks (rFNNs) [1] to target problems arising in wind energy applications and in particular problems of interest for hurricane modeling. In this context, data for the high-fidelity models are limited and lower fidelity alternatives are needed. In this work, we introduce a novel multi-fidelity training approach for our rFNNs and demonstrate its use on a simple verification problem and on a hurricane modeling problem in which high-fidelity data are generated via Large-Eddy Simulations (LES), while low-fidelity data are given by a mesoscale model. Initial results demonstrate how the multi-fidelity training approach can improve the quality of the resulting surrogate.

Fourier Neural Networks↗
DOE OSTI2020

CP2K: An Electronic Structure and Molecular Dynamics Software Package - Quickstep: Efficient and Accurate Electronic Structure Calculations

CP2K is an open source electronic structure and molecular dynamics software package to perform atomistic simulations of solid-state, liquid, molecular and biological systems. It is especially aimed at massively-parallel and linear-scaling electronic structure methods and state-of-the-art ab-initio molecular dynamics simulations. Excellent performance for electronic structure calculations is achieved using novel algorithms implemented for modern high-performance computing systems. This review revisits the main capabilities of CP2K to perform efficient and accurate electronic structure simulations. The emphasis is put on density functional theory and multiple post-Hartree-Fock methods using the Gaussian and plane wave approach and its augmented all-electron extension. TDK has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 716142). VRR has been supported by the Swiss National Science Foundation in the form of Ambizione grant No. PZ00P2 174227 and RZK by the Natural Sciences and Engineering Research Council of Canada (NSERC) through Discovery Grants (RGPIN-2016-0505). GKS and CJM are supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. UK based work was funded under the embedded CSE programme of the ARCHER UK National Supercomputing Service (http://www.archer.ac.uk), grants eCSE03-011, eCSE06-6, eCSE08-9, eCSE13-17 and the EPSRC (EP/P022235/1) grant “Surface and Interface Toolkit for the Materials Chemistry Community". Computational resources were provided by the Swiss National Supercomputing Centre (CSCS) and Compute Canada. The generous allocation of computing time on the FPGA-based supercomputer “Noctua" at PC2 is kindly acknowledged.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗