Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Remote sensing applied to prospecting of thermomineral water in the county of Caldas Novas-Goias

LANDSAT imagery of the region were studied allowing the placement of the area of study in the regional geological context. A geological mapping of the 1.60.000 scale was done. A methodology was developed which consisted in a regional temperature mapping using trend surface analysis. Through the correlation of all these data, four different areas were localized with a high potential as thermomineral sources.

Veneziani, P.↗

Precise terrestrial time: A means for improved ballistic missile guidance analysis

An approach developed to improve the ground instrumentation time tagging accuracy and adapted to support the Minuteman ICBM program is desired. The Timing Insertion Unit (TIU) technique produces a telemetry data time tagging resolution of one tenth of a microsecond, with a relative intersite accuracy after corrections and velocity data (range, azimuth, elevation and range rate) also used in missile guidance system analysis can be correlated to within ten microseconds of the telemetry guidance data. This requires precise timing synchronization between the metric and telemetry instrumentation sites. The timing synchronization can be achieved by using the radar automatic phasing system time correlation methods. Other time correlation techniques such as Television (TV) Line-10 and the Geostationary Operational Environmental Satellites (GEOS) terrestial timing receivers are also considered.

Ehrsam, E. E.↗

Aviation noise overload in the immediate proximity of the Warsaw-Okecie airport

The results are presented for investigations on noise overload around the Warszawa-Okecie airport on persons inhabiting the area where it exceeds 100 dB for a single aircraft flight. Of 256 subjects, 91.1 percent complained about aircraft noise overload. In the population studied considerable differences were noted respecting the subjective sensitivity scale. Statistical analysis showed numerous correlations between the individual noise sensitivity threshold and the subject's state of health, age, sex, type of work, etc. At the same time investigations demonstrated various forms and levels of disturbance in the organism for individual subjects and groups. The most frequent complaint was chronic fatigue (68.1 percent), followed by nervousness (36.6 percent), frequent headaches (36.2 percent), hearing disturbances (30.0 percent) and sleep disorders (23.9 percent).

Koszarny, Z.↗

Postbuckling behavior of selected flat stiffened graphite-epoxy panels loaded in compression

Results of an experimental study of the postbuckling behavior of selected flat stiffened graphite-epoxy panels loaded in compression are presented. The postbuckling response and failure characteristics of undamaged panels and panels damaged by low-speed impact are described. Each panel had four equally-spaced I-spaced stiffeners and 16- or 24-ply quasi-isotropic skins. Panels with three different stiffener spacings were tested. Some undamaged specimens supported as much as three times their initial buckling load before failing. Failure of all panels initiated in a skin-stiffener interface region. Analytical results obtained from a nonlinear general shell finite element analysis computer code correlate well with typical postbuckling test results up to failure. The analytical modeling detail necessary to predict accurately the response of a panel is described. Test results show that low-speed impact damage can reduce the postbuckling strength of a stiffened panel and that the skin-stiffener interface region is more sensitive to impact damage than the skin midway between stiffeners.

Starnes, J. H., Jr.↗

Development and test of advanced composite components. Center Directors discretionary fund program

This report describes the design, analysis, fabrication, and test of a complex bathtub fitting. Graphite fibers in an epoxy matrix were utilized in manufacturing of 11 components representing four different design and layup concepts. Design allowables were developed for use in the final stress analysis. Strain gage measurements were taken throughout the static load test and correlation of test and analysis data were performed, yielding good understanding of the material behavior and instrumentation requirements for future applications.

Faile, G.↗

Structure-to-glass transition temperature relationships in high temperature stable condensation polyimides

The presence of a hexafluoroisopropylidene (6F) connecting group in aryl dianhydrides used to prepare aromatic condensation polyimides provides high glass transition temperature (T sub g) polyimides with excellent thermo-oxidative stability. The purpose of this study was to determine if a trifluorophenyl-ethylidene (3F) connecting group would have a similar effect on the T sub g of aromatic condensation polyimides. A new dianhydride containing the 3F connecting group was synthesized. This dianhydride and an aromatic diamine also containing the 3F connecting group were used together and in various combinations with known diamines or known dianhydrides, respectively, to prepare new 3F containing condensation polyimides. Known polyimides, including some with the 6F connecting linkage, were also prepared for comparison purposes. The new 3F containing polymers and the comparison polymers were prepared by condensation polymerization via the traditional amic-acid polymerization method in N,N-dimethylacetamide solvent. The solutions were characterized by determining their inherent viscosities and then were thermally converted into polyimide films under nitrogen atmosphere at 300 to 500 C, usually 350 C. The T sub g's of the films and resin discs were then determined by thermomechanical analysis and were correlated as a function of the final processing temperatures of the films and resin discs. The results showed that similarities existed in the T sub g's depending on the nature of the connecting linkage in the monomers used to prepare the condensation polyimides.

Alston, W. B.↗

Lightning strikes to a NASA airplane penetrating thunderstorms at low altitudes

The NASA Storm Hazards program was dedicated during the 1984 storm season to a study of lightning strikes on an instrumented F-106B aircraft, during penetrations of thunderstorms at altitudes lower than the 6-8 km center of lightning flash density. These altitudes coincide with the negative charge region of thunderstorms. An analysis of the correlation between the UHF band radar data obtained and TV images of lightning strikes indicates that, with a known aircraft position relative to the radar, the lightning channel motion can be adequately interpreted on the basis of radar echo evolution.

Mazur, V.↗

Analysis of planetary evolution with emphasis on differentiation and dynamics

In order to address the early stages of nebula evolution, a three-dimensional collapse code which includes not only hydrodynamics and radiative transfer, but also the effects of ionization and, possibly, magnetic fields is being addressed. As part of the examination of solar system evolution, an N-body code was developed which describes the latter stages of planet formation from the accretion of planetesimals. To test the code for accuracy and run-time efficiency, and to develop a stronger theoretical foundation, problems were studied in orbital dynamics. A regional analysis of the correlation in the gravity and topography fields of Venus was performed in order to determine the small and intermediate scale subsurface structure.

Kaula, William M.↗

Net ozone photochemical production over the eastern and central North Pacific as inferred from GTE/CITE 1 observations during fall 1983

The role of photochemistry in the budget of tropospheric ozone is studied. Measurements of O3, NO, CO, H2O vapor, and temperature obtained during the fall of 1983 during the GTE/CITE project over the eastern and central North Pacific Ocean are analyzed. The effect of altitude on the measurements is discussed. The analysis reveals a correlation between ozone and NO levels; both increase in concentration and variability with altitude. It is observed that an additional source of secondary importance associated wih CO-rich air parcels exists. A photochemical model is utilized to calculate the net rate of ozone production by photochemical reactions. A net photochemical source of ozone in the free troposphere and a net sink in the boundary layer are detected. The relation between the ozone source in the free troposphere and NO is examined. It is estimated that photochemistry provides a net ozone source to the free troposphere overlying the eastern and central North Pacific Ocean of about 5 x 10 to the 10th molecules/sq cm sec and a net sink of ozone to the boundary layer overlying this region of about 3 x 10 to the 10th molecules/sq cm sec.

Chameides, W. L.↗

A modified ATI technique for nowcasting convective rain volumes over areas

This paper explores the applicability of the area-time-integral (ATI) technique for the estimation of the growth portion only of a convective storm (while the rain volume is computed using the entire life history of the event) and for nowcasting the total rain volume of a convective system at the stage of its maximum development. For these purposes, the ATIs were computed from the digital radar data (for 1981-1982) from the North Dakota Cloud Modification Project, using the maximum echo area (ATIA) no less than 25 dBz, the maximum reflectivity, and the maximum echo height as the end of the growth portion of the convective event. Linear regression analysis demonstrated that correlations between total rain volume or the maximum rain volume versus ATIA were the strongest. The uncertainties obtained were comparable to the uncertainties which typically occur in rain volume estimates obtained from radar data employing Z-R conversion followed by space and time integration. This demonstrates that the total rain volume of a storm can be nowcasted at its maximum stage of development.

Makarau, Amos↗

Observations of the 30-60 day oscillation in zonal mean atmospheric angular momentum and high cloud cover

Zonally averaged momentum and high-cloud data were analyzed for the periods of April-October 1979 and November 1982-October 1983 periods. The analysis yielded belt correlation fields implying a symmetry and propagation of momentum out of the tropics in the momentum data and an asymmetrical oscillation across the equatorial zone in the high-cloud data. The 30-60 day oscillation was found to be the dominant periodicity in tropical and subtropical belts in both the momentum and cloud fields, with variation of time spectra evident between 1979 and 1983. The lag correlations between high cloud belts and momentum belts showed strong correlations with the 30-60 day oscillation present. Anomalously high/low zonal mean high cloudiness in the tropics was accompanied by anomalously high/low zonal mean momentum in the tropics, with the latter anomalies subsequently propagating into midlatitudes.

Risbey, James S.↗

Statistical Analysis For Nucleus/Nucleus Collisions

Report describes use of several statistical techniques to charactertize angular distributions of secondary particles emitted in collisions of atomic nuclei in energy range of 24 to 61 GeV per nucleon. Purpose of statistical analysis to determine correlations between intensities of emitted particles and angles comfirming existence of quark/gluon plasma.

Mcguire, Stephen C.↗

The 27-28 October 1986 FIRE Cirrus case study - Retrieval of cloud particle sizes and optical depths from comparative analyses of aircraft and satellite-based infrared measurements

Infrared radiance measurements were acquired from a narrow-field nadir-viewing radiometer based on the NASA ER-2 aircraft during a coincident Landsat 5 overpass on October 28, 1986 as part of the FIRE Cirrus IFO in the vicinity of Lake Michigan. The spectral bandpasses are 9.90-10.87 microns for the ER-2-based radiometer and 10.40-12.50 microns for the Landsat thematic mapper band. After adjusting for spatial and temporal differences, a comparative study using data from these two instruments is undertaken in order to retrieve cirrus cloud ice-crystal sizes and optical depths. Retrieval is achieved by analysis of measurement correlations between the two spectral bands and comparison to multistream radiative transfer model calculations. The results indicate that the equivalent sphere radii of the cirrus ice crystals were typically less than 30 microns. Such particles were too small to be measured by the available in situ instrumentation. Cloud optical depths at a reference wavelength of 11.4 microns ranged from 0.3 to 2.0 for this case study. Supplemental results in support of this study are described using radiation measurements from the King Air aircraft, which was also in near coincidence with the Landsat overpass.

Hammer, Philip D.↗

The Upper Atmosphere Research Satellite (UARS)

The mission and instruments of the Upper Atmosphere Research Satellite (UARS) are discussed. The individual experiments that will measure energy input to the atmosphere, temperature and important trace chemical species, and winds are individually described. The ground system, correlative measurements, data analysis, and theoretical studies are addressed.

Reber, Carl A.↗

Fidelity of a xenon on-axis solar simulator

Xenon on-axis solar simulators are currently used in the thermal vacuum test chambers at NASA Johnson Space Center. These simulators provide a controllable system to closely match the radiation conditions in space. Through a series of alignment procedures, the uniformity, controllability, and spectral distribution of the simulators are certified in order to provide good correlation with theoretical analysis. This certification demonstrates the high fidelity output of the xenon solar simulator.

Laws, Burt A.↗

The NASA/industry Design Analysis Methods for Vibrations (DAMVIBS) program: McDonnell-Douglas Helicopter Company achievements

This paper presents a summary of some of the work performed by McDonnell Douglas Helicopter Company under NASA Langley-sponsored rotorcraft structural dynamics program known as DAMVIBS (Design Analysis Methods for VIBrationS). A set of guidelines which is applicable to dynamic modeling, analysis, testing, and correlation of both helicopter airframes and a large variety of structural finite element models is presented. Utilization of these guidelines and the key features of their applications to vibration modeling of helicopter airframes are discussed. Correlation studies with the test data, together with the development and applications of a set of efficient finite element model checkout procedures, are demonstrated on a large helicopter airframe finite element model. Finally, the lessons learned and the benefits resulting from this program are summarized.

Toossi, Mostafa↗

Periodicities in the IUE particle radiation data

The magnetospheric charged particle flux measured serendipitously by the IUE satellite during perigee passages from 1978 February to 1989 February has been searched for periodicities using Fourier transform and correlation techniques. The analysis uncovers persistent modulations of the particle flux with periods of 28-33 days and 15-17 days. The particle flux seen by IUE in the outer van Allen belt is modulated to a significant extent by the magnetosphere's interaction with high-speed solar wind streams from coronal holes, in agreement with analyses of fluxes at other altitudes and of geomagnetic disturbance indices. It is suggested that recurrent global solar-surface activity, such as the 25.8-day periodicity discussed by Bai and Sturrock (1991) and the solar 'hot spots' reported by Bai (1987, 1988, 1990), may play a role in modulating the particle flux near solar maximum.

Arquilla, Richard↗

Implementation of a noise reduction circuit for spaceflight IR spectrometers

The paper discusses the implementation and analysis of a correlated triple sampling circuit using analog subtractor/integrators. The software and test setup for noise measurements are also described. The correlation circuitry is part of the signal chain for a 256-element InSb line array used in the Visible and Infrared Mapping Spectrometer. Using a focal-plane array (FPA) simulator, system noise measurements of 0.7 DN are obtained. A test setup for FPA/SPE (signal processing electronics) characterization along with noise measurements is demonstrated.

Ramirez, L.↗