Search NASA⌕ Search

SEARCH · Search NASA

Results for “data logging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

STUDYING THE WHIM CONTENT OF LARGE-SCALE STRUCTURES ALONG THE LINE OF SIGHT TO H 2356-309

We make use of a 500 ks Chandra HRC-S/LETG spectrum of the blazar H 2356-309, combined with a lower signal-to-noise ratio (S/N; 100 ks) pilot LETG spectrum of the same target, to search for the presence of warm-hot absorbing gas associated with two large-scale structures (LSSs) crossed by this sight line and to constrain its physical state and geometry. Strong (log N{sub O{sub VII}} {>=} 10{sup 16} cm{sup -2}) O VII K{alpha} absorption associated with a third LSS crossed by this line of sight (the Sculptor Wall (SW)), at z = 0.03, has already been detected in a previous work. Here, we focus on two additional prominent filamentary LSSs along the same line of sight, one at z = 0.062 (the Pisces-Cetus Supercluster (PCS)) and another at z = 0.128 (the 'Farther Sculptor Wall' (FSW)). The combined LETG spectrum has an S/N of {approx}11.6-12.6 per resolution element in the 20-25 A and an average 3{sigma} sensitivity to intervening O VII K{alpha} absorption line equivalent widths (EWs) of EW{sub O{sub VII}} {approx_gt} 14 mA in the available redshift range (z < 0.165). No statistically significant (i.e., {>=}3{sigma}) individual absorption is detected from any of the strong He- or H-like transitions of C, O, and Ne (the most abundant metals in gas with solar-like composition) at the redshifts of the PCS and FSW structures and down to the EW thresholds mentioned above. However, we are still able to constrain the physical and geometrical parameters of the putative absorbing gas associated with these structures, by performing a joint spectral fit of various marginal detections and upper limits of the strongest expected lines with our self-consistent hybrid-ionization WHIM spectral model. At the redshift of the PCS, we identify a warm phase with log T = 5.35{sup +0.07}{sub -0.13} K and log N{sub H} = (19.1 {+-} 0.2) cm{sup -2} possibly co-existing with a much hotter and statistically less significant phase with log T = 6.9{sup +0.1}{sub -0.8} K and log N{sub H} = 20.1{sup +0.3}{sub -1.7} cm{sup -2} (1{sigma} errors). These two separate physical phases are identified through, and mainly constrained by, C V K{alpha} (warm phase) and O VIII K{alpha} (hot phase) absorption, with single line significances of 1.5{sigma} each. For the second LSS, at z {approx_equal} 0.128, only one hot component is hinted in the data, through O VIII K{alpha} (1.6{sigma}) and Ne IX K{alpha} (1.2{sigma}). For this system, we estimate log T = 6.6{sup +0.1}{sub -0.2} K and log N{sub H} = 19.8{sup +0.4}{sub -0.8} cm{sup -2}. Our column density and temperature constraints on the warm-hot gaseous content of these two LSSs, combined with the measurements obtained for the hot gas permeating the SW, allow us to estimate the cumulative number density per unit redshifts of O VII WHIM absorbers at three different EW thresholds of 0.4 mA, 7 mA, and 25.8 mA. This is consistent with expectations only at the very low end of EW thresholds, but exceeds predictions at 7 mA and 25.8 mA (by more than 2{sigma}). We also estimate the cosmological mass density of the WHIM based on the four absorbers we tentatively detect along this line of sight, obtaining {Omega}{sup WHIM}{sub b} = (0.021{sup +0.031}{sub -0.018})(Z/Z{sub sun}){sup -1}, consistent with the cosmological mass density of the intergalactic 'missing baryons' only if we assume high metallicities (Z {approx} Z{sub sun}).

79 ASTRONOMY AND ASTROPHYSICS↗

Determining Stellar Elemental Abundances from DESI Spectra with the Data-driven Payne

Abstract Stellar abundances for a large number of stars provide key information for the study of Galactic formation history. Large spectroscopic surveys such as the Dark Energy Spectroscopic Instrument (DESI) and LAMOST take median-to-low-resolution (R≲ 5000) spectra in the full optical wavelength range for millions of stars. However, the line-blending effect in these spectra causes great challenges for elemental abundance determination. Here we employDD-Payne, a data-driven method regularized by differential spectra from stellar physical models, to the DESI early data release spectra for stellar abundance determination. Our implementation delivers 15 labels, including effective temperatureT eff , surface gravity log g , microturbulence velocityv mic , and the abundances for 12 individual elements, namely C, N, O, Mg, Al, Si, Ca, Ti, Cr, Mn, Fe, and Ni. Given a spectral signal-to-noise ratio of 100 per pixel, the internal precisions of the label estimates are about 20 K forT eff , 0.05 dex for log g , and 0.05 dex for most elemental abundances. These results agree with the theoretical limits from the Crámer–Rao bound calculation within a factor of 2. The majority of the accreted halo stars contributed by the Gaia–Enceladus–Sausage are discernible from the disk and in situ halo populations in the resultant [Mg/Fe]–[Fe/H] and [Al/Fe]–[Fe/H] abundance spaces. We also provide distance and orbital parameters for the sample stars, which spread over a distance out to ∼100 kpc. The DESI sample has a significantly higher fraction of distant (or metal-poor) stars than the other existing spectroscopic surveys, making it a powerful data set for studying the Galactic outskirts. The catalog is publicly available.

Astronomy & Astrophysics↗

An Interactive Multi-instrument Database of Solar Flares

Solar flares are complicated physical phenomena that are observable in a broad range of the electromagnetic spectrum, from radio waves to γ -rays. For a more comprehensive understanding of flares, it is necessary to perform a combined multi-wavelength analysis using observations from many satellites and ground-based observatories. For an efficient data search, integration of different flare lists, and representation of observational data, we have developed the Interactive Multi-Instrument Database of Solar Flares (IMIDSF, https://solarflare.njit.edu/). The web-accessible database is fully functional and allows the user to search for uniquely identified flare events based on their physical descriptors and the availability of observations by a particular set of instruments. Currently, the data from three primary flare lists ( Geostationary Operational Environmental Satellites , RHESSI , and HEK) and a variety of other event catalogs ( Hinode , Fermi GBM, Konus- W IND, the OVSA flare catalogs, the CACTus CME catalog, the Filament eruption catalog) and observing logs ( IRIS and Nobeyama coverage) are integrated, and an additional set of physical descriptors (temperature and emission measure) is provided along with an observing summary, data links, and multi-wavelength light curves for each flare event since 2002 January. We envision that this new tool will allow researchers to significantly speed up the search of events of interest for statistical and case studies.

79 ASTRONOMY AND ASTROPHYSICS↗

A comparative analysis of rawinsonde and NIMBUS 6 and TIROS N satellite profile data

Comparisons are made between rawinsonde and satellite profiles in seven areas for a wide range of surface and weather conditions. Variables considered include temperature, dewpoint temperature, thickness, precipitable water, lapse rate of temperature, stability, geopotential height, mixing ratio, wind direction, wind speed, and kinematic parameters, including vorticity and the advection of vorticity and temperature. In addition, comparisons are made in the form of cross sections and synoptic fields for selected variables. Sounding data from the NIMBUS 6 and TIROS N satellites were used. Geostrophic wind computed from smoothed geopotential heights provided large scale flow patterns that agreed well with the rawinsonde wind fields. Surface wind patterns as well as magnitudes computed by use of the log law to extrapolate wind to a height of 10 m agreed with observations. Results of this study demonstrate rather conclusively that satellite profile data can be used to determine characteristics of large scale systems but that small scale features, such as frontal zones, cannot yet be resolved.

Scoggins, J. R.↗

Coupling fracture facies with in-situ permeability measurements to generate stochastic simulations of tight carbonate aquifer properties: Example from the Lower Cretaceous aquifer, Northern Provence, SE France

The relationships between fracture facies and permeability distribution have been explored using a well-constrained 3D implicit structural model of hemipelagic low porosity/low permeability carbonate from the Northern Provence region, SE France. Fracture and permeability facies were determined using an extensive dataset of 99 hydrogeological wells. Data processing was undertaken using a step-by-step approach, involving: (i) identification of the fracture facies based on well logs detailing structure and stratigraphy; (ii) determination of permeability facies from the a priori correlation between the dimension of the hydraulic radius of influence (deduced from slug test analyses) and the type of reservoir heterogeneity (fissure, fracture, fault zone, etc.); (iii) three dimensional plot of fracture and permeability facies in the geological model using a variographic analysis of data. Thirty-three sequential indicator simulations (SIS) based on geostatistic analyses were realised on both fracture and permeability facies. Finally, a connectivity algorithm was developed to compute the probability of connection between selected infiltration areas and the major aquifer springs via moderate- to high-permeability geological bodies. Key results are: (i) fault zones have a greater role in controlling permeability facies distribution than on fracture facies repartition; (ii) there is little correlation between permeability and fracture facies distributions; (iii) connectivity results highlight the compartmentalisation of aquifers in the Cadarache area, the extensions of permeable geological bodies being limited by the N130 faults.

58 GEOSCIENCES↗

Project HOTSPOT: Kimama Well Borehole Geophysics Database

The Snake River Plain (SRP), Idaho, hosts potential geothermal resources due to elevated groundwater temperatures associated with the thermal anomaly Yellowstone-Snake River hotspot. Project HOTSPOT has coordinated international institutions and organizations to understand subsurface stratigraphy and assess geothermal potential. Over 5.9km of core were drilled from three boreholes within the SRP in an attempt to acquire continuous core documenting the volcanic and sedimentary record of the hotspot: (1) Kimama, (2) Kimberly, and (3) Mountain Home. The Kimama drill site was set up to acquire a continuous record of basaltic volcanism along the central volcanic axis and to test the extent of geothermal resources beneath the Snake River aquifer. Data submitted by project collaborator Doug Schmitt, University of Alberta

15 GEOTHERMAL ENERGY↗

/Scratch as a Cache: Rethinking HPC Center Scratch Storage

To sustain emerging data-intensive scientific applications, High Performance Computing (HPC) centers invest a notable fraction of their operating budget on a specialized fast storage system, scratch space, which is designed for storing the data of currently running and soon-to-run HPC jobs. Instead, it is often used as a standard file system, wherein users arbitrarily store their data, without any consideration to the center's overall performance. To remedy this, centers periodically scan the scratch in an attempt to purge transient and stale data. This practice of supporting a cache workload using a file system and disjoint tools for staging and purging results in suboptimal use of the scratch space. In this paper, we address the above issues by proposing a new perspective, where the HPC scratch space is treated as a cache, and data population, retention, and eviction tools are integrated with scratch management. In our approach, data is moved to the scratch space only when it needed, and unneeded data is removed as soon as possible. We also design a new job-workflow-aware caching policy that leverages user-supplied hints for managing the cache. Our evaluation using three-year job logs from the Jaguar supercomputer, shows that compared to the widely-used purge approach, workflow-aware caching optimizes scratch utilization by reducing the average amount of data read by 9.3%, and by reducing job scheduling delays associated with data staging, on average, by 282.0%.

99 GENERAL AND MISCELLANEOUS↗

IMPROVED Co i log(gf) VALUES AND ABUNDANCE DETERMINATIONS IN THE PHOTOSPHERES OF THE SUN AND METAL-POOR STAR HD 84937

New emission branching fraction measurements for 898 lines of the first spectrum of cobalt (Co i) are determined from hollow cathode lamp spectra recorded with the National Solar Observatory 1 m Fourier transform spectrometer on Kitt Peak, AZ and a high-resolution echelle spectrometer. Published radiative lifetimes from laser induced fluorescence measurements are combined with the branching fractions to determine accurate absolute atomic transition probabilities for the 898 lines. Hyperfine structure (hfs) constants for levels of neutral Co in the literature are surveyed and selected values are used to generate complete hfs component patterns for 195 transitions of Co i. These new laboratory data are applied to determine the Co abundance in the Sun and metal-poor star HD 84937, yielding log ϵ(Co) = 4.955 ± 0.007 (σ = 0.059) based on 82 Co i lines and log ϵ(Co) = 2.785 ± 0.008 (σ = 0.065) based on 66 Co i lines, respectively. A Saha or ionization balance test on the photosphere of HD 84937 is performed using 16 UV lines of Co ii, and good agreement is found with the Co i result in this metal-poor ([Fe i/H] = −2.32, [Fe ii/H] = −2.32) dwarf star. The resulting value of [Co/Fe] = +0.14 supports a rise of Co/Fe at low metallicity that has been suggested in other studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Gamma-ray burst statistics - Guidance or deception?

An evaluation is made of efforts to statistically ascertain the distance scale of gamma-ray bursts. The Venera 11 and 12 KONUS experiment peak count flux P sampling is noted to be incomplete for the longest and shortest bursts. This may be due to the effect being either a real physical limit to the burst population, or an artifact. Current data favor the latter explanation. Where N is the annual rate of bursts with a fluence exceeding S ergs/sq cm, it is shown that an unbounded, isotropic, homogeneous burst source distribution must have d log N/d log P of less than -3/2, for all P independent of any intrinsic P distribution or the existence and relative distance of any separate burst classes. The KONUS data are consistent with earlier conclusions that bursts are distributed on a large galactic scale.

Jennings, M. C.↗

A METHOD FOR MEASURING (SLOPES OF) THE MASS PROFILES OF DWARF SPHEROIDAL GALAXIES

We introduce a method for measuring the slopes of mass profiles within dwarf spheroidal (dSph) galaxies directly from stellar spectroscopic data and without adopting a dark matter halo model. Our method combines two recent results: (1) spherically symmetric, equilibrium Jeans models imply that the product of half-light radius and (squared) stellar velocity dispersion provides an estimate of the mass enclosed within the half-light radius of a dSph stellar component, and (2) some dSphs have chemodynamically distinct stellar subcomponents that independently trace the same gravitational potential. We devise a statistical method that uses measurements of stellar positions, velocities, and spectral indices to distinguish two dSph stellar subcomponents and to estimate their individual half-light radii and velocity dispersions. For a dSph with two detected stellar subcomponents, we obtain estimates of masses enclosed at two discrete points in the same mass profile, immediately defining a slope. Applied to published spectroscopic data, our method distinguishes stellar subcomponents in the Fornax and Sculptor dSphs, for which we measure slopes {Gamma} {identical_to} {Delta}log M/{Delta}log r = 2.61{sup +0.43}{sub -0.37} and {Gamma} = 2.95{sup +0.51}{sub -0.39}, respectively. These values are consistent with 'cores' of constant density within the central few hundred parsecs of each galaxy and rule out 'cuspy' Navarro-Frenk-White (NFW) profiles (dlog M/dlog r {<=} 2 at all radii) with a significance {approx}> 96% and {approx}> 99%, respectively. Tests with synthetic data indicate that our method tends systematically to overestimate the mass of the inner stellar subcomponent to a greater degree than that of the outer stellar subcomponent, and therefore to underestimate the slope {Gamma} (implying that the stated NFW exclusion levels are conservative).

79 ASTRONOMY AND ASTROPHYSICS↗

SU-G-BRB-02: An Open-Source Software Analysis Library for Linear Accelerator Quality Assurance

Purpose: Routine linac quality assurance (QA) tests have become complex enough to require automation of most test analyses. A new data analysis software library was built that allows physicists to automate routine linear accelerator quality assurance tests. The package is open source, code tested, and benchmarked. Methods: Images and data were generated on a TrueBeam linac for the following routine QA tests: VMAT, starshot, CBCT, machine logs, Winston Lutz, and picket fence. The analysis library was built using the general programming language Python. Each test was analyzed with the library algorithms and compared to manual measurements taken at the time of acquisition. Results: VMAT QA results agreed within 0.1% between the library and manual measurements. Machine logs (dynalogs & trajectory logs) were successfully parsed; mechanical axis positions were verified for accuracy and MLC fluence agreed well with EPID measurements. CBCT QA measurements were within 10 HU and 0.2mm where applicable. Winston Lutz isocenter size measurements were within 0.2mm of TrueBeam’s Machine Performance Check. Starshot analysis was within 0.2mm of the Winston Lutz results for the same conditions. Picket fence images with and without a known error showed that the library was capable of detecting MLC offsets within 0.02mm. Conclusion: A new routine QA software library has been benchmarked and is available for use by the community. The library is open-source and extensible for use in larger systems.

43 PARTICLE ACCELERATORS↗

No file left behind - monitoring transfer latencies in PhEDEx

The CMS experiment has to move Petabytes of data among dozens of computing centres with low latency in order to make efficient use of its resources. Transfer operations are well established to achieve the desired level of throughput, but operators lack a system to identify early on transfers that will need manual intervention to reach completion. File transfer latencies are sensitive to the underlying problems in the transfer infrastructure, and their measurement can be used as prompt trigger for preventive actions. For this reason, PhEDEx, the CMS transfer management system, has recently implemented a monitoring system to measure the transfer latencies at the level of individual files. For the first time now, the system can predict the completion time for the transfer of a data set. The operators can detect abnormal patterns in transfer latencies early, and correct the issues while the transfer is still in progress. Statistics are aggregated for blocks of files, recording a historical log to monitor the long-term evolution of transfer latencies, which are used as cumulative metrics to evaluate the performance of the transfer infrastructure, and to plan the global data placement strategy. In this contribution, we present the typical patterns of transfer latencies that may be identified with the latency monitor, and we show how we are able to detect the sources of latency arising from the underlying infrastructure (such as stuck files) which need operator intervention.

Chwalek, T.↗

Further evidence for a supermassive black hole mass-pitch angle relation

We present new and stronger evidence for a previously reported relationship between galactic spiral arm pitch angle P (a measure of the tightness of spiral structure) and the mass M {sub BH} of a disk galaxy's nuclear supermassive black hole (SMBH). We use an improved method to accurately measure the spiral arm pitch angle in disk galaxies to generate quantitative data on this morphological feature for 34 galaxies with directly measured black hole masses. We find a relation of log (M/M {sub ☉}) = (8.21 ± 0.16) – (0.062 ± 0.009)P. This method is compared with other means of estimating black hole mass to determine its effectiveness and usefulness relative to other existing relations. We argue that such a relationship is predicted by leading theories of spiral structure in disk galaxies, including the density wave theory. We propose this relationship as a tool for estimating SMBH masses in disk galaxies. This tool is potentially superior when compared to other methods for this class of galaxy and has the advantage of being unambiguously measurable from imaging data alone.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparing gas composition from fast pyrolysis of live foliage measured in bench-scale and fire-scale experiments

Background: Fire models have used pyrolysis data from oxidising and non-oxidising environments for flaming combustion. In wildland fires pyrolysis, flaming and smouldering combustion typically occur in an oxidising environment (the atmosphere). Aims: Using compositional data analysis methods, determine if the composition of pyrolysis gases measured in non-oxidising and ambient (oxidising) atmospheric conditions were similar. Methods: Permanent gases and tars were measured in a fuel-rich (non-oxidising) environment in a flat flame burner (FFB). Permanent and light hydrocarbon gases were measured for the same fuels heated by a fire flame in ambient atmospheric conditions (oxidising environment). Log-ratio balances of the measured gases common to both environments (CO, CO 2 , CH 4 , H 2 , C 6 H 6 O (phenol), and other gases) were examined by principal components analysis (PCA), canonical discriminant analysis (CDA) and permutational multivariate analysis of variance (PERMANOVA). Key results: Mean composition changed between the non-oxidising and ambient atmosphere samples. PCA showed that flat flame burner (FFB) samples were tightly clustered and distinct from the ambient atmosphere samples. CDA found that the difference between environments was defined by the CO-CO 2 log-ratio balance. PERMANOVA and pairwise comparisons found FFB samples differed from the ambient atmosphere samples which did not differ from each other. Conclusion: Relative composition of these pyrolysis gases differed between the oxidising and non-oxidising environments. This comparison was one of the first comparisons made between bench-scale and field scale pyrolysis measurements using compositional data analysis. Implications: These results indicate the need for more fundamental research on the early time-dependent pyrolysis of vegetation in the presence of oxygen.

54 ENVIRONMENTAL SCIENCES↗

Serial Input Output

Serial Input/Output (SIO) is designed to be a long term storage format of a sophistication somewhere between simple ASCII files and the techniques provided by inter alia Objectivity and Root. The former tend to be low density, information lossy (floating point numbers lose precision) and inflexible. The latter require abstract descriptions of the data with all that that implies in terms of extra complexity. The basic building blocks of SIO are streams, records and blocks. Streams provide the connections between the program and files. The user can define an arbitrary list of streams as required. A given stream must be opened for either reading or writing. SIO does not support read/write streams. If a stream is closed during the execution of a program, it can be reopened in either read or write mode to the same or a different file. Records represent a coherent grouping of data. Records consist of a collection of blocks (see next paragraph). The user can define a variety of records (headers, events, error logs, etc.) and request that any of them be written to any stream. When SIO reads a file, it first decodes the record name and if that record has been defined and unpacking has been requested for it, SIO proceeds to unpack the blocks. Blocks are user provided objects which do the real work of reading/writing the data. The user is responsible for writing the code for these blocks and for identifying these blocks to SIO at run time. To write a collection of blocks, the user must first connect them to a record. The record can then be written to a stream as described above. Note that the same block can be connected to many different records. When SIO reads a record, it scans through the blocks written and calls the corresponding block object (if it has been defined) to decode it. Undefined blocks are skipped. Each of these categories (streams, records and blocks) have some characteristics in common. Every stream, record and block has a name with the condition that each stream, record or block name must be unique in its category (i.e. all streams must have different names, but a stream can have the same name as a record). Each category is an arbitrary length list which is handled by a 'manager' and there is one manager for each category.

99 GENERAL AND MISCELLANEOUS↗

Energy deposition validation results for the evaluated electron data library in FRENSIE - 25357

The Framework for Research in Nuclear Science and Engineering (FRENSIE) is a collection of packages written in C++ that are designed primarily to aid in methods development. A recent development in FRENSIE is the modeling of single scattering electron interactions using the data in the Evaluated Electron Data Library (EEDL) from Lawrence Livermore National Laboratory (LLNL). Preliminary verification and validation (V and V) results using the well-known Lockwood energy deposition experiment and a comparison with MCNP6.2 were performed using several bivariate grid policies (Unit-base, Correlated, Unit-base Correlated), interpolation schemes (lin-lin, log-log, lin-log), and physics options (Coupled and Decoupled Elastic Scattering). The results show an agreement to within 0.5% between MCNP6.2 and FRENSIE when using the same bivariate grid policy (Correlated) and interpolation scheme (log-log). When compared to the experimental results of the Lockwood experiment, it was found that a Unit-base bivariate grid policy, lin-lin interpolation scheme, and lin-log interpolation scheme did not produce accurate results for the energy deposition in test problems. The log-log Correlated and Unit-base Correlated results showed the greatest agreement with the Lockwood experiment. The total energy deposition matched the experimental data to within 3%. Both the Correlated and Unit-base Correlated results had a tendency to estimate a higher energy deposition near the peaks and a lower energy deposition near the tails. The differences between coupled elastic scattering and decoupled scattering models were shown to be more prominent at higher energies with the results of the coupled elastic scattering being more accurate for the peak and less accurate for the tail of the energy deposition profiles. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

100 Gbps multiplexed inter-satellite optical wireless communication system

In this paper, the performance analysis of the inter-satellite optical wireless communication system (IsOWC) is carried out in presence of optical space channel. Here the proposed model is a 16×100 Gbps dense multiplexed IsOWC. The dual polarized quadrature phase shift keying (DP-QPSK) modulation is used for improving the optical signal to noise ratio tolerance of the system. Further, the spectral efficiency and the receiver sensitivity is improved by incorporating the coherent orthogonal frequency division multiplexing (CO-OFDM) technique in the proposed IsOWC system. The performance of the system is evaluated by bit error rate (BER), error vector magnitude percentage, received signal power, constellation diagram. A comparative study has been carried out between different modulation techniques such as quadrature phase shift keying and DP-QPSK used in IsOWC system. It is observed that, an inter-satellite distance of 15,600 km is obtained with the proposed model at 100 Gbps for a targeted forward error correction log of BER value of − 2.42 or BER of 3.8×10{sup −3}. The maximum possible data rate for different inter and intra orbit satellite has been calculated. Also, the maximum possible transceiver distance has been calculated for different data rates. The integration of two advanced technologies such as DP-QPSK modulation with CO-OFDM technique in the proposed model may impel the market demands for high bandwidth intensive and high data rate applications.

42 ENGINEERING↗

Predicting Stability Constants for Uranyl Complexes Using Density Functional Theory

The ability to predict the equilibrium constants for the formation of 1:1 uranyl:ligand complexes (log K 1 values) provides the essential foundation for the rational design of ligands with enhanced uranyl affinity and selectivity. We also use density functional theory (B3LYP) and the IEFPCM continuum solvation model to compute aqueous stability constants for UO 2 2+ complexes with 18 donor ligands. Theoretical calculations permit reasonably good estimates of relative binding strengths, while the absolute log K 1 values are significantly overestimated. Accurate predictions of the absolute log K 1 values (root mean square deviation from experiment < 1.0 for log K 1 values ranging from 0 to 16.8) can be obtained by fitting the experimental data for two groups of mono and divalent negative oxygen donor ligands. The utility of correlations is demonstrated for amidoxime and imide dioxime ligands, providing a useful means of screening for new ligands with strong chelate capability to uranyl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗