Search NASA⌕ Search

SEARCH · Search NASA

Results for “PARTICLE MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Modeling and Analysis of FCM UN TRISO Fuel Using the PARFUME Code

The PARFUME (PARticle FUel ModEl) modeling code was used to assess the overall fuel performance of uranium nitride (UN) tri-structural isotropic (TRISO) ceramic fuel in the frame of the design and development of Fully Ceramic Matrix (FCM) fuel. A specific modeling of a TRISO particle with UN kernel was developed with PARFUME, and its behavior was assessed in irradiation conditions typical of a Light Water Reactor (LWR). The calculations were used to access the dimensional changes of the fuel particle layers and kernel, including the formation of an internal gap. The survivability of the UN TRISO particle was estimated depending on the strain behavior of the constituent materials at high fast fluence and burn-up. For nominal cases, internal gas pressure and representative thermal profiles across the kernel and layers were determined along with stress levels in the pyrolytic carbon (PyC) and silicon carbide (SiC) layers. These parameters were then used to evaluate fuel particle failure probabilities. Results of the study show that the survivability of UN TRISO fuel under LWR irradiation conditions might only be guaranteed if the kernel and PyC swelling rates are limited at high fast fluence and burn-up. These material properties are unknown at the irradiation levels expected to be reached by UN TRISO fuel in LWRs. Therefore, more effort is needed to determine them and positively conclude on the applicability of FCM fuel to LWRs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effective contact interactions in a stabilized RS1 brane world model

We consider the effective Lagrangian due to the exchange of heavy Kaluza-Klein (KK) tensor graviton and scalar radion states in a stabilized Randall-Sundrum model (RS1) and compute explicitly the corresponding effective coupling constants. The Drell-Yan lepton pair production at the Tevatron and the LHC is analyzed in two situations, when the first KK resonance is too heavy to be directly detected at the colliders, and when the first KK resonance is visible but other states are still too heavy. In the first case the effective Lagrangian reduces to a contact interaction of Standard Model (SM) particles, whereas in the second case it includes a coupling of SM particles to the first KK mode and a contact interaction due to the exchange of all the heavier modes. It is shown that in both cases the contribution from the invisible KK tower leads to a modification of final particles distributions. In particular, for the second case a nontrivial interference between the first KK mode and the rest KK tower takes place. Expected 95% C.L. limits for model parameters for the Tevatron and the LHC are given. The numerical results are obtained by means of the CompHEP code, in which all new effective interactions are implemented providing a tool for simulation of corresponding events and a more detailed analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An approach to assess the Particulate Matter exposure for the population living around a cement plant: modelling indoor air and particle deposition in the respiratory tract

In this paper we studied the exposure to three size fractions of outdoor particulate matter (PM{sub 10}, PM{sub 2.5}, and PM{sub 1}) collected in an area influenced by a cement plant. For that purpose, three groups of population were evaluated (children, adults and retired) in two seasons (summer and winter). Outdoor measured PM concentrations, as well as physiological parameters and activity patterns of the three groups of population were used as input data in two different models. The first one was an indoor air quality model, used to elucidate indoor PM concentrations in different microenvironments. The second one was a dosimetry model, used to evaluate the internal exposure and the distribution of the different PM fractions in the respiratory tract. Results from the indoor air quality model showed that special attention must be paid to the finest particles, since they penetrate indoors in a greater degree. Highest pulmonary doses for the three PM sizes were reported for retired people, being this a result of the high amount of time in outdoor environments exercising lightly. For children, the exposure was mainly influenced by the time they also spend outdoors, but in this case due to heavy intensity activities. It was noticed that deposition of fine particles was more significant in the pulmonary regions of children and retired people in comparison with adults, which has implications in the expected adverse health effects for those vulnerable groups of population. - Highlights: • PM deposition in the respiratory tract was evaluated for three population groups. • Activity patterns and different microenvironments were used in our calculation. • Outdoor activities are the main contributors to PM deposited mass. • Children experienced the highest deposition dose in the pulmonary region. • Retired registered the highest deposited mass in the respiratory tract as a whole.

54 ENVIRONMENTAL SCIENCES↗

Lindblad equations for strongly coupled populations and coherences in photosynthetic complexes

Recent experimental observations of time-resolved multidimensional signals in the light-harvesting antennae Fenna-Mathews-Olson [G. S. Engel et al., Nature (London) 446, 782 (2007)] show large oscillations of exciton populations coupled to the long-lived coherences. These effects may not be reproduced by the standard Redfield theory which assumes weak coupling to a bath. A more general relaxation superoperator which holds for all system-bath coupling parameter regimes is constructed by taking into account the statistics (covariances) of Lindblad equation parameters. Simulations for a model dimer reproduce all observed strong coupling effects.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

3D Finite Element Analysis of Particle-Reinforced Aluminum

Deformation in particle-reinforced aluminum has been simulated using three distinct types of finite element model: a three-dimensional repeating unit cell, a three-dimensional multi-particle model, and two-dimensional multi-particle models. The repeating unit cell model represents a fictitious periodic cubic array of particles. The 3D multi-particle (3D-MP) model represents randomly placed and oriented particles. The 2D generalized plane strain multi-particle models were obtained from planar sections through the 3D-MP model. These models were used to study the tensile macroscopic stress-strain response and the associated stress and strain distributions in an elastoplastic matrix. The results indicate that the 2D model having a particle area fraction equal to the particle representative volume fraction of the 3D models predicted the same macroscopic stress-strain response as the 3D models. However, there are fluctuations in the particle area fraction in a representative volume element. As expected, predictions from 2D models having different particle area fractions do not agree with predictions from 3D models. More importantly, it was found that the microscopic stress and strain distributions from the 2D models do not agree with those from the 3D-MP model. Specifically, the plastic strain distribution predicted by the 2D model is banded along lines inclined at 45 deg from the loading axis while the 3D model prediction is not. Additionally, the triaxial stress and maximum principal stress distributions predicted by 2D and 3D models do not agree. Thus, it appears necessary to use a multi-particle 3D model to accurately predict material responses that depend on local effects, such as strain-to-failure, fracture toughness, and fatigue life.

Shen, H.↗

Quasiconformality and mass

We identify universal quasiconformal (walking) behavior in non-Abelian gauge field theories based on the mass-dependent all-order {beta} function introduced in [D. D. Dietrich, Phys. Rev. D 80, 065032 (2009)]. We find different types of walking behavior in the presence of (partially) massive species. We employ our findings to the construction of candidate theories for dynamical electroweak symmetry breaking by walking technicolor.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of compressional waves on the response of quartz crystal microbalance in contact with silicone oil droplets

Droplet quartz crystal microbalance has been demonstrated to be a promising tool for accessing material properties of fluids as well as the diverse solid-fluid interface phenomena. However, a microliter droplet localized on the surface of the electrodes of finite lateral size may cause a nonuniform distribution of the plane velocity, which may lead to surface normal fluid flow and generate the compressional waves above the crystal surface. In the present article, we report systematical investigation on both resonance frequency and dissipation measurements with reference to the small droplets of silicone oils spreading on the surface of the quartz crystal microbalance. Significant cyclical variations in the resonant frequency and resistance of the crystal have been observed as the characteristic sizes of the silicone oil droplets are close to specific values known to favor compressional wave generation. The experimental results have been compared with the theoretical values predicted by the finite element computation associated with a simple hydrodynamic model. Good agreement between theory and experiment has been obtained. The finding indicates that the small droplets on the crystal surface can act as resonant cavities for the compressional wave generation and that the greatest propensity to exhibit periodical resonance behavior in the frequency and dissipation measurements is at droplet height of lambda{sub c}/2 above the crystal surface.

36 MATERIALS SCIENCE↗

Efficient Failure Probability Calculations and Modeling Interface Debonding in TRISO Particles with BISON

This document constitutes completion of the NEAMS milestone, which is titled Demonstrate efficiency improvements in TRISO failure probability calculations and the effect of debonding on fission product transport in TRISO fuel particles in Bison . In this report we present the development of the following: (1) the anisotropic elasticity model of pyrolytic carbon and extended material models using the local coordinate system for aspherical particle geometry; (2) a capability of modeling interface debonding in TRISO particles; and (3) an efficient high-fidelity approach to calculate the failure probability of TRISO particles. Benchmark problems and AGR-2 tests are used to verify the models and demonstrate these new capabilities.

36 MATERIALS SCIENCE↗

Acoustic Solitary Waves and Sagdeev Potential Triple Roots

Both KdV theory and the standard pseudopotential theory require that solitons and double layers be explicitly super-acoustic, with the pseudopotential {psi}({phi},M) having a maximum at the origin. Recent studies of a variety of different three-component plasmas have shown that they may support finite amplitude solitons at the true acoustic speed of the plasma configuration, M{sub s}. These are associated with triple roots of the Sagdeev potential, and the usual soliton condition is replaced by {psi}''(0,M){<=}0. Sagdeev potentials for speeds marginally greater than M{sub s} then represent solitons of both polarities, one whose amplitude vanishes at M{sub s}(KdV-like), while the other is necessarily finite at M{sub s}('nonKdV-like'). Such coexistence regions have been observed to be linked to a critical plasma compositional parameter value for which {psi}'''(0,M{sub s}) = 0.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Collective Dynamics of Strongly Coupled Dusty Plasmas

Some selected highlights of theoretical and experimental research at IPR in the area of strongly coupled plasmas are presented. Theoretical analysis using the generalized hydrodynamics model have found interesting modifications in the linear propagation characteristics of dust acoustic waves (DAWs) including additional dispersive contributions and regions where {partial_derivative}{omega}/{partial_derivative}k<0. The analysis also predicted the existence of transverse shear waves in the liquid state of the dust component which were subsequently detected for the first time in laboratory experiments done at the Institute. Interesting experimental results in the strongly coupled regime were also obtained for DAWs including the first ever observations of solitary pulse propagation in such a medium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Grammatical Universe and the Laws of Thermodynamics and Quantum Entanglement

The universal nilpotent computational rewrite system (UNCRS) is shown to formalize an irreversible process of evolution in conformity with the First, Second and Third Laws of Thermodynamics, in terms of a single algebraic creation operator (ikE+ip+jm) which delivers the whole quantum mechanical language apparatus, where k, i, j are quaternions units and E, p, m are energy, momentum and rest mass. This nilpotent evolution describes 'a dynamic zero totality universe' in terms of its fermion states (each of which, by Pauli exclusion, is unique and nonzero), where, together with their boson interactions, these define physics at the fundamental level. (The UNCRS implies that the inseparability of objects and fields in the quantum universe is based on the fact that the only valid mathematical representations are all automorphisms of the universe itself, and that this is the mathematical meaning of quantum entanglement. It thus appears that the nilpotent fermion states are in fact what is called the splitting field in Quantum Mechanics of the Galois group which leads to the roots of the corresponding algebraic equation, and concerns in this case the alternating group of even permutations which are themselves automorphisms). In the nilpotent evolutionary process: (i) the Quantum Carnot Engine (QCE) extended model of thermodynamic irreversibility, consisting of a single heat bath of an ensemble of Standard Model elementary particles, retains a small amount of quantum coherence / entanglement, so as to constitute new emergent fermion states of matter, and (ii) the metric (E{sup 2}-p{sup 2}m{sup 2}) = 0 ensures the First Law of the conservation of energy operates at each nilpotent stage, so that (iii) prior to each creation (and implied corresponding annihilation / conserve operation), E and m can be postulated to constitute dark energy and matter respectively. It says that the natural language form of the rewrite grammar of the evolution consists of the well known precepts of the Laws of Thermodynamics, formalized by the UNCRS regress, so as to become (as UNCRS rewrites already published at CASYS), firstly the Quantum Laws of Physics in the form of the generalized Dirac equation and later at higher stages of QCE ensemble complexity, the Laws of Life in the form of Nature's (DNA / RNA genetic) Code and then subsequently those of Intelligence and Consciousness (Nature's Rules).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Neural Networks for Modeling and Control of Particle Accelerators

Particle accelerators are host to myriad nonlinear and complex physical phenomena. They often involve a multitude of interacting systems, are subject to tight performance demands, and should be able to run for extended periods of time with minimal interruptions. Often times, traditional control techniques cannot fully meet these requirements. One promising avenue is to introduce machine learning and sophisticated control techniques inspired by artificial intelligence, particularly in light of recent theoretical and practical advances in these fields. Within machine learning and artificial intelligence, neural networks are particularly well-suited to modeling, control, and diagnostic analysis of complex, nonlinear, and time-varying systems, as well as systems with large parameter spaces. Consequently, the use of neural network-based modeling and control techniques could be of significant benefit to particle accelerators. For the same reasons, particle accelerators are also ideal test-beds for these techniques. Many early attempts to apply neural networks to particle accelerators yielded mixed results due to the relative immaturity of the technology for such tasks. The purpose of this paper is to re-introduce neural networks to the particle accelerator community and report on some work in neural network control that is being conducted as part of a dedicated collaboration between Fermilab and Colorado State University (CSU). We describe some of the challenges of particle accelerator control, highlight recent advances in neural network techniques, discuss some promising avenues for incorporating neural networks into particle accelerator control systems, and describe a neural network-based control system that is being developed for resonance control of an RF electron gun at the Fermilab Accelerator Science and Technology (FAST) facility, including initial experimental results from a benchmark controller.

43 PARTICLE ACCELERATORS↗

Photon spectra from quark generation by WIMPs

If the present dark matter (DM) in the Universe annihilates into Standard Model (SM) particles, it must contribute to the gamma ray fluxes that are detected on the Earth. The magnitude of such contribution depends on the particular DM candidate, but certain features of these spectra may be analyzed in a model-independent fashion. In this work we provide the fitting formula valid for the simulated photon spectra from WIMP annihilation into light quark-anti quark (qq-bar) channels in a wide range of WIMP masses. We illustrate our results for the cc-bar channel.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

String in Horava-Lifshitz gravity

We generalize recent analysis of the dynamics of point particle in Horava-Lifshitz background to the case of string probe when we replace the Hamiltonian constraint of the Polyakov string with the constraint that breaks Lorentz invariance of target space-time. Then, we find corresponding Lagrangian and argue that the world sheet theory is invariant under foliation-preserving diffeomorphism. Finally, we discuss the Hamiltonian dynamics and show that this is well defined on condition that the world sheet lapse function obeys the projectability condition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Point-particle drag, lift, and torque closure models using machine learning: Hierarchical approach and interpretability

Developing deterministic neighborhood-informed point-particle closure models using machine learning has garnered interest recently from the dispersed multiphase flow community. The robustness of neural models for this complex multibody problem is hindered by the availability of particle-resolved data. Here, the present work addresses this unavoidable limitation of data paucity by implementing two strategies: (1) by using a rotation and reflection equivariant neural network and (2) by pursuing a physics-based hierarchical machine learning approach. The resulting machine-learned models are observed to achieve a maximum accuracy of 85% and 96% in the prediction of neighbor-induced force and torque fluctuations, respectively, for a wide range of Reynolds number and volume fraction conditions considered. Furthermore, we pursue force and torque network architectures that provide universal prediction spanning a wide range of Reynolds number (0.25 ≤ Re ≤250) and particle volume fraction (0 ≤ φ ≤0.4). The hierarchical nature of the approach enables improved prediction of quantities such as streamwise torque, by going beyond binary interactions to include trinary interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Particle production within the quark meson coupling model

Quark-meson coupling (QMC) models can be successfully applied to the description of compact star properties in nuclear astrophysics as well as to nuclear matter. In the regime of hot hadronic matter very few calculations exist using the QMC model, in particular when applied to particle yields in heavy ion collisions. In the present work, we identify the free energy of the bag with the effective mass of the baryons and we calculate the particle production yields on a Au+Au collision at the BNL Relativistic Heavy Ion Collider (RHIC) with the QMC model and compare them with results obtained previously with other relativistic models. A smaller temperature for the fireball, T=132 MeV, is obtained because of the smaller effective baryon masses predicted by QMC. QMC was also applied to the description of particle yields at the CERN Super Proton Synchrotron (SPS) in Pb+Pb collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗