Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

A distinct variant of high-titanium mare basalt from the Van Serg core, Apollo 17 landing site

A fragment of basalt picked from the drive tube collected at Van Serg crater at the Apollo 17 landing site has a bulk chemistry more primitive than that of other high-titanium mare basalt groups collected at the site. The sample has a fine-grained olivine phyric, subophitic texture that is distinct from that of other high-titanium basalt samples. The grain size and texture suggest that the sample has a composition close to that of a magma. The crystallization sequence, with appearance of oxide minerals later than in other groups, and other petrographic features such as more-calcic plagioclase and early pigeonite rather than augite, are consistent with this sample representing a distinct variant of Apollo 17 high-titanium basalts. It is not related through closed-system igneous processes to any of the other mare basalt groups identified among Apollo 17 samples. Its characters emphasize the complexity of contemporaneous magma processes on the moon and the heterogeneity of that part of the mantle that was melted.

Ryder, Graham↗

Effect of particle size of Martian dust on the degradation of photovoltaic cell performance

Glass coverglass and SiO2 covered and uncovered silicon photovoltaic (PV) cells were subjected to conditions simulating a Mars dust storm, using the Martian Surface Wind Tunnel, to assess the effect of particle size on the performance of PV cells in the Martian environment. The dust used was an artificial mineral of the approximate elemental composition of Martian soil, which was sorted into four different size ranges. Samples were tested both initially clean and initially dusted. The samples were exposed to clear and dust laden winds, wind velocities varying from 23 to 116 m/s, and attack angles from 0 to 90 deg. It was found that transmittance through the coverglass approximates the power produced by a dusty PV cell. Occultation by the dust was found to dominate the performance degradation for wind velocities below 50 m/s, whereas abrasion dominates the degradation at wind velocities above 85 m/s. Occultation is most severe at 0 deg (parallel to the wind), is less pronounced from 22.5 to 67.5 deg, and is somewhat larger at 90 deg (perpendicular to the wind). Abrasion is negligible at 0 deg, and increases to a maximum at 90 deg. Occultation is more of a problem with small particles, whereas large particles (unless they are agglomerates) cause more abrasion.

Gaier, James R.↗

Estimates of absolute flux and radiance factor of localized regions on Mars in the 2-4 micron wavelength region

IRTF spectrophotometric observations of Mars obtained during the 1986 opposition are the bases for the present estimates of 2.0-4.15 micron absolute flux and radiance factor values. The bright/dark ratios obtained show a wavelength dependence similar to that observed by Bell and Crisp (1991) in 1990, but the spectral contrast for 1986 is lower than in those observations; this difference could be due to changes in the location, sample are size, and/or suspended atmospheric dust.

Roush, Ted L.↗

CHON as a component of dust from Comet Halley

Three sets of particle mass spectra are used here to investigate the relationship between CHON (dust composed predominantly of carbon, hydrogen, oxygen, and nitrogen) and silicate materials in Comet Halley. It is found that there are essentially no pure CHON particles in the 0.1-1 micron size range sampled; instead, essentially all Halley particles sampled by the mass spectrometers are a mixture of both CHON and silicate components. The data show that the CHON and silicate components are interdispersed at submicron scales, and there is evidence that sublimation of volatile organic material occurs, bringing many particles to a common proportion of CHON and silicate material.

Lawler, Mark E.↗

Revised sizes and positions for the Mailyan dwarf galaxy catalog

New positions (good to +/- 15 arcsec), revised sizes, and sample cross-identifications are presented for dwarf galaxies discovered and published by Mailyan (1973, Astrofizika, 9, 33). Of the 104 originally cataloged galaxies we were able to recover only 100, despite an extensive search of the red and blue Palomar Observatory Sky Survey (POSS) prints. Over half of the recovered objects were found to correspond to previously cataloged galaxies; few if any of these are dwarf spheriodal galaxies, but rather mostly dwarf irregulars of low surface brightness.

Madore, B. F.↗

Electro-Optical Design for Efficient Visual Communication

Visual communication, in the form of telephotography and television, for example, can be regarded as efficient only if the amount of information that it conveys about the scene to the observer approaches the maximum possible and the associated cost approaches the minimum possible. Elsewhere we have addressed the problem of assessing the end to end performance of visual communication systems in terms of their efficiency in this sense by integrating the critical limiting factors that constrain image gathering into classical communications theory. We use this approach to assess the electro-optical design of image gathering devices as a function of the f number and apodization of the objective lens and the aperture size and sampling geometry of the phot-detection mechanism. Results show that an image gathering device that is designed to optimize information capacity performs similarly to the human eye. For both, the performance approaches the maximum possible, in terms of the efficiency with which the acquired information can be transmitted as decorrelated data, and the fidelity, sharpness, and clearity with which fine detail can be restored.

Huck, Friedrich O.↗

Temperature and Radiative Heat Flux Measurements in Microgravity Jet Diffusion Flames

The objective of this project is to provide detailed measurements and modeling analyses of local soot concentration, temperature and radiation heat flux distributions in laminar and turbulent jet diffusion flames under normal (1-g) and reduced gravity (0-g) conditions. Results published to date by these co-PI's and their co-workers include: 1. thermophoretic sampling and size and morphological analyses of soot aggregates in laminar flames under normal and reduced gravity conditions; 2. full-field absorption imaging for soot volume fraction maps in laminar and turbulent flames under normal and reduced gravity conditions; 3. an accurate solver module for detailed radiation heat transfer in nongray nonhomogeneous media; 4. a complete model to include flame structure, soot formation and an energy equation to couple with radiation solver.

Ku, Jerry C.↗

Dendritic Growth of Hard-Sphere Crystals

Recent observations of the disorder-order transition for colloidal hard spheres under microgravity revealed dendritic crystallites roughly 1-2 mm in size for samples in the coexistence region of the phase diagram. Order-of-magnitude estimates rationalize the absence of large or dendritic crystals under normal gravity and their stability to annealing in microgravity. A linear stability analysis of the Ackerson and Schaetzel model for crystallization of hard spheres establishes the domain of instability for diffusion-limited growth at small supersaturations. The relationship between hard-sphere and molecular crystal growth is established and exploited to relate the predicted linear instability to the well-developed dendrites observed.

Russel, W. B.↗

Classification of Particle Shapes from Lidar Depolarization Ratios in Convective Ice Clouds Compared to in situ Observations During CRYSTAL-FACE

This manuscript describes a method to class@ cirrus cloud ice particle shape using lidar depolarization measurements as a basis for segregating different particle shape regimes. Measurements from the ER-2 Cloud Physics Lidar (CPL) system during CRYSTAL-FACE provide the basis for this work. While the CPL onboard the ER-2 aircraft was providing remote sensing measurements of cirrus clouds, the Cloud Particle Imager (CPI) onboard the WB-57 aircraft was flying inside those same clouds to sample particle sizes. The results of classifying particle shapes using the CPL data are compared to the in situ measurements made using the CPI , and there is found to be good agreement between the particle shape inferred from the CPL data and that actually measured by the CPI. If proven practical, application of this technique to spaceborne observations could lead to large-scale classification of cirrus cloud particle shapes.

Noel, Vincent↗

On-line technique for measuring stable oxygen and hydrogen isotopes from microliter quantities of water

Detailed here is a method for extracting and analyzing oxygen and hydrogen isotopes from 10 microL-sized water samples. Based on the traditional CO2-H2O equilibration technique, the oxygen isotope exchange reaction is done exclusively in sealed 6-mm (o.d.) Pyrex tubes at 25 degrees C, with full isotope exchange completed in at least 28 h. Using the same water sample employed in the 18O equilibration, D/H extractions are done in separate sealed 6-mm (o.d.) Pyrex tubes by reaction with Zn at 450 degrees C to form H2(g). Provided that a correction factor is applied to 18O analyses, accuracy and precision for both 18O and D/H are comparable to standard techniques using much larger samples.

NASA Center JSC↗

Advanced X-Ray Inspection of Reinforced Carbon Composite Materials on the Orbiter Leading Edge Structural Subsystem (LESS)

The post return-to-flight (RTF) inspection methodology for the Orbiter Leading Edge Structural Subsystem (LESS) is currently being defined. Numerous NDT modalities and techniques are being explored to perform the flight-to-flight inspections of the reinforced carbon/carbon (RCC) composite material for impact damage, general loss of mass in the bulk layers, or other anomalous conditions that would pose risk to safe return upon re-entry. It is possible to have an impact upon ascent that is not visually observable on the surface, yet causes internal damage. Radiographic testing may be a useful NDT technique for such occurrences. The authors have performed radiographic tests on full-sized mock samples of LESS hardware with embedded image quality phantoms. Digitized radiographic film, computed radiography and flat panel digital real-time radiography was acquired using a GE Eresco 200 x-ray tube, and Se-75 and Yb-169 radioisotopes.

Hernandez, Jose M.↗

Variations in Cathodoluminescent Intensity of Spacecraft Materials Exposed to Energetic Electron Bombardment

Many contemporary spacecraft materials exhibit cathodoluminescence when exposed to electron flux from the space plasma environment. A quantitative, physics-based model has been developed to predict the intensity of the glow as a function of incident electron current density and energy, temperature, and intrinsic material properties. We present a comparative study of the absolute spectral radiance for several types of dielectric and composite materials based on this model which spans three orders of magnitude. Variations in intensity are contrasted for different electron environments, different sizes of samples and sample sets, different testing and analysis methods, and data acquired at different test facilities. Together, these results allow us to estimate the accuracy and precision to which laboratory studies may be able to determine the response of spacecraft materials in the actual space environment. It also provides guidance as to the distribution of emissions that may be expected for sets of similar flight hardware under similar environmental conditions.

plasma environment↗

Variations in Cathodoluminescent Intensity of Spacecraft Materials Exposed to Energetic Electron Bombardment

Many contemporary spacecraft materials exhibit cathodoluminescence when exposed to electron flux from the space plasma environment. A quantitative, physics-based model has been developed to predict the intensity of the glow as a function of incident electron current density and energy, temperature, and intrinsic material properties. We present a comparative study of the absolute spectral radiance for several types of dielectric and composite materials based on this model which spans three orders of magnitude. Variations in intensity are contrasted for different electron environments, different sizes of samples and sample sets, different testing and analysis methods, and data acquired at different test facilities. Together, these results allow us to estimate the accuracy and precision to which laboratory studies may be able to determine the response of spacecraft materials in the actual space environment. It also provides guidance as to the distribution of emissions that may be expected for sets of similar flight hardware under similar environmental conditions.

orders of magnitude↗

Persistence Mapping Using EUV Solar Imager Data

We describe a simple image processing technique that is useful for the visualization and depiction of gradually evolving or intermittent structures in solar physics extreme-ultraviolet imagery. The technique is an application of image segmentation, which we call "Persistence Mapping," to isolate extreme values in a data set, and is particularly useful for the problem of capturing phenomena that are evolving in both space and time. While integration or "time-lapse" imaging uses the full sample (of size N ), Persistence Mapping rejects (N - 1)/N of the data set and identifies the most relevant 1/N values using the following rule: if a pixel reaches an extreme value, it retains that value until that value is exceeded. The simplest examples isolate minima and maxima, but any quantile or statistic can be used. This paper demonstrates how the technique has been used to extract the dynamics in long-term evolution of comet tails, erupting material, and EUV dimming regions.

Thompson, B. J.↗

Online Static Load Model Estimation in Distribution Systems

This paper focuses on parameter identification for time-varying voltage-dependent polynomial load models in distribution systems—namely, the constant impedance (Z), constant current (I), and constant power (P). The paper assumes the presence of measurements at the distribution nodes from various sources, each at varying temporal resolutions. The least- squares estimation method with bounded variables is used to convert the measurements into ZIP parameter estimations for loads at various locations on the feeder. The results and discussions focus on some of the estimation issues faced in a distribution system caused by varying voltage sensitivities of loads along a feeder, measurement resolution, impact of window size and sampling rate of measurement data. Finally, the paper uses dynamic simulations data (synthetic high-resolution measurements) to further improve the estimation results.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Chemical Imaging of Atmospheric Organic Particles in the Eastern North Atlantic Field Campaign Report

The ability to reliably predict future climate is hindered, in major part, by an insufficient understanding of atmospheric aerosol-radiation interactions and aerosol-cloud interactions. (IPCC 2013; Bony and Dufresne 2005) Factors affecting marine stratocumulus clouds are particularly important given that they are the dominant cloud type globally. Global climate models frequently misrepresent ubiquitous marine stratocumulus clouds for a variety of reasons, including a lack of understanding of how these cloud properties change with aerosol cloud condensation nuclei (CCN) concentration and composition.(Nam et al. 2012) Limited information is available regarding the sources of CCN in remote regions where marine stratocumulus clouds dominate. Measurements in these marine locations, which are periodically influenced by anthropogenic emissions, provide additional opportunity to study the impact of humans on cloud characteristics. The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility Eastern North Atlantic (ENA) observatory on Graciosa Island in the Azores is well suited to study these problems. The ENA site is exposed to a multitude of air masses as well as a variety of cloud regimes, as documented by passive and active satellite cloud retrieval. (Tselioudis et al. 2013) Thus, placing detailed aerosol and cloud measurements at the ARM ENA site may help gain a better understanding of the CCN budget and cloud interactions in remote environments. To provide detailed information on aerosol morphology, composition, and microphysical properties, size- segregated sampling was carried out at the ENA observatory on Graciosa Island during two intensive operating periods (IOPs). IOP1 occurred from June 17 to July 18, 2017, and IOP2 occurred from January 9 to February 21, 2018. Daytime and nighttime sampling were carried out separately to investigate any diurnal differences of aerosol composition due to differing meteorology. For both IOPs, a micro-orifice uniform deposit impactor (MOUDI) was used to collect particles for microscopic and microphysical analysis. A variety of microscopic substrates (formvar coated copper grids, silicon chips, silicon nitride windows, or molybdenum substrates) were used. Microscopic chemical characterization was carried out using computer-controlled scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (CCSEM-EDX) and the synchrotron-based scanning transmission X-ray microscopy coupled with near-edge X-ray absorption spectroscopy (STXM-NEXAFS). (Laskin et al. 2006; Kilcoyne et al. 2003; Moffet et al. 2010) Two light sources were used for this analysis: 1) the Advanced Light Source at Lawrence Berkeley National Laboratory, and 2) The Canadian Light Source.

Eastern North Atlantic, ACE-ENA field campaign, Gr↗