Search NASA⌕ Search

SEARCH · Search NASA

Results for “Identifiability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Identifying Deformation and Strain Hardening Behaviors of Nanoscale Metallic Multilayers Through Nano-wear Testing

In complex loading conditions (e.g. sliding contact), mechanical properties, such as strain hardening and initial hardness, will dictate the long-term performance of materials systems. With this in mind, the strain hardening behaviors of Cu/Nb nanoscale metallic multilayer systems were examined by performing nanoindentation tests within nanoscratch wear boxes and undeformed, as-deposited regions. Both the architecture and substrate influence were examined by utilizing three different individual layer thicknesses (2, 20, and 100 nm) and two total film thicknesses (1 and 10 μm). After nano-wear deformation, multilayer systems with thinner layers showed less volume loss as measured by laser scanning microscopy. Additionally, the hardness of the deformed regions significantly rose with respect to the as-deposited measurements, which further increased with greater wear loads. Strain hardening exponents for multilayers with thinner layers (2 and 20 nm, n ≈ 0.018 and n ≈ 0.022 respectively) were less than was determined for 100 nm systems (n ≈ 0.041). These results suggest that singledislocation based deformation mechanisms observed for the thinner systems limit the extent of achievable strain hardening. This conclusion indicates that impacts of both architecture strengthening and strain hardening must be considered to accurately predict multilayer performance during sliding contact across varying length scales.

36 MATERIALS SCIENCE↗

Using In Situ Neutron Diffraction to Isolate Specific Features of Additively Manufactured Microstructures in 304L Stainless Steel and Identify Their Effects on Macroscopic Strength

Additive manufacturing of metal components results in unique microstructures with, necessarily, mechanical properties that are distinct from conventionally produced components. In this paper, four distinct microstructural features associated with directed energy deposition of 304L stainless steels, their stability, and their influences on flow strength were examined. These were (1) high dislocation density comparable with deformed materials, (2) increased ferrite content, (3) local chemical heterogeneity, and (4) tortuous grain morphology. In situ neutron diffraction measurements were used to monitor the evolution of the as-built microstructure during post-build heat treatment and relate the specific microstructural features to the strength behavior of the material following the heat treatment. The increased flow strength of the additively manufactured material relative to wrought counterparts is found to be due primarily to an increased dislocation density in the as-built material. However, the increased dislocation density does not completely account for the increased strength and it is hypothesized that some of the additional strength is related to the unique AM grain structure.

36 MATERIALS SCIENCE↗

Fundamental Issues Identified for Thermodynamic Description of Molten Salt Systems

Thermodynamic modeling of the molten salt systems is critical in the design of advanced nuclear power plants, materials recycling, and many other important clean energy applications. As one of the most capable computational thermodynamic approaches, the CALPHAD (Calculation of Phase Diagrams) method has been widely used for multicomponent thermodynamic database development and further support more physics-based modeling. Although considerable CALPHAD modeling efforts for molten salt systems have been made, we found that no evaluation has been performed regarding the unary thermodynamic models for the molten salt systems despite the fact that more than one pure substance database is available for the CALPHAD modeling. Therefore, the thermodynamic descriptions of the pure salts should be critically evaluated to ensure a high-fidelity molten salt thermodynamic database. In this work, we comprehensively analyzed some selected molten salts using different available thermodynamic descriptions from two databases as an example. One is the SSUB database released by the SGTE (Scientific Group Thermodata Europe), and the other is the FactPS database from the FactSage. Finally, the significant discrepancies observed in the thermodynamic description between the existing CALPHAD pure substance databases and experiments call for an urgent effort to improve.

42 ENGINEERING↗

High-throughput screening identifies small molecules that bind to the RAS:SOS:RAS complex and perturb RAS signaling

K-RAS is mutated in approximately 30% of human cancers, resulting in increased RAS signaling and tumor growth. Thus, RAS is a highly validated therapeutic target, especially in tumors of the pancreas, lung and colon. Although directly targeting RAS has proven to be challenging, it may be possible to target other proteins involved in RAS signaling, such as the guanine nucleotide exchange factor Son of Sevenless (SOS). We have previously reported on the discovery of small molecules that bind to SOS1, activate SOS-mediated nucleotide exchange on RAS, and paradoxically inhibit ERK phosphorylation. In this paper, we describe the discovery of additional, structurally diverse small molecules that also bind to SOS1 in the same pocket and elicit similar biological effects. We tested>160,000 compounds in a fluorescence-based assay to assess their effects on SOS-mediated nucleotide exchange. X-Ray structures revealed that these small molecules bind to the CDC25 domain of SOS1. Compounds that elicited high levels of nucleotide exchange activity in vitro increased RAS-GTP levels in cells, and inhibited phospho ERK levels at higher treatment concentrations. The identification of structurally diverse SOS1 binding ligands may assist in the discovery of new molecules designed to target RASdriven tumors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-throughput surface characterization to identify porosity defects in additively manufactured 316L stainless steel

In the present study, a high throughput (HT) methodology is applied to rapidly assess the surface characteristics of 83 additively manufactured 316L stainless steel. The variation in surface roughness (S a ) showed a good correlation with a dimensionless number (π) and provided direct linkages to the internal porosity defects. Lack-of-fusion regime relates to high surface roughness (S a > 5 µm), low dimensionless number (π < 61), and the presence of cavities in between the melt pool tracks. Balling regime correlates to high surface roughness (S a > 5 µm), intermediate dimensionless number (61 < π < 146), and non-uniform melt pool track width. Keyhole regime shows low surface roughness (S a < 5 µm), high dimensionless number (π > 146), and a curved melt pool track. This approach accelerates the process parameter discovery and minimizes the porosity defects for the LPBF process. The impact of the defects on the as-processed tensile mechanical properties demonstrates that samples with porosity exhibit up to 10% less tensile strength and 30% less ductility than optimal samples.

316L stainless steel↗

ICAT: A numerical scheme to minimize numerical diffusion in advection-dispersion modeling and its application in identifying flow channeling

The advection-dispersion equation for scalar transport is essential for the numerical modeling of many fluid dynamics problems. However, solutions from numerical schemes always suffer from numerical diffusion and/or oscillation. In this study, we develop an Intra-Cell Advection Tracking (ICAT) scheme to minimize numerical diffusion and preserve monotonicity for advection-dispersion modeling. The key idea is to introduce “queues” in each discretized cell, and using a sequential transport rule and a flow distribution mechanism to track the scalar transport in these queues temporally and spatially. The capability and limitations of ICAT are first investigated through three test cases. Compared with the results obtained from other numerical schemes, the results from ICAT show substantially reduced numerical diffusion and agree better with analytical solutions. We also employ ICAT to simulate the transport process of a conservative tracer in a fracture with a highly heterogeneous aperture distribution. We report discrete flow channels in the fracture are better discerned by ICAT than by other numerical schemes, indicating the suitability of ICAT for modeling tracer transport in channelized flow fields.

15 GEOTHERMAL ENERGY↗

Numerical investigations to identify environmental factors for field-scale reactive transport of pathogens at riverbank filtration sites

While induced bank filtration is a proven method for facilitating sustainable drinking water production, it is at risk from surface water contaminations (e.g., pathogens). Induced bank filtration and pathogen transport in groundwater have been studied extensively. However, long-term studies that consider real-world conditions are missing. These conditions include seasonal changes to environmental conditions and waterworks operations. Therefore, to analyze the effect of seasonal changes on the transport of human pathogenic viruses and their indicators in induced bank filtration, concentrations of adenoviruses and pathogen indicators were monitored over 16 months at an active bank filtration plant at the Rhine River, in Düsseldorf (Germany). Based on this data, a 2D groundwater model was created in PFLOTRAN that simulated flow, heat transport, conservative transport of chloride and the resulting electrical conductivity, reactive transport of oxygen and nitrate, and colloid-based transport of coliforms, somatic coliphages, and adenoviruses. The results show that reduced travel time was the key factor determining periods with a low removal of coliforms and somatic coliphages in the aquifer. Travel time was controlled by river level variations during rainy seasons, and the waterworks extraction rates during dry seasons. Further, for adenovirus transport, travel distance in the subsurface appeared to be the key factor, while travel time had no significant impact. Coliform removal increased when the colmation layer permeability decreased, while coliphage and adenovirus removal was unaffected by the colmation layer permeability. Seasonal changes in temperature and oxygen content did not significantly impact the removal of coliphages and adenoviruses in groundwater. Denitrifying conditions correlated with a lowered coliform removal, but the modelling could not establish a connection between denitrifying conditions and coliform removal. Our study showed that removal of pathogens and pathogen indicators at induced bank filtration plants varies greatly in time and space (e.g., for coliforms from 1 to 4 log-levels at 20m travel distance), and that adenovirus transport differs considerably from transport of coliforms and somatic coliphages.

59 BASIC BIOLOGICAL SCIENCES↗

Sequence Analysis of 20,453 Severe Acute Respiratory Syndrome Coronavirus 2 Genomes from the Houston Metropolitan Area Identifies the Emergence and Widespread Distribution of Multiple Isolates of All Major Variants of Concern

Since the beginning of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic, there has been international concern about the emergence of virus variants with mutations that increase transmissibility, enhance escape from the human immune response, or otherwise alter biologically important phenotypes. In late 2020, several variants of concern emerged globally, including the UK variant (B.1.1.7), the South Africa variant (B.1.351), Brazil variants (P.1 and P.2), and two related California variants of interest (B.1.429 and B.1.427). These variants are believed to have enhanced transmissibility. For the South Africa and Brazil variants, there is evidence that mutations in spike protein permit it to escape from some vaccines and therapeutic monoclonal antibodies. On the basis of our extensive genome sequencing program involving 20,453 coronavirus disease 2019 patient samples collected from March 2020 to February 2021, we report identification of all six of these SARS-CoV-2 variants among Houston Methodist Hospital (Houston, TX) patients residing in the greater metropolitan area. Although these variants are currently at relatively low frequency (aggregate of 1.1%) in the population, they are geographically widespread. Houston is the first city in the United States in which active circulation of all six current variants of concern has been documented by genome sequencing. Finally, as vaccine deployment accelerates, increased genomic surveillance of SARS-CoV-2 is essential to understanding the presence, frequency, and medical impact of consequential variants and their patterns and trajectory of dissemination.

60 APPLIED LIFE SCIENCES↗

Hazard analysis for identifying common cause failures of digital safety systems using a redundancy-guided systems-theoretic approach

Replacing the existing aging analog instrumentation and control (I&C) systems with modern safety control and protection, digital technology offers one of the foremost means of performance improvements and cost reductions for the existing nuclear power plants (NPPs). However, the qualification of digital I&C systems remains a challenge, especially considering the issue of software common-cause failures (CCFs), which are difficult to address. With the application and upgrades of advanced digital I&C systems, software CCFs have become a potential threat to plant safety because most redundant designs use similar digital platforms or software in the operating and application systems. With complex designs of multilayer redundancy to meet the single-failure criterion, digital I&C safety systems (e.g., engineered safety-features actuation system [ESFAS]) are of a particular concern in the U.S. Nuclear Regulatory Commission (NRC) licensing procedures. Here, this paper applies a modularized approach to conduct redundancy-guided systems-theoretic hazard analysis for an advanced digital ESFAS with multilevel redundancy designs. Systematic methods and risk-informed tools are incorporated to address both hardware and software CCFs, which provide guidance to eliminate the causal factors of potential single points of failure in the design of digital safety systems in advanced plant designs.

42 ENGINEERING↗

Identifying limitations in screening high-throughput photocatalytic bimetallic nanoparticles with machine-learned hydrogen adsorptions

The Sabatier principle is of fundamental importance to computational catalyst discovery, saving researchers time and expense by predicting catalytic activity in silico at scale. However, as polycrystalline and nanoscale catalysts increasingly dominate industry, computational screening tools must be adapted to these uses. In this work, we demonstrate the effectiveness of computational adsorption energy screening in nanocatalysis by comparing a multisite adsorption energy prediction workflow against a large experimental dataset of hydrogen evolution activities over bimetallic nanoparticles. Comparing 16 million hydrogen adsorption energy predictions with the hydrogen evolution activity of 5300 experiments across 84 monometallic and bimetallic systems, we discover that favorable adsorption energies are a necessary condition for experimental activity, but other factors often determine trends in practice. Finally, about half of the bimetallic search space can be excluded from experimental screens using hydrogen adsorption predictions, but this method may become significantly more powerful when combined with other screening tools.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic analysis of the interactions between calcium ferrite and coal char for chemical looping gasification applications: Identifying reduction routes and modes of oxygen transfer

Chemical Looping Gasification (CLG) is an emerging technology that shows promise for efficient coal gasification by eliminating the need for energy intensive gas separations to achieve a non-nitrogen diluted syngas stream. Oxygen from oxygen carriers, such as CaFe 2 O 4 , are used for coal gasification in place of conventionally produced gaseous oxygen from cryogenic separation of air. These oxygen carriers are unique for their ability to selectively oxidize coal to form syngas and show limited reactivity with syngas components (H 2 , CO). To gain a deeper understanding of how these unique oxygen carriers perform and to offer a first attempt at the reaction modeling of solid mediated interactions of this nature, this study was carried out to determine the kinetic parameters associated with the selective oxidation of coal derived char (Wyodak and Illinois #6) with a metal ferrite, CaFe 2 O 4 . Using thermogravimetric analysis (TGA) coupled with mass spectrometry, the selective oxygen release of metal ferrite in the presence of char by proximal contact was examined. The application of combinatory model fitting approaches was used to describe controlling resistances during oxygen release. A combination of the modified shrinking core model (SCM) with planar oxygen ion diffusion control and reaction order based models was used for kinetic parameter determination. CaFe 2 O 4 particle size plays a major role in the prevailing mode of oxygen release. Particle sizes on the order of 40–50 μm tend to favor first order kinetically controlled regimes independent of geometric and diffusion controls. The probability for oxygen ion diffusion controlling regimes increased when the particle size range of the oxygen carrier was increased up to 350 μm. Char type also impacted the prevalence of the controlling regime. Higher ranked chars react in a slower manner, limiting the gradient for oxygen ion release from the oxygen carrier. Activation energies determined for this process range from 120–200kJ/mol and oxygen ion diffusion coefficients are on the order of 10-8 cm 2 /s. It is suggested that oxygen ion movement is regulated by lattice diffusion out of partially reduced phases (Ca 2 Fe 2 O 5 ) and through reduced outer layers composed of CaO and Fe. The controlled movement of oxygen ions influences the rate of carbon oxidation in the char and therefore the selectivity towards partial oxidation products, which are desirable in CLG applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identifying degradation mechanisms in lithium-ion batteries with coating defects at the cathode

Understanding the effect of electrode manufacturing defects on lithium-ion battery (LIB) performance is key to reducing the scrap rate and cost during cell manufacturing. In this regard, it is necessary to quantify the impact of various defects that are generated during the electrode coating process. To this end, we have tested large-format 0.5 Ah LiNi 0.5 Mn 0.3 Co 0.2 O 2 /graphite pouch cells with defects intentionally introduced into the cathode coating. Different types of coating defects were tested including agglomerates, pinholes, and non-uniform coating. Electrodes with larger non-coated surface had greater capacity fade than baseline electrodes, while pinholes and agglomerates did not affect performance adversely. Furthermore, post cycle analysis of electrodes showed that the anode facing the defective region in the cathode was clearly impacted by the defect. Further characterization using Raman spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction provided evidence for a proposed mechanism for material degradation related to the most detrimental type of coating defect.

25 ENERGY STORAGE↗

Identifying surface structural changes in a newly-developed Ga-based alloy with melting temperature below 10 °C

Surface oxidation, as one of fundamental chemical reactions in metals, greatly affects their properties. Herein, we develop a new quaternary GaInSnZn liquid metal with the melting temperature of 9.7 °C, which is the lowest among all reported Ga-based liquid metals. With high-resolution transmission electron microscopy, we directly observed the oxide layer formed on the surface of the liquid metal. The initially formed oxide layer is revealed to be amorphous and very sensitive to electron beam. Prolonged irradiation results in its structural change from amorphous to crystalline phases. The present finding refreshes the basic understanding of surface oxidization of liquid metals and opens up the possibility of tuning surface structures and morphologies by using electron beam irradiation.

36 MATERIALS SCIENCE↗