Search NASA⌕ Search

SEARCH · Search NASA

Results for “Generalized Linear Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Real-time Adaptive Control Using Neural Generalized Predictive Control

The objective of this paper is to demonstrate the feasibility of a Nonlinear Generalized Predictive Control algorithm by showing real-time adaptive control on a plant with relatively fast time-constants. Generalized Predictive Control has classically been used in process control where linear control laws were formulated for plants with relatively slow time-constants. The plant of interest for this paper is a magnetic levitation device that is nonlinear and open-loop unstable. In this application, the reference model of the plant is a neural network that has an embedded nominal linear model in the network weights. The control based on the linear model provides initial stability at the beginning of network training. In using a neural network the control laws are nonlinear and online adaptation of the model is possible to capture unmodeled or time-varying dynamics. Newton-Raphson is the minimization algorithm. Newton-Raphson requires the calculation of the Hessian, but even with this computational expense the low iteration rate make this a viable algorithm for real-time control.

Haley, Pam↗

Shape and Stress Sensing of Multilayered Composite and Sandwich Structures Using an Inverse Finite Element Method

The marked increase in the use of composite and sandwich material systems in aerospace, civil, and marine structures leads to the need for integrated Structural Health Management systems. A key capability to enable such systems is the real-time reconstruction of structural deformations, stresses, and failure criteria that are inferred from in-situ, discrete-location strain measurements. This technology is commonly referred to as shape- and stress-sensing. Presented herein is a computationally efficient shape- and stress-sensing methodology that is ideally suited for applications to laminated composite and sandwich structures. The new approach employs the inverse Finite Element Method (iFEM) as a general framework and the Refined Zigzag Theory (RZT) as the underlying plate theory. A three-node inverse plate finite element is formulated. The element formulation enables robust and efficient modeling of plate structures instrumented with strain sensors that have arbitrary positions. The methodology leads to a set of linear algebraic equations that are solved efficiently for the unknown nodal displacements. These displacements are then used at the finite element level to compute full-field strains, stresses, and failure criteria that are in turn used to assess structural integrity. Numerical results for multilayered, highly heterogeneous laminates demonstrate the unique capability of this new formulation for shape- and stress-sensing.

Cerracchio, Priscilla↗

PolyFit: A C++ code for Polynomial Curve Fit with Calculation of Error Bars

In radiobiology, many dose-response results are modeled using the so-called linear-quadratic (LQ)model, which means that results are modeled as a function of dose Das 𝑅(𝐷)=𝛽0+𝛽1𝐷+𝛽2𝐷2. The coefficients 𝛽0, 𝛽1and 𝛽2are obtained from fitting a series of data points (𝑥𝑖, 𝑦𝑖), which is usually done using a least-square method. The LQ and more generally the polynomial fit capability is implemented in many software that analyzes data. However, there are some instances where the fitting needs to be done programmatically. Furthermore, depending on the software used, some features may not be implemented. In this mini-review, I discuss the basis of polynomial fitting, including the calculation of errors on the coefficients and results, use of weighting and fixing the intercept value (the coefficient 𝛽0). A simple C++ code to perform the polynomial curve fitting is also provided. This code should be useful not only in radiobiology but in other fields of science as well.

Ianik Plante↗

PolyFit: A C++ code for Polynomial Curve Fit with Calculation of Error Bars

In radiobiology, many dose-response results are modeled using the so-called linear-quadratic(LQ)model, which means that results are modeled as a function of dose Das 𝑅(𝐷)=𝛽0+𝛽1𝐷+𝛽2𝐷2. The coefficients 𝛽0, 𝛽1and 𝛽2are obtained from fitting a series of data points (𝑥𝑖,𝑦𝑖), which is usually done using a least-square method. The LQ and more generally the polynomial fit capability is implemented in many software that analyzes data. However, it is often convenient to do the fitting programmatically, especially when a large number of datasets should be analyzed. Furthermore, depending on the software used, some features may not be implemented. In this mini-review, I discuss the basis of polynomial fitting, including the calculation of errors on the coefficients and results, use of weighting and fixing the intercept value (the coefficient 𝛽0). A simple C++ code to perform the polynomial curve fitting is also provided. This code should be useful not only in radiobiology but in other fields of science as well.

Ianik Plante↗

Brane induced gravity, its ghost and the cosmological constant problem

''Brane Induced Gravity'' is regarded as a promising framework for addressing the cosmological constant problem, but it also suffers from a ghost instability for parameter values that make it phenomenologically viable. We carry out a detailed analysis of codimension > 2 models employing gauge invariant variables in a flat background approximation. It is argued that using instead a curved background sourced by the brane would not resolve the ghost issue, unless a very specific condition is satisfied (if satisfiable at all). As for other properties of the model, from an explicit analysis of the 4-dimensional graviton propagator we extract a mass, a decay width and a momentum dependent modification of the gravitational coupling for the spin 2 mode. In the flat space approximation, the mass of the problematic spin 0 ghost is instrumental in filtering out a brane cosmological constant. The mass replaces a background curvature that would have had the same function. The optical theorem is used to demonstrate the suppression of graviton leakage into the uncompactified bulk. Then, we derive the 4-dimensional effective action for gravity and show that general covariance is spontaneously broken by the bulk-brane setup. This provides a natural realization of the gravitational Higgs mechanism. We also show that the addition of extrinsic curvature dependent terms has no bearing on linearized brane gravity.

79 ASTRONOMY AND ASTROPHYSICS↗

Coupling of kinetic Monte Carlo simulations of surface reactions to transport in a fluid for heterogeneous catalytic reactor modeling

We have developed a method to couple kinetic Monte Carlo simulations of surface reactions at a molecular scale to transport equations at a macroscopic scale. This method is applicable to steady state reactors. We use a finite difference upwinding scheme and a gap-tooth scheme to efficiently use a limited amount of kinetic Monte Carlo simulations. In general the stochastic kinetic Monte Carlo results do not obey mass conservation so that unphysical accumulation of mass could occur in the reactor. We have developed a method to perform mass balance corrections that is based on a stoichiometry matrix and a least-squares problem that is reduced to a non-singular set of linear equations that is applicable to any surface catalyzed reaction. The implementation of these methods is validated by comparing numerical results of a reactor simulation with a unimolecular reaction to an analytical solution. Furthermore, the method is applied to two reaction mechanisms. The first is the ZGB model for CO oxidation in which inevitable poisoning of the catalyst limits the performance of the reactor. The second is a model for the oxidation of NO on a Pt(111) surface, which becomes active due to lateral interaction at high coverages of oxygen. This reaction model is based on ab initio density functional theory calculations from literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phenomenology of dark energy: exploring the space of theories with future redshift surveys

We use the effective field theory of dark energy to explore the space of modified gravity models which are capable of driving the present cosmic acceleration. We identify five universal functions of cosmic time that are enough to describe a wide range of theories containing a single scalar degree of freedom in addition to the metric. The first function (the effective equation of state) uniquely controls the expansion history of the universe. The remaining four functions appear in the linear cosmological perturbation equations, but only three of them regulate the growth history of large scale structures. We propose a specific parameterization of such functions in terms of characteristic coefficients that serve as coordinates in the space of modified gravity theories and can be effectively constrained by the next generation of cosmological experiments. We address in full generality the problem of the soundness of the theory against ghost-like and gradient instabilities and show how the space of non-pathological models shrinks when a more negative equation of state parameter is considered. This analysis allows us to locate a large class of stable theories that violate the null energy condition (i.e. super-acceleration models) and to recover, as particular subsets, various models considered so far. Finally, under the assumption that the true underlying cosmological model is the Λ Cold Dark Matter (ΛCDM) scenario, and relying on the figure of merit of EUCLID-like observations, we demonstrate that the theoretical requirement of stability significantly narrows the empirical likelihood, increasing the discriminatory power of data. We also find that the vast majority of these non-pathological theories generating the same expansion history as the ΛCDM model predict a different, lower, growth rate of cosmic structures.

79 ASTRONOMY AND ASTROPHYSICS↗

A Fully Second Order Implicit/Explicit Time Integration Technique for Hydrodynamics Plus Nonlinear Heat Conduction Problems

We present a second order non-linearly consistent implicit/explicit time integration tech¬nique for solving hydrodynamics coupled with nonlinear heat conduction problems. The idea is to hybridize an implicit and an explicit discretization in a nonlinearly consistent way in order to achieve second order time convergent calculations. In this scope, the hydrody¬namics equations are discretized explicitly making use of the capability of well-understood explicit schemes. On the other hand , the nonlinear heat conduction is solved implicitly. Such methods are often referred to as IMEX methods [2,1,3]. The Jacobian-Free Newton Krylov (JFNK) method (e.g, [10,9]) is applied to the problem in such a way as to render a nonlinearly iterated IMEX method. We solve three test problems in order to validate the nu-merical order of the scheme. For each test, we established second order time convergence. We support these numerical results with a Modi?ed Equation Analysis (MEA) [23,22]. The set of equations studied here constitute a base model for radiation hydrodynamics.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Treecode-based generalized Born method

We have developed a treecode-based O(N log N) algorithm for the generalized Born (GB) implicit solvation model. Our treecode-based GB (tGB) is based on the GBr6 [J. Phys. Chem. B 111, 3055 (2007)], an analytical GB method with a pairwise descreening approximation for the R6 volume integral expression. The algorithm is composed of a cutoff scheme for the effective Born radii calculation, and a treecode implementation of the GB charge–charge pair interactions. Test results demonstrate that the tGB algorithm can reproduce the vdW surface based Poisson solvation energy with an average relative error less than 0.6% while providing an almost linear-scaling calculation for a representative set of 25 proteins with different sizes (from 2815 atoms to 65456 atoms). For a typical system of 10k atoms, the tGB calculation is three times faster than the direct summation as implemented in the original GBr6 model. Thus, our tGB method provides an efficient way for performing implicit solvent GB simulations of larger biomolecular systems at longer time scales.

59 BASIC BIOLOGICAL SCIENCES↗

Assessing Component Effects in Formulation Systems

The purpose of Snee (2011) was to discuss and illustrate how using Six Sigma concepts and approaches can lead to a better understanding of formulation systems. Central to the recommended approach is estimating and interpreting the effects of the components in the formulation on the response variable. Knowledge of components that have no effect, small or large effects (positive or negative), and similar effects is very helpful in understanding how the formulation system works. This understanding helps one decide 1) which components having large effects should be increased or decreased, and 2) what to do about components with no effects or similar effects. Correspondence between the authors following Snee (2011), along with further review of the literature, have pointed out that the approaches discussed in Snee (2011), and the interpretation of component effects in general, need further clarification. That is the focus of this article.

component effect directions↗

Signatures of photon and axion-like particle mixing in the gamma-ray burst jet

Photons couple to Axion-Like Particles (ALPs) or more generally to any pseudo Nambu-Goldstone boson in the presence of an external electromagnetic field. Mixing between photons and ALPs in the strong magnetic field of a Gamma-Ray Burst (GRB) jet during the prompt emission phase can leave observable imprints on the gamma-ray polarization and spectrum. Mixing in the intergalactic medium is not expected to modify these signatures for ALP mass > 10{sup −14} eV and/or for < nG magnetic field. We show that the depletion of photons due to conversion to ALPs changes the linear degree of polarization from the values predicted by the synchrotron model of gamma ray emission. We also show that when the magnetic field orientation in the propagation region is perpendicular to the field orientation in the production region, the observed synchrotron spectrum becomes steeper than the theoretical prediction and as detected in a sizable fraction of GRB sample. Detection of the correlated polarization and spectral signatures from these steep-spectrum GRBs by gamma-ray polarimeters can be a very powerful probe to discover ALPs. Measurement of gamma-ray polarization from GRBs in general, with high statistics, can also be useful to search for ALPs.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigating vibrational anharmonic couplings in cyanide-bridged transition metal mixed valence complexes using two-dimensional infrared spectroscopy

Using polarization-selective two-dimensional infrared (2D IR) spectroscopy, we measure anharmonic couplings and angles between the transition dipole moments of the four cyanide stretching (ν{sub CN}) vibrations found in [(NH{sub 3}){sub 5}Ru{sup III}NCFe{sup II}(CN){sub 5}]{sup −} (FeRu) dissolved in D{sub 2}O and formamide and [(NC){sub 5}Fe{sup II}CNPt{sup IV}(NH{sub 3}){sub 4}NCFe{sup II}(CN){sub 5}]{sup 4−} (FePtFe) dissolved in D{sub 2}O. These cyanide-bridged transition metal complexes serve as model systems for studying the role of high frequency vibrational modes in ultrafast photoinduced charge transfer reactions. Here, we focus on the spectroscopy of the ν{sub CN} modes in the electronic ground state. The FTIR spectra of the ν{sub CN} modes of the bimetallic and trimetallic systems are strikingly different in terms of frequencies, amplitudes, and lineshapes. The experimental 2D IR spectra of FeRu and FePtFe and their fits reveal a set of weakly coupled anharmonic ν{sub CN} modes. The vibrational mode anharmonicities of the individual ν{sub CN} modes range from 14 to 28 cm{sup −1}. The mixed-mode anharmonicities range from 2 to 14 cm{sup −1}. In general, the bridging ν{sub CN} mode is most weakly coupled to the radial ν{sub CN} mode, which involves the terminal CN ligands. Measurement of the relative transition dipole moments of the four ν{sub CN} modes reveal that the FeRu molecule is almost linear in solution when dissolved in formamide, but it assumes a bent geometry when dissolved in D{sub 2}O. The ν{sub CN} modes are modelled as bilinearly coupled anharmonic oscillators with an average coupling constant of 6 cm{sup −1}. This study elucidates the role of the solvent in modulating the molecular geometry and the anharmonic vibrational couplings between the ν{sub CN} modes in cyanide-bridged transition metal mixed valence complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Quasi-Linear Behavioral Model and an Application to Self-Directed Learning

A model is presented that describes the relationship between one's knowledge of the world and the concomitant personal behaviors that serve as a mechanism to obtain desired outcomes. Integrated within this model are the differing roles that outcomes serve as motivators and as modifiers to one's worldview. The model is dichotomized between general and contextual applications. Because learner self-directedness (a personal characteristic) involves cognition and affection while self-directed learning (a pedagogic process) encompasses conation, behavior and introspection, the model can be dichotomized again in another direction. Presented also are the roles that cognitive motivation theories play in moving an individual through this behavioral model and the roles of wishes, self-efficacy, opportunity and self-influence.

Ponton, Michael K.↗

The General Atomics Center for Magnetohydrodynamic Modeling (CEMM) Final Report

The Center for Extended Magnetohydrodynamic Modeling (CEMM) is built around the further development, verification, validation, and other application of two major extended magnetohydrodynamics (MHD) codes NIMROD and M3D-C1. The General Atomics (GA) CEMM Program focuses on three main research areas: extension of the M3D-C1 MHD code plasma response calculations to new regimes, coupling of the DK4D drift kinetic equation solver to a temperature evolution equation, and simulations of disruption mitigation for unstable plasmas with pre-existing magnetic islands using massive gas injection (MGI) with the NIMROD MHD code. A systematic scan of the zero-crossing of the rotation profile in a DIII-D ITER-similar shape equilibrium using linear, time-independent modeling with M3D-C1 was performed. A new Python utility, autoC1, has been developed to automate the running of M3D-C1 for linear simulations. A number of ELM suppression experiments were analyzed including a validation and cross-code verification with the MARS-F MHD code of magnetic signal phase shifts across ELM-suppression bifurcations. A linearized, time-dependent temperature equation was tightly coupled to the electron and ion drift-kinetic equations (DKEs) in the DK4D drift-kinetic equation solver. Various explicit and implicit implementations were attempted, but all methods proved numerically unstable, even with the addition of numerical dissipation. Several simulations were completed investigating the effects of pre-existing islands on disruption mitigation by MGI in DIII-D using NIMROD.

3D MHD Simulation↗

Linearly first- and second-order, unconditionally energy stable schemes for the phase field crystal model

In this paper, we develop a series of linear, unconditionally energy stable numerical schemes for solving the classical phase field crystal model. The temporal discretizations are based on the first order Euler method, the second order backward differentiation formulas (BDF2) and the second order Crank–Nicolson method, respectively. The schemes lead to linear elliptic equations to be solved at each time step, and the induced linear systems are symmetric positive definite. We prove that all three schemes are unconditionally energy stable rigorously. Various classical numerical experiments in 2D and 3D are performed to validate the accuracy and efficiency of the proposed schemes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the Design, Development, and Analysis of Optimized Matrix-Vector Multiplication Routines for Coprocessors

The manycore paradigm shift, and the resulting change in modern computer architectures, has made the development of optimal numerical routines extremely challenging. In this work, we target the development of numerical algorithms and implementations for Xeon Phi coprocessor architecture designs. In particular, we examine and optimize the general and symmetric matrix-vector multiplication routines (gemv/symv), which are some of the most heavily used linear algebra kernels in many important engineering and physics applications. We describe a successful approach on how to address the challenges for this problem, starting with our algorithm design, performance analysis and programing model and moving to kernel optimization. Our goal, by targeting low-level and easy to understand fundamental kernels, is to develop new optimization strategies that can be effective elsewhere for use on manycore coprocessors, and to show significant performance improvements compared to existing state-of-the-art implementations. Therefore, in addition to the new optimization strategies, analysis, and optimal performance results, we finally present the significance of using these routines/strategies to accelerate higher-level numerical algorithms for the eigenvalue problem (EVP) and the singular value decomposition (SVD) that by themselves are foundational for many important applications.

Kabir, Khairul↗

DC conductivity from backreacted non-linear arcsin electrodynamics

Highlights: • This model, reproduces conductivity and Hall angle of high-T{sub c} cuprates. • It exhibits metal-insulator transition under variation of magnetic field. • Obtained transport properties for a backreacted non-linear electrodynamics model. - Abstract: We consider arcsin electrodynamics in a holographic set up along with dilatonic and axionic scalar fields. Considering backreaction of the matter fields on the geometry we study direct conductivity of the dual theory and obtain the conductivity matrix. Since obtaining an exact solution is difficult in general, we have studied several limiting cases. In particular, at the strong momentum dissipation limit, we find for hyperscaling violating geometry as the background, the resistivity and Hall coefficient will behave as ∼T and ∼T{sup 2} respectively. Then we restrict to a simpler model, where we find that the variation of the magnetic field can lead to metal–insulator transition/crossover.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparing D-optimal designs with common mixture experimental designs for logistic regression

Mixture experiments are used in applications where the proportion of mixing components affects a response variable, such as in studies involving chemical formulations. In many applications, the response is dichotomous or binary (e.g., pass or fail) and a concern for researchers is how to efficiently and informatively design such experiments. A naive approach is to use design recommendations derived from linear normal-theory models with constant variance. In this research, we investigate the potential risks of such designs by comparing them to D-optimal mixture designs for binary responses and evaluating the D-efficiency of these design alternatives for several parameter subspaces. Standard designs for normal theory models generally do not work well for binary responses due to the tendency of these designs to favor boundary points. In addition, D-optimal mixture designs for binary responses tend to locate design points in the region where the magnitude of predicted response probabilities are moderate. Lastly, we recommend that researchers pay close attention to what is known about the characteristics of the underlying process models in selecting appropriate mixture designs for binary-response applications.

D-optimality↗