Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Transport properties near the metal to insulator transition in samarium substituted (Bi,Pb)-2212 system

The electrical transport properties of insulating and superconducting samples of Bi{sub 1.7}Pb{sub 0.4}Sr{sub 2-x}Sm{sub x}Ca{sub 1.1}Cu{sub 2.1}O{sub 8+d}elta system is studied across the metal to insulator transition (MIT) region by varying the x values from 0.5 to 1.0 in steps of 0.1. X-ray diffraction analysis, scanning electron microscopy, energy dispersive x-ray analysis (EDAX), and electrical resistivity measurements have been employed for the characterization of all samples. The x-ray and EDAX analyses indicate that samarium (Sm) atoms are incorporated into the crystalline structure of Bi{sub 1.7}Pb{sub 0.4}Sr{sub 2}Ca{sub 1}Cu{sub 2}O{sub 8+d}elta[(Bi,Pb)-2212]. Samples with x<=0.6 undergo superconducting transitions while those with 0.7<=x<=1.0 exhibit semiconducting behavior. The MIT is observed at 0.6<x<=0.7 with a suppression in superconductivity. The results show that with increase in temperature, the transport mechanism of the semiconducting samples transits from two dimensional variable range hopping to thermally activated conduction. A scaling model is presented for the MIT and the results are interpreted on the basis of hole filling and disorder due to the substitution of Sm at the strontium site of (Bi,Pb)-2212 system.

36 MATERIALS SCIENCE↗

Martensitic Transformation and Magnetic Properties of the CuAl, CuAlMn, and CuAlMnZn Alloys

In the present work, the effect of alloying elements on the phase transformation which are formed by cooling effect in CuAl, CuAlMn, and CuAlMnZn (wt%) alloys are investigated using scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM) characterization techniques. From SEM observations, the martensite formation with different morphologies is observed in these alloys. But the results of the scanning electron microscope investigations presented in this work have not formed the precipitates in the CuAl alloy with Mn or Zn additions. We found that magnetic saturation and coercivity values decreased with the addition of Mn and Zn elements to the CuAl alloy. The findings confirmed the variation in magnetic properties, which occurred in the result of adding different alloying elements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of Cu(In,Ga,Al)Se{sub 2} thin films fabricated by magnetron sputtering

Cu(In,Ga,Al)Se{sub 2} (CIGAS) thin films were studied as an alternative absorber layer material to Cu(In{sub x}Ga{sub 1−x})Se{sub 2}. CIGAS thin films with varying Al content were prepared by magnetron sputtering on Si(100) and soda-lime glass substrates at 350 °C, followed by postdeposition annealing at 520 °C for 5 h in vacuum. The film composition was measured by an electron probe microanalyzer while the elemental depth profiles were determined by secondary ion mass spectrometry. X-ray diffraction studies indicated that CIGAS films are single phase with chalcopyrite structure and that the (112) peak clearly shifts to higher 2θ values with increasing Al content. Scanning electron microscopy images revealed dense and well-defined grains, as well as sharp CIGAS/Si(100) interfaces for all films. Atomic force microscopy analysis indicated that the roughness of CIGAS films decreases with increasing Al content. The bandgap of CIGAS films was determined from the optical transmittance and reflectance spectra and was found to increase as Al content increased.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NanoXCT - A High-Resolution Technique For TSV Characterization

Lab-based Transmission X-ray Microscopy and X-ray Computed Tomography (TXM/XCT) with sub-100 nm resolution are evaluated for their application in process and quality control in microelectronics, particularly for TSV characterization. These are the techniques of choice to localize defects in copper TSVs for 3D IC integration. In contrast to other techniques like Focused Ion Beam cross-sectioning and subsequent Scanning Electron Microscopy imaging, the region of interest, i.e. the TSV, is imaged nondestructively and three dimensionally. For flat samples like thinned wafers, the tilted rotational axis tomography is proposed instead of the limited angle tomography since the better in-plane resolution increases the quality of the resulting tomogram. Yield- and reliability-limiting processes in 3D TSV technology like voids and incomplete filled vias can be made visible for an array of adjacent TSVs during one measurement without affecting the TSV.

36 MATERIALS SCIENCE↗

Experimental and Numerical Investigations of Cyclic Plastic Deformation of Al-Mg Alloy

In this work, low-cycle fatigue (LCF) tests are performed on as-received and solution-treated Al-Mg alloy (AA 5754). Solution heat treatment of the as-received alloy is performed at 530 °C for 2 h and then quenched in water at room temperature. The low-cycle fatigue response of the as-received and solution-treated alloy is evaluated at five different strain amplitudes from 0.2 to 0.6%. The strain rate of 0.5 × 10{sup −3} s{sup −1} is kept constant in all the LCF tests. The LCF behavior of AA 5754 is modeled by finite element method (FEM) using Chaboche kinematic hardening cyclic plasticity model. Hardening behavior or fatigue life of as-received and solution-treated alloy is successfully simulated using this model. The results obtained by FEM simulations are compared with those obtained by LCF experiments. Microstructural studies are also performed for as-received and solution-treated alloy. The fracture surfaces obtained from LCF tests are analyzed by scanning electron microscopy.

36 MATERIALS SCIENCE↗

Mechanical and morphological properties of kenaf powder filled natural rubber latex foam

This research is carried out by incorporate kenaf powder with natural rubber latex (NRL) compound and is foamed to make natural rubber latex foam (NRLF) by using a well known technique called Dunlop method. Different loading of kenaf powder was added to NRL compound and was foamed to make NRLF. The tensile properties, and morphology of kenaf filled NRLF was studied. Increase in kenaf loading reduced the tensile strength and elongation at break and of a compound. Modulus at 100% elongation of the compound increased with increased in filler loading. The morphological and micro structural characterization has been performed by using scanning electron microscopy (SEM)

36 MATERIALS SCIENCE↗

Investigations on Ni-Co-Mn-Sn thin films: Effect of substrate temperature and Ar gas pressure on the martensitic transformations and exchange bias properties

We report the effect of substrate temperature (T{sub S}) and Ar gas pressure (P{sub D}) on the martensitic transformations, magnetic and exchange bias (EB) properties in Heusler type Ni-Co-Mn-Sn epitaxial thin films. Martensitic transformation temperatures and EB fields at 5 K were found to increase with increasing T{sub S}. The observed maximum EB value of 320 Oe after field cooling in the film deposited at 650 {sup ∘}C is high among the values reported for Ni-Mn-Sn thin films which is attributed to the coexistence of ferromagnetic (FM) and antiferromagnetic (AF) phases in the martensitic state. In the case of P{sub D} variation, with increase in P{sub D}, martensitic transformation temperatures were increased and a sharp transformation was observed in the film deposited at 0.06 mbar. Magnetization values at 5 K were higher for increasing P{sub D}. These observations are attributed to the compositional shift. EB effect is also present in these films. Microstructural features observed using atomic force microscopy (AFM) shows a fine twinning and reduced precipitation with increase in P{sub D}, which is also confirmed from the scanning electron microscopy (SEM) images. EB effects in both series were confirmed from the training effect. Target ageing effect has been observed in the films deposited before and after ninety days of time interval. This has been confirmed both on substrate temperature and Ar gas pressure variations.

36 MATERIALS SCIENCE↗

Ferromagnetic-to-Paramagnetic Phase Transition of MnAs Studied by Calorimetry and Magnetic Measurements

Manganese monoarsenide samples have been prepared by the sealed-ampule technique and characterized by X-ray diffraction, differential thermal analysis, and scanning electron microscopy. The hexagonal- to-orthorhombic phase transition of MnAs has been studied using differential scanning calorimetry (DSC) and magnetic measurements. The enthalpy and temperature range of the transition have been determined to be ΔH =–5.6 J/g and 312.5–319 K, respectively. The enthalpy and temperature range of the transition are influenced by the quality of the samples. The samples containing inclusions of the metastable, orthorhombic phase have a lower enthalpy and broader temperature range of the magnetostructural transformation of manganese monoarsenide. It has been demonstrated that DSC is an effective tool for assessing the quality of MnAs samples. Temperature dependences of specific magnetization and magnetic permeability for MnAs lend support to the DSC results. From these data, the Curie temperature of MnAs has been determined to be 40°C, in good agreement with previously reported data.

36 MATERIALS SCIENCE↗

Influence of surface pattern on the biological properties of Ti grade 2

Highlights: • Laser modification causes changes in chemical composition of the surface. • Laser treatment creates roughness in a range from nano- to micrometers. • The surface modification presented results in a multimodal topography. • A hierarchical topography promotes protein adsorption. - Abstract: This paper presents a detailed characterization of Ti surface geometries as produced by non-contact laser functionalization and its impact on the process of protein adsorption. The proposed surface modification is designed for the local treatment of implantable devices with original roughness. In this work, titanium plates were initially modified by the two most common mechano-chemical treatments, shot peening and acid etching. The material under study was next functionalized DLIL (Direct Laser Interference Lithography) in order to obtained two different surface patterns: grooves and islands. The modified surfaces were characterized in terms of their shape, roughness, wettability, surface energy and chemical composition. For this purpose, the following methods were used: scanning electron microscopy, optical profilometry, atomic force microscopy, contact angle measurements, and X-ray photoelectron spectroscopy. Protein adsorption tests were conducted to consider the potential of the proposed methodology in biomedical applications and to compare the influence of the two different surface patterns on the initial state of ossointegration. To this end, XPS and FTIR studies were conducted. The systematic analysis presented will be useful when selecting an appropriate surface geometry for the local surface functionalization of implantable devices.

36 MATERIALS SCIENCE↗

Effect of aluminum substitution on structural and electromagnetic properties of nanocrystalline MgCuMn ferrites

The effect of substitution of nonmagnetic Al{sup 3+} ions on the structural and electromagnetic properties were studied in nanocrystalline ferrite series of Mg{sub 0.8}Cu{sub 0.2}Al{sub x}Fe{sub 1.95-x}Mn{sub 0.05}O{sub 4} where x varies 0-0.4 in steps of 0.1. This series was synthesized by using microwave hydrothermal method. The nanocrystalline ferrite phase was observed at temperature 150°C/40 min. Synthesized powders were characterized using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The synthesized powders were densified using microwave sintering method at 950°C/40 min. The sintered samples were characterized using XRD. Surface morphology was observed by using field effective scanning electron microscopy (FESEM). The electrical and magnetic properties were measured at room temperature. These results led us to interfere that the values of d.c resistivity increases and dielectric constant, initial permeability, saturation magnetization and Curie temperature were observed to be decreased with the substitution of Al{sup 3+} ions with those of Fe{sup 3+}. The low dielectric and magnetic losses and low magnetization exhibited by aluminum substituted MgCuMn ferrites makes them find applications in microwave devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Al/CuO reactive multilayer films additives on exploding foil initiator

An investigation on the influence of Al/CuO reactive multilayer films (RMFs) additives on exploding foil initiator was performed in this paper. Cu film and Cu/Al/CuO RMFs were produced by using standard microsystem technology and RF magnetron sputtering technology, respectively. Scanning electron microscopy characterization revealed the distinct layer structure of the as-deposited Al/CuO RMFs. Differential scanning calorimetry was employed to ascertain the amount of heat released in the thermite reaction between Al films and CuO films, which was found to be 2024 J/g. Electrical explosion tests showed that 600 V was the most matching voltage for our set of apparatus. The explosion process of two types of films was observed by high speed camera and revealed that compared with Cu film, an extra distinct combustion phenomenon was detected with large numbers of product particles fiercely ejected to a distance of about six millimeters for Cu/Al/CuO RMFs. By using the atomic emission spectroscopy double line technique, the reaction temperature was determined to be about 6000-7000 K and 8000-9000 K for Cu film and Cu/Al/CuO RMFs, respectively. The piezoelectricity of polyvinylidene fluoride film was employed to measure the average velocity of the slapper accelerated by the explosion of the films. The average velocities of the slappers were calculated to be 381 m/s and 326 m/s for Cu film and Cu/Al/CuO RMFs, respectively, and some probable reasons were discussed with a few suggestions put forward for further work.

36 MATERIALS SCIENCE↗

Probing the thermal decomposition of plutonium (III) oxalate with IR and Raman spectroscopy, X-ray diffraction, and electron microscopy

The thermal decomposition of Pu(III) oxalate was analyzed by Raman microspectroscopy, infrared spectroscopy, scanning electron microscopy, and powder X-ray diffraction. These data show that crystalline Pu 2 (C 2 O 4 ) 3 •9H 2 O progressively loses water and oxalate ligands as it is heated, which leads to a decrease in long-range lattice ordering, though minimal changes are observed in gross crystalline morphology. The onset of PuO 2 formation was observed between 200 - 250 °C. Thermal decomposition of oxalate ligands leads to the formation of CO 2 and plutonium oxalate-carbonate moieties, which had not been observed in previously published thermogravimetric measurements of Pu(III) oxalate. Formation of plutonium oxalate-carbonate moieties is believed to be associated with a change in the plutonium oxidation state from 3+ to 4+, which occurs prior to PuO 2 formation. The data provided herein demonstrate the rich spectroscopic nature of a rather underexplored, and technologically relevant, plutonium system. Ideally these results will further future investigations into the Pu(III) oxalate system both experimentally and computationally.

36 MATERIALS SCIENCE↗

Calcium-doped ceria/titanate tabular functional nanocomposite by layer-by-layer coating method

Ca-doped ceria (CDC)/tabular titanate (K{sub 0.8}Li{sub 0.27}Ti{sub 1.73}O{sub 4}, TT) UV-shielding functional nanocomposite with fairly uniform CDC coating layers was prepared through a polyelectrolyte-associated layer-by-layer (LbL) coating method. TT with lepidocrocite-like layered structure was used as the substrate, poly (diallyldimethylammonium chloride) (PDDA) was used as a coupling agent, CDC nanoparticles were used as the main UV-shielding component. CDC/TT nanocomposites with various coating layers of CDC were obtained through a multistep coating process. The phases were studied by X-ray diffraction. The morphology and coating quality were studied by scanning electron microscopy and element mapping of energy dispersive X-ray analysis. The oxidation catalytic activity, UV-shielding ability and using comfort were characterized by Rancimat test, UV-vis spectra and dynamic friction test, respectively. CDC/TT nanocomposites with low oxidation catalytic activity, high UV-shielding ability and good using comfort were finally obtained. - Graphical abstract: Through the control of surface charge of particles calcium-doped ceria/titanate composites with low oxidation catalytic activity, higher UV-shielding ability and excellent comfort was obtained by a facile layer-by-layer coating method.

36 MATERIALS SCIENCE↗

Structural tuning of nanogaps using electromigration induced by field emission current with bipolar biasing

We report a new method for fabrication of Ni nanogaps based on electromigration induced by a field emission current. This method is called “activation” and is demonstrated here using a current source with alternately reversing polarities. The activation procedure with alternating current bias, in which the current source polarity alternates between positive and negative bias conditions, is performed with planar Ni nanogaps defined on SiO{sub 2}/Si substrates at room temperature. During negative biasing, a Fowler-Nordheim field emission current flows from the source (cathode) to the drain (anode) electrode. The Ni atoms at the tip of the drain electrode are thus activated and then migrate across the gap from the drain to the source electrode. In contrast, in the positive bias case, the field emission current moves the activated atoms from the source to the drain electrode. These two procedures are repeated until the tunnel resistance of the nanogaps is successively reduced from 100 TΩ to 48 kΩ. Scanning electron microscopy and atomic force microscopy studies showed that the gap separation narrowed from approximately 95 nm to less than 10 nm because of the Ni atoms that accumulated at the tips of both the source and drain electrodes. These results show that the alternately biased activation process, which is a newly proposed atom transfer technique, can successfully control the tunnel resistance of the Ni nanogaps and is a suitable method for formation of ultrasmall nanogap structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel nanocomposites based on polythiophene and zirconium dioxide

Highlights: • Crystallinity of polythiophene decreased with doping process. • Zirconium dioxide changed the surface morphology of PT significantly. • Doping process increased the glass transition temperature of polythiophene. • Charge transport mechanism of all samples is consistent with CBH model. - Abstract: This paper reports charge transport mechanism of polythiophene (PT) and its nanocomposites having various weight of zirconium dioxide (ZrO{sub 2}). Fourier transform infrared (FT-IR) spectral studies showed that the Zr ions mostly affected the C−S bond of the polythiophene. X-ray diffraction (XRD) patterns indicated that ZrO{sub 2} powder was a mixture of monoclinic (64.62%) and tetragonal (35.38%) phase. XRD measurements revealed that crystallinity of PT decreased with increasing doping level. Significant morphological differences were observed in scanning electron microscopy (SEM) images of PT depending on the doping process. Thermal analysis carried out by differential scanning calorimetry (DSC) indicated that the doping processes increased glass transition temperature of PT. The alternating current (ac) conductivity mechanism analysis by universal power law indicated that charge transport mechanism of both PT and PT/ZrO{sub 2} nanocomposites was consistent with correlated barrier hopping (CBH) model. The doping process and frequency affected the hopping distance between the sites.

36 MATERIALS SCIENCE↗

Synthesis and anion exchange properties of a Zn/Ni double hydroxide salt with a guarinoite structure

In this study, the first route to synthesize a compound with the guarinoite structure (Zn,Co,Ni){sub 6}(SO{sub 4})(OH,Cl){sub 10}.5H{sub 2}O is reported. Zn/Ni guarinoite is obtained from the reaction of NiSO{sub 4}.7H{sub 2}O with solid ZnO in aqueous solution. The resulting green Zn/Ni guarinoite ((Zn{sub 3.52}Ni{sub 1.63})(SO{sub 4}){sub 1.33}(OH{sub 7.64}).4.67H{sub 2}O) was characterized by X-ray diffraction, infrared spectrometry, UV-Visible spectrometry and thermal analysis. It is shown that its structure is similar to the one described for the layered Zn sulfate hydroxide hydrate, i.e. brucite layers with 1/4 empty octahedra presenting tetrahedrally coordinated divalent atoms above and below the empty octahedra. Ni atoms are located in the octahedra and zinc atoms in tetrahedra and octahedra. In this structure the exchangeable anions are located at the apex of tetrahedra. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations show that the Zn/Ni guarinoite is composed of aggregates of hexagonal plates of several hundreds of nanometers. Due to its interest for industrial or environmental applications, the exchange of sulfate groups by carbonates has been investigated. Results show a limited exchange and a higher affinity of the Zn/Ni guarinoite for sulfates compared to carbonates. - Graphical abstract: SEM micrograph (secondary electrons) of the synthesized Zn/Ni guarinoite showing that aggregates are composed of small plate-like particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication and characterization of metal-semiconductor-metal nanorod using template synthesis

The authors attempted to fabricate and characterize one dimensional metal-semiconductor-metal (MSM) nanorod using a template. Cadmium selenide (CdSe) and polypyrrole (Ppy) were chosen as n-type and p-type semiconductor materials, respectively, whereas Au was chosen as a metal electrode. The fabrication of the nanorod was achieved by ''template synthesis'' method using polycarbonate membrane. The structure of the fabricated nanorod was analyzed using scanning electron microscopy and energy dispersive spectroscopy. In addition, the electrical properties of MSM nanorods were characterized using scanning probe microscopy (Seiko Instruments, SPA 300 HV) by probing with a conductive cantilever. I-V characteristics as a function of the temperature give the activation energy, as well as the barrier height of a metal-semiconductor contact, which is useful to understand the conduction mechanism of MSM nanorods.

36 MATERIALS SCIENCE↗

Chemical Properties of Carbon Nanotubes Prepared Using Camphoric Carbon by Thermal-CVD

Chemical properties and surface study on the influence of starting carbon materials by using thermal chemical vapor deposition (Thermal-CVD) to produced carbon nanotubes (CNTs) is investigated. The CNTs derived from camphor were synthesized as the precursor material due to low sublimation temperature. The major parameters are also evaluated in order to obtain high-yield and high-quality CNTs. The prepared CNTs are examined using field emission scanning electron microscopy (FESEM) to determine the microstructure of nanocarbons. The FESEM investigation of the CNTs formed on the support catalysts provides evidence that camphor is suitable as a precursor material for nanotubes formation. The chemical properties of the CNTs were conducted using FTIR spectroscopy and PXRD analysis. The high-temperature graphitization process induced by the Thermal-CVD enables the hydrocarbons to act as carbon sources and changes the aromatic species into the layered graphite structure of CNTs.

36 MATERIALS SCIENCE↗