Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Biaxial Flexural Strength of Poled Lead Zirconate Titanate under High Electric Field with Extended Field Range

In the present work, as-received poled lead zirconate titanate, or PZT 5A, was examined using ball-on-ring (BoR) mechanical testing coupled with an electric field. Electric fields in the range of 4Ec (Ec, coercive field) with controlled loading paths were applied, and mechanical tests at a substantial number of characteristic electric field levels were conducted. Commercial electronic liquid FC-40 was used to prevent the setup from dielectric breakdown under a high electric field. Weibull strength distribution was used to interpret the mechanical strength data. The data showed that the strength levels of the PZT-5A tested under OC (open circuit) in air and in FC-40 were almost the same. It was further revealed that , for the studied cases, the effect of loading history on the biaxial flexural strength of the PZT was significant in -Ec, but not in OC or zero field as well as 4Ec . An asymmetry V curve was observed for the characteristic strength-electric field graph, and the bottom of V curve was located near the negative coercive field. Microscopy analysis showed that surface-located volume-distributed flaws were the strength limiter and responsible for the failure of the tested PZT under electromechanical loadings.

Zhang, Kewei↗

Mechanistic insights into the oxidation behavior of Ni alloys in high-temperature CO 2

We present results of a Ni superalloy oxidized for short times in high purity CO 2 and similarly in Ar containing ≤ 1 ppb O 2 . A detailed analysis of the oxidized surfaces reveals striking similarities for the two exposure environments, suggesting O 2 impurities control the oxidation process in high-temperature CO 2 . Selective oxidation results in Cr-rich oxide layers grown by 2 outward diffusion, while Cr vacancies left in the metal contribute to significant void formation at the oxide/metal interface. Unlike for most of the alloy surface, the oxidation behavior of secondary phase metal carbides is considerably different in the two environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Validation of miniature test specimens for post-irradiation thermal diffusivity measurement

Radioactivity levels for conventional thermal diffusivity test specimens are often prohibitively high for examination with candidate metallic materials, such as tungsten and reduced activation steels for fusion energy. Therefore, in the ongoing Japan–US PHENIX project, irradiation in the high flux isotope reactor (HFIR) was performed with the miniature specimen form of diameter (D) 3 mm × thickness (T) 1/2 mm small disk for thermal diffusivity measurement. In this study, the thermal diffusivity measurement of this miniature specimen is validated using a Netzsch LFA-467 ‘Hyper Flash’ thermal analyzer and ‘graphene nanoplatelets containing agent’. Finally, with careful surface treatment and data analysis, the miniature specimens showed almost the same value as the diameter 10 mm standard specimens.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Size effect characteristics and influences on fatigue behavior of laser powder bed fusion of thin wall GRCop-42 copper alloy

Size effects, influencing a material's strength, elongation, fatigue limit, and longevity, depend on the operative and dominant deformation and failure mechanisms. This study explores the size effects in additive manufactured (AM) GRCop-42 (Cu-4at%Cr-2at%Nb) thin wall structures fabricated via laser-powder bed fusion (L-PBF) and their impact on fatigue life. The influence of internal defects and surface topography on the fatigue life of specimens in both as-built and hot isostatic pressed (HIP) conditions across different thicknesses is investigated. Where micro-computed tomography (μCT) was used to quantify the internal porosity of as-built, pristine HIP'd, and fatigued HIP'd specimens, and laser microscopy was employed to quantify the surface topography of specimens prior to fatigue. Additionally, quasi-static tests were used to establish baseline mechanical properties (i.e. yield strength (YS), ultimate tensile strength (UTS), and elongation) to frame fatigue testing conditions. Results indicate a significant enhancement in fatigue life for HIP'd specimens for both thicknesses, with internal defects depicting a greater impact than surface topography. Furthermore, fractographic analysis suggests that thicker specimens exhibit higher resistance to crack propagation during fatigue testing in the absence of substantial porosity. Thus, the size effects observed on the fatigue life of L-PBF GRCop-42 appears to be dominated by internal defects.

36 MATERIALS SCIENCE↗

Insights into MHC class I peptide loading from the structure of the Tapasin-ERp57 thiol oxidoreductase heterodimer

Tapasin is a glycoprotein critical for loading major histocompatibility complex (MHC) class I molecules with high-affinity peptides. It functions within the multimeric peptide-loading complex (PLC) as a disulfide-linked, stable heterodimer with the thiol oxidoreductase ERp57, and this covalent interaction is required to support optimal PLC activity. Here, we present the 2.6 {angstrom} resolution structure of the tapasin-ERp57 core of the PLC. The structure revealed that tapasin interacts with both ERp57 catalytic domains, accounting for the stability of the heterodimer, and provided an example of a protein disulfide isomerase family member interacting with substrate. Mutational analysis identified a conserved surface on tapasin that interacted with MHC class I molecules and was critical for peptide loading and editing functions of the tapasin-ERp57 heterodimer. By combining the tapasin-ERp57 structure with those of other defined PLC components, we present a molecular model that illuminates the processes involved in MHC class I peptide loading.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of Inconel 625 fabricated using powder-bed-based additive manufacturing technologies

The purpose of this study was to perform a comparative analysis of powder-bed-based additive manufacturing (AM) technologies during the production of metallic components using Inconel 625 powder material. The AM technologies explored in this study include electron beam powder bed fusion (EPBF), laser powder bed fusion (LPBF), and binder jetting technology. Samples were fabricated in two build directions (X and Z build orientations) for this evaluation process, where all specimens underwent a hot isostatic pressing (HIP) post-process. The comparison was made in terms of microstructure and mechanical properties including ultimate tensile strength (UTS), yield strength (YS), percent elongation, and modulus of elasticity (E). Microstructural characterization showed evidence of equiaxed grain formation for binder jetting and LPBF parts, whereas EPBF parts displayed a more columnar grain formation parallel to the build direction. Six specimens were tested per technology, three built in the X orientation and three built in the Z orientation. All six specimens were built in a single run of each AM machine. Results indicated that all three technologies are capable of meeting the minimum requirements of the ASTM F3056-14 standard for parts produced in the X orientation, with properties that are similar to wrought Inconel 625. In the Z orientation, however, only LPBF was able to meet the minimum standard requirements. Through the comparative analysis of the mechanical properties, here this work showed that LPBF outperformed the other technologies in a majority of the evaluated properties, followed by EPBF and binder jetting. An analysis of the fracture surfaces of tensile specimens was also performed, and it indicated ductile fracture (dimple rupture) for the specimens produced with all three of the AM technologies studied. Nevertheless, the characterization also showed certain differences in the fractured surfaces, such as the presence of un-sintered powder particles for the binder jetting processed Inconel 625, or the development of the so called woody structure for the EPBF processed material. This study can be used to determine distinct characteristics between the three powder-bed-based technologies for the fabrication of Inconel 625 that can further include other technologies and materials using similar approaches.

36 MATERIALS SCIENCE↗

Preparation and characterization of Bi-doped TiO{sub 2} and its solar photocatalytic activity for the degradation of isoproturon herbicide

Highlights: {yields} Visible active Bi-TiO{sub 2} photocatalyst preparation and thorough charaterization. {yields} Bi-TiO{sub 2} shows high activity for isoproturon degradation under solar light irradiation. {yields} The spectral response of TiO{sub 2} shifts from UV to visible light region by Bi doping. {yields} Bi{sup 3+{delta}+} species are playing a vital role in minimizing e{sup -}/h{sup +} recombination. -- Abstract: Bi-doped TiO{sub 2} catalyst was prepared by sol-gel method and was characterized by thermo gravimetric analysis (TGA), X-ray diffraction spectra (XRD), X-ray photo electronic spectroscopy (XPS), UV-Vis diffused reflectance spectra (DRS), photoluminescence spectra (PLS), transmission electron microscopy (TEM), energy dispersive analysis of X-rays (EDAX) and BET surface area. The photocatalytic activity of the catalysts were evaluated for the degradation of isoproturon herbicide under solar light irradiation. The UV-Visible DRS of Bi-doped TiO{sub 2} showed red shift in optical absorption. The presence of Bi{sup 3+{delta}+} species are playing a vital role in minimizing the electron hole recombination resulting higher activity compared to bare TiO{sub 2}.

36 MATERIALS SCIENCE↗

A non-destructive method for crack quantification in photovoltaic backsheets under accelerated and real-world exposures

The long-term durability of photovoltaic modules is paramount for the continued growth of the industry. Polymer backsheets are of particular concern since they provide electrical insulation and an environmental barrier. In this paper, 23 freestanding, multilayer backsheets with nine unique material combinations underwent four different weathering exposures under accelerated and real-world conditions. Besides changes in color and gloss, the induced degradation included parallel or mudflat cracks on 11 backsheets, sometimes in combination with delamination or blistering. Similar degradation has been observed in previous studies and is concerning since cracks compromise the mechanical integrity and electrical safety of backsheets. Quantitative parameters are desirable to reliably classify categories of cracks and supply unbiased features for statistical analysis in predictive lifetime models. We developed an analysis technique that utilizes surface profilometry data to quantify the depth, width, area, spacing, and number of cracks. Parameters are automatically extracted from the raw data by an algorithm running on a high performance distributed computing cluster. Our algorithm excelled at characterizing parallel cracks with minimal de-adhesion, and only an estimated 4% of crack detections were false positives. The addition of humidity and temperature variation formed up to three times as many cracks on a photodose basis compared to dry, constant temperature exposures. Cracks in real-world and accelerated exposures propagated to similar depths with equivalent photodoses; however, the number of cracks formed in accelerated exposures was far greater on a photodose basis. Of samples that cracked, the best performing backsheet configuration was polyvinyl fluoride/poly (ethylene-terephthalate)/polyethylene (PVF/PET/PE) while the least durable was PET/PET/ethylene-vinyl acetate. Finally, none of the six PVF/PET/PVF backsheets cracked in any of the exposures.

14 SOLAR ENERGY↗

Tribological behavior of spark plasma sintered Ti 3 SiC 2 MAX phase composites

Ti₃SiC₂ MAX phases are considered promising candidates for tribological applications; but, their low hardness (5-6 GPa) can lead to increased abrasive wear and higher wear rates. This study investigates the effect of incorporating hard SiC particles on microstructure, mechanical, and tribological behavior of Ti₃SiC₂-SiC-based MAX phase composites prepared using spark plasma sintering at 1400 °C, 40 MPa, 15-minute holding time. Phase and microstructural characterization of composites confirmed the formation of Ti₃SiC₂ MAX phase (90%) along with TiC as a minor phase (10%). For Ti₃SiC₂-SiC, homogeneous distribution of SiC grains within Ti₃SiC₂ matrix resulted in increased hardness from ~11.6 GPa to ~14.8 GPa; however, the flexural strength decreased from ~615 MPa to ~597 MPa due to coefficient of thermal expansion mismatch. Tribological behavior of Ti₃SiC₂-SiC MAX phase composites was assessed using unidirectional sliding ball-on-flat tests with a 52100 steel ball at different loads and a constant speed of 0.05 m/s. SiC reinforced composites exhibited a decreased friction coefficient from 0.39 to 0.29 and wear rates comparable to Ti₃SiC₂ (7-10×10⁻³ mm³/N·m). SEM and EDS analysis of the worn surfaces indicated material transfer from the steel ball counter body and its oxidation due to frictional heating, at lower loads (2N and 5N), whereas at higher load (10N), fracture of the transfer layer dominated, with the presence of microcracks, delamination, grain pull-outs, and wear debris. Improved mechanical properties and good adhesion of SiC with Ti₃SiC₂ matrix resulted in reduced microcracks and grain pull-outs, making Ti₃SiC₂-SiC/Steel tribo-pair more suitable for tribological applications.

36 MATERIALS SCIENCE↗

Numerical Analysis of Offshore Wind-Farm-Induced Drag Effects on Coastal Upwelling Dynamics

Wind farms extract momentum from the atmospheric flow, generating wind-speed deficits both within the plant, and extending downstream. When located offshore, these deficits modulate air-sea coupling, potentially impacting coastal upwelling in sensitive regions. We investigate impacts of wind farms on coastal upwelling using kilometre-scale, three-way-coupled simulations with the coupled ocean-atmosphere-wave-sediment transport system for the US West Coast. Wind-farm effects are represented by a generalised turbine drag formulation, an idealised, height-dependent body force whose magnitude is systematically varied. This approach isolates the leading-order fluid-dynamical response in a realistic coastal configuration. The atmospheric adjustment exhibits an approximately linear relation between drag force and wind-speed deficit, with wakes that expand downstream and increase in magnitude as drag increases. An empirical orthogonal function analysis of sea-surface-temperature anomalies reveals the emergence of a canonical dipole pattern under strong drag forcing. Subsurface diagnostics show consistent shoaling of the mixed layer and suppressed upward velocities in areas near wind-farm region, accompanied by compensating enhancements of shoaling closer to the coast. These results identify turbine drag as a control parameter in assessing interactions between wind-farm wake and coastal upwelling and provide scaling relationships for understanding offshore wind-farm effects on the coastal circulation dynamics.

16 TIDAL AND WAVE POWER↗

Application of Micro-XRF for Nuclear Materials Characterization and Problem Solving

Micro-X-ray fluorescence (MXRF) used for >> 20 years To date MXRF has been underutilized for nuclear materials (NM) spatially-resolved elemental characterization. Scanning electron microscopy (SEM) with EDX much more common for NM characterization at a micro scale. But MXRF fills gap for larger 10's microns to cm{sup 2} scales. Will present four interesting NM applications using MXRF. Demonstrated unique value of MXRF for various plutonium applications. Although SEM has much higher resolution, MXRF clearly better for these larger scale samples (especially non-conducting samples). MXRF useful to quickly identify insoluble particles in Pu/Np oxide. MXRF vital to locating HEPA filter Pu particles over cm{sup 2} areas which were then extracted for SEM morphology and particle size distribution analysis. MXRF perfect for surface swipes which are far too large for practical SEM imaging, and loose residue would contaminate SEM vacuum chamber. MXRF imaging of ER Plutonium metal warrants further studies to explore metal elemental heterogeneity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

5-Methoxyquinoline Photobasicity Is Mediated by Water Oxidation

A mechanism explaining the photobasicity of 5-methoxyquinoline (5-MeOQ) is proposed on the basis of nonadiabatic molecular dynamics simulations using time-dependent hybrid density functional theory (TDDFT) and fewest switches surface hopping (SH) and analysis of existing ultrafast spectroscopy experiments. According to the TDDFT-SH simulations, the rate-determining step is hole transfer from photoexcited 5-MeOQ to adjacent water molecules within ~5 ps followed by rapid electron-coupled proton transfer and deactivation to the ground state. This fast redox-catalyzed proton transfer mechanism is consistent with simple thermodynamic arguments, correlated wavefunction calculations, and recent isotope substitution time-resolved fluorescence experiments. Although energetically feasible, direct protonation of 5-MeOQ in the S 1 state appears to be too slow to contribute significantly to 5-MeOQ photobasicity in aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Measurement of the Plane-Strain Modulus of the Solid Electrolyte Interphase on Lithium-Metal Anodes in Ionic Liquid Electrolytes

In this paper, we present an experimental approach for in situ measurement of elastic modulus of the solid electrolyte interphase (SEI), which is formed from reactions between a lithium thin-film [on a polydimethylsiloxane (PDMS) substrate] and a room-temperature ionic liquid (RTIL) electrolyte. The SEI forms under a state of compressive stress, which causes buckling of the sample surface. In situ atomic force microscopy is used to measure the dominant wavelength of the wrinkled surface topography. A mechanics analysis of strain-induced elastic buckling instability of a stiff thin film on a soft substrate is used to determine the plane strain modulus of the SEI from the measured wavelength. The measurements are performed for three RTIL electrolytes: 1-butyl 1-methylpiperidinium bis(trifluoromethylsulfonyl)imide (P 14 TFSI) without any lithium salt, 1.0 M lithium bis(trifluoromethylsulfonyl)imide (Li TFSI) in P 14 TFSI, and 1.0 M lithium bis(fluorosulfonyl)imide (Li FSI) in P 14 TFSI to investigate the influence of lithium salts on the plane strain modulus of the SEI. The measurements yield plane-strain moduli of approximately 1.3 GPa for no-salt P 14 TFSI and approximately 1.6 GPa for 1.0 M Li TFSI in P 14 TFSI and 1.0 M Li FSI in P 14 TFSI. Finally, the experimental technique presented here eliminates some of the uncertainties associated with traditional SEI mechanical characterization approaches and offers a platform to engineer an SEI with desired mechanical properties by approaches that include altering the electrolyte composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superlubricity of Polyalkylene Glycol Aqueous Solutions Enabled by Ultrathin Layered Double Hydroxide Nanosheets

It was previously proved that the existence of a large amount of hydrogen ions in water-based lubricants can easily lead to a superlubric state; however, it was also shown that these hydrogen ions could cause severe corrosion. As part of a large family of attractive clays, layered double hydroxides (LDHs) possess excellent tribological properties in water-based lubrication systems. In the present work, two different kinds of LDHs are dispersed in polyalkylene glycol (PAG) aqueous solutions, in two distinct forms: ultrathin nanosheets (ULDHNS) of ca. 60 nm wide and ca. 1 nm thick (single or double layer) and nanoparticles (LDH-NP) of ca. 19.73 nm wide and ca. 8.68 nm thick. We find that the addition of ULDH-NS greatly shortens (as much as 85%) the running-in period prior to reaching the superlubricity regime and increases the ultimate load-bearing capacity by about four times. As compared to the fluid film thickness of the lubricating PAG solution, their ultrathin longitudinal dimension will not impair or influence the fluid film coverage in the contact zone. The analysis of sliding solid surfaces and the atomic force microscope microscale friction test demonstrate that the adsorption of ULDH-NS enables the sliding solid surfaces to be polished and protected because of their relatively weak interlayer interaction and increased adhesion effect. Owing to their superior tribological properties as lubricant additives, we conclude ultrathin LDH nanosheets hold great potential for enabling liquid superlubricity in industrial applications in the future.

36 MATERIALS SCIENCE↗

Heterostructured Au–Ir Catalysts for Enhanced Oxygen Evolution Reaction

Electrochemical water splitting operated under acidic conditions provides a clean approach to generate hydrogen fuels. Currently, the sluggish kinetics of oxygen evolution reaction (OER) at the anode is a bottleneck limiting the acidic water splitting. Here, we report that the OER activity of Ir, one of the most commonly used OER catalysts, can be boosted by forming phase boundaries with Au. Mixed Au and Ir catalysts were synthesized on carbon paper electrodes, which underwent structural evolution under the OER environment to form an Au-Ir interface-rich structure. Compared with Ir catalyst, which requires an overpotential of ~393 mV to achieve a current density of 10 mA/cm 2 in 0.1 M HClO 4 electrolyte, the evolved Au-Ir catalyst shows a lower overpotential at ~351 mV. X-ray photoelectronic spectrum (XPS) study, in conjunction with electrochemical analysis on the surface-site-normalized activity, reveals that the improved OER performance is due to the presence of Au/Ir interfaces in the catalysts. In addition to Ir, the strategy of accelerating OER via Au/Ir interfaces has been further applied to IrCo, IrNi, and IrCu alloy catalysts. Here, with the broad applicability of the strategy demonstrated, this study opens a new route to design OER catalysts for efficient acidic water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗