Search NASA⌕ Search

SEARCH · Search NASA

Results for “Design pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

A thin-walled composite beam model for light-weighted structures interacting with fluids

A thin-walled beam model is proposed for structures of variable cross-section, which can be either open or closed and includes multicellular cross-sections with either isotropic or orthotropic materials. The proposed model does not require any priori definition of cross-sectional warping which instead results from the solution of the problem. To achieve that a special deformation pattern is superimposed on the bending deformation described by Euler–Bernoulli beam theory. All sectional properties are automatically incorporated in the analysis as a result of the usual variational formulation of the system of equations. The proposed model is specifically designed to simulate the dynamics of wind/hydrokinetic turbine blade with low computational cost, especially in fluid–structure interaction (FSI) simulation. A number of test cases have been carried out to validate the proposed structural model which show good agreement between the results obtained her e and the solutions available in literature. Finally, FSI simulation of a hydrokinetic blade under field condition is carried out to illustrate the capability of the current thin-walled beam model in practice.

42 ENGINEERING↗

A combined management scheme to simultaneously mitigate As and Cd concentrations in rice cultivated in contaminated paddy soil

Paddy soils in southern China are heavily co-polluted by arsenic (As) and cadmium (Cd). The accumulation of these contaminants in rice grains may pose a high health risk. We evaluated the impact of adjusted water management practice (i.e., conventional irrigation and aerobic treatment after heading stage) and the application of two immobilization agents (i.e., CaO and Fe2O3) on the accumulation of As and Cd in rice grains of three rice varieties (i.e., Jinyou-463, Jinyou-268, and Mabayouzhan). The different schemes were tested via conducting a field experiment in paddy soil in Shaoguan, Guangdong Province, China. The results showed that the combined scheme (selecting Jinyou-268, aerobic water management after the heading stage, and 0.09% CaO and 0.5% Fe2O3 amendments) exhibited the best performance in the reduction of As and Cd accumulation in rice grains. This combined scheme decreased the grain As concentration by 26.19% and maintained the Cd at a low level (0.056 mg/kg) as compared to the use of local conventional irrigation patterns. Moreover, health risk assessment demonstrated that by applying the optimal scheme, neither As nor Cd content in rice had carcinogenic risk. However, the grain As remains at a high non-carcinogenic risk. We suggest that future field study design should fully incorporate the uncertainty of the natural environment to make the research conclusions more feasible for popularization and utilization. This study demonstrated an approach of utilizing the synergy effects of various measures for safe rice production in fields subjected to As and Cd contaminations.

Yang, Xiao↗

Comparison of Expert Vocabulary Usage Patterns Between Mental Health and Nonmental Health Clinicians When Diagnosing Pediatric Anxiety Disorders

Objective: To compare the utilization patterns of expert vocabulary (EVo) in diagnosing pediatric anxiety between mental health and non-mental health clinical notes from electronic health records to understand the role of Evo in informing classification and decision-making in anxiety diagnoses. Study design: We conducted a retrospective study using a cohort less than age 25 from Cincinnati Children's Hospital including 897 685 patients with 61 586 446 notes. We analyzed EVo, collected from mental health clinicians, in both mental and nonmental health notes. We compared classification accuracy using EVo-based patient-level embedding from all clinical notes, mental-health notes, and nonmental health notes for 2 tasks: 1) pre-vs postdiagnosis anxiety patients, and 2) prediagnosis anxiety vs nonanxiety patients. Results: EVo usage was highest in prediagnosis anxiety, lower in nonanxiety, and lowest in post-diagnosis. Classification models using EVo features from all, mental-health, and non-mental health notes showed similar F1 scores for prediagnosis anxiety (0.70 ± 0.2 for 2 categories). For anxiety vs nonanxiety classification, all clinical and nonmental health notes had better F1 scores than mental-health notes (above 0.90 for 3 categories). There was a notable difference in class-wise performance across both tasks. Conclusions: There are significant differences in anxiety EVo use between mental health and nonmental health clinicians. Despite less anxiety-specific terminology, non-mental health notes still captured key aspects of patient presentations, emphasizing the importance of including all clinicians' notes in analysis. EVo's utility for anxiety classification is most effective in prediagnostic phases, suggesting the need for a dedicated diagnostic lexicon and further study before incorporating EVo into classification models.

feature engineering↗

Experimental evidence of ion-induced instabilities in the NSLS-II storage ring

Fast ion instability has been identified as one of the most prominent instabilities in the recently constructed NSLS-II storage ring at Brookhaven National Laboratory. At a relatively low beam current (~ 25 mA) multi-bunch fills, ion-induced instabilities have already been observed during the early stages of machine commissioning. At present user operation with 250 mA in ~1000 bunches, the fast ion still remains the dominant instability, even after months of vacuum conditioning at high current. Ion-induced dipole motions of the electron beam have been suppressed using the transverse bunch-by-bunch (BxB) feedback system. However other adverse effects of this instability, such as the vertical beam size increase along the bunch train cannot be cured by the feedback system. Therefore, to achieve the NSLS-II design current of 500 mA while maintaining a small vertical beam emittance, it is important to further understand the fast ion instability and develop mitigation techniques. This paper reports on a series of ion-instability observations at various fill patterns and beam currents using start-of-art NSLS-II diagnostic tools.

43 PARTICLE ACCELERATORS↗

Field investigation of the quality of fresh and aged leachates from selected landfills receiving e-waste in an arid climate

Highlights: • E-waste comprises approximately 6% of the waste mass going to landfill in South Australia. • Significant amounts of metal(loids)s and PBDEs are released from e-waste mixed with municipal solid in landfill leachates. • Significantly elevated concentrations of lead and PBDEs are detected in groundwater wells downgradient of landfills. • Significant temporal variation exists in electrical conductivity and in the concentrations of As, Cd and Pb in leachates. - Abstract: The management of electronic waste (e-waste) is a serious problem worldwide and much of it is landfilled. A survey of four selected landfills in an arid region of South Australia was conducted to determine the proportion of e-waste in municipal waste and the properties of each landfill site. Leachate and groundwater samples were collected upgradient and downgradient of the landfills for analysis of polybrominated diphenyl ethers (PBDEs) and 14 metals and metalloids, including Al, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Ni, Pb, Sb, V and Zn. Our data demonstrate that the selected landfills in South Australia continue to receive municipal waste containing in excess of 6%, or 25,000 tonnes per year, of e-waste. The leachates and groundwater collected from the landfills contained significantly elevated concentrations of Pb with the highest concentration in groundwater of 38 μg/l, almost four times higher than the Australian drinking water guideline of 10 μg/l. The presence of PBDEs was detected in both leachate and groundwater samples. Total PBDEs values of 2.13–59.75 ng/l in leachate samples were 10 times higher than in groundwater samples, which recorded a range of 0.41–6.53 ng/l at all sites. Moreover, the concentrations of metals and metalloids in sampled groundwater contained elevated levels of Al, As, Fe, Ni and Pb that exceeded Australian drinking water guideline values. For these reasons potential leaching of these contaminants is of concern and while difficult to attribute elevated contaminant levels to e-waste, we do not recommend continued disposal of e-waste in old landfills that were not originally designed to contain leachates. The survey also revealed temporal variation in the electrical conductivity and concentrations of As, Cd and Pb present in leachates of landfills in arid Mediterranean climates. These results are consistent with the marked variations in rainfall patterns observed for such climates. The solute concentration (EC and other ions including As, Cd and Pb) declines in the leachates during wet winter months (June to September), in contrast to tropical countries where such changes are observed during wet summer months.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Diversifying Nanoparticle Assemblies in Supramolecule Nanocomposites Via Cylindrical Confinement

Many macroscopic properties such as collective chiral responses enhanced by coupled plasmonic nanoparticles require complex nanostructures. However, a key challenge is to directly assemble nanosized building blocks into functional entities with designed morphologies. For example, the DNA templated nanoparticle assembly has low scalability and requires aqueous conditions, while other approaches such as controlled drying and polymer templating access only simple 1-D, 2-D, and 3-D structures with limited assembly patterns. In this paper, we demonstrate a new self-assembly strategy that expands the diversity of 3-D nanoparticle assemblies. By subjecting supramolecular nanocomposites to cylindrical confinement, a range of new nanoparticle assemblies such as stacked rings and single and double helices can be readily obtained with a precisely defined morphology. Circular dichroism dark field scattering measurements on the single nanowire with Au helical ribbon-like assembly show chiral plasmonic response several orders of magnitude higher than that of natural chiral materials. The phase behavior of supramolecular nanocomposite under geometric constraints is quite different from that of block copolymer. Finally, it depends on the complex interplay among nanoparticle packing and phase behavior of parent block copolymers under confinement and can be governed by nanoparticle diffusion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Standardized Data to Improve Understanding and Modeling of Soil Nitrogen at Continental Scale

Abstract Nitrogen (N) is a key limiting nutrient in terrestrial ecosystems, but there remain critical gaps in our ability to predict and model controls on soil N cycling. This may be in part due to lack of standardized sampling across broad spatial–temporal scales. Here, we introduce a continentally distributed, publicly available data set collected by the National Ecological Observatory Network (NEON) that can help fill these gaps. First, we detail the sampling design and methods used to collect and analyze soil inorganic N pool and net flux rate data from 47 terrestrial sites. We address methodological challenges in generating a standardized data set, even for a network using uniform protocols. Then, we evaluate sources of variation within the sampling design and compare measured net N mineralization to simulated fluxes from the Community Earth System Model 2 (CESM2). We observed wide spatiotemporal variation in inorganic N pool sizes and net transformation rates. Site explained the most variation in NEON’s stratified sampling design, followed by plots within sites. Organic horizons had larger pools and net N transformation rates than mineral horizons on a sample weight basis. The majority of sites showed some degree of seasonality in N dynamics, but overall these temporal patterns were not matched by CESM2, leading to poor correspondence between observed and modeled data. Looking forward, these data can reveal new insights into controls on soil N cycling, especially in the context of other environmental data sets provided by NEON, and should be leveraged to improve predictive modeling of the soil N cycle.

54 ENVIRONMENTAL SCIENCES↗

Broadband unidirectional visible imaging using wafer-scale nano-fabrication of multi-layer diffractive optical processors

We present a broadband and polarization-insensitive unidirectional imager that operates at the visible part of the spectrum, where image formation occurs in one direction, while in the opposite direction, it is blocked. This approach is enabled by deep learning-driven diffractive optical design with wafer-scale nano-fabrication using high-purity fused silica to ensure optical transparency and thermal stability. Our design achieves unidirectional imaging across three visible wavelengths (covering red, green, and blue parts of the spectrum), and we experimentally validated this broadband unidirectional imager by creating high-fidelity images in the forward direction and generating weak, distorted output patterns in the backward direction, in alignment with our numerical simulations. This work demonstrates wafer-scale production of diffractive optical processors, featuring 16 levels of nanoscale phase features distributed across two axially aligned diffractive layers for visible unidirectional imaging. This approach facilitates mass-scale production of ~0.5 billion nanoscale phase features per wafer, supporting high-throughput manufacturing of hundreds to thousands of multi-layer diffractive processors suitable for large apertures and parallel processing of multiple tasks. Beyond broadband unidirectional imaging in the visible spectrum, this study establishes a pathway for artificial-intelligence-enabled diffractive optics with versatile applications, signaling a new era in optical device functionality with industrial-level, massively scalable fabrication.

36 MATERIALS SCIENCE↗

Note: Electrochemical cell for in operando X-ray diffraction measurements on a conventional X-ray diffractometer

Electrochemical in operando X-ray diffraction (XRD) is a powerful method to analyze structural changes of energy storage materials while inserting/de-inserting charge carriers, such as Li- or Na-ions, into/from a host structure. The design of an XRD in operando cell is presented, which enables the use of thin (6 μm) aluminum foil as X-ray window as a non-toxic alternative to conventional beryllium windows. Owing to the reduced thickness, diffraction patterns and their changes during cycling can be observed with excellent quality, which was demonstrated for two cathode materials for sodium-ion batteries in a half-cell set-up, P2-Na{sub 0.7}MnO{sub 2} and Na{sub 2.55}V{sub 6}O{sub 16} ⋅ 0.6H{sub 2}O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PyFaults: A Python Toolkit for Stacking Fault Screening

PyFaults is an open-source Python library designed to model stacking fault disorder in crystalline materials and qualitatively assess the characteristic selective broadening effects in powder X-ray diffraction (PXRD). Here, the main capabilities of PyFaults are presented, including unit cell and supercell model construction, PXRD pattern calculation, assessment against experimental PXRD, and methods for rapid screening of candidate models within a set of possible stacking vectors and fault occurrence probabilities. This program aims to serve as a computationally inexpensive tool for identifying and screening potential stacking fault models in materials with planar disorder. Three diverse case studies, involving GaN, Li2MnO3 and Li3YCl6, are presented to illustrate the program functionality across a range of structure types and stacking fault modalities.

MATHEMATICS AND COMPUTING↗

SU-F-T-230: A Simple Method to Assess Accuracy of Dynamic Wave Arc Irradiation Using An Electronic Portal Imaging Device and Log Files

Purpose: The Dynamic Wave Arc (DWA) technique, where the multi-leaf collimator (MLC) and gantry/ring move simultaneously in a predefined non-coplanar trajectory, has been developed on the Vero4DRT. The aim of this study is to develop a simple method for quality assurance of DWA delivery using an electronic portal imaging device (EPID) measurements and log files analysis. Methods: The Vero4DRT has an EPID on the beam axis, the resolution of which is 0.18 mm/pixel at the isocenter plane. EPID images were acquired automatically. To verify the detection accuracy of the MLC position by EPID images, the MLC position with intentional errors was assessed. Tests were designed considering three factors: (1) accuracy of the MLC position (2) dose output consistency with variable dose rate (160–400 MU/min), gantry speed (2.4–6°/s), ring speed (0.5–2.5°/s), and (3) MLC speed (1.6–4.2 cm/s). All the patterns were delivered to the EPID and compared with those obtained with a stationary radiation beam with a 0° gantry angle. The irradiation log, including the MLC position and gantry/ring angle, were recorded simultaneously. To perform independent checks of the machine accuracy, the MLC position and gantry/ring angle position were assessed using log files. Results: 0.1 mm intentional error can be detected by the EPID, which is smaller than the EPID pixel size. The dose outputs with different conditions of the dose rate and gantry/ring speed and MLC speed showed good agreement, with a root mean square (RMS) error of 0.76%. The RMS error between the detected and recorded data were 0.1 mm for the MLC position, 0.12° for the gantry angle, and 0.07° for the ring angle. Conclusion: The MLC position and dose outputs in variable conditions during DWA irradiation can be easily detected using EPID measurements and log file analysis. The proposed method is useful for routine verification. This research is (partially) supported by the Practical Research for Innovative Cancer Control (15Ack0106151h0001) from Japan Agency for Medical Research and development, AMED. Authors Takashi Mizowaki and Masahiro Hiraoka have consultancy agreement with Mitsubishi Heavy Industries, Ltd., Japan.

60 APPLIED LIFE SCIENCES↗

Scalable submicrometer additive manufacturing

High-throughput fabrication techniques for generating arbitrarily complex three-dimensional structures with nanoscale features are desirable across a broad range of applications. Two-photon lithography (TPL)–based submicrometer additive manufacturing is a promising candidate to fill this gap. However, the serial point-by-point writing scheme of TPL is too slow for many applications. Attempts at parallelization either do not have submicrometer resolution or cannot pattern complex structures. We overcome these difficulties by spatially and temporally focusing an ultrafast laser to implement a projection-based layer-by-layer parallelization. This increases the throughput up to three orders of magnitude and expands the geometric design space. We demonstrate this by printing, within single-digit millisecond time scales, nanowires with widths smaller than 175 nanometers over an area one million times larger than the cross-sectional area.

36 MATERIALS SCIENCE↗

Build Optimization Software Tools (BOOST) v2.0.0

Build Optimization Software Tools (BOOST) accelerate the design of DNA, RNA and protein sequences for their synthesis and assembly in an automated and scalable fashion. The BOOST Juggler automates the following two design tasks: - Reverse-Translation of protein sequences into DNA sequences - Codon Juggling of DNA sequences The BOOST Polisher provides the following design tasks: - The Verification of DNA sequences against DNA synthesis constraints - The Modification of DNA sequences in case they violate any DNA synthesis constraint In addition, the BOOST Polisher can be instructed to verify and modify DNA sequences against sequence patterns, such as restriction sites. The BOOST Partitioner supports both Gibson/chewback and Yeast assembly (also known as Transformation-Associated Recombination, or TAR) methods when performing the decomposition of large sequences that exceed the maximum length of DNA synthesis into synthesizable building blocks. The Partitioner can be instructed to find building blocks with appropriate overlap sequences, making their assembly into the complete construct more efficient. BOOST Workflows enable, in a customized fashion, the execution of the Juggler, Polisher, and Partitioner tools on a batch of sequences.

Sharkey, Michael↗

Airflow Simulations around OA Intake Louver with Electronic Velocity Sensors

It is important to control outdoor airflow rates into HVAC systems in terms of energy conservation and healthy indoor environment. Technologies are being developed to measure outdoor air (OA) flow rates through OA intake louvers on a real time basis. The purpose of this paper is to investigate the airflow characteristics through an OA intake louver numerically in order to provide suggestions for sensor installations. Airflow patterns are simulated with and without electronic air velocity sensors within cylindrical probes installed between louver blades or at the downstream face of the louver. Numerical results show quite good agreements with experimental data, and provide insights regarding measurement system design. The simulations indicate that velocity profiles are more spatially uniform at the louver outlet relative to between louver blades, that pressure drops imposed by the sensor bars are smaller with sensor bars at the louver outlet, and that placement of the sensor bars between louver blades substantially increases air velocities inside the louver. These findings suggest there is an advantage to placing the sensor bars at the louver outlet face.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A scalable messaging system for accelerating discovery from large scale scientific simulations

Emerging scientific and engineering simulations running at scale on leadership-class High End Computing (HEC) environments are producing large volumes of data, which has to be transported and analyzed before any insights can result from these simulations. The complexity and cost (in terms of time and energy) associated with managing and analyzing this data have become significant challenges, and are limiting the impact of these simulations. Recently, data-staging approaches along with in-situ and in-transit analytics have been proposed to address these challenges by offloading I/O and/or moving data processing closer to the data. However, scientists continue to be overwhelmed by the large data volumes and data rates. In this paper we address this latter challenge. Specifically, we propose a highly scalable and low-overhead associative messaging framework that runs on the data staging resources within the HEC platform, and builds on the staging-based online in-situ/in- transit analytics to provide publish/subscribe/notification-type messaging patterns to the scientist. Rather than having to ingest and inspect the data volumes, this messaging system allows scientists to (1) dynamically subscribe to data events of interest, e.g., simple data values or a complex function or simple reduction (max()/min()/avg()) of the data values in a certain region of the application domain is greater/less than a threshold value, or certain spatial/temporal data features or data patterns are detected; (2) define customized in-situ/in-transit actions that are triggered based on the events, such as data visualization or transformation; and (3) get notified when these events occur. The key contribution of this paper is a design and implementation that can support such a messaging abstraction at scale on high- end computing (HEC) systems with minimal overheads. We have implemented and deployed the messaging system on the Jaguar Cray XK6 machines at Oak Ridge National Laboratory and the Lonestar system at the Texas Advanced Computing Center (TACC), and we present the experimental performance evaluation using these HEC platforms in the paper.

Jin, Tong↗

Failure Analysis on Multivariate Time-series Data given Uncertain Labels

Machine failure analysis and detection is critical to today’s industrial society. Given a number of failure events on multivariate temporal data, the ability to identify 1) the discriminative patterns prior to the events and 2) the most relevant features to the failure has practical use for early warning and root cause analysis. However, since these patterns are not necessarily adjacent to the onset of failure in time, faulty labels are often with uncertainty, which makes traditional supervised detection methods inapplicable. To address the label uncertainty and learn the complicated correlation in multivariate time series, we design Failure Analysis on Multivariate Time-series Data (MAMT) that jointly selects the most failure-relevant features and time-instances by a novel dynamic and directional label diffusion process. Extensive experiments demonstrate that MAMT is more effective while more efficient than popular baselines.

97 MATHEMATICS AND COMPUTING↗

A study of transient FGR by integral LOCA tests

A study of transient fission gas release (FGR) was performed by means of two out-of-pile LOCA tests in a hot cell facility. Irradiated fuel rod segments with lengths of roughly 80 mm and burnups of 64 MWd/kgU were subjected to simulated water-cooled reactor LOCA transients in an integral LOCA test device. The segments were heated to a maximum temperature of 1000 Celsius degrees and the increase in rod inner pressure resulting from fission gas release and increased gas temperature during the transient was measured. The first release of gas occurred at temperatures close to 450 Celsius degrees, which suggests a burst release mechanism that may be linked to the onset of grain boundary fracturing. At the end of the simulated transients, gas samples were taken from the fuel rod segments for study by gas mass spectroscopy. The transient fission gas release was measured and amount to roughly 13 % of the calculated pre-test rod inventory of Kr and Xe. Isotopic ratios of the released gas indicated that transient FGR originated from the whole pellet and not only the pellet periphery. The tested segments were also studied by light-optical microscopy to determine pellet porosity, pellet crack pattern and fuel fragmentation. The extent of fine fuel fragmentation was found to be small and limited to the periphery of the fuel. The determined amount of transient fission gas release can be added to the database of fuel rod design codes to more accurately describe the LOCA cladding strains and burst temperatures in the future.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Joint Design of Multimodal Transit Networks and Shared Autonomous Mobility Fleets

Providing quality transit service to travelers in low-density areas, particularly travelers without personal vehicles, is a constant challenge for transit agencies. The advent of fully-autonomous vehicles (AVs) and their inclusion in mobility service fleets may allow transit agencies to offer better service and/or reduce their own capital and operational costs. This study focuses on the problem of allocating resources between transit patterns and operating (or subsidizing) shared-use AV mobility services (SAMSs) in a large metropolitan area. To address this question, a joint transit network redesign and SAMS fleet size determination problem (JTNR-SFSDP) is introduced, and a bi-level mathematical programming formulation and solution approach are presented. The upper-level problem modifies a transit network frequency setting problem (TNFSP) formulation via incorporating SAMS fleet size as a decision variable and allowing the removal of bus routes. The lower-level problem consists of a dynamic combined mode choice-traveler assignment problem (DCMC-TAP) formulation. The heuristic solution procedure involves solving the upper-level problem using a nonlinear programming solver and solving the lower-level problem using an iterative agent-based assignment-simulation approach. To illustrate the effectiveness of the modeling framework, this study uses traveler demand from Chicago along with the regions existing multimodal transit network. The computational results indicate significant traveler benefits, in terms of improved average traveler wait times, associated with optimizing the joint design of multimodal transit networks and SAMS fleets compared with the initial transit network design.

bi-level programming↗