Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Effect of Welding Parameters on Junction Structure and Fracture Behavior of Friction-Stir-Welded Joints of 2024 Aluminum Alloys

In this paper, the effect of welding speed and tool rotation speed on the junction structure and fracture behavior of friction-stir-welded joints was investigated with use of 2024 aluminum alloys of 3.2 mm thick. Results show that the formation of junction structure is more affected by tool rotation speed than by welding speed due to the differences of heat input levels. When welding speed is at 100 mm/min and tool rotation speed is in the range of 400-600 r/min, the joint junction structure causes complete bonding with no welding defects. While under improper welding parameters, the junction structure causes the precipitate aggregation on the bonding line and the partial bonding with the appearance of both tunnel defects and kissing bond defects. Meanwhile, the results of tensile tests show that the tensile fracture of all FSW joints occur at the weld center. The failure mode of joints with defects-free junction structure characterized by shear fracture is ductile. While the failure mode of joints with defects-existent junction structure characterized by layered fracture surface is brittle. Furthermore, that heterogeneous microstructure, precipitate aggregation and welding defects converge inside the junction structure is the main factor affecting the tensile properties and fracture behavior of the friction-stir-welded joint.

36 MATERIALS SCIENCE↗

Defect-Driven Oxide Transformations and the Electrochemical Interphase

The redox reaction pathway is crucial to the sustainable production of the fuels and chemicals required for a carbon-neutral society. Our society is becoming increasingly dependent on devices using batteries and electrolyzers, all of which rely on a series of redox reactions. The overall properties of oxide materials make them very well suited for such electrochemical and catalytic applications due to their associated cationic redox properties and the static site-adsorbate interactions. As these technologies have matured, it has become apparent that defect-driven redox reactions, defect-coupled diffusion, and structural transformations that are both time- and rate-dependent are also critical materials processes. This change in focus, considering not only redox properties but also more complex, dynamic behaviors, represents a new research frontier in the molecular sciences as they are strongly linked to device operation and degradation and lie at the heart of various phenomena that take place at electrochemical interfaces. Fundamental studies of the structural, electronic, and chemical transformation mechanisms are key to the advancement of materials and technological innovations that could be implemented in various electrochemical systems. In this Account, we focus on recent studies and advances in characterizing and understanding the dynamic redox evolution and structural transformations that take place in model perovskites and layered oxides under reactive conditions and correlate them with degradation mechanisms and operations in electrolyzers and batteries. We show that the dynamic evolution of oxygen vacancies and cationic migration in the surface or bulk occurs at the solid-liquid interface, using a combination of different synchrotron-based Xray spectroscopies and scattering probes. Detailed redox-structure-reactivity correlation studies show how defects and diffusion processes can be tailored to drive various physical and chemical transformations in electrolyzers and batteries. We also highlight a strong correlation between oxygen redox reactivity and structural reorganization in both model thin films and particles, helping to bridge the gap between fundamental studies of the reaction mechanism and device applications. Finally, on the basis of these findings, we discuss strategies to probe and tune the redox reactivity and structural stability of the redox-active oxide interphase toward devising efficient pathways for energy and chemical harvesting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiation damage evolution in ceramics

A review is presented of recent results on radiation damage production, defect accumulation and dynamic annealing in a number of ceramics, such as silicon carbide, zircon and zirconia. Under energetic particle irradiation, ceramics can undergo amorphization by the accumulation of point defects and defect clusters (silicon carbide) or direct impact amorphization (zircon). Ceramics that resist radiation-induced amorphization have mechanisms to dissipate the primary knock-on atom energy, such as replacement collision sequences that leave the lattice undisturbed and low-energy cation site exchange. The presence of engineered mobile defects, such as structural vacancies in stabilized zirconia, can dynamically anneal radiation damage. Thus, defect engineering is a promising strategy to design radiation tolerance for applications such as nuclear waste disposal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of atomic-scale defects and dopants on phosphorene electronic structure and quantum transport properties

By means of a multi-scale first-principles approach, a description of the local electronic structure of 2D and narrow phosphorene sheets with various types of modifications is presented. Firtly, a rational argument based on the geometry of the pristine and modified P network, and supported by the Wannier functions formalism is introduced to describe a hybridization model of the P atomic orbitals. Ab initio calculations show that non-isoelectronic foreign atoms form quasi-bound states at varying energy levels and create different polarization states depending on the number of valence electrons between P and the doping atom. The quantum transport properties of modified phosphorene ribbons are further described with great accuracy. The distortions on the electronic bands induced by the external species lead to strong backscattering effects on the propagating charge carriers. Depending on the energy of the charge carrier and the type of doping, the conduction may range from the diffusive to the localized regime. Interstitial defects at vacant sites lead to homogeneous transport fingerprints across different types of doping atoms. We suggest that the relatively low values of charge mobility reported in experimental measurements may have its origin in the presence of defects.

36 MATERIALS SCIENCE↗

Ba{sub 2}TeO as an optoelectronic material: First-principles study

The band structure, optical, and defects properties of Ba{sub 2}TeO are systematically investigated using density functional theory with a view to understanding its potential as an optoelectronic or transparent conducting material. Ba{sub 2}TeO crystallizes with tetragonal structure (space group P4/nmm) and with a 2.93 eV optical bandgap [Besara et al., J. Solid State Chem. 222, 60 (2015)]. We find relatively modest band masses for both electrons and holes suggesting applications. Optical properties show infrared-red absorption when doped. This could potentially be useful for combining wavelength filtering and transparent conducting functions. Furthermore, our defect calculations show that Ba{sub 2}TeO is intrinsically p-type conducting under Ba-poor condition. However, the spontaneous formation of the donor defects may constrain the p-type transport properties and would need to be addressed to enable applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect Properties, Anion Ordering, and Photochromic Mechanism in Yttrium Oxyhydride

Yttrium oxyhydride (YHO) undergoes a reversible photochromic transition when exposed to ultraviolet light. However, the mechanism for this transformation is not fully understood, and the structure and precise chemical composition of YHO remain under debate. Here, we use first-principles density functional theory calculations with a hybrid functional to study the structure, chemical stability, and point defect properties of YHO. As experiments have shown, we find that YHO prefers a cubic structure, with H and O anions present in equal concentrations and located on tetrahedral sites. Stoichiometric and ordered YHO is chemically stable, but it has a wide band gap of 5.01 eV, considerably larger than that measured in experiments (2.4–3.8 eV). On the other hand, Y4H10O has a smaller band gap of 2.97 eV and also has a region of chemical stability; thus, the actual material may include some fraction of this H-rich structure. The defect chemistry of YHO is dominated by anionic antisite species (H O and O H ), with hydrogen interstitials (H i ) and vacancies (V H ) also present in reasonably high concentrations. We show that antisite disorder lowers the band gap relative to the perfectly ordered structure, bringing the magnitude of the gap into closer agreement with experiment. Based on our calculations of defect migration and the positions of defect states relative to the band edges, we link the onset of photochromic behavior to the reaction H O – → V O 0 + H i – , which follows photoexcitation of a H O + defect. H i – can subsequently migrate away and be trapped by additional H O + defects, contributing to the persistence of the reaction, while the resultant oxygen vacancy, V O 0 , introduces an occupied defect state that leads to optical absorption at visible wavelengths. Our results can explain reported discrepancies between experimental and computational results for YHO, and they allow us to propose specific atomic-scale processes that can lead to photochromism. In conclusion, understanding these mechanisms is key for unlocking YHO’s application in devices ranging from smart windows and optoelectronics to electrochemical synapses for neural networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Differential conductance and defect states in the heavy-fermion superconductor CeCoIn 5

We demonstrate that the electronic band structure extracted from quasiparticle interference spectroscopy [Nat. Phys. 9, 468 (2013)] and the theoretically computed form of the superconducting gaps [Proc. Natl. Acad. Sci. USA 111, 11663 (2014)] can be used to understand the dI/dV line shape measured in the normal and superconducting state of CeCoIn 5 [Nat. Phys. 9, 474 (2013)]. In particular, the dI/dV line shape, and the spatial structure of defect-induced impurity states, reflects the existence of multiple superconducting gaps of d x 2 –y 2 symmetry. As a result, these results strongly support a recently proposed microscopic origin of the unconventional superconducting state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of point defects on electrochromism in WO3

Using hybrid density functional theory, we investigate the influence on electronic structure of common defects and impurities in tungsten oxide (WO3). As an easily reducible perovskite with the A-site atom missing, high concentrations of foreign dopants and oxygen deficiencies are possible. Our calculations show that both oxygen vacancies and alkali dopants are shallow donors, and we explore the physical origins for this behavior. In particular, we examine whether oxygen vacancies can give rise to localized states or small polarons. Our results show that in crystalline material no such charge localization occurs. We discuss how these results impact electrical conductivity and optical properties.

Peelaers, Hartwin↗

Irradiation responses and defect behavior of single-phase concentrated solid solution alloys

Single-phase concentrated solid solution alloys (SP-CSAs) are newly emerging advanced structural materials, which are defined as multiprincipal element solid solutions. SP-CSAs with more than four components in equimolar or near-equimolar ratios are also referred to as high-entropy alloys due to their high configurational entropy. SP-CSAs are potential structural materials in advanced nuclear energy systems due to their attractive mechanical properties. Therefore many investigations have been carried out to study the irradiation-induced structural damage and defect behavior in SP-CSAs. This paper reviews recent experimental results on the irradiation responses of various SP-CSAs, focusing on the accumulation of irradiation-induced structural damage, void swelling resistance, and solute segregation behavior. In addition, the characteristic defect behavior in SP-CSAs derived from ab initio and molecular dynamics simulations, as well as the challenges in the applications of SP-CSAs for the nuclear energy systems are briefly discussed.

36 MATERIALS SCIENCE↗

Evidence for boron diffusion into sub-stoichiometric MgO (001) barriers in CoFeB/MgO-based magnetic tunnel junctions

Evidence of boron diffusion into the MgO barrier of a CoFeB/MgO based magnetic tunnel junction has been identified using analytical scanning transmission electron microscopy (STEM) and X-ray photoelectron spectroscopy. Structures were deposited by DC/RF-magnetron sputtering, where defective, sub-stoichiometric MgO barriers degrading device performance have been previously mitigated against by deposition of thin Mg layers prior to MgO deposition. We show that despite the protection offered by the Mg layer, disorder in the MgO barrier is still evident by STEM analysis and is a consequence of the oxidation of the Co{sub 40}Fe{sub 40}B{sub 20} surface during MgO deposition. Evidence of boron diffusion from CoFeB into the MgO barrier in the as-deposited and annealed structure is also presented, which in the as-deposited case we suggest results from the defective structures at the barrier interfaces. Annealing at 375 Degree-Sign C results in the presence of B in the trigonal coordination of [BO{sub 3}]{sup 3-} in the MgO barrier and partial crystallization of the top electrode (we presume there is also some boron diffusion into the Ta capping layer). The bottom electrode, however, fails to crystallize and much of the boron is retained in this thicker electrode. A higher annealing temperature or lower initial boron content is required to crystallize the bottom electrode.

36 MATERIALS SCIENCE↗

Selective Antisite Defect Formation in WS 2 Monolayers via Reactive Growth on Dilute W-Au Alloy Substrates

Defects are ubiquitous in 2D materials and can affect the structure and properties of the materials and also introduce new functionalities. Methods to adjust the structure and density of defects during bottom-up synthesis are required to control the growth of 2D materials with tailored optical and electronic properties. In this study, the authors present an Au-assisted chemical vapor deposition approach to selectively form S W and S2 W antisite defects, whereby one or two sulfur atoms substitute for a tungsten atom in WS 2 monolayers. Guided by first-principles calculations, they describe a new method that can maintain tungsten-poor growth conditions relative to sulfur via the low solubility of W atoms in a gold/W alloy, thereby significantly reducing the formation energy of the antisite defects during the growth of WS 2 . The atomic structure and composition of the antisite defects are unambiguously identified by Z-contrast scanning transmission electron microscopy and electron energy-loss spectroscopy, and their total concentration is statistically determined, with levels up to ≈5.0%. Furthermore, scanning tunneling microscopy/spectroscopy measurements and first-principles calculations also verified these antisite defects and revealed the localized defect states in the bandgap of WS 2 monolayers. This bottom-up synthesis method to form antisite defects should apply in the synthesis of other 2D materials.

2D materials↗

A theoretical study of the stability of anionic defects in cubic ZrO 2 at extreme conditions

Using first principles density functional theory calculations, we present a study of the structure, mobility, and the thermodynamic stability of anionic defects in the high-temperature cubic phase of ZrO 2 . Our results suggest that the local structure of an oxygen interstitial depends on the charge state and the cubic symmetry of the anionic sublattice is unstable at 0 K. In addition, the oxygen interstitials and the vacancies exhibit symmetry breaking transitions to low-energy structures with tetragonal distortion of the oxygen sublattice at 0 K. However, the vibrational entropy stabilizes the defect structures with cubic symmetry at 2600–2980 K. The formation free energies of the anionic defects and Gibbs free energy changes associated with different defect reactions are calculated by including the vibrational free energy contributions and the effect of pressure on these defect structures. By analyzing the defect chemistry, we obtain the defect concentrations at finite temperature and pressure conditions using the zero temperature ab initio results as input and find that at low oxygen partial pressures, neutral oxygen vacancies are most dominant and at high oxygen partial pressures, doubly charged anionic defects are dominant. As a result, the relevance of the results to the thermal protective coating capabilities of zirconium-based ceramic composites is elucidated.

36 MATERIALS SCIENCE↗

Single nuclear spin detection and control in a van der Waals material

Optically active spin defects in solids are leading candidates for quantum sensing and quantum networking. Recently, single spin defects were discovered in hexagonal boron nitride (hBN), a layered van der Waals (vdW) material. Owing to its two-dimensional structure, hBN allows spin defects to be positioned closer to target samples than in three-dimensional crystals, making it ideal for atomic-scale quantum sensing, including nuclear magnetic resonance (NMR) of single molecules. However, the chemical structures of these defects remain unknown and detecting a single nuclear spin with a hBN spin defect has been elusive. Here we report the creation of single spin defects in hBN using 13 C ion implantation and the identification of three distinct defect types based on hyperfine interactions. We observed both S = 1/2 and S = 1 spin states within a single hBN spin defect. We demonstrated atomic-scale NMR and coherent control of individual nuclear spins in a vdW material, with a π-gate fidelity up to 99.75% at room temperature. By comparing experimental results with density functional theory (DFT) calculations, we propose chemical structures for these spin defects. Our work advances the understanding of single spin defects in hBN and provides a pathway to enhance quantum sensing using hBN spin defects with nuclear spins as quantum memories.

Quantum metrology↗

Surface modification of multilayer graphene using Ga ion irradiation

The effect of Ga ion irradiation intensity on the surface of multilayer graphene was examined. Using Raman spectroscopy, we determined that the irradiation caused defects in the crystal structure of graphene. The density of defects increased with the increase in dwell times. Furthermore, the strain induced by the irradiation changed the crystallite size and the distance between defects. These defects had the effect of doping the multilayer graphene and increasing its work function. The increase in work function was determined using contact potential difference measurements. The surface morphology of the multilayer graphene changed following irradiation as determined by atomic force microscopy. Additionally, the adhesion between the atomic force microscopy tip and sample increased further indicating that the irradiation had caused surface modification, important for devices that incorporate graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The fine structure of electron irradiation induced EL2-like defects in n-GaAs

Defects induced by electron irradiation in n-GaAs have been studied using deep level transient spectroscopy (DLTS) and Laplace DLTS (L-DLTS). The E{sub 0.83} (EL2) is the only defect observed prior to irradiation. Ru/n-GaAs Schottky diodes were irradiated with high energy electrons from a Sr-90 radionuclide up to a fluence of 2.45 × 10{sup 13} cm{sup −2}. The prominent electron irradiation induced defects, E{sub 0.04}, E{sub 0.14}, E{sub 0.38}, and E{sub 0.63}, were observed together with the metastable E{sub 0.17}. Using L-DLTS, we observed the fine structure of a broad base EL2-like defect peak. This was found to be made up of the E{sub 0.75}, E{sub 0.83}, and E{sub 0.85} defects. Our study reveals that high energy electron irradiation increases the concentration of the E{sub 0.83} defect and introduces a family of defects with electronic properties similar to those of the EL2.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the structure of vanadia supported on ceria nanoshapes

Vanadia supported on ceria nanocrystals with defined surface planes, i.e., ceria nanoshapes including rods, cubes and octahedra were successfully synthesized. The effect of surface structure of these ceria nanoshapes on the structure of surface vanadia species as well as the formation of CeVO4 was investigated in details via in situ visible and UV Raman spectroscopy. The surface vanadia species on ceria nanoshapes evolve from monomeric vanadia to dimeric, trimeric, polymeric vanadia, and eventually crystalline V2O5 and CeVO4 as a function of vanadia loading. As expected, the nanoshaped ceria provides a rather homogeneous platform for anchoring vanadia, especially at low vanadia loading leading to only monomeric species, in contrast to the co-existence of different vanadia species on polycrystalline ceria even at extremely low vanadia loading. The formation of CeVO4 from the reaction between surface vanadia species and ceria was compared on the three ceria nanoshapes with similar surface vanadia density. It was found that both the surface structure and amount of defect sites of the ceria nanoshapes play major roles in the production of CeVO4. The easiest formation of CeVO4 on ceria rods is attributed to the lowest surface oxygen vacancy formation energy and the largest amount of defect sites available on the rods surface.

vanadia ceria nanoshapes Raman surface structure d↗

Nonstoichiometry, point defects and magnetic properties in Sr{sub 2}FeMoO{sub 6-{delta}} double perovskites

The phase stability, nonstoichiometry and point defect chemistry of polycrystalline Sr{sub 2}FeMoO{sub 6-{delta}} (SFMO) was studied by thermogravimety at 1000, 1100, and 1200 Degree-Sign C. Single-phase SFMO exists between -10.2{<=}log pO{sub 2}{<=}-13.7 at 1200 Degree-Sign C. At lower oxygen partial pressure a mass loss signals reductive decomposition. At higher pO{sub 2} a mass gain indicates oxidative decomposition into SrMoO{sub 4} and SrFeO{sub 3-x}. The nonstoichiometry {delta} at 1000, 1100, and 1200 Degree-Sign C was determined as function of pO{sub 2}. SFMO is almost stoichiometric at the upper phase boundary (e.g. {delta}=0.006 at 1200 Degree-Sign C and log pO{sub 2}=-10.2) and becomes more defective with decreasing oxygen partial pressure (e.g. {delta}=0.085 at 1200 Degree-Sign C and log pO{sub 2}=-13.5). Oxygen vacancies are shown to represent majority defects. From the temperature dependence of the oxygen vacancy concentration the defect formation enthalpy was estimated ({Delta}H{sub OV}=253{+-}8 kJ/mol). Samples of different nonstoichiometry {delta} were prepared by quenching from 1200 Degree-Sign C at various pO{sub 2}. An increase of the unit cell volume with increasing defect concentration {delta} was found. The saturation magnetization is reduced with increasing nonstoichiometry {delta}. This demonstrates that in addition to Fe/Mo site disorder, oxygen nonstoichiometry is another source of reduced magnetization values. - Graphical abstract: Nonstoichiometry {delta} of Sr{sub 2}FeMoO{sub 6-{delta}} as function of oxygen partial pressure at 1000, 1100, and 1200 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer Sr{sub 2}FeMoO{sub 6-{delta}} is stable at T=1200 Degree-Sign C at low pO{sub 2} only. Black-Right-Pointing-Pointer Nonstoichiometry {delta} measured at 1200, 1100, and 1000 Degree-Sign C. Black-Right-Pointing-Pointer Increase of oxygen vacancy concentration with lower pO{sub 2}. Black-Right-Pointing-Pointer Reduction of magnetization with increasing nonstoichiometry {delta}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗