Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Plasma-Enhanced Atomic Layer Deposition of TiAlN: Compositional and Optoelectronic Tunability

Titanium nitride (TiN) is a unique refractory plasmonic material, the nanocomposites and alloys of which provide further opportunities to tailor its optical and photonic properties. We prepare TiAlN films of continuously variable compositions through the systematic variation of TiN versus AlN cycle ratio in plasma-enhanced atomic layer deposition (PEALD) and investigate the resulting thin-film composition, crystallinity, and optical properties. The resulting properties of TiAIN films are not simple linear combinations of the TiN and AlN films, which exhibit distinct metallic and dielectric properties, but instead are dramatically influenced by the local chemical environment of neighboring constituents. In situ spectroscopic ellipsometry further enables measurement of the varying optical properties of TiAlN films, which evolve over 10 s of nm of film thickness. The tunable optoelectronic properties of TiAlN films enable durable coatings of variable electrical resistance as well as high-temperature diffusion barriers and optical coatings with application to selective solar absorbers and emitters.

36 MATERIALS SCIENCE↗

Effect of the microwave oven on structural, morphological and electrical properties of SrBi{sub 4}Ti{sub 4}O{sub 15} thin films grown on Pt/Ti/SiO{sub 2}/Si substrates by a soft chemical method

Thin films of SrBi{sub 4}Ti{sub 4}O{sub 15} (SBTi), a prototype of the Bi-layered-ferroelectric oxide family, were obtained by a soft chemical method and crystallized in a domestic microwave oven. For comparison, films were also crystallized in a conventional method at 700 deg. C for 2 h. Structural and morphological characterization of the SBTi thin films were investigated by X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. Using platinum coated silicon substrates, the ferroelectric properties of the films were determined. Remanent polarization P{sub r} and a coercive field E{sub c} values of 5.1 {mu}C/cm{sup 2} and 135 kV/cm for the film thermally treated in the microwave oven and 5.4 {mu}C/cm{sup 2} and 85 kV/cm for the film thermally treated in conventional furnace were found. The films thermally treated in the conventional furnace exhibited excellent fatigue-free characteristics up to 10{sup 10} switching cycles indicating that SBTi thin films are a promising material for use in non-volatile memories.

36 MATERIALS SCIENCE↗

Impact of the Atomic Structure at the BiVO 4 /TiO 2 Interface on the Electronic Properties and Performance of BiVO 4 /TiO 2 Photoanodes

In photoelectrochemical cells, semiconductor electrodes are usually interfaced with protection layers to extend their stability. Ideally, the protection layer should not decrease photocurrent generation. Hence, the conduction band minimum (CBM) and valence band maximum (VBM) of the protection layer should appropriately align with those of the underlying semiconductor electrode to facilitate the desired interfacial charge transfer with minimal interfacial recombination. However, predicting interfacial band alignment can be challenging, as it may vary depending on the detailed interfacial atomic structure. Investigating the effect of the atomic structure at the semiconductor/protection layer junction on the band alignment is also challenging as it requires samples with varied interfaces without altering the semiconductor and protection layers. Here, we considered TiO 2 , the most widely used material as a protection layer, interfaced with a BiVO 4 photoanode, and we fabricated two n-type BiVO 4 (010)/TiO 2 photoanodes where a thin (∼4 nm) amorphous TiO 2 layer was deposited by atomic layer deposition (ALD). While the individual BiVO 4 (010) and TiO 2 layers were identical in these two samples, we modified the interfacial atomic structure at the BiVO 4 /TiO 2 junction by changing which precursor, Ti or O, was introduced first upon deposition of TiO 2 . By experimentally and computationally investigating the differences in these two samples, we show that the band alignments between BiVO 4 and TiO 2 at the interface may not be straightforwardly predicted by the CBM and VBM of bulk BiVO 4 and TiO 2 and that interfacial atomic arrangements can have a marked impact on the electronic properties and photoelectrochemical performance of the BiVO 4 (010)/TiO 2 photoanode.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic layer epitaxy of kagome magnet Fe 3 Sn 2 and Sn-modulated heterostructures

Magnetic materials with kagome crystal structure exhibit rich physics, such as frustrated magnetism, skyrmion formation, topological flat bands, and Dirac/Weyl points. Until recently, most studies on kagome magnets have been performed on bulk crystals or polycrystalline films. Here, we report the atomic layer molecular beam epitaxy synthesis of high-quality thin films of topological kagome magnet Fe 3 Sn 2 . The structural and magnetic characterization of Fe 3 Sn 2 on epitaxial Pt(111) identifies highly ordered films with c-plane orientation and an in-plane magnetic easy axis. Studies on the local magnetic structure by anomalous Nernst effect imaging reveal in-plane oriented micrometer size domains. Superlattice structures consisting of Fe 3 Sn 2 and Fe 3 Sn are also synthesized by atomic layer molecular beam epitaxy, demonstrating the ability to modulate the sample structure at the atomic level. The realization of high-quality films by atomic layer molecular beam epitaxy opens the door to explore the rich physics of this system and investigate novel spintronic phenomena by interfacing Fe 3 Sn 2 with other materials.

36 MATERIALS SCIENCE↗

Nanoscale determinant to brighten up GaN:Eu red light-emitting diode: Local potential of Eu-defect complexes

Emission sites in GaN:Eu red light-emitting diodes (LEDs) were investigated using a new spectroscopy technique, namely, site-selective pulse-driven emission spectroscopy (PDES). The PDES, in which the emission intensity of a pulse-driven LED is recorded with respect to the pulse frequency, revealed the charge-trapping dynamics of the Eu emission sites. We found that a determinant of the emission intensity of the sites was not their relative abundance, but rather the spatial extent of the local potential, which determines the effectiveness of the capture of injection charges. Minor sites with wider potentials enhanced the emission intensity of the LED, resulting in emission spectra that differ from those obtained using the photoluminescence of a GaN:Eu thin film. The potential curve is determined by the atomic structure of the complexes, which consist of a Eu dopant and nearby defects in the GaN host. The extent was characterized by a parameter, namely, cutoff frequency, and the emission sites with the wider and narrower potentials in the GaN:Eu LED were found to have cutoff frequencies of 400 kHz and 3 MHz, respectively. The cutoff frequency of 3 MHz was found to be the upper limit for emission sites in the LED. The emission site with the wider potential is useful for slower devices such as light fixtures, while the site with the narrower potential is useful for faster devices such as opto-isolators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Initial growth process of Co (Pd) layers on a Pd (Co) surface

The deposition process of ultra-thin Co and Pd layers is studied using DC magnetron sputtering and ex situ atomic force microscopy (AFM). It is found that observation with AFM in the air atmosphere is reliable to discuss nucleation of Co and Pd crystallites. It is discussed that a Co ultra-thin layer is formed primarily through the process of two-dimensional island formation, whereas a Pd ultra-thin layer is formed through the process of mixed two- and three-dimensional island formation. On the basis of those results, Co/Pd multilayers having a flat top surface are prepared successfully.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative Study of Zn(O,S) Buffer Layers and CIGS Solar Cells Fabricated by CBD, ALD, and Sputtering: Preprint

Zn(O,S) thin films were deposited by chemical bath deposition (CBD), atomic layer deposition, and sputtering. Composition of the films and band gap were measured and found to follow the trends described in the literature. CBD Zn(O,S) parameters were optimized and resulted in an 18.5% efficiency cell that did not require post annealing, light soaking, or an undoped ZnO layer. Promising resultswere obtained with sputtering. A 13% efficiency cell was obtained for a Zn(O,S) emitter layer deposited with 0.5%O2. With further optimization of process parameters and an analysis of the loss mechanisms, it should be possible to increase the efficiency.

14 SOLAR ENERGY↗

Solid-State Sintering of Core-Shell Ceramic Powders Fabricated by Particle Atomic Layer Deposition

The properties of technical ceramics are highly dependent on their microstructure, which evolves during sintering. Sintering is the process by which ceramic parts are subjected to high temperatures to activate chemical diffusion and the consumption of porosity. During the initial stage of sintering, interparticle necks between neighboring particles form and subsequently increase in size, consuming porosity as the particle centers move closer together. To experimentally determine how this process depends on particle surface composition, particle atomic layer deposition (ALD) was used to deposit a thin film of amorphous aluminum oxide (Al2O3) onto yttria-stabilized tetragonal zirconia (3YSZ) particles, producing core-shell structured powders. The uniformity of the Al2O3 film was confirmed with transmission electron microscopy and energy dispersive spectroscopy. Scanning electron microscopy was used to observe microstructural evolution during sintering, and the dihedral angles of Al2O3 and 3YSZ grains were measured to determine the ratio of interfacial energies between the 3YSZ|3YSZ, 3YSZ|Al2O3, and Al2O3|Al2O3 interfaces. Analysis of the densification kinetics revealed that the initial stage of densification is dependent on the material at the surface of the particles (ie, the Al2O3 film) and is controlled by the diffusion of Al3+ cations through Al2O3. Once the Al2O3 film has coalesced, the sintering behavior is controlled by the densification of the core material (3YSZ). Thus, core-shell powders fabricated by particle ALD sinter by a two-step process where the kinetics are dependent on the material present at interparticle contacts.

alumina↗

Bi-Sn alloy catalyst for simultaneous morphology and doping control of silicon nanowires in radial junction solar cells

Low-melting point metals such as bismuth (Bi) and tin (Sn) are ideal choices for mediating a low temperature growth of silicon nanowires (SiNWs) for radial junction thin film solar cells. The incorporation of Bi catalyst atoms leads to sufficient n-type doping in the SiNWs core that exempts the use of hazardous dopant gases, while an easy morphology control with pure Bi catalyst has never been demonstrated so far. We here propose a Bi-Sn alloy catalyst strategy to achieve both a beneficial catalyst-doping and an ideal SiNW morphology control. In addition to a potential of further growth temperature reduction, we show that the alloy catalyst can remain quite stable during a vapor-liquid-solid growth, while providing still sufficient n-type catalyst-doping to the SiNWs. Radial junction solar cells constructed over the alloy-catalyzed SiNWs have demonstrated a strongly enhanced photocurrent generation, thanks to optimized nanowire morphology, and largely improved performance compared to the reference samples based on the pure Bi or Sn-catalyzed SiNWs.

14 SOLAR ENERGY↗

Detection of Cu{sub 2}Zn{sub 5}SnSe{sub 8} and Cu{sub 2}Zn{sub 6}SnSe{sub 9} phases in co-evaporated Cu{sub 2}ZnSnSe{sub 4} thin-films

Cu{sub 2}ZnSnSe{sub 4} thin-films for photovoltaic applications are investigated using combined atom probe tomography and ab initio density functional theory. The atom probe studies reveal nano-sized grains of Cu{sub 2}Zn{sub 5}SnSe{sub 8} and Cu{sub 2}Zn{sub 6}SnSe{sub 9} composition, which cannot be assigned to any known phase reported in the literature. Both phases are considered to be metastable, as density functional theory calculations yield positive energy differences with respect to the decomposition into Cu{sub 2}ZnSnSe{sub 4} and ZnSe. Among the conceivable crystal structures for both phases, a distorted zinc-blende structure shows the lowest energy, which is a few tens of meV below the energy of a wurtzite structure. A band gap of 1.1 eV is calculated for both the Cu{sub 2}Zn{sub 5}SnSe{sub 8} and Cu{sub 2}Zn{sub 6}SnSe{sub 9} phases. Possible effects of these phases on solar cell performance are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An x-ray setup to investigate the atomic order of confined liquids in slit geometry

A setup has been designed to investigate thin films of confined liquids with the use of X-ray scattering methods. The confinement is realized between the flat culets of a pair of diamonds by positioning and orienting the lower diamond with nanometer and micro radian accuracy. We routinely achieve gaps between 5 and 50 nm at culet diameters of 200 μm. With this setup and a micro focused X-ray beam we have investigated the in-plane and the out-off-plane atomic order of benzene with atomic resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Materials Data on ThIn by Materials Project

ThIn is Tetraauricupride structured and crystallizes in the orthorhombic Pmmm space group. The structure is three-dimensional. Th is bonded to eight equivalent In atoms to form a mixture of distorted edge, face, and corner-sharing ThIn8 cuboctahedra. All Th–In bond lengths are 3.40 Å. In is bonded in a distorted body-centered cubic geometry to eight equivalent Th atoms.

36 MATERIALS SCIENCE↗

Novel microwave assisted sol–gel synthesis (MW-SGS) and electrochromic performance of petal like h-WO{sub 3} thin films

Graphical abstract: Electrochromic intercalation and deintercalation of Li{sup +} ions and electrons is facilitated by providing hexagonal tunnel, trigonal cavity and square window which allows easy and fast insertion and extraction of ions. Highlights: ► Novel two step MW-SGS is first time employed to prepare WO{sub 3} thin films. ► MW-SGS is simple and cost effective technique for preparation of nanostructures. ► Petal-like hexagonal WO{sub 3} nanodisks were successfully deposited. ► O/W ratio calculated by XPS studies is 2.89. ► Good electrochromic performance suggests practical usability of proposed technique. -- Abstract: Use of domestic microwave oven is first time employed for chemical deposition of nanocrystalline hexagonal WO{sub 3} (h-WO{sub 3}) thin films. Low cost precursors like sodium tungstate, hydrochloric acid, oxalic acid and potassium sulfate signifies cost effectiveness of this thin film fabrication route. Scanning electron microscopy images reveal formation of petal like nanodisks. A number of analytical techniques were used to characterize the WO{sub 3} petal like nanodisks, including X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy, FT-IR spectroscopy, Raman scattering spectroscopy, UV–visible spectrophotometry and cyclic voltammetry (CV). The X-ray photoelectron spectroscopic studies revealed 2.89 O/W atomic ratio. The electrical transport studies on WO{sub 3} thin films show semiconducting behavior with n-type semiconductivity. The value of determined coloration efficiency is 57.90 cm{sup 2}/C. The mechanism of Li{sup +} intercalation and deinercalation in h-WO{sub 3} matrix is proposed for enhanced electrochromism.

36 MATERIALS SCIENCE↗

Thermal transitions in semi-crystalline polymer thin films studied via spectral reflectance

Herein we report the finding that spectral reflectance (SR) can be used to identify thermal transitions in semi-crystalline polymer thin films. By studying film thickness as a function of temperature, we found that semi-crystalline polymers exhibit characteristic expansion and contraction profiles during the melting (T m ) and crystallization (T c ) transitions, respectively. Prior to this discovery, studies on the crystalline T m in thin films have involved more expensive and complex techniques such as atomic force microscopy (AFM), ellipsometry, and grazing-incidence wide-angle X-ray scattering (GIWAXS). We correlate T m and T c as measured by SR with differential scanning calorimetry (DSC) in the bulk and temperature-controlled GIWAXS or AFM in thin films. We show that SR is accurate for measuring changes in films with thicknesses of 500 nm down to 21 nm and for detecting melting point depression due to thin film confinement. Furthermore, we demonstrate that SR is a powerful tool for measuring thermal transitions in semi-crystalline polymer films with single-degree resolution.

36 MATERIALS SCIENCE↗

Short-range order and longer-range disorder revealed in germanium–tin alloy thin films by extended x-ray absorption fine structure analysis

Short-range order (SRO) in semiconductor alloys, a relatively under-studied structural phenomenon in which local atomic arrangements differ from those of a random solid solution, is investigated in molecular beam epitaxy (MBE)-grown GeSn thin films. A novel preparation technique is used to pattern these films into microscale ribbons that are released from the substrate for extended x-ray absorption fine structure (EXAFS) analysis. The results indicate a strong SRO in which the first shell around Sn atoms is greatly denuded of Sn atoms relative to the nominal atomic composition of the alloy. This effect is more pronounced than that observed recently in GeSn nanowires grown by chemical vapor deposition. Additionally, the presence of a longer-range disorder detected by EXAFS analysis in the shells of atoms more distant from the absorbers is indicative of the defects and inhomogeneous strain present in the MBE-grown films. The evident existence of the SRO in GeSn alloys deposited by different growth methods and in different strain states suggests that SRO is a general phenomenon in the thin films of this metastable solid solution.

74 ATOMIC AND MOLECULAR PHYSICS↗

Study of nanoparticles TiO{sub 2} thin films on p-type silicon substrate using different alcoholic solvents

In this paper, sol-gel method spin coating technique is adopted to prepare nanoparticles titanium dioxide (TiO{sub 2}) thin films. The prepared TiO{sub 2} sol was synthesized using titanium butoxide act as a precursor and subjected to deposited on the p-type silicon oxide (p-SiO{sub 2}) and glass slide substrates under room temperature. The effect of different alcoholic solvents of methanol and ethanol on the structural, morphological, optical and electrical properties were systematically investigated. The coated TiO{sub 2} thin films were annealed in furnace at 773 K for 1 h. The structural properties of the TiO{sub 2} films were examined with X-ray Diffraction (XRD). From the XRD analysis, both solvents showing good crystallinity with anatase phase were the predominant structure. Atomic Force Microscopy (AFM) was employed to study the morphological of the thin films. The optical properties were investigated by Ultraviolet-visible (UV-Vis) spectroscopy were found that ethanol as a solvent give a higher optical transmittance if compare to the methanol solvent. The electrical properties of the nanoparticles TiO{sub 2} thin films were measured using two-point-probe technique.

77 NANOSCIENCE AND NANOTECHNOLOGY↗