Search NASA⌕ Search

SEARCH · Search NASA

Results for “uniform method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Incompressible fluid ellipsoids in halos. I - The second-harmonic oscillations of the Maclaurin spheroids

The structure and stability of Maclaurin spheroids embedded in rigid uniform-density oblate spheroidal halos are determined by the tensor virial-equation method. These spheroid-halo systems can be thought of as crude fluid analogs of disk galaxies with halos. The halos are assumed to have the same center, the same axis of symmetry, and the same equatorial radius as the Maclaurin spheroids. Only halos with lower eccentricity than the Maclaurin spheroids are considered. The dynamic instability of the toroidal (barlike) modes is suppressed when m, the ratio of the halo mass to Maclaurin spheroid mass, is greater than 3 pi/8 for spherical halos and when m is greater than 1/2 for halos congruent to the Maclaurin spheroids. Intermediate halo flattenings yield intermediate critical m-values. On the other hand, a neutral point of the toroidal modes in the rotating and inertial frames occurs for all m and for all allowed halo flattenings. Growth rates for secular instability beyond the neutral point are calculated, and the eigenfrequencies of all second-harmonic modes are given for select cases. The Ostriker-Peebles (1973) conjecture concerning the stability of disk galaxies against barlike perturbations appears to be incorrect.

Durisen, R. H.↗

Spectral vegetation relationships in a tropical rain forest

Jordan's (1969) spectral method of leaf-area index determination from measurements of the transmitted light at the forest floor is evaluated under a wide variety of illumination conditions in the Luquillo Rain Forest of Puerto Rico, using a hand-held radiometer. Previously suggested 'correction factors' for temporal adjustment were found to degrade the data. Quantitative use of the method was found to be restricted to high sun periods. Data collected under uniformly overcast conditions were of greater stability than under clear skies, however, stability was impaired by changes in cloud thickness. Care must be taken to minimize irradiational variability and to adquately sample the spatial variability.

Holben, B. N.↗

Optimization of bonded joints

A procedure for minimizing the elastic shear stress concentration in adhesive lap joints is presented. The proposed method is based upon tapering the adherends to achieve smooth stiffness transitions and uniform shear stresses. Both single and double lap splices are considered, but numerical examples are restricted to the case of double lap joints. Nonisotropic materials and nonoptimum design limitations, such as minimum and maximum thickness adherends, load-line eccentricity, and peel stresses are treated, and typical results are presented.

Ojalvo, I. U.↗

Vacuum MOCVD fabrication of high efficience cells

Vacuum metal-organic-chemical-vapor-deposition (MOCVD) is a new fabrication process with improved safety and easier scalability due to its metal rather than glass construction and its uniform multiport gas injection system. It uses source materials more efficiently than other methods because the vacuum molecular flow conditions allow the high sticking coefficient reactants to reach the substrates as undeflected molecular beams and the hot chamber walls cause the low sticking coefficient reactants to bounce off the walls and interact with the substrates many times. This high source utilization reduces the materials costs power device and substantially decreases the amounts of toxic materials that must be handled as process effluents. The molecular beams allow precise growth control. With improved source purifications, vacuum MOCVD has provided p GaAs layers with 10-micron minority carrier diffusion lengths and GaAs and GaAsSb solar cells with 20% AMO efficiencies at 59X and 99X sunlight concentration ratios. Mechanical stacking has been identified as the quickest, most direct and logical path to stacked multiple-junction solar cells that perform better than the best single-junction devices. The mechanical stack is configured for immediate use in solar arrays and allows interconnections that improve the system end-of-life performance in space.

Partain, L. D.↗

An integrating matrix formulation for buckling of rotating beams including the effects of concentrated masses

The integrating matrix technique of computational mechanics is extended to include the effects of concentrated masses. The stability of a flexible rotating beam with discrete masses is analyzed to determine the critical rotational speeds for buckling in the inplane and out-of-plane directions. In this problem, the beam is subjected to compressive centrifugal forces arising from steady rotation about an axis which does not pass through the clamped end of the beam. To determine the eigenvalues from which stability is assessed, the differential equations of motion are solved numerically by combining the extended integrating matrix method with an eigenanalysis. Stability boundaries for a discrete mass representation of a uniform beam are shown to asymptotically approach the stability boundaries for the corresponding continuous mass beam as the number of concentrated masses is increased. An error in the literature is also noted for the discrete mass problem concerning the behavior of the critical rotational speed for inplane buckling as the radius of rotation of the clamped end of the beam is reduced.

Lakin, William D.↗

Significance of norms and completeness in variational based methods

By means of a simple structural problem, an important requirement often overlooked in practice on the basis functions used in Rayleigh-Ritz-Galerkin type methods is brought into focus. The problem of the static deformation of a uniformly loaded beam is solved variationally by expanding the beam displacement in a Fourier Cosine series. The potential energy functional is rendered stationary subject to the geometric boundary conditions. It is demonstrated that the variational approach does not converge to the true solution. The object is to resolve this paradox, and in so doing, indicate the practical implications of norms and completeness in an appropriate inner product space.

Storch, Joel A.↗

High-frequency techniques for RCS prediction of plate geometries

Radar cross section (RCS) prediction of several rectangular plate geometries is discussed using high-frequency techniques such as the Uniform Theory of Diffraction (UTD) for perfectly conducting and impedance wedges and the Method of Equivalent Currents (MEC). Previous reports have presented detailed solutions to the principal-plane scattering by a perfectly conducting and a coated rectangular plate and nonprincipal-plane scattering by a perfectly conducting plate. These solutions are briefly reviewed and a modified model is presented for the coated plate. Theoretical and experimental data are presented for the perfectly conducting geometries. Agreement between theory and experiment is very good near and at normal incidence. In regions near and at grazing incidence, the disagreement between the data vary according to diffraction distances and angles involved. It is these areas of disagreement which are of extreme interest as an explanation for the disagreement will yield invaluable insight into scattering mechanisms which are not yet identified as major contributors near and at grazing incidence. Areas of disagreement between theory and experiment are identified and examined in an attempt to better understand and predict near-grazing incidence, grazing incidence, and nonprincipal-plane diffractions.

Balanis, Constantine A.↗

Thermal buckling and post-buckling of symmetric composite plates

The thermally induced buckling and postbuckling behavior of square and rectangular simply supported composite plates is examined using the Rayleigh-Ritz method in conjunction with the second variations of the total potential energy. Spatially uniform and nonuniform temperatures and laminates with material axes that are not aligned with the plate edges (skewed material axes) are considered. Results of the analysis are presented in graphic form.

Meyers, C. A.↗

Theoretical study of the design of a catalyst for para to ortho hydrogen conversion

The theory of Petzinger and Scalapino (1973) was thoroughly reviewed, and all of the basic equations for paramagnetic para to ortho hydrogen catalysis re-derived. There are only a few minor phase errors and errors of omission in the description of the theory. Three models (described by Petzinger and Scalapino) for the rate of para to ortho H2 catalysis were worked out, and uniform agreement obtained to within a constant factor of 2 pi. The analytical methods developed in the course of this study were then extended to two new models, which more adequately describe the process of surface catalysis including transfer of hydrogen molecules onto and off of the surface. All five equations for the para to ortho catalytic rate of conversion are described. The two new equations describe the catalytic rate for these models: H2 on the surface is a 2-D gas with lifetime tau; and H2 on the surface is a 2-D liquid undergoing Brownian motion (diffusion) with surface lifetime tau.

Coffman, Robert E.↗

A comparison of three shear test methods for composite materials

A graphite-epoxy composite material system is used to evaluate the performance of three popular shear tests - the 10-deg off-axis, the +/-45-deg tension, and the Iosipescu specimen tested in the modified Wyoming fixture. A comparison of the shear stress-strain response for each test method is made using a conventional strain gage instrument and moire interferometry. The uniformity and purity of the strain fields in the test sections of the specimens are discussed, and the shear responses obtained from each test are presented and compared. It is shown that the shear stress-strain responses obtained by instrumenting only one face of the 90-deg Iosipescu specimen could give erroneous results. The +/-45-deg tensile and 0-deg Iosipescu specimens were not affected by front-to-back face shear strain variations. Correction factors could be applied to bring all responses together, within the limits of the material uniformity, which was itself documented in the moire fringe patterns.

Ho, H.↗

Validating a large geophysical data set: Experiences with satellite-derived cloud parameters

We are validating the global cloud parameters derived from the satellite-borne HIRS2 and MSU atmospheric sounding instrument measurements, and are using the analysis of these data as one prototype for studying large geophysical data sets in general. The HIRS2/MSU data set contains a total of 40 physical parameters, filling 25 MB/day; raw HIRS2/MSU data are available for a period exceeding 10 years. Validation involves developing a quantitative sense for the physical meaning of the derived parameters over the range of environmental conditions sampled. This is accomplished by comparing the spatial and temporal distributions of the derived quantities with similar measurements made using other techniques, and with model results. The data handling needed for this work is possible only with the help of a suite of interactive graphical and numerical analysis tools. Level 3 (gridded) data is the common form in which large data sets of this type are distributed for scientific analysis. We find that Level 3 data is inadequate for the data comparisons required for validation. Level 2 data (individual measurements in geophysical units) is needed. A sampling problem arises when individual measurements, which are not uniformly distributed in space or time, are used for the comparisons. Standard 'interpolation' methods involve fitting the measurements for each data set to surfaces, which are then compared. We are experimenting with formal criteria for selecting geographical regions, based upon the spatial frequency and variability of measurements, that allow us to quantify the uncertainty due to sampling. As part of this project, we are also dealing with ways to keep track of constraints placed on the output by assumptions made in the computer code. The need to work with Level 2 data introduces a number of other data handling issues, such as accessing data files across machine types, meeting large data storage requirements, accessing other validated data sets, processing speed and throughput for interactive graphical work, and problems relating to graphical interfaces.

Kahn, Ralph↗

Metal Matrix Composite LOX Turbopump Housing Via Novel Tool-Less Net-Shape Pressure Infiltration Casting Technology

Metal matrix composites (MMC) offer relatively higher specific strength, specific stiffness, lower coefficient of thermal expansion (CTE) and lower density as compared with conventional alloys. These unique properties make them very attractive for aerospace turbomachinery applications where there is ever increasing emphasis to reduce weight and cost, and to increase engine performance. Through a joint effort between NASA and Metal Matrix Cast Composites, Inc., a complex liquid oxygen (LOX) compatible turbopump housing is being redesigned and manufactured from hybrid (particulate and fibers) Aluminum MMC. To this end, a revolutionary tool-less pressure infiltration casting technology is being perfected. Ceramic preforms for the composite are 3-dimensionally printed using a stereolithography file, acquired from a CAD model. The preforms are then invested into a refractory material and pressure infiltrated with liquid metal. After casting, the refractory material is washed away leaving behind a near net-shape composite part. Benefits of this process include increased composite uniformity, no mold machining, short time from design to part, properties matching traditional methods, ability to make previously impossible to manufacture parts and no size limitations with a newly developed joining technology. The results of materials, manufacturing and design optimizations, preform joining, and sub-element tests will be presented.

Shah, Sandeep↗

Metal Matrix Composite LOX Turbopump Housing Via Novel Tool-Less Net-Shape Pressure Infiltration Casting Technology

Metal matrix composites (MMC) offer relatively higher specific strength, specific stiffness, lower coefficient of thermal expansion (CTE) and lower density as compared with conventional alloys. These unique properties make them very attractive for aerospace turbomachinery applications where there is ever increasing emphasis to reduce weight and cost, and to increase engine performance. Through a joint effort between NASA and Metal Matrix Cast Composites, Inc., a complex liquid oxygen (LOX) compatible turbopump housing is being redesigned and manufactured from hybrid (particulate and Fibers) Aluminum MMC. To this end, a revolutionary tool-less pressure infiltration casting technology is being perfected. Ceramic preforms for the composite are 3-dimensionally printed using a stereolithography file, acquired from a CAD model. The preforms are then invested into a refractory material and pressure infiltrated with liquid metal. After casting, the refractory material is washed away leaving behind a near net-shape composite part. Benefits of this process include increased composite uniformity, no mold machining, short time from design to part properties matching traditional methods, ability to make previously impossible to manufacture parts and no size limitations with a newly developed joining technology. The results of materials, manufacturing and design optimizations, preform joining, and sub element tests will be presented.

Shah, Sandeep↗

Metal Matrix Composite LOX Turbopump Housing Via Novel Tool-less Net-Shape Pressure Infiltration Casting Technology

Metal matrix composites (MMC) offer relatively higher specific strength, specific stiffness, lower coefficient of thermal expansion (CTE) and lower density as compared with conventional alloys. These unique properties make them very attractive for aerospace turbomachinery applications where there is ever increasing emphasis to reduce weight and cost, and to increase engine performance. Through a joint effort between NASA and Metal Matrix Cast Composites, Inc., a complex liquid oxygen (LOX) compatible turbopump housing is being redesigned and manufactured from hybrid (particulate and fibers) Aluminum MMC. To this end, a revolutionary toolless pressure infiltration casting technology is being perfected. Ceramic preforms for the composite are 3-dimensionally printed using a stereolithography file, acquired from a CAD model. The preforms are then invested into a refractory material and pressure infiltrated with liquid metal. After casting, the refractory material is washed away leaving behind a near net-shape composite part. Benefits of this process include increased composite uniformity, no mold machining, short time from design to part, properties matching traditional methods, ability to make previously impossible to manufacture parts and no size limitations with a newly developed joining technology. The results of materials, manufacturing and design optimizations, preform joining, and sub-element tests will be presented.

Shah, Sandeep↗

Cost-Effective TiAl based Materials

Because of their inherent low ductility, TiAl-based materials are difficult to fabricate, especially thin gage titanium gamma aluminide (TiAl) sheet and foil. In this paper, an innovative powder metallurgy approach for producing cost-effective thin gage TiAl sheets (with 356 mm long and 235 mm wide, and a thickness of 0.74, 1.09, 1.55, and 2.34 mm, respectively) is presented. The microstructures and tensile properties at room and elevated temperatures of the thin gage TiAl are studied. Results show that these TiAl sheets have a relatively homogenous chemistry, uniform microstructure, and acceptable mechanical properties. This work demonstrates a cost-effective method for producing both flat products (sheet/foil) and complex chunky parts of TiAl for various advanced applications including aerospace and automotive industries.

Moxson, V. S.↗

Wide scanning spherical antenna

A novel method for calculating the surface shapes for subreflectors in a suboptic assembly of a tri-reflector spherical antenna system is introduced, modeled from a generalization of Galindo-Israel's method of solving partial differential equations to correct for spherical aberration and provide uniform feed to aperture mapping. In a first embodiment, the suboptic assembly moves as a single unit to achieve scan while the main reflector remains stationary. A feed horn is tilted during scan to maintain the illuminated area on the main spherical reflector fixed throughout the scan thereby eliminating the need to oversize the main spherical reflector. In an alternate embodiment, both the main spherical reflector and the suboptic assembly are fixed. A flat mirror is used to create a virtual image of the suboptic assembly. Scan is achieved by rotating the mirror about the spherical center of the main reflector. The feed horn is tilted during scan to maintain the illuminated area on the main spherical reflector fixed throughout the scan.

Shen, Bing↗

Application of Exactly Linearized Error Transport Equations to AIAA CFD Prediction Workshops

The computational fluid dynamics (CFD) prediction workshops sponsored by the AIAA have created invaluable opportunities in which to discuss the predictive capabilities of CFD in areas in which it has struggled, e.g., cruise drag, high-lift, and sonic boom pre diction. While there are many factors that contribute to disagreement between simulated and experimental results, such as modeling or discretization error, quantifying the errors contained in a simulation is important for those who make decisions based on the computational results. The linearized error transport equations (ETE) combined with a truncation error estimate is a method to quantify one source of errors. The ETE are implemented with a complex-step method to provide an exact linearization with minimal source code modifications to CFD and multidisciplinary analysis methods. The equivalency of adjoint and linearized ETE functional error correction is demonstrated. Uniformly refined grids from a series of AIAA prediction workshops demonstrate the utility of ETE for multidisciplinary analysis with a connection between estimated discretization error and (resolved or under-resolved) flow features.

Derlaga, Joseph M.↗

A Practical Guide to Writing a Radiative Transfer Code

Using our decades-long experience in radiative transfer (RT) code development for Earth science, we endeavor to reduce the knowledge gap of bringing RT from theory to code quickly. Despite numerous classic and recent literature, it is still hard to develop anRT code from scratch within a few weeks. It is equally hard to understand, not to mention modify, an existing “monster” RT code, for which the developer is either located remotely or has retired. Following the format of “Numerical Recipes” by Press et al., we collocate in this paper small pieces of necessary theory with corresponding small pieces of RT code. These are arranged in an order that is natural for code development, which is often opposite of the natural order for laying out the theoretical basis. We focus on the transfer of unpolarized monochromatic solar radiation in a plane-parallel atmosphere over a reflecting surface. Both the surface and the atmosphere are homogeneous (uniform) at all directions. The multiple scattering is numerically solved using the deterministic method of Gauss-Seidel iterations. Except for the presented Python-Numba open-source RT code gsit, the paper does not report any new scientific results, but rather serves as an academic demonstration. If development time is an issue or the reader is familiar with basic concepts of RT theory, we recommend proceeding directly to Sec.3 “RT code development.

multiple light scattering↗