Search NASA⌕ Search

SEARCH · Search NASA

Results for “comparisons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Comparison of near-background concentrations of Argon-37 and Xenon-133 in the Atmosphere

Radioisotopes of noble gases xenon and argon can be important indicators of underground nuclear explosions. The Comprehensive Nuclear-Test-Ban Treaty (CTBT) includes monitoring capabilities to identify potential nuclear explosions conducted in violation of the CTBT. This monitoring currently focuses on measurement of the xenon isotopes 133Xe, 135Xe, 131mXe and 133mXe. However, it is predicted that within 100 days of an underground nuclear explosion (UNE) 37Ar would be released to the atmosphere at higher concentrations than xenon isotopes (Haas et al. 2010) and with a higher signal to background ratio, depending on the radioxenon background levels. Therefore, inclusion of 37Ar measurement capabilities at atmospheric International Monitoring System (IMS) stations may represent an improvement in the capability to detect a nuclear explosion. At an IMS station, it could be difficult to determine what constitutes an elevated concentration as a result of an UNE without first understanding the expected range of background concentrations. This work describes our analysis of atmospheric samples for 37Ar to evaluate the range of background concentrations. Samples were collected at multiple locations, with approximately half coming from a sampler co-located with an IMS xenon monitoring station (RN75). The range of 37Ar concentrations measured in atmospheric air samples was relatively narrow; for samples considered detectable, the minimum and maximum measured concentrations were 0.56 and 2.3 mBq/m3, respectively. Comparison of 37Ar and 133Xe concentrations measured at the IMS station indicated some correlation between the measured concentrations. The results presented here demonstrate the capability to detect background concentrations of 37Ar in atmospheric air and provide a basis for potential implementation of 37Ar monitoring at IMS stations.

Fritz, Brad G.↗

Projecting spatiotemporally explicit effects of climate change on stream temperature: A model comparison and implications for coldwater fishes

Conservation planners and resource managers seek information about how the availability and locations of cold-water habitats will change in the future and how these predictions vary among models. In this work, we used a physical process-based model to demonstrate the implications of climate change for streamflow and water temperature in two watersheds with distinctive flow regimes: the Snoqualmie watershed (WA) and Siletz watershed (OR), USA. Our model incorporated a downscaled ensemble of global climate model outputs and was calibrated with in situ and remotely sensed water temperatures. Furthermore, we compared predictions from our processed-based model to those from a publicly available and widely used statistical model. The process-based model projected greater changes in summer maximum water temperatures for the mixed-rain-snow Snoqualmie watershed than for the rain-dominated Siletz watershed as a result of the near-complete loss of winter snowpack and significant reduction in summer flow in the Snoqualmie watershed expected by the 2080s. Both models projected generally similar future spatial patterns of maximum water temperature in the two rivers, with cool reaches distributed farther upstream and fewer in number. However, the process-based model projected higher spatial heterogeneity in water temperature due to our spatially explicit simulation of streamflow and because we calibrated the model with spatially continuous remotely sensed water temperature data. We used stream temperature projections to assess the vulnerability of Pacific salmon and trout to changes in the spatial distribution of cold-water habitats during August by the 2080s. Results suggest that salmonids may have fewer summertime cold-water habitats in both watersheds. Projected stream warming may further limit particular species and life stages, especially in the Snoqualmie watershed. Our comparison of models highlights the importance of considering what might be gained by using a process-based model for evaluating and prioritizing management actions that mitigate climate impacts on cold-water habitats for stream fishes.

54 ENVIRONMENTAL SCIENCES↗

Understanding the differences between genome sequences of Escherichia coli B strains REL606 and BL21(DE3), and comparison of the closely related E. coli B and K-12 genomes

Each difference between the genome sequences of Escherichia coli B strains REL606 and BL21(DE3) can be interpreted in light of known laboratory manipulations plus a gene conversion between ribosomal RNA operons. Two treatments with 1-methyl-3-nitro-1-nitrosoguanidine in the REL606 lineage produced at least 93 single-base-pair mutations ({approx} 90% GC-to-AT transitions) and 3 single-base-pair GC deletions. Two UV treatments in the BL21(DE3) lineage produced only 4 single-base-pair mutations but 16 large deletions. P1 transductions from K-12 into the two B lineages produced 317 single-base-pair differences and 9 insertions or deletions, reflecting differences between B DNA in BL21(DE3) and integrated restriction fragments of K-12 DNA inherited by REL606. Two sites showed selective enrichment of spontaneous mutations. No unselected spontaneous single-base-pair mutations were evident. The genome sequences revealed that a progenitor of REL606 had been misidentified, explaining initially perplexing differences. Limited sequencing of other B strains defined characteristic properties of B and allowed assembly of the inferred genome of the ancestral B of Delbrueck and Luria. Comparison of the B and K-12 genomes shows that more than half of the 3793 proteins of their basic genomes are predicted to be identical, although {approx} 310 appear to be functional in either B or K-12 but not in both. The ancestral basic genome appears to have had {approx} 4039 coding sequences occupying {approx} 4.0 Mbp. Repeated horizontal transfer from diverged Escherichia coli genomes and homologous recombination may explain the observed variable distribution of single-base-pair differences. Fifteen sites are occupied by phage-related elements, but only six by comparable elements at the same site. More than 50 sites are occupied by IS elements in both B and K, 16 in common, and likely founding IS elements are identified. A signature of widespread cryptic phage P4-type mobile elements was identified. Complex deletions (dense clusters of small deletions and substitutions) apparently removed nonessential genes from {approx} 30 sites in the basic genomes.

59 BASIC BIOLOGICAL SCIENCES↗

Comparison of Bolus Materials to Highly Absorbent Polypropylene and Rayon Cloth

This study assesses the utility of a highly absorbent polypropylene and rayon cloth (HAPRC) as a bolus material in radiation therapy. A comparison of various bolus materials used clinically at our center to the test bolus material, water-saturated HAPRC, was conducted. The reproducibility of the physical density was assessed by computerized tomography (CT) scanning the water-saturated HAPRC on a uniform density block phantom on multiple occasions, allowing the cloth to dry fully between subsequent CT scans. The cloth was found to have a consistent physical density between 0.8 and 1.0 g/cm{sup 3}. To evaluate the dosimetric impact of the various bolus materials, metal oxide semiconductor field effect transistor dosimetry measurements were performed for a 6 MV treatment beam on the anterior surface of an anthropomorphic thorax phantom. The ability of the bolus material to conform to an irregular surface was assessed by CT scanning the various bolus materials overlaying the nose of an anthropomorphic head phantom and another irregularly shaped test object. The HAPRC conforms well to irregular contours and is relatively inexpensive compared to Superflab and thermoplastic sheets. Before implementing the material into the clinical setting, an appropriate process for laundering the material should be determined, for hygienic reasons.

61 RADIATION PROTECTION AND DOSIMETRY↗

Theoretical and computational comparison of models for dislocation dissociation and stacking fault/core formation in fcc crystals

In this study, the purpose of the current work is the theoretical and computational comparison of selected models for the energetics of dislocation dissociation resulting in stacking fault and partial dislocation (core) formation in fcc crystals as based on the (generalized) Peierls–Nabarro (GPN: e.g., Xiang et al., 2008, Shen et al., 2014), and phase-field (PF: e.g., Shen and Wang, 2004, Hunter et al., 2011, Hunter et al., 2013, Mianroodi and Svendsen, 2015), methodologies (e.g., Wang and Li, 2010).

36 MATERIALS SCIENCE↗

Comparison of methods for the NMR measurement of motionally averaged dipolar couplings

Motionally averaged dipolar couplings are an important tool for understanding the complex dynamics of catalysts, polymers, and biomolecules. While there is a plethora of solid-state NMR pulse sequences available for their measurement, in can be difficult to gauge the methods’ strengths and weaknesses. In particular, there has not been a comprehensive comparison of their performance in natural abundance samples, where 1H homonuclear dipolar couplings are important and the use of large MAS rotors may be required for sensitivity reasons. In this work, we directly compared some of the more common methods for measuring C–H dipolar couplings in natural abundance samples using L-alanine (L-Ala) and the N-formyl-L-methionyl-L-leucyl-L-phenylalanine (fMLF) tripeptide as model systems. Here, we evaluated their performance in terms of accuracy, resolution, sensitivity, and ease of implementation. We found that, despite the presence of 1H homonuclear dipolar interactions, all methods, with the exception of REDOR, were able to yield the reasonable dipolar coupling strengths for both mobile and static moieties. Of these methods, PDLF provides the most convenient workflow and precision at the expense of low sensitivity. In low-sensitivity cases, MAS-PISEMA and DIPSHIFT appear to be the better options.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cascade Defect Evolution Processes: Comparison of Atomistic Methods

Determining the defect evolution beyond the molecular dynamics (MD) time scale is critical in bridging the gap between atomistic simulations and experiments. The recently developed self-evolving atomistic kinetic Monte Carlo (SEAKMC) method provides new opportunities to simulate long-term defect evolution with MD-like fidelity. In this study, SEAKMC is applied to investigate the cascade defect evolution in bcc iron. First, the evolution of a vacancy rich region is simulated and compared with results obtained using autonomous basin climbing (ABC) +KMC and kinetic activation-relaxation technique (kART) simulations. Previously, it is found the results from kART are orders of magnitude faster than ABC+KMC. The results obtained from SEAKMC are similar to kART but the time predicted is about one order of magnitude faster than kART. The fidelity of SEAKMC is confirmed by statistically relevant MD simulations at multiple higher temperatures, which proves that the saddle point sampling is close to complete in SEAKMC. The second is the irradiation-induced formation of C15 Laves phase nano-size defect clusters. In contrast to previous studies, which claim the defects can grow by capturing self-interstitials, we found these highly stable clusters can transform to <111> glissile configuration on a much longer time scale. Finally, cascade-annealing simulations using SEAKMC is compared with traditional object KMC (OKMC) method. SEAKMC predicts substantially fewer surviving defects compared with OKMC. The possible origin of this difference is discussed and a possible way to improve the accuracy of OKMC based on SEAKMC results is outlined. These studies demonstrate the atomistic fidelity of SEAKMC in comparison with other on-the-fly KMC methods and provide new information on long-term defect evolution in iron.

Xu, Haixuan↗

Spherical nanoindentation of proton irradiated 304 stainless steel: A comparison of small scale mechanical test techniques for measuring irradiation hardening

Experimentally quantifying the mechanical effects of radiation damage in reactor materials is necessary for the development and qualification of new materials for improved performance and safety. This can be achieved in a high-throughput fashion through a combination of ion beam irradiation and small scale mechanical testing in contrast to the high cost and laborious nature of bulk testing of reactor irradiated samples. The current paper focuses on using spherical nanoindentation stress-strain curves on unirradiated and proton irradiated (10 dpa at 360 °C) 304 stainless steel to quantify the mechanical effects of radiation damage. Spherical nanoindentation stress-strain measurements show a radiation-induced increase in indentation yield strength from 1.36 GPa to 2.72 GPa and a radiation-induced increase in indentation work hardening rate of 10 GPa–30 GPa. These measurements are critically compared against Berkovich nanohardness, micropillar compression, and micro-tension measurements on the same material and similar grain orientations. The ratio of irradiated to unirradiated yield strength increases by a similar factor of 2 when measured via spherical nanoindentation or Berkovich nanohardness testing. A comparison of spherical indentation stress-strain curves to uniaxial (micropillar and micro-tension) stress-strain curves was achieved using a simple scaling relationship which shows good agreement for the unirradiated condition and poor agreement in post-yield behavior for the irradiated condition. Finally, the disagreement between spherical nanoindentation and uniaxial stress-strain curves is likely due to the plastic instability that occurs during uniaxial tests but is absent during spherical nanoindentation tests.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Testing fast reactor fuels in a thermal reactor: Comparison of transmutation metallic fuel alloys behavior by scanning electron microscopy

To optimize nuclear waste repository performance, the destruction of minor actinide elements, particularly Np and Am, in a neutron fast spectrum reactor is possible by incorporating these elements into nuclear fuel. Evaluating the performance of minor actinide containing fuel is of paramount importance to enabling this technology. However, such a task is challenging without an available domestic fast spectrum test reactor. A comparison of fuel performance tested in an available domestic thermal reactor at the Idaho National Laboratory, the Advanced Test Reactor, and in a fast spectrum reactor in France (Phénix) is presented here in this study. This study evaluates the capability of using a cadmium shrouded test position to mimic the power profile along the fuel radius present in fast spectrum reactors so that thermally driven phenomenon (e.g., constituent redistribution) can be evaluated in a thermal reactor and determined to be prototypical of a fast reactor. Thus, optical microscopy and scanning electron microscopy has been performed on irradiated 35U-29Pu-4Am-2Np-30Zr fuel samples (where the number preceding the element is the weight percent concentration) from the two mentioned reactors that present similar irradiation temperatures and power conditions. The results indicate that fuel performance phenomena are reproducible in the two irradiation conditions. The redistribution of Zr occurred in the same manner for the two samples. Similar partitioning of U-Pu-Zr phases was observed, and the behavior of Am was similar in the analyzed specimens. Finally, the overall microstructure evolution seems not to be affected by minor actinides addition compared to expected behavior of conventional U-19Pu-10Zr ternary metal fuels for both specimens. Slight differences in fuel cladding chemical interaction were, however, observed. This difference is likely driven by difference in cladding composition rather than irradiation conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparison of hardening and microstructures of ferritic/martensitic steels irradiated with fast neutrons and dual ions

Ferritic/martensitic steels T91 and HT9 were irradiated with neutrons (BOR-60 reactor) and dual ions (9 MeV Fe 3+ and 3.42 MeV energy degraded He 2+ ) from 369 to 520 °C and damage levels of 16.6 to 72 dpa to quantify the possibility of using ion irradiation to simulate neutron irradiation in terms of microstructures and mechanical properties. Nanoindentation testing was performed to obtain the bulk equivalent hardness of the dual-ion irradiated samples. For the neutron irradiated samples, both nanoindentation and Vickers hardness testing were conducted. Transmission Electron Microscopy (TEM) characterizations of the cavities, dislocation loops and precipitates were conducted to account for the strengthening contribution of each microstructure element. The good agreement between the microstructure-predicted (dispersed barrier hardening) and measured strength of the irradiated specimens demonstrated the accuracy of the strengthening model and the nanoindentation tests. Furthermore, the comparison of mechanical property and microstructure changes in ion and neutron irradiated structural materials indicated that ion irradiation replicated many neutron irradiation features. However, a single 70 °C temperature shift is insufficient to match all complex microstructures of neutron vs. ion irradiation over the irradiation temperature range of 369–520 °C.

36 MATERIALS SCIENCE↗

Fast charge implications: Pack and cell analysis and comparison

This study investigates the effect of 50-kW (about 2C) direct current fast charging on a full-size battery electric vehicle's battery pack in comparison to a pack exclusively charged at 3.3 kW, which is the common alternating current Level 2 charging power level. Comparable scaled charging protocols are also independently applied to individual cells at three different temperatures, 20 °C, 30 °C, and 40 °C, to perform a comparative analysis with the packs. Dominant cell-level aging modes were identified through incremental capacity analysis and compared with full packs to gain a clear understanding of additional key factors that affect pack aging. While the cell-level study showed a minor impact on performance due to direct current fast charging, the packs showed a significantly higher rate of capacity fade under similar charging protocols. This indicates that pack-level aging cannot be directly extrapolated from cell evaluation. With this being said, delayed fast charging, completing shortly before discharge, was found to have less of an impact on battery degradation than conventional alternating current Level 2 charging

25 ENERGY STORAGE↗

Discussion of “Response Surface Design Evaluation and Comparison” by C.M. Anderson-Cook, C.M. Borror, and D.C Montgomery

The article “Response Surface Design Evaluation and Comparison” by C.M. Anderson-Cook, C.M. Borror, and D.C Montgomery is discussed. The discussion covers three issues. First, graphical methods for evaluating and comparing experimental designs should utilize the unscaled prediction variance (PV) rather than the scaled prediction variance (SPV). Using PV makes it easier for practitioners to see how prediction variance is decreased by designs with larger numbers of points, and to assess the “cost” of that decrease in a flexible manner. Using SPV confounds “prediction variance” and “cost” information in a pre-defined way, thus making design choice harder for practitioners. The second and third comments are that bias properties as well as variance properties of designs should be accounted for in constructing, evaluating, and comparing experimental designs.

97 MATHEMATICS AND COMPUTING↗

Comparison of T-piece and concentric mixing systems for continuous flow synthesis of anatase nanoparticles in supercritical isopropanol/water

T-piece and concentric counter-flow mixing systems are compared in continuous flow supercritical solvothermal synthesis of TiO{sub 2} at identical system parameters. The phase pure anatase nanoparticle products were characterized with powder X-ray diffraction (PXRD), transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS), and the particle size, size distribution and absolute crystallinity mapped as a function of temperature, precursor concentration, flow rate and pressure for the two different continuous flow reactors. The particles synthesized with the T-piece geometry are smaller with a narrower size distribution, possibly indicating a more effective mixing, than particles synthesized at the same conditions with concentric counter-flow geometry. In general, an increased synthesis temperature leads to an increase in absolute crystallinity. For the particles synthesized with the concentric reactor geometry crossing of the critical point of the solvent causes a decrease in the particle size and size distribution, and conditions just above the critical temperature are demonstrated to be optimal for continuous solvothermal synthesis of anatase. - Grapical Abstract: Direct experimental comparison of T-piece and concentric mixing geometries in supercritical continuous flow synthesis of anatase nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic diffusion mastering using crystal-chemistry parameters: tau-Cu{sub 1/2}Ag{sub 1/2}V{sub 2}O{sub 5} structure determination and comparison with refined delta-Ag{sub x}V{sub 2}O{sub 5} and epsilon-Cu{sub x}V{sub 2}O{sub 5} ones

tau-Ag{sub 1/2}Cu{sub 1/2}V{sub 2}O{sub 5} compound crystallises in the monoclinic system space group C2/m with cell parameters a=11.757(4) A, b=3.6942(5) A, c=9.463(2) A, and beta=114.62(2){sup o}. The structure is build up with V{sub 4}O{sub 10} D4 double layer. The silver and copper ions are located in two different oxygenated tunnels. Examination of electronic density maps shows that while the silver ions are located in defined crystallographic sites, the copper ones are fully delocalised over the whole tunnel. Comparison with delta-Ag{sub x}V{sub 2}O{sub 5} and epsilon-Cu{sub x}V{sub 2}O{sub 5} refined structure allows to define crystal chemistry parameters governing the ionic delocalisation and give clues to predict from structural consideration the expected electrical behaviour with the aim to make possible a structural design to enhance guest species reactivity. - Graphical abstract: The role of nature and amount of guest species on their respective localisation Evidence for full delocalisation of copper ions and diffusion pathways visualisation Display Omitted

36 MATERIALS SCIENCE↗

A comparison of the photocatalytic activity of six tunneled titanates

The photocatalytic behavior of six tunneled titanates—Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}, Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10}, Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, K{sub 1}Ga{sub 17}Ti{sub 15}O{sub 56}, K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16}, and BaTi{sub 4}O{sub 9}—was investigated using methylene blue as an indicator and a xenon arc lamp as the radiation source. Powders prepared by solid state reaction had surface areas ranging from 0.40 to 1.58 m{sup 2}/g and particle sizes ranging from 1 to 25 μm. Bandgaps, as measured from diffuse reflectance data, ranged from 2.84 to 4.15 eV. Two of the tunneled titanates—Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10} and Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}—exhibited negligible photocatalytic activity. The activities of Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, KGa{sub 17}Ti{sub 15}O{sub 56}, and K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16} were similar to each other, exhibiting apparent first-order reaction rates of 0.275 to 0.31 h{sup −1} using 100 mg of powder in 125 ml of 20 μM methylene blue at room temperature. The BaTi{sub 4}O{sub 9} sample exhibited the highest photocatalytic activity with an apparent first-order reaction rate of 0.53 h{sup −1} under the same conditions. The addition of a RuO{sub 2} co-catalyst improved the photocatalytic activity of Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}, decreased the activity of BaTi{sub 4}O{sub 9}, and had little effect on the activity of the other powders. A comparison of the structural features in the six materials shows that photocatalytic activity is strongly related to the density of TiO{sub 6} octahedra in the different crystal structures. Among the gallium-containing tunneled titanates, photocatalytic activity increased with decreasing band gap. - Graphical abstract: Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}—One of the tunneled titanates investigated. Highlights: ► The photocatalytic activity of six tunneled titanates was compared. ► Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10} and Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8} exhibited negligible photocatalytic activity. ► The activities of Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, KGa{sub 17}Ti{sub 15}O{sub 56}, and K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16} were similar to each other. ► BaTi{sub 4}O{sub 9} exhibited the highest photocatalytic activity. ► Photocatalytic activity is related to the density of TiO{sub 6} octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase polymorphism of novel [Ru(NH{sub 3}){sub 6}](ClO{sub 4}){sub 3}—Comparison with [Ru(NH{sub 3}){sub 6}](BF{sub 4}){sub 3}. Part II

[Ru(NH{sub 3}){sub 6}](ClO{sub 4}){sub 3} undergoes two phase transitions at: T{sub C1}=290.3 K and T{sub C2}=74.8 K , thus exhibits three crystalline phases in the temperature range of 5–310 K. For the detected phase transitions, thermal effects were determined. Fourier transform far- and middle-infrared spectra (FT-FIR and FT-MIR), recorded at 8–350 K, suggest that reorientational motions of the NH{sub 3} ligands are very fast (τ{sub R}≈10{sup −12} s above T{sub C1}) and are significantly slowed down below T{sub C2}. X-ray single crystal diffraction (XRSCD) measurements revealed that in the high temperature phase (above T{sub C1}) the compound belongs to the cubic Fm3{sup ¯}m (No. 225) space group, whereas in the intermediate phase the unit cell parameter doubles and the space group is Ia3{sup ¯}(No. 206). {sup 1}H NMR studies revealed that the following reorientational motions are liberated during heating: three-fold reorientation of NH{sub 3} ligands, three-fold reorientation of the entire [Ru(NH{sub 3}){sub 6}]{sup 3+} cation, and isotropic reorientation of this cation. In the high temperature phase I the cations perform isotropic reorientations with the estimated activation energy equal to ca. 30.1 kJ mol{sup −1}. Comparison with adequate results obtained earlier for [Ru(NH{sub 3}){sub 6}](BF{sub 4}){sub 3} and for other similar compounds was made and general regularities were drawn. - Graphical abstract: Molar heat capacities obtained for [Ru(NH{sub 3}){sub 6}](ClO{sub 4}){sub 3} at temperatures between 5 and 310 K. Molecular structure of [Ru(NH{sub 3}){sub 6}]{sup 3+} and two types of ClO{sub 4}{sup -} varying in dynamic disorder at 293 K. Highlights: • Two solid phase transitions have been found in [Ru(NH{sub 3}){sub 6}](ClO{sub 4}){sub 3}. • The transitions are triggered by the hydrogen bond interactions between NH{sub 3} ligands and ClO{sub 4}{sup −} anions. • The complex is a highly dynamically disordered crystal across a wide temperature range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cationic disorder and Mn{sup 3+}/Mn{sup 4+} charge ordering in the B′ and B″ sites of Ca{sub 3}Mn{sub 2}NbO{sub 9} perovskite: a comparison with Ca{sub 3}Mn{sub 2}WO{sub 9}

We describe the preparation, crystal structure determination, magnetic and transport properties of two novel Mn-containing perovskites, with a different electronic configuration for Mn atoms located in B site. Ca{sub 3}Mn{sup 3+}{sub 2}WO{sub 9} and Ca{sub 3}Mn{sup 3+/4+}{sub 2}NbO{sub 9} were synthesized by standard ceramic procedures; the crystallographic structure was studied from X-ray powder diffraction (XRPD) and neutron powder diffraction (NPD). Both phases exhibit a monoclinic symmetry (S.G.: P2{sub 1}/n); Ca{sub 3}Mn{sub 2}WO{sub 9} presents a long-range ordering over the B sites, whereas Ca{sub 3}Mn{sub 2}NbO{sub 9} is strongly disordered. By “in-situ” NPD, the temperature evolution of the structure study presents an interesting evolution in the octahedral size (〈Mn–O〉) for Ca{sub 3}Mn{sub 2}NbO{sub 9}, driven by a charge ordering effect between Mn{sup 3+} and Mn{sup 4+} atoms, related to the anomaly observed in the transport measurements at T≈160 K. Both materials present a magnetic order below T{sub C}=30 K and 40 K for W and Nb materials, respectively. The magneto-transport measurements display non-negligible magnetoresistance properties in the paramagnetic regime. - Graphical abstract: Comparison between the octahedron size and the magnetic behaviour for Ca{sub 3}Mn{sub 2}NbO{sub 9} in the temperature region where the charge and magnetic order occur. Display Omitted - Highlights: • Two novel Mn-containing double perovskites were obtained by solid-state reactions. • Both double perovskites are monoclinic (P2{sub 1}/n) determined by XRPD and NPD. • Ca{sub 3}Mn{sub 2}WO{sub 9} contains Mn{sup 3+} while Ca{sub 3}Mn{sub 2}NbO{sub 9} includes mixed-valence cations Mn{sup 3+}/Mn{sup 4+}. • Ca{sub 3}Mn{sub 2}NbO{sub 9} presents a charge-ordering effect between Mn{sup 3+} and Mn{sup 4+} evidenced by NPD. • The magnetic and transport studies evidenced the charge ordering in Ca{sub 3}Mn{sub 2}NbO{sub 9}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural distortion and band gap opening of hard MnB{sub 4} in comparison with CrB{sub 4} and FeB{sub 4}

MnB{sub 4} was newly synthesized to crystallize in a monoclinic P2{sub 1}/c structure, different from previous experimental and theoretical reports. Here, based on first-principles calculations, we perform a comparative study of geometric and energetic features, mechanical behaviors, electronic property and chemical bonding of the experimentally identified monoclinic MnB{sub 4}, as well as orthorhombic CrB{sub 4} and FeB{sub 4}. The results demonstrate that the presence of distorted rhomboidal-B{sub 4} units and one-dimensional Mn chains in the monoclinic MnB{sub 4} breaks the structural symmetry and lowers the total energy in comparison to the orthorhombic phase. The opening of band gap in MnB{sub 4} is induced by Peierls-paired Mn atoms, differing from the metallic behaviors of recently studied tetraborides. Specifically, the preservations of covalent bonding in distorted boron-rhomboids in MnB{sub 4} explain the relatively higher incompressibility and hardness. - Graphical abstract: P2{sub 1}/c-type structure for MnB{sub 4} characterizes rhomboid-B{sub 4} units and alternately short and long Mn–Mn chains. - Highlights: • The novel P2{sub 1}/c-type MnB{sub 4} compound is studied by first-principles calculations. • P2{sub 1}/c-type MnB{sub 4} has lower total energy and relatively higher stability. • An energy gap opening is found for P2{sub 1}/c-type MnB{sub 4} induced by Mn atom pairs. • P2{sub 1}/c-type MnB{sub 4} exhibits excellent mechanical properties. • The mechanical properties of TcB{sub 4} and ReB{sub 4} in P2{sub 1}/c structure are also studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗