Verification and Validation Testing of the FLEXO Extended-MHD Code
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
A finite-difference time domain solution of the airfoil gust problem is obtained using a high-accuracy nonlinear computational aeroacoustics code. For computational efficiency, the equations are cast in chain-rule curvilinear form, and a structured multiblock solver is used in parallel. In order to fully investigate the performance of this solver, a test matrix of eight problems are computed (two airfoil geometries, two gust frequencies, and two gust configurations). These results are compared to solutions obtained by the GUST3D frequency-domain solver both on the airfoil surface and in the far field. Grid density and domain size studies are included.
Highly efficient, compact nuclear reactors would provide high specific impulse spacecraft propulsion. This analysis and numerical simulation effort has focused on the technical feasibility issues related to the nuclear design characteristics of a novel reactor design. The Fissioning Plasma Core Reactor (FPCR) is a shockwave-driven gaseous-core nuclear reactor, which uses Magneto Hydrodynamic effects to generate electric power to be used for propulsion. The nuclear design of the system depends on two major calculations: core physics calculations and kinetics calculations. Presently, core physics calculations have concentrated on the use of the MCNP4C code. However, initial results from other codes such as COMBINE/VENTURE and SCALE4a. are also shown. Several significant modifications were made to the ISR-developed QCALC1 kinetics analysis code. These modifications include testing the state of the core materials, an improvement to the calculation of the material properties of the core, the addition of an adiabatic core temperature model and improvement of the first order reactivity correction model. The accuracy of these modifications has been verified, and the accuracy of the point-core kinetics model used by the QCALC1 code has also been validated. Previously calculated kinetics results for the FPCR were described in the ISR report, "QCALC1: A code for FPCR Kinetics Model Feasibility Analysis" dated June 1, 2002.
No abstract available
This supplemental DVD contains data, code, figures, and files that were necessary for the generation of work described in NASA CR/2006-214131 (CASI ID 20060022139)
Abstract not provided.
Abstract not provided.
Hypersonic inlet research activity at NASA is reviewed. The basis for the paper is the experimental tests performed with three inlets: the NASA Lewis Research Center Mach 5, the McDonnell Douglas Mach 12, and the NASA Langley Mach 18. Both three-dimensional PNS and NS codes have been used to compute the flow within the three inlets. Modeling assumptions in the codes involve the turbulence model, the nature of the boundary layer, shock wave-boundary layer interaction, and the flow spilled to the outside of the inlet. Use of the codes and the experimental data are helping to develop a clearer understanding of the inlet flow physics and to focus on the modeling improvements required in order to arrive at validated codes.
The Double Asteroid Redirection Test (DART) is a NASA-sponsored mission that will be the first direct test of the kinetic impactor technique for planetary defense. Here, the DART spacecraft will impact into Didymos-B, the moon of the binary system 65803 Didymos and the resulting period change will be measured from Earth. Impact simulations will be used to predict the crater size and momentum enhancement expected from the DART impact. Because the specific material properties (strength, porosity, internal structure) of the Didymos-B target are unknown, a wide variety of numerical simulations must be performed to better understand possible impact outcomes. This simulation campaign will involve a large parameter space being simulated using multiple different shock physics hydrocodes. In order to understand better the behaviors and properties of numerical simulation codes applicable to the DART impact, a benchmarking and validation program using different numerical codes to solve a set of standard problems was designed and implemented.
The development of accident-tolerant fuel and advanced reactors fueled with high-assay low-enriched uranium has created an increased focus on systems with uranium enrichments between 5 and 20 wt % 235 U. SCALE criticality safety validation reports generated at Oak Ridge National Laboratory contain very few benchmark experiments in this range. The work presented herein is an initial investigation of expanded validation of the entire range of enrichments for uranium-fueled systems, including consideration of over 300 newly developed KENO models. The vast majority of the new models are between 4.4 wt % and 37.5 wt % enrichment and include a variety of thermal, intermediate, and mixed neutron spectra. This work finds no strong evidence of an enrichment-dependent bias, but there are indications of a spectrum-dependent bias. There are, however, only a limited number of independent experiments included at this time to distinguish intermediate enrichment effects from intermediate spectrum effects. Further work in this area is ongoing for intermediate enrichment systems. In the long run, the addition of these models to the Verified, Archived Library and Inputs and Data is planned, as funding and staff availability allow.
This repository is the research software and reproducibility companion for the HerwigPol polarized deep-inelastic scattering implementation developed for Herwig 7. It brings together the modified Herwig and ThePEG source snapshots, the curated POLDIS fixed-order reference code, the custom Rivet analyses, the DIS validation workflow, and the paper source in a single formal repository layout. The repository is intended to preserve the source-level ingredients needed to rebuild and re-run the validated DIS studies. It therefore tracks code, input cards, workflow drivers, and technical notes, while intentionally excluding generated artifacts such as build products, campaign outputs, merged YODA files, plots, and rendered paper outputs.
Hypersonic inlet research activity at NASA is reviewed. The basis is the experimental tests performed with three inlets: the NASA-Lewis Mach 5, the McDonnell Douglas Mach 12, and the NASA-Langley Mach 18. Both 3-D parabolized Navier-Stokes and Navier-Stokes codes were used to compute the flow within the three inlets. Modeling assumptions in the codes involve the turbulence model, the nature of the boundary layer, shock wave boundary layer interaction, and the flow spilled to the outside of the inlet. Use of the codes in conjunction with the experimental data are helping to develop a clearer knowledge of the inlet flow physics and to focus on the modeling improvements required in order to arrive at validated codes.
The Alternative Nonlinear Two-phase Subchannel solver (ANTS) code was written to provide a fast-running, steady-state, pin-resolved modeling and simulation tool for analysis of common boiling water reactor (BWR) geometry and common operating conditions. ANTS has been integrated into the Virtual Environment for Reactor Application (VERA) core simulator software, where it can be used to provide a thermal/hydraulic (T/H) subchannel solution that is then used to provide neutronic feedback as well as perform the fuel depletion and temperature solution. Herein, this paper presents the rigorous analysis performed on the ANTS code, which includes both code and solution verification testing, benchmarking with the existing two-phase subchannel capability in VERA, CTF, and validation testing using popular two-phase experiments such as PWR Sub-channel and Bundle Tests (PSBT), BWR Full-size Fine-mesh Bundle Tests (BFBT), Risø, and FRIGG. This assessment was used to qualify ANTS for its intended applications before its use for core-scale, multiphysics BWR simulations. In general, it was found that agreement with experimental data was good; errors were within the range of experimental data uncertainty. Furthermore, code and solution verification confirmed that the governing equations and the most important closure terms were correctly implemented and behaving as expected.
This paper presents an introduction to the development of the flux map processing code MAPLE developed by China Nuclear Power Technology Research Institute (CNPPJ), China Guangdong Nuclear Power Group (CGN). The method to get the three-dimensional 'measured' power distribution according to measurement signal has also been described. Three methods, namely, Weight Coefficient Method (WCM), Polynomial Expand Method (PEM) and Thin Plane Spline (TPS) method, have been applied to fit the deviation between measured and predicted results for two-dimensional radial plane. The measured flux map data of the LINGAO nuclear power plant (NPP) is processed using MAPLE as a test case to compare the effectiveness of the three methods, combined with a 3D neutronics code COCO. Assembly power distribution results show that MAPLE results are reasonable and satisfied. More verification and validation of the MAPLE code will be carried out in future. (authors)
Hypersonic inlet research activity at NASA is reviewed. The basis is the experimental tests performed with three inlets: the NASA Lewis Research Center Mach 5, the McDonnell Douglas Mach 12, and the NASA Langley Mach 18. Both three-dimensional parabolized Navier-Stokes and Navier-Stokes codes were used to compute the flow within the three inlets. Modeling assumptions in the codes involve the turbulence model, the nature of the boundary layer, shock wave boundary layer interaction, and the flow spilled to the outside of the inlet. Use of the codes in conjunction with the experimental data are helping to develop a clearer understanding of the inlet flow physics and to focus on the modeling improvements required in order to arrive at validated codes.
Verification and validation (V&V) of scientific computing programs are important at San- dia National Laboratories (SNL) due to the expanding role of computational simulation in managing the United States nuclear stockpile. This document presents the verification plan for the Sierra Structural Dynamics application. This verification plan includes code devel- opment practices, structure of test suites, and additional quality assurance practices used by the Sierra/SD team.
In response to the accident at the Fukushima Daiichi nuclear power station in Japan, the U.S. Nuclear Regulatory Commission and U.S. Department of Energy agreed to jointly sponsor an accident reconstruction study as a means of assessing the severe accident modeling capability of the MELCOR code. Objectives of the project included reconstruction of the accident progressions using computer models and accident data, and validation of the MELCOR code and the Fukushima models against plant data. A MELCOR 2.1 model of the Fukushima Daiichi Unit 3 reactor is developed using plant-specific information and accident-specific boundary conditions, which involve considerable uncertainty due to the inherent nature of severe accidents. Publicly available thermal-hydraulic data and radioactivity release estimates have evolved significantly since the accidents. Such data are expected to continually change as the reactors are decommissioned and more measurements are performed. As a result, the MELCOR simulations in this work primarily use boundary conditions that are based on available plant data as of May 2012.
The Jet Propulsion Laboratory's (JPL) Advanced Multi-Mission Operations System (AMMOS) system processes data received from deep-space spacecraft, where error rates are high, bit rates are low, and every bit is precious. Frame synchronization and data extraction as performed by AMMOS enhanced data acquisition and reliability for maximum data return and validity.