Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Mechanical Properties and Microstructure of High-Strength Steel Controlled by Hot Stamping Process

A novel design and manufacturing method, dubbed “precast,” of the cooling system and tools for a hot forming process was proposed in this paper. The integrated structures of the punch and blank holder were determined by analyzing the bending and reverse-bending deformation of the forming parts. The desired crashworthiness performance of an automotive front bumper constructed with this process was obtained by a tailored phase transformation, which generated martensite-bainite in the middle and full martensite transformation in the corner areas. Varying cooling effects in the formed parts caused the highest temperature to be located in the bottom and the lowest on the end of the formed parts. Moreover, the microstructural distributions demonstrated that the bottom possessed a relatively lower content of martensite, while, conversely, the end possessed a higher content. This was precisely the most desired phase distributions for the hot formed parts. For the six-process cycle stamping, the temperatures reached a stable status after an initial rapid increase in the first three process cycles. The microstructural results verified the feasibility of the hot forming tools under multiprocess cycles.

36 MATERIALS SCIENCE↗

Preparation, structural, dielectric and magnetic properties of LaFeO{sub 3}–PbTiO{sub 3} solid solutions

Highlights: ► Solid-solutions of (1−x)LaFeO{sub 3}–(x)PbTiO{sub 3} were synthesized by solid-state reaction. ► XRPD and NPD evidence orthorhombic (x < 0.7) and tetragonal (x > 0.8) crystal structures. ► LaFeO{sub 3}-rich compositions order antiferromagnetically (x < 0.6, G-type structure). ► PbTiO{sub 3}-rich compositions exhibit ferroelectric order (x larger than 0.8). ► Magnetic and dielectric (relaxor) ordering coexist near room-temperature around x = 0.4. -- Abstract: Solid solutions of (1−x)LaFeO{sub 3}–(x)PbTiO{sub 3} (0 < x < 1) have been prepared by conventional solid-state reaction. These complex perovskites have been studied by means of X-ray (XRPD) and neutron powder (NPD) diffraction, complemented with dielectric, magnetic, heat capacity and Mössbauer measurements. Complete solubility in the perovskite series was demonstrated. The NPD and XRPD patterns were successfully refined as orthorhombic (x ≤ 0.7) and tetragonal (x ≥ 0.8). A composition-driven phase transformation occurs within the interval 0.7 < x < 0.8. The samples with x < 0.5 showed evidence of long-range magnetic ordering with an G-type antiferromagnetic arrangement of the magnetic moments of the Fe{sup 3+} cations in the B-site with propagation vector k = (0,0,0). Based on the obtained experimental data, a combined structural and magnetic phase diagram has been constructed. The factors governing the structural, dielectric and magnetic properties of (1−x)LaFeO{sub 3}–(x)PbTiO{sub 3} solid solutions are discussed, as well as their possible multiferroicity.

36 MATERIALS SCIENCE↗

The effect of boron addition on the deformation behavior and microstructure of β-solidify TiAl alloys

Highlights: • Borides could promote the DRX formation to soften TiAl alloys. • Boron addition increases firstly and then stabilizes the deformation activate energy. • The stable region expands with boron increasing in processing maps. • The DRX critical strain increases firstly and then decreases with boron increasing. • DRX softening and strengthening from solid solution and borides influence deformation behavior. - Abstract: The effect of boron addition on the deformation behavior and microstructure of Ti-43Al-6Nb-1Mo -1Cr alloys have been studied in this paper. Boron addition would induce Ti{sub 2}Al(P6{sub 3}/mmc) phase with hexagonal structure formation on the interfaces between TiB and γ phase. TiB would be the obstacles for dislocations slipping and increase the stacking fault energy. Ti{sub 2}Al could also provide the chemical foundation for DRXed γ nucleation and disappear after thermal deformation. Both these two phase could promote DRXed grains nucleation to soften the alloys during thermal deformation. With the strengthen effect of boron solid solution and TiB obstacles, the microstructure evolution, phase transformation and deformation behavior are also discussed and concluded as follow.

36 MATERIALS SCIENCE↗

Optical homodyne detection in view of the joint probability distribution

Optical homodyne detection is examined in view of the joint probability distribution. The usual view is that the relative phase between independent laser fields is localized by photon-number measurements in interference experiments such as homodyne detection. This is why operationally coherent states for laser fields are used in the description of homodyne detection and optical quantum-state tomography. Here, we elucidate these situations by considering the joint probability distribution and the invariance of homodyne detection under the phase transformation of optical fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructural Evolution and Mechanical Properties of Ti-22Al-25Nb (At.%) Orthorhombic Alloy with Three Typical Microstructures

Microstructural evolution, tensile and creep behavior of Ti-22Al-25Nb (at.%) orthorhombic alloy with three typical microstructures were investigated. The three typical microstructures were obtained by different solution and age treatment temperatures and analyzed by the BSE technique. The tensile strengths of the alloy at room temperature and 650 °C were investigated. The creep behaviors of the three typical microstructures were also studied at 650 °C/150 MPa for 100 h in air. The phase transformation mechanisms in creep deformation were also found. The experimental results showed that the formations of the three typical microstructures were decided by the isothermal forging and heat treatment. It was supposed that the high-temperature solution treatment might be dominant for the volume fraction and diameter of the equiaxed particles. While the double age treatment would lead to lamellar O phases. Due to grain refinement strengthening, the equiaxed microstructure presented the best tensile strength and ductility. The fully lamellar microstructure had the best creep resistance than that of other microstructures. In this paper, the phenomenon of creep-induced α{sub 2} phase decomposition was occurred during creep deformation of the equiaxed microstructure.

36 MATERIALS SCIENCE↗

Rechargable xLi{sub 2}MnO{sub 3}·(1 − x)Li{sub 4/3}Mn{sub 5/3}O{sub 4} electrode nanocomposite material as a modification product of chemical manganese dioxide by lithium additives

Highlights: • Li-ion battery cathode preparation procedure included MnO{sub 2} modification by Li-salts with subsequent heat treatment. • Li{sub 4}Mn{sub 5}O{sub 12}, Li{sub 2}MnO{sub 3,} and Li-rich phases form active nanocomposite cathode. • Heat treatment mode is of crucial importance for rechargeability. • Cathode material capacity is 150 mA h g{sup −1} within 2.5–4.5 V. - Abstract: Relatively simple preparation procedure of rechargeable Li-ion battery cathode material via manganese dioxide treatment with Li-containing additive and subsequent calcination has been demonstrated. X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, and atomic force microscopy study were characterisation methods of modification products. Pyrolusite, Li{sub 0.3}MnO{sub 2}, layered Li{sub 2}MnO{sub 3}, and spinel Li{sub 4}Mn{sub 5}O{sub 12} phases were revealed as products of initial ramsdellite phase transformations at temperatures of heat treatment ranging from 360 °C to 600 °C. Optimal temperature of final heat treatment from the point of view of rechargeability and discharge characteristics was 450 °C. Samples heat-treated at 450 °C are characterized by the unique combination of Li{sub 4/3}Mn{sub 5/3}O{sub 4} and Li{sub 2}MnO{sub 3} phase components due to their structural integration, a significant degree of disordering, and sizes of nanocrystallites with Li diffusion path, which is the most favourable for reversibility. The prepared nanocomposite cathode material delivers a capacity of 150 mA h g{sup −1} within 2.5–4.5 V at 0.1 mA discharge.

36 MATERIALS SCIENCE↗

Distinctive Finite Size Effects on the Phase Diagram and Metal-insulator Transitions of Tungsten-doped Vanadium(IV) Oxide

The influence of finite size in altering the phase stabilities of strongly correlated materials gives rise to the interesting prospect of achieving additional tunability of solid-solid phase transitions such as those involved in metal-insulator switching, ferroelectricity, and superconductivity. We note here some distinctive finite size effects on the relative phase stabilities of insulating (monoclinic) and metallic (tetragonal) phases of solid-solution W{sub x}V{sub 1-x}O{sub 2}. Ensemble differential scanning calorimetry and individual nanobelt electrical transport measurements suggest a pronounced hysteresis between metal {yields} insulator and insulator {yields} metal phase transformations. Both transitions are depressed to lower critical temperatures upon the incorporation of substitutional tungsten dopants but the impact on the former transition seems far more prominent. In general, the depression in the critical temperatures upon tungsten doping far exceeds corresponding values for bulk W{sub x}V{sub 1-x}O{sub 2} of the same composition. Notably, the depression in phase transition temperature saturates at a relatively low dopant concentration in the nanobelts, thought to be associated with the specific sites occupied by the tungsten substitutional dopants in these structures. The marked deviations from bulk behavior are rationalized in terms of a percolative model of the phase transition taking into account the nucleation of locally tetragonal domains and enhanced carrier delocalization that accompany W{sup 6+} doping in the W{sub x}V{sub 1-x}O{sub 2} nanobelts.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and formation mechanism of hexagonal yttrium hydroxide fluoride nanobundles

Graphical abstract: The formation of yttrium hydroxide fluorides nanobundles can be expressed as a precipitation transformation from cubic NaYF{sub 4} to hexagonal NaYF{sub 4} and to hexagonal Y(OH){sub 2.02}F{sub 0.98} owing to ion exchange. - Highlights: • Novel Y(OH){sub 2.02}F{sub 0.98} nanobundles have been successfully prepared by hydrothermal method. • The branched nanobundles composed of numerous oriented-attached nanoparticles has been studied. • The growth mechanism is proposed to be ion exchange and precipitation transformation. - Abstract: This article presents the fabrication of hexagonal yttrium hydroxide fluoride nanobundles via one-pot hydrothermal process, using yttrium nitrate, sodium hydroxide and ammonia fluoride as raw materials to react in propanetriol solvent. The X-ray diffraction pattern clearly reveals that the grown product is pure yttrium hydroxide fluoride, namely Y(OH){sub 2.02}F{sub 0.98}. The morphology and microstructure of the synthesized product is testified to be nanobundles composed of numerous oriented-attached nanoparticles as observed from the field emission scanning electron microscopy (FESEM). The chemical composition was analyzed by the energy dispersive spectrum (EDS), confirming the phase transformation of the products which was clearly consistent with the result of XRD analysis. It is proposed that the growth of yttrium hydroxide fluoride nanobundles be attributed to ion exchange and precipitation transformation.

36 MATERIALS SCIENCE↗

Smart Materials Behavior in Phosphates: Role of Hydroxyl Groups and Relevance to Antiwear Films

The elastic properties of materials under high pressure are relevant to the understanding and performance of many systems of current interest, for example, in geology and tribology. Of particular interest is the origin of the dramatic increase in modulus with increasing pressure, a response which is also called 'smart materials behavior.' In this context, simple phosphate-containing materials have been studied experimentally and theoretically, and the origins of this behavior have been associated with factors such as coordination of the cations and changes in the degree of polymerization and hydrogenation of the phosphate units. In the present paper we extend the former analysis on simple metal phosphate model compounds to so-called thermal films, an intermediate stage in the formation of effective antiwear films. The material was produced by heating a commercial zinc dialkyldithiophosphate (ZDDP), a common antiwear additive in lubricating oils, in poly-?-olefin base oil solutions to 150 degrees C, a process known to produce the thermal films. Its structure and equation of state were studied by means of x-ray diffraction and IR synchrotron radiation techniques during compression up to 25 GPa in a diamond anvil cell as well as during the subsequent decompression. As is the case for the simple metal phosphates, we find that the thermal films are relatively soft at low pressures but stiffen rapidly and ultimately amorphize irreversibly at high pressure. However, in addition to phase transformations involving cation sites occurring in the metal phosphates studied previously, thermal films undergo displacive transitions associated with instabilities of the hydroxyl groups. These results may imply that ZDDP ligands and those of the transformed materials not only affect ZDDP decomposition rate in engines but also the mechanical properties of the resulting antiwear films.

43 PARTICLE ACCELERATORS↗

Enhanced performance of room-temperature-grown epitaxial thin films of vanadium dioxide

Stoichiometric vanadium dioxide in bulk, thin film and nanostructured forms exhibits an insulator-to-metal transition (IMT) accompanied by a structural phase transformation, induced by temperature, light, electric fields, doping or strain. We have grown epitaxial films of vanadium dioxide on c-plane (0001) of sapphire using two different procedures involving (1) room temperature growth followed by annealing and (2) direct high temperature growth. Strain at the film-substrate interface due to growth at different temperatures leads to interesting differences in morphologies and phase transition characteristics. Comparison of the morphologies and switching characteristics of the two films shows that contrary to conventional wisdom, the room-temperature grown films have smoother, more continuous morphologies and better switching performance, consistent with the behavior of epitaxially grown semiconductors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Depth-dependent phase change in Gd{sub 2}O{sub 3} epitaxial layers under ion irradiation

Epitaxial Gd{sub 2}O{sub 3} thin layers with the cubic structure were irradiated with 4-MeV Au{sup 2+} ions in the 10{sup 13}–10{sup 15} cm{sup −2} fluence range. X-ray diffraction indicates that ion irradiation induces a cubic to monoclinic phase change. Strikingly, although the energy-deposition profile of the Au{sup 2+} ions is constant over the layer thickness, this phase transformation is depth-dependent, as revealed by a combined X-ray diffraction and ion channeling analysis. In fact, the transition initiates very close to the surface and propagates inwards, which can be explained by an assisted migration process of irradiation-induced defects. This result is promising for developing a method to control the thickness of the rare-earth oxide crystalline phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the improvement of measurement accuracy of retained austenite in steel with X-ray diffraction

Highlights: • Improved procedure to determine austenite in steels with crystallographic texture • Extension to X-ray area detectors • Electropolishing is essential to get correct results. - Abstract: An improved measurement scheme for the determination of the retained austenite fraction with X-ray diffraction is extended to area detectors. The scheme reduces the error due to crystallographic texture in phase analysis of steel by averaging the results of diffraction patterns at different sample positions. The method is based on the standard ASTM E975, but it can be easily extended to other crystal structures, multi-phase materials or X-ray wavelengths. Phase transformation, induced by mechanical sample preparation, may lead to a significant reduction of the retained austenite fraction. Electropolishing before the measurement is beneficial to remove the layer affected by sample preparation.

36 MATERIALS SCIENCE↗

A dual chelating sol–gel synthesis of BaTiO{sub 3} nanoparticles with effective photocatalytic activity for removing humic acid from water

Graphical abstract: The cubic phase BaTiO{sub 3} nanoparticles can be obtained at 600 °C and changed into tetragonal phase at 900 °C by a dual chelating sol–gel method, and the photocatalytic activities of the photocatalysts calcined at different temperatures were investigated by the removal of humic acid (HA) from water under UV light irradiation. Highlights: ► The humic acid in water was firstly degradated by BaTiO{sub 3} photocatalyst. ► The cubic BaTiO{sub 3} was obtained and changed into tetragonal phase at lower temperature. ► The chelating agents had an important influence on the phase formation of BaTiO{sub 3}. ► The tetragonal phase BaTiO{sub 3} calcined at 900 °C exhibited higher photocatalytic activity under UV irradiation. -- Abstract: In this paper, a dual chelating sol–gel method was used to synthesize BaTiO{sub 3} nanoparticles by using acetylacetone and citric acid as chelating agents. The samples calcined at different temperatures were analyzed by thermogravimetric and differential thermal analysis (TG-DTA), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscope (SEM) and UV–vis diffuse reflectance spectra (UV–vis). The results indicated that cubic phase BaTiO{sub 3} nanoparticles about 19.6 nm can be obtained at 600 °C and changed into tetragonal phase at 900 °C about 97.1 nm. All the BaTiO{sub 3} nanoparticles showed effective photocatalytic activities on the removal of humic acid (HA) under UV light irradiation. A comparison of single (acetylacetone or citric acid) and dual chelating (acetylacetone and citric acid) synthetic processes was also studied and the results demonstrated that the dual chelating agents indeed reduced phase transformation temperature from cubic to tetragonal BaTiO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural-Phase Features of Low-Stability Pre-Transitional States of BCC-Alloys with Complexes of Planar Defects (Antiphase Boundaries)

Using the Monte Carlo method, the influence of the complexes of antiphase boundaries (APBs) (a pair of shear APBs and a pair of thermal APBs) on the low-stability, pre-transitional states of BCC-alloys is considered by the example of a conventional copper alloy CuZn and an intermetallic compound NiAl. It is shown that in the region of low-stability structural-phase states the energy of formation of a complex of thermal APBs is higher than that of shear APBs. The contribution of APBs into disordering is appreciable up to the structural-phase transition temperature. The most significant factor in terms of the long-range order is the formation of the defect itself; the differences in the APB type or the plane of their occurrence do not so much affect the longrange order behavior with the temperature variation. The type of APBs however appreciably affects the structural-energy characteristics of the system at the temperatures below the phase transformation temperature. Logically, a system with structural defects is less ordered than a defect-free system. The presence of a defect favors the onset of disordering at lower temperatures: it starts at lower temperatures in the case of thermal APBs (TAPBs) compared to shear APBs (TAPBs). In a BCC-system with a complex of TAPBs the first signs of disordering invariably appear near the phase boundary in the neighborhood of large atoms (Zn–Zn in the CuZn alloy or Al–Al in the NiAl intermetallide). In the alloy with a complex of shear APBs the distortion of ordering at low temperatures is observed in the regions where the boundaries cross. The presence of antiphase boundaries affects the alloy stability under heating. It is shown that disordering is accompanied by smearing of the boundaries and their faceting. It follows from a comparative analysis of the peculiarities of disordering in the BCC-system under study (classical alloy CuZn and intermetallide NiAl) under conditions of higher temperatures in the region of low-stability, pre-transitional states that the order – disorder phase transition in the CuZn alloy takes place as a result of disordering of the system, while in the intermetallide NiAl the change of long-range order results from the structural-phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural resistance of chemically modified 1-D nanostructured titanates in inorganic acid environment

Sodium containing one-dimensional nanostructured layered titanates (1-D NSLT) were produced both from commercial anatase powder and Brazilian natural rutile mineral sands by alkali hydrothermal process. The 1-D NSLT were chemically modified with proton, cobalt or iron via ionic exchange and all products were additionally submitted to intensive inorganic acid aging (pH = 0.5) for 28 days. The morphology and crystal structure transformations of chemically modified 1-D NSLT were followed by transmission electron microscopy, powder X-ray diffraction, selected area electron diffraction and energy dispersive spectroscopy. It was found that the original sodium rich 1-D NSLT and cobalt substituted 1-D NSLT were completely converted to rutile nanoparticles, while the protonated form was transformed in a 70%-30% (by weight) anatase-rutile nanoparticles mixture, very similar to that of the well-known TiO{sub 2}-photocatalyst P25 (Degussa). The iron substituted 1-D NSLT presented better acid resistance as 13% of the original structure and morphology remained, the rest being converted in rutile. A significant amount of remaining 1-D NSLT was also observed after the acid treatment of the product obtained from rutile sand. The results showed that phase transformation of NSLT into titanium dioxide polymorph in inorganic acid conditions were controllable by varying the exchanged cations. Finally, the possibility to transform, through acid aging, 1-D NSLT obtained from Brazilian natural rutile sand into TiO{sub 2}-polymorphs was demonstrated for the first time to the best of authors' knowledge, opening path for producing TiO{sub 2}-nanoproducts with different morphologies through a simple process and from a low cost precursor.

36 MATERIALS SCIENCE↗

Effect of Nano-Y{sub 2}O{sub 3} on Microstructure and Crack Formation in Laser Direct-Deposited In Situ Particle-Reinforced Fe-Based Coatings

In situ hard-particle-reinforced Fe-based composite coatings were prepared on Q235 steel substrates by direct laser deposition using Fe-based alloy powders containing 2 wt.% B, 3 wt.% Si and 1-3 wt.% nano-Y{sub 2}O{sub 3}. The microstructures, phase compositions, hardnesses and wear resistances of the deposited coatings with different nano-Y{sub 2}O{sub 3} contents were studied using metallographic microscopy, scanning electron microscopy, x-ray diffraction, transmission electron microscopy, microhardness tests and pin-on-disk abrasion tests (MMW-1A), respectively. The results showed that the appropriate addition of Y{sub 2}O{sub 3} played a role in grain refinement and in decreasing the number of brittle phases and impurity elements in the grain boundaries. Consequently, the number of cracks in the laser-deposited coating also decreased. The Fe-based composite coatings were mainly composed of α-Fe, γ-Fe and in situ-produced reinforced particle phases, such as Cr{sub 23}C{sub 6}, Cr{sub 7}C{sub 3}, (Cr, Fe){sub 7}C{sub 3}, Fe{sub 2}B, and CrFeB. When the content of nano-Y{sub 2}O{sub 3} was 2 wt.%, a Fe-based composite coating with a thickness of 4 mm that was free of cracks was obtained, and its surface hardness reached 650HV. Moreover, the wear resistance of the coating with 2 wt.% nano-Y{sub 2}O{sub 3} was the best among the samples studied. The presence of nano-Y{sub 2}O{sub 3} increased the solubility of Cr and Si in the solid solution, which eliminated the residual austenite region, and as a result, the phase transformation from γ-Fe to α-Fe was restrained and the transformation stress was also limited, thereby decreasing the probability of cracks in the coatings.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Bulk moduli of Cr[subscript 2]GaC and Ti[subscript 2]GaN up to 50 GPa

Using a synchrotron radiation source and a diamond anvil cell, we measured the pressure dependencies of the lattice parameters of two Ga-containing polycrystalline MAX phases: Ti{sub 2}GaN and Cr{sub 2}GaC. The bulk moduli were calculated to be 189 {+-} 4 and 188 {+-} 5 GPa, respectively. Up to a pressure of about 50 GPa, no phase transformations were observed. Ti{sub 2}GaN compresses more easily along the c-axis, while Cr{sub 2}GaC compresses equally in both directions.

43 PARTICLE ACCELERATORS↗