Search NASA⌕ Search

SEARCH · Search NASA

Results for “FUNDAMENTAL SCIENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Injection photodiodes based on low-resistivity ZnS single crystals

Results of an experimental study of Ni-n-n{sup +}-In photodiode structures fabricated from a low-resistivity ZnS:Al crystal (n{sup +}-region) are reported. The high-resistivity compensated n-type layer is produced by thermal diffusion of silver. The photodiodes exhibit an injection amplification of the photocurrent under a forward bias of 1-10 V. The dependence of the currents through the diodes on the thickness of the n-type layer in the dark and under UV irradiation is determined. The photosensitivity is at a maximum in the fundamental absorption range in a narrow spectral band.

36 MATERIALS SCIENCE↗

Advanced Experimental Technique for Radiation Damage Effects in Nuclear Waste Forms: Neutron Total Scattering Analysis

For the past 30 years, the development of durable materials for radionuclide immobilization has been driven by efforts to dispose of wastes generated by the nuclear fuel cycle [National Research Council, ‘Waste Forms Technology and Performance: Final Report’, the National Academies Press, Washington D.C., 2011]. Many materials have been developed, but there still exist large gaps in the knowledge of fundamental modes of waste form degradation in repository environments. An important aspect of waste form science is the behavior of the materials under intense irradiation from decaying actinides and fission products. This irradiation induces a wide range of defects and disorder, the details of which depend on the specific waste form material. At the present time, it is not fully explained how radiation effects will influence the performance of nuclear waste forms and their long-term retention of fission products and actinides under operational conditions. The complex defect behavior and radiation damage must be understood over a range of length scales, from the initial atomic-scale defect structure to the long-range observable material modification. This is particularly challenging and requires advanced characterization techniques. This contribution describes how pair distribution function (PDF) analysis obtained from neutron total scattering experiments can be applied in the research field of waste form science to uniquely characterize radiation effects in a wide range of materials, including crystalline complex oxides and waste glasses. Neutron scattering strength does not have an explicit Z-dependence; this allows access to many low-Z elements, such as oxygen, that cannot be accurately studied with X-rays. In many cases, this can permit a detailed analysis of both cation (often high-Z) and anion (often low-Z) defect behavior. In contrast to traditional crystallography, which relies on long-range order, PDF analysis probes the local defect structure, including changes in site occupation, coordination, and bond distance. This is particularly important when characterizing aperiodic waste glasses with no long-range order at all. In contrast to X-ray characterization which requires very little sample mass (~0.1 mg), neutron characterization (even at state-of-the-art spallation facilities) requires relatively large sample mass (~50 - 100 mg). In conclusion, obtaining this quantity is challenging for studies of irradiated materials, but by tailoring our experimental approach to use high-energy ions (GeV) with very high penetration depth, we are able to produce the required mass.

36 MATERIALS SCIENCE↗

NIH Research Progress (Progress Report)

During the past year, the Resource continued to address three major gaps in the continued growth and application of AMS in biomedical research. The first identified gap is the lack of high throughput analysis coupled to molecular speciation, which can be solved by the development of an on-line fully integrated AMS-HPLC system. A second gap is the lack of robust methods for quantifying cellular metabolic endpoints for use in systems and cell biology applications. Understanding how to measure post-translational modifications, metabolic flux and metabolic rate with acceptable sensitivity, precision and reproducibility using substrate concentrations that are within the natural physiological range so that the normal metabolism is not perturbed is likewise important. This should become routine when the coupled AMS-HPLC system is available. Third, the ability to measure biological endpoints in humans is important and AMS offers the ability to do this safely. Our overall goal is to develop AMS and apply its quantitative capabilities to enable effective research in fundamental biology and human health.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrodynamic Self-Assembly of Topographical Patterns on Soft Materials

The objective of this project is to use theoretical tools to explore fundamentally new ways of creating and controlling surface topography on soft materials (e.g., polymeric liquids, gels, colloidal suspensions) that make use of principles from hydrodynamics and self-assembly. Surface topography is known to have a significant impact on the optical, adhesive, and wetting properties of materials, so improved fundamental understanding of how to create and control it will help enable the tailoring of these properties to desired specifications. Self-assembly is the spontaneous organization of an ordered structure, and hydrodynamics often plays an important role in the self-assembly of soft materials. This research supported through this project has led to the discovery of a number of novel phenomena that are described in published journal articles. In this way, the research significantly adds to the fundamental understanding of the topics investigated.

36 MATERIALS SCIENCE↗

Nonequilibrium Physics and Phase-Field Modeling of Multiphase Flow in Porous Media

The overarching goal of this project was to develop a new continuum theory of multiphase flow in porous media. The theory follows a phase-field modeling approach, and therefore has a sound thermodynamical basis. It is a phenomenological theory in the sense that its formulation is driven by macroscopic phenomena, such as viscous instabilities during multifluid displacement. The research agenda was organized around a set of hypothesis on hitherto unexplained behavior of multiphase flow. All these hypothesis are nontrivial, and testable. Indeed, a central aspect of the project was testing each hypothesis by means of carefully-designed laboratory experiments, therefore probing the validity of the proposed theory. The proposed research places an emphasis on the fundamentals of flow physics, but is motivated by important energy-driven applications in earth sciences, as well as microfluidic technology.

42 ENGINEERING↗

Nuclear Data 101: The Good, The Bad, and The Ugly

This lecture is an attempt to cover in one hour the fundamentals of what nuclear data are, where they come from and how they affect nuclear science applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dielectric Ceramics in Nanosheet Form. Final report

This is the final project report detailing the preparation and chemistry of dielectric nanosheets. The major aim of this project was to develop two-dimensional dielectric materials in parallel with efforts to develop two-dimensional semiconductors. Dielectrics are insulating materials that can be polarized, leading to outstanding ferroelectric, ferromagnetic, piezoelectric, pyroelectric, electrostrictive, and electro-optical properties. Dielectric materials are arguably equally important as metallic and semiconducting materials in device engineering, and thus dielectric nanosheets would be valuable building blocks in multitudinous downscaled applications. The specific goals of this project encompassed the development of innovative chemical synthesis methodologies for preparing dielectric materials in freestanding, two-dimensional <10 nm thickness (nanosheet) form; characterization of the fundamental properties of the resulting nanosheets;

36 MATERIALS SCIENCE↗

The Present and Future of QCD: QCD Town Meeting White Paper – An Input to the 2023 NSAC Long Range Plan

It is currently understood that there are four fundamental forces in nature: gravitational, electromagnetic, weak and strong forces. The strong force governs the interactions between quarks and gluons, elementary particles whose interactions give rise to the vast majority of visible mass in the universe. The mathematical description of the strong force is provided by the non-Abelian gauge theory Quantum Chromodynamics (QCD). While QCD is an exquisite theory, constructing the nucleons and nuclei from quarks, and furthermore explaining the behavior of quarks and gluons at all energies, remain to be complex and challenging problems. Such challenges, along with the desire to understand all visible matter at the most fundamental level, position the study of QCD as a central thrust of research in nuclear science. Experimental insight into the strong force can be gained using large particle accelerator facilities, which are necessary to probe the very short distance scales over which quarks and gluons interact. The Long Range Plans (LRPs) exercise of 1989 and 1996 led directly to the construction of two world-class facilities: the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (JLab) that is focused on studying how the structure of hadrons emerges from QCD (cold QCD research), and the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Lab (BNL) that aims at the discovery and study of a new state of matter, the quark-gluon plasma (QGP), at extremely high temperatures (hot QCD research). These past investments have produced major advances. Nucleons and nuclei are being studied with increasing precision with a unified description of the partonic structure utilizing multi-dimensional imaging. Significant progress has been made, paving the way towards a complete picture of how quarks and gluons give rise to the mass, spin, and momentum of the nucleon. In hot QCD, the QGP is created in the collisions of nuclei at RHIC and the Large Hadron Collider (LHC) and is observed to behave like a fluid with very low specific shear viscosity; the current goals are to understand how the fluid behavior emerges from QCD and to characterize the temperature (and chemical potential) dependence of the properties of the QGP. As this White Paper is written, current experimental programs at CEBAF, RHIC and the LHC continue to provide exciting near term opportunities to capitalize on the investments in experimental equipment and accelerator operations. Most importantly, the QCD community looks forward to the construction of the Electron Ion Collider (EIC) as a major new facility to push forward QCD research in the next decades, with significant focus on exploring the properties of gluons, the mediators of the strong force.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fundamental Physics Microgravity Sensitivity

An introduction followed by a brief discussion about the sensitivity to microgravity environment disturbances for some recent and planned experiments in microgravity fundamental physics will be presented. In particular, correlation between gravity disturbances and the quality of science data sets measured by the Confined Helium Experiment (CHEX) during ground testing and during the November 1997 USMP-4 flight will be described.

Israelsson, Ulf↗

Understanding Geospace on a Grand Scale: The Global Ionoshphere/Thermosphere Constellation

We present the concept of a constellation of polar orbiting satellites equally spaced in longitude (local time) to systematically sample both the neutral and ionzed gas components of the Earth in circular orbits near 350 km, including their density, temperature, and velocities. The instrumentation would include techniques to measure the height of the ionospheric "F-peak" and its variations along the orbit. The number of satellites (l2? 24? 48?) and their configuration would be determined from modeling analysis and expected geophysical phenomena, including their drivers and characteristic time scales. Together with imaging data from separate satellites, the array of satellites with in situ probes would be expected to provide a new picture of (1) high latitude electrodynamics and atmospheric processes and associated coupling with magnetospheric mass and momentum input, (2) the response of the global ionosphere and thermosphere to magnetic storms, and (3) global neutral wind circulation patterns, neutral density structure, tides, planetary waves, and gravity waves. The comprehensive measurements gathered by the IT-Constellation envisioned here would provide a major leap forward in each of these areas, addressing global physical processes and providing fundamental, new knowledge of Geospace. In particular, by its very nature, the constellation addresses "system science", revealing how the ionosphere-thermosphere connects globally to the magnetosphere above and the troposphere below. We present this concept as the next logical step in observing the "whole" space environment using in situ probes in conjunction with imagers. We invite modelers to not only comment on this concept but also to become actively engaged in helping to define it.

Pfaff, Robert↗

Artificial Intelligence - The Future of Space Communications

Presentation focus on the Cognitive Communications Project Overview. The project aims to develop cognitive communications technologies to increase mission science return and improve resource efficiencies. Another key aspect of the project is understanding the fundamental aspects of cognitive technology and developing artificial intelligence to advance the future of space communications. This involves the use of machine learning algorithms in the next generation architecture for space communications in the effort to increase efficiency, autonomy and increased performance of the space communication and navigations next generation architecture.

Briones, Janette C.↗

Future of Venus Research and Exploration

Despite the tremendous progress that has been made since the publication of the Venus II book in 1997, many fundamental questions remain concerning Venus' history, evolution and current geologic and atmospheric processes. The international science community has taken several approaches to prioritizing these questions, either through formal processes like the Planetary Decadal Survey in the United States and the Cosmic Vision in Europe, or informally through science definition teams utilized by Japan, Russia, and India. These questions are left to future investigators to address through a broad range of research approaches that include Earth-based observations, laboratory and modeling studies that are based on existing data, and new space flight missions. Many of the highest priority questions for Venus can be answered with new measurements acquired by orbiting or in situ missions that use current technologies, and several plausible implementation concepts have been studied and proposed for flight. However, observations needed to address some science questions pose substantial technological challenges, for example, long term survival on the surface of Venus and missions that require surface or controlled aerial mobility. Missions enabled by investments in these technologies will open the door to completely new ways of exploring Venus to provide unique insights into Venus's past and the processes at work today.

Glaze, Lori S.↗

Space Biology Beyond LEO Instrumentation & Science Series - Science Working Group 2021 Annual Report

Human space exploration was never intended to stop within low Earth orbit (LEO). Although nearly all of biological research in space has taken place in LEO, on the Space Shuttle, International Space Station (ISS), and free-flyer CubeSat missions, NASA's recent shift in emphasis toward human exploration of the Moon and ultimately Mars necessitates a shift in the focus of its research in the biological sciences [1]. Specifically, in 2022 and beyond, the Division of Biological and Physical Sciences seeks to pivot toward a focus on Thriving In DEep Space (TIDES), furthering the fundamental research necessary for understanding risks and mitigation strategies for deep-space stressors on human crew, plants, and their microbiomes. This effort entails both research on model organisms to elucidate the molecular processes underlying the biological consequences of deep-space exposure, and research on the organisms that will be necessary companions to sustain life and facilitate resource utilization in long-duration missions.

R Craig Everroad↗

New Materials for Clean Energy Technologies

What does a successful innovation pipeline look like? It starts with fundamental research into properties of materials important for energy technologies, supported by the Basic Energy Sciences (BES) office of DOE. Potentially important discoveries are passed on to applied research supported by DOE’s Energy Efficiency and Renewable Energy (EERE) office, which often partners with or licenses technology to private sector entities. The process usually takes two or three decades, but has repeatedly resulted in the commercialization of new energy technologies.

36 MATERIALS SCIENCE↗

X-ray diffraction technique

This is a guest lecture for University of Idaho graduate-level course Chemical and Materials Analysis. I will be talking about the fundamentals of X-ray Diffraction technique and some examples for its application in material science research.

36 MATERIALS SCIENCE↗

Development of MCNP Training Modules for Safeguards Practitioners [Abstract]

The Monte-Carlo N-Particle (MCNP) software developed at LANL is the most widely used neutron transport code in the world. It is an essential tool for a variety of applications including detector development and design, nuclear fuel burnup simulation, criticality safety, and nondestructive assay system optimization. For this reason, it is indispensable within the safeguards and materials control & accountability (MC&A) communities. Multiple MCNP training courses have been created and taught over the last several decades by the MCNP development team at LANL, however there are no existing courses that cover specialized topics considered fundamental to NDA and safeguards models. To fill this gap, the MCNP team and Safeguards Science and Technology group at LANL have co-created a set of training modules customized to meet the specialized needs of the safeguards and MC&A communities. The basic modules cover concepts such as NDA system optimization, He-specific and other capture tallies, and tools for improved theoretical understanding. An advanced module was also created to cover topics including variance reduction for active interrogation simulations, use of the LANL MCNPTools post-processor, PTRAC (particle tracking) and list-mode data simulations, and fuel burnup simulations. The training modules teach to the latest and most state-of-the-art MCNP features and tools released by the development team at LANL and are intended to be taught jointly by the developers and safeguards experts. Ultimately, we hope that creation of these modules will serve to capture and convey the safeguards modeling and MCNP expertise at LANL, and that we will be able to share the modules more broadly with the MC&A and safeguards communities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mode matching method for absorption spectroscopy systems

Systems and methods for controlling optical feedback in an optical system. A resonant optical cavity includes at least two cavity mirrors, one of which is a cavity coupling mirror, and has a plurality of optical resonance cavity modes. A radiation source emits a beam of continuous wave radiation and is capable of being scanned whereby a mean optical frequency of the continuous wave radiation beam is adjustable over a range of frequencies, wherein the radiation source is responsive to optical feedback radiation emerging from the cavity, and wherein the mode matching optics couples the beam of continuous wave radiation to the cavity via the cavity coupling mirror. The radiation source and the mode matching optics are aligned so that a mode fill ratio is reduced relative to a maximum mode fill ratio, wherein the laser beam is coupled with a fundamental cavity mode.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗