Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural reliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Heat-and-Mass Transfer Intensification in Saturated-Steam Generators in NPP with VVER as a Means for Increasing Efficiency and Reliability

The intensification of steam generation in combination with improvement of the temperature regime, specifically, with the elimination of temperature fluctuations of the loaded components of the apparatus (heat-exchange tubes, warming-medium headers) increases the steam-generation capacity and eliminates the factors causing damage to the structural elements of steam generators. The possibility of intensifying heat-and-mass transfer on the basis of the experience gained in operating steam generators in NPP with VVER (horizontal) and NPP in foreign countries (vertical) is examined. It is concluded on the basis of the analysis that it is expedient to develop a domestically produced apparatus of the vertical type, which will make possible well-founded production of steam generators for NPP with VVER in the future.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An adaptive interpolation scheme for molecular potential energy surfaces

The calculation of potential energy surfaces for quantum dynamics can be a time consuming task—especially when a high level of theory for the electronic structure calculation is required. We propose an adaptive interpolation algorithm based on polyharmonic splines combined with a partition of unity approach. The adaptive node refinement allows to greatly reduce the number of sample points by employing a local error estimate. The algorithm and its scaling behavior are evaluated for a model function in 2, 3, and 4 dimensions. The developed algorithm allows for a more rapid and reliable interpolation of a potential energy surface within a given accuracy compared to the non-adaptive version.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Approximate Latent Factor Algorithm for Scenario Selection and Weighting in Transmission Expansion Planning

One major difficulty in transmission expansion planning is selecting the representative scenarios to use to evaluate candidate transmission networks. The variability in demand and renewable generation makes the inclusion of several scenarios critical when calculating reliability and cost, but including too many scenarios in an optimization is computationally intractable. To reduce the number of representative operating conditions needed to obtain an accurate approximation of the system, we propose a method rooted in multivariate statistics that exploits the latent correlative structure between different scenarios and network configurations. The proposed algorithm includes an objective and rigorous way to select a subset of scenarios that provide as much information about the system as possible, and a method to accurately approximate the system cost from that scenario subset. The result is a set of scenarios and weights that are easily incorporated into traditional transmission expansion planning formulations. We apply this to a 312-bus WECC model with 8,736 distinct operating conditions. The transmission plans found with the proposed method are more reliable and have a lower total cost than those from other scenario reduction techniques, as well as a smaller error between the expected system performance from the optimization objective and the actual system performance.

42 ENGINEERING↗

Fine and hyperfine structure of the muonic {sup 3}He ion

On the basis of quasipotential approach to the bound state problem in QED we calculate the vacuum polarization, relativistic, recoil, structure corrections of orders {alpha}{sup 5} and {alpha}{sup 6} to the fine structure interval {Delta}E{sup fs} = E(2P{sub 3/2}) - E(2P{sub 1/2}) and to the hyperfine structure of the energy levels 2P{sub 1/2} and 2P{sub 3/2} in muonic {sub 2}{sup 3}He ion. The resulting values {Delta}E{sup fs} = 144 803.15 {mu}eV, {Delta} E-tilde{sup hfs}(2P{sub 1/2}) = -58 712.90 {mu}eV, {Delta} E-tilde{sup hfs}(2P{sub 3/2}) = -24 290.69 {mu}eV provide reliable guidelines in performing a comparison with the relevant experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Low-power resistive random access memory by confining the formation of conducting filaments

Owing to their small physical size and low power consumption, resistive random access memory (RRAM) devices are potential for future memory and logic applications in microelectronics. In this study, a new resistive switching material structure, TiO{sub x}/silver nanoparticles/TiO{sub x}/AlTiO{sub x}, fabricated between the fluorine-doped tin oxide bottom electrode and the indium tin oxide top electrode is demonstrated. The device exhibits excellent memory performances, such as low operation voltage (<±1 V), low operation power, small variation in resistance, reliable data retention, and a large memory window. The current-voltage measurement shows that the conducting mechanism in the device at the high resistance state is via electron hopping between oxygen vacancies in the resistive switching material. When the device is switched to the low resistance state, conducting filaments are formed in the resistive switching material as a result of accumulation of oxygen vacancies. The bottom AlTiO{sub x} layer in the device structure limits the formation of conducting filaments; therefore, the current and power consumption of device operation are significantly reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SLIM, Short-pulse Technology for High Gradient Induction Accelerators

The conclusions of this paper are: (1) The gradient of the SLIM-based technology is believed to be achievable in the same range as it is for the gradient of a modern rf-linac technology ({approx}100 MeV per meter). (2) The SLIM concept is based on the nsec TEM pulse mode operation with no laser or rf systems. (3) Main components of SLIM are not stressed while the energy is pumped into the induction system. Components can accept the hard environment conditions such as a radiation dose, mismatch, hard electromagnetic nose level, etc. Only for several nanoseconds the switch is OFF and produces a stress in the induction system. At that time, the delivery of energy to the beam takes place. (4) The energy in the induction system initially is storied in the magnetic field when the switch is ON. That fact makes another benefit: a low voltage power supplies can be used. The reliability of a lower voltage power supply is higher and they are cheaper. (5) The coreless SLIM concept offers to work in the MHz range of repetition rate. The induction system has the high electric efficiency (much higher than the DWA). (6) The array of lined up and activated SLIM cells is believed to be a solid state structure of novel accelerating technology. The electron-hole plasma in the high power solid state structure is precisely controlled by the electromagnetic process of a pulsed power supply.

43 PARTICLE ACCELERATORS↗

Metal phosphides as potential thermoelectric materials

We report there still exists a crucial need for new thermoelectric materials to efficiently recover waste heat as electrical energy. Although metal phosphides are stable and can exhibit excellent electronic properties, they have traditionally been overlooked as thermoelectrics due to expectations of displaying high thermal conductivity. Based on high-throughput computational screening of the electronic properties of over 48000 inorganic compounds, we find that several metal phosphides offer considerable promise as thermoelectric materials, with excellent potential electronic properties (e.g. due to multiple valley degeneracy). In addition to the electronic band structure, the phonon dispersion curves of various metal phosphides were computed indicating low-frequency acoustic modes that could lead to low thermal conductivity. Several metal phosphides exhibit promising thermoelectric properties. The computed electronic and thermal properties were compared to experiments to test the reliability of the calculations indicating that the predicted thermoelectric properties are semi-quantitative. As a complete experimental study of the thermoelectric properties in MPs, cubic-NiP2 was synthesized and the low predicted lattice thermal conductivity (~1.2 W m -1 K -1 at 700 K) was confirmed. The computed Seebeck coefficient is in agreement with experiments over a range of temperatures and the phononic dispersion curve of c-NiP 2 is consistent with the experimental heat capacity. Finally, the predicted high thermoelectric performance in several metal phosphides and the low thermal conductivity measured in NiP 2 encourage further investigations of thermoelectric properties of metal phosphides.

36 MATERIALS SCIENCE↗

Evaluating Operating System Vulnerability to Memory Errors

Reliability is of great concern to the scalability of extreme-scale systems. Of particular concern are soft errors in main memory, which are a leading cause of failures on current systems and are predicted to be the leading cause on future systems. While great effort has gone into designing algorithms and applications that can continue to make progress in the presence of these errors without restarting, the most critical software running on a node, the operating system (OS), is currently left relatively unprotected. OS resiliency is of particular importance because, though this software typically represents a small footprint of a compute node's physical memory, recent studies show more memory errors in this region of memory than the remainder of the system. In this paper, we investigate the soft error vulnerability of two operating systems used in current and future high-performance computing systems: Kitten, the lightweight kernel developed at Sandia National Laboratories, and CLE, a high-performance Linux-based operating system developed by Cray. For each of these platforms, we outline major structures and subsystems that are vulnerable to soft errors and describe methods that could be used to reconstruct damaged state. Our results show the Kitten lightweight operating system may be an easier target to harden against memory errors due to its smaller memory footprint, largely deterministic state, and simpler system structure.

99 GENERAL AND MISCELLANEOUS↗

Wilsonian effective potentials and closed string field theory

We investigate Wilsonian effective field theory as a model for the construction of the tachyon potential and nonperturbative vacua in closed string field theory. In a number of cases we are able to find the effective potential exactly, and observe what appear to be universal features. We find that the effective field theory contains the same nonperturbative vacuum structure as the bare Lagrangian, though this information is encoded less efficiently as the distance scale of the effective field theory is increased. The implication is that closed string field theory plausibly contains information about the nonperturbative vacuum structure of string theory, in spite of its similarities to effective field theory. We also truncate the effective potential at a fixed power of the field and investigate how the global structure of the effective potential may be approximated via Padé resummation. Qualitative comparisons suggest that computation of the eighth to sixteenth order closed string vertex should be enough to obtain reliable results for the closed string field theory action evaluated on the tachyon field.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Correlation approach for quality assurance of additive manufactured parts based on optical metrology

Surface topography and surface finish are two significant factors for evaluating the quality of products in additive manufacturing (AM). AM parts are fabricated layer by layer, which is quite different from traditional formative or subtractive methods. Despite rapid progress in additive manufacturing and associated optical metrology for quality control and in-situ monitoring, limited research has been conducted to investigate the reliability of 3D surface measurement data. The surface topologies scanned by multiple optical systems demonstrated significant differences due to varying sampling mechanisms, resolutions, system noises, etc. The 3D datasets should be trustworthy in order to extract parameters for quality assurance or feedback control from 3D surface measurements. In this paper, we set up new standards to evaluate the reliability of 3D surface measurement data and analyze the variation in the topographical profile. In this study, two non-contact optical methods based on Focus Variation Microscopy (FVM) and Structured Light System (SLS) were adopted to measure the surface topography of the target components. The two optical metrology systems generated two entirely different point cloud datasets. Statistical methods were applied to test the difference between the data obtained from the two systems. By using a data analytics approach for comparison, it was found that the surface roughness estimated from the point cloud data sets of FVM and SLS has no significant difference, though the point cloud data sets were completely different. This paper provides standard validation approach to evaluate the plausibility of metrology data from in-situ real-time surface analysis for process planning of AM.

36 MATERIALS SCIENCE↗

Comparison of Conventional and Constrained Variational Methods for Computing Large-Scale Budgets and Forcing Fields

Analyses of atmospheric heat and moisture budgets serve as an effective tool to study convective characteristics over a region and to provide large-scale forcing fields for various modeling applications. This paper examines two popular methods for computing large-scale atmospheric budgets: the conventional budget method (CBM) using objectively gridded analyses based primarily on radiosonde data and the constrained variational analysis (CVA) approach which supplements vertical profiles of atmospheric fields with measurements at the top of the atmosphere and at the surface to conserve mass, water, energy, and momentum. Successful budget computations are dependent on accurate sampling and analyses of the thermodynamic state of the atmosphere and the divergence field associated with convection and the large-scale circulation that influences it. Utilizing analyses generated from data taken during Dynamics of the Madden-Julian Oscillation (DYNAMO) field campaign conducted over the central Indian Ocean from October to December 2011, we evaluate the merits of these budget approaches and examine their limitations. While many of the shortcomings of the CBM, in particular effects of sampling errors in sounding data, are effectively minimized with CVA, accurate large-scale diagnostics in CVA are dependent on reliable background fields and rainfall constraints. Finally, for the DYNAMO analyses examined, the operational model fields used as the CVA background state provided wind fields that accurately resolved the vertical structure of convection in the vicinity of Gan Island. However, biases in the model thermodynamic fields were somewhat amplified in CVA resulting in a convective environment much weaker than observed.

54 ENVIRONMENTAL SCIENCES↗

First demonstration of an all-solid-state optical cryocooler

Solid-state optical refrigeration uses anti-Stokes fluorescence to cool macroscopic objects to cryogenic temperatures without vibrations. Crystals such as Yb 3+ -doped YLiF 4 (YLF:Yb) have previously been laser-cooled to 91 K. In this study, we show for the first time laser cooling of a payload connected to a cooling crystal. A YLF:Yb crystal was placed inside a Herriott cell and pumped with a 1020-nm laser (47 W) to cool a HgCdTe sensor that is part of a working Fourier Transform Infrared (FTIR) spectrometer to 135 K. This first demonstration of an all-solid-state optical cryocooler was enabled by careful control of the various desired and undesired heat flows. Fluorescence heating of the payload was minimized by using a single-kink YLF thermal link between the YLF:Yb cooling crystal and the copper coldfinger that held the HgCdTe sensor. The adhesive-free bond between YLF and YLF:Yb showed excellent thermal reliability. This laser-cooled assembly was then supported by silica aerogel cylinders inside a vacuum clamshell to minimize undesired conductive and radiative heat loads from the warm surroundings. Our structure can serve as a baseline for future optical cryocooler devices.

47 OTHER INSTRUMENTATION↗

Ab initio investigation of electronic and vibrational contributions to linear and nonlinear dielectric properties of ice

Electronic and vibrational contributions to the static and dynamic (hyper)polarizability tensors of ice XI and model structures of ordinary hexagonal ice have been theoretically investigated. Calculations were carried out by the finite field nuclear relaxation method for periodic systems (FF-NR) recently implemented in the CRYSTAL code, using the coupled-perturbed Kohn-Sham approach (CPKS) for evaluating the required electronic properties. The effect of structure on the static electronic polarizabilities (dielectric constants) and second-hyperpolarizabilities is minimal. On the other hand, the vibrational contributions to the polarizabilities were found to be significant. A reliable evaluation of these (ionic) contributions allows one to discriminate amongst ice phases characterized by different degrees of proton-order, primarily through differences caused by librational motions. Transverse static and dynamic vibrational (hyper)polarizabilities were found by extrapolating calculations for slabs of increasing size, in order to eliminate substantial surface contributions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relativistic resolution-of-the-identity with Cholesky integral decomposition

In this study, we present an efficient integral decomposition approach called the restricted-kinetic-balance resolution-of-the-identity (RKB-RI) algorithm, which utilizes a tunable RI method based on the Cholesky integral decomposition for in-core relativistic quantum chemistry calculations. The RKB-RI algorithm incorporates the restricted-kinetic-balance condition and offers a versatile framework for accurate computations. Notably, the Cholesky integral decomposition is employed not only to approximate symmetric large-component electron repulsion integrals but also those involving small-component basis functions. In addition to comprehensive error analysis, we investigate crucial conditions, such as the kinetic balance condition and variational stability, which underlie the applicability of Dirac relativistic electronic structure theory. Here we compare the computational cost of the RKB-RI approach with the full in-core method to assess its efficiency. To evaluate the accuracy and reliability of the RKB-RI method proposed in this work, we employ actinyl oxides as benchmark systems, leveraging their properties for validation purposes. This investigation provides valuable insights into the capabilities and performance of the RKB-RI algorithm and establishes its potential as a powerful tool in the field of relativistic quantum chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

INTENSITY MAPPING OF THE [C II] FINE STRUCTURE LINE DURING THE EPOCH OF REIONIZATION

The atomic C II fine-structure line is one of the brightest lines in a typical star-forming galaxy spectrum with a luminosity {approx}0.1%-1% of the bolometric luminosity. It is potentially a reliable tracer of the dense gas distribution at high redshifts and could provide an additional probe to the era of reionization. By taking into account the spontaneous, stimulated, and collisional emission of the C II line, we calculate the spin temperature and the mean intensity as a function of the redshift. When averaged over a cosmologically large volume, we find that the C II emission from ionized carbon in individual galaxies is larger than the signal generated by carbon in the intergalactic medium. Assuming that the C II luminosity is proportional to the carbon mass in dark matter halos, we also compute the power spectrum of the C II line intensity at various redshifts. In order to avoid the contamination from CO rotational lines at low redshift when targeting a C II survey at high redshifts, we propose the cross-correlation of C II and 21 cm line emission from high redshifts. To explore the detectability of the C II signal from reionization, we also evaluate the expected errors on the C II power spectrum and C II-21 cm cross power spectrum based on the design of the future millimeter surveys. We note that the C II-21 cm cross power spectrum contains interesting features that capture physics during reionization, including the ionized bubble sizes and the mean ionization fraction, which are challenging to measure from 21 cm data alone. We propose an instrumental concept for the reionization C II experiment targeting the frequency range of {approx}200-300 GHz with 1, 3, and 10 m apertures and a bolometric spectrometer array with 64 independent spectral pixels with about 20,000 bolometers.

79 ASTRONOMY AND ASTROPHYSICS↗

Spatial density fluctuations and selection effects in galaxy redshift surveys

One of the main problems of observational cosmology is to determine the range in which a reliable measurement of galaxy correlations is possible. This corresponds to determining the shape of the correlation function, its possible evolution with redshift and the size and amplitude of large scale structures. Different selection effects, inevitably entering in any observation, introduce important constraints in the measurement of correlations. In the context of galaxy redshift surveys selection effects can be caused by observational techniques and strategies and by implicit assumptions used in the data analysis. Generally all these effects are taken into account by using pair-counting algorithms to measure two-point correlations. We review these methods stressing that they are based on the a-priori assumption that galaxy distribution is spatially homogeneous inside a given sample. We show that, when this assumption is not satisfied by the data, results of the correlation analysis are affected by finite size effects. In order to quantify these effects, we introduce a new method based on the computation of the gradient of galaxy counts along tiny cylinders. We show, by using artificial homogeneous and inhomogeneous point distributions, that this method identifies redshift dependent selection effects and disentangles them from the presence of large scale density fluctuations. We then apply this new method to several redshift catalogs and we find evidence that galaxy distribution, in those samples where selection effects are small enough, is characterized by power-law correlations with exponent γ=0.9 up to 20 Mpc/h followed by a change of slope that, in the range 20–100 Mpc/h, corresponds to a power-law exponent γ=0.25. Whether a crossover to spatial uniformity occurs at ∼ 100 Mpc/h or larger scales cannot be clarified by the present data.

79 ASTRONOMY AND ASTROPHYSICS↗

The ratio method: A new tool to study one-neutron halo nuclei

Recently a new observable to study halo nuclei was introduced, based on the ratio between breakup and elastic angular cross sections. This new observable is shown by the analysis of specific reactions to be independent of the reaction mechanism and to provide nuclear-structure information of the projectile. Here we explore the details of this ratio method, including the sensitivity to binding energy and angular momentum of the projectile. We also study the reliability of the method with breakup energy. Lastly, we provide guidelines and specific examples for experimentalists who wish to apply this method.

74 ATOMIC AND MOLECULAR PHYSICS↗