Recrystallization and martensitic transformation in nanometric grain size Cu-Al-Ni thin films grown by DC sputtering at room temperature
Highlights: • Polycrystalline Cu-Al-Ni thin films with nanometric grain size are grown by DC sputtering. • Influence of thermal annealing process at low temperatures on the microstructure is analyzed. • Strained martensitic transformation is observed for films with grain size average of 30 nm. - Abstract: We report the recrystallization of metastable hexagonal and body centered cubic BCC phase in free-standing 6 μm thick Cu-Al-Ni films grown by DC sputtering at room temperature. The results show that the BCC phase recrystallizes to L2{sub 1} at around 533 K together with precipitation of γ{sub 2}-phase. Annealing temperatures (533 K–623 K) at short times (0–30 min) produce systematic increment of the fraction of γ{sub 2}-phase. Films with phase coexistence of hexagonal, γ{sub 2} and L2{sub 1} structure display temperature driven martensitic transformation. This transformation is observed for samples with austenite grain size of around 30 nm. In all cases, the martensitic transformation temperature (M{sub S}) notoriously decreases (compared to bulk) and systematically increases with the annealing temperatures and annealing time. In addition, the films display extended transformation and retransformation ranges along with asymmetric hysteresis, which may be associated to restitutive forces due to elastic deformations at martensite – martensite and martensite – austenite interfaces. Annealing temperatures above 623 K produce fast precipitation to equilibrium α- and γ{sub 2}-phases. The austenitic phase can be recovered after annealing over 1000 K and fast quenching in ice-water.