Search NASA⌕ Search

SEARCH · Search NASA

Results for “Approximate computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Processing and analysis of data from the University of Chicago experiments on the IMP 4 and 5 spacecraft

Data from the Charged Particle Experiments of the IMP-4 and 5 spacecraft were processed and analyzed from launch through reentry. Approximately 95 percent of all data transmitted was recovered, processed, and analyzed. The computer programming and operational procedures which were developed to perform the processing and analysis of the data are discussed. The scientific results obtained from the analysis of the data are summarized. A bibliography of documents based on these experiments is included.

Simpson, J. A.↗

Slowly oscillating lifting surfaces at subsonic and supersonic speeds.

The paper presents an unsteady aerodynamic influence coefficient method based on the low-frequency approximation. The influence coefficients are of a type which have been used to compute steady flow about wing-body combinations; therefore, the new method may be extended readily to low-frequency unsteady flow about wing-body combinations. The validity of the method is demonstrated by comparisons with numerical results from conventional, unsteady lifting surface methods. The method is valid for arbitrary wings in supersonic flow and for wings of finite span in subsonic flow. The method, when extended to include wing-body-tail interactions, will have important applications for predicting stability, control, and gust response characteristics of large airplanes. Dynamic stability derivatives and pressure distributions are given for several planforms. The comparison with either analytical or other well established numerical methods shows good agreement.-

Brune, G. W.↗

Aplanatic two-mirror telescopes: A systematic study. I - Cassegrainian configuration

A systematic performance analysis of aplanatic Cassegrainian telescopes has been accomplished by means of a ray trace program. The results indicate that the available field angle for a given geometric spot size is, to a very close approximation, a function of the relative back focal distance only. Image curvatures, as computed by third-order theory and by the ray trace program, were found to be in very close agreement. Image curvature is plotted as a function of the ray height ratio for a wide range of secondary magnification.

Wyman, C. L.↗

Thermal analytic model of 30 cm engineering model mercury ion thruster

A lumped parameter thermal nodal network was developed for a 30 cm Engineering Model Mercury Ion Thruster. The network consists of approximately 100 nodes coded in SINDA format for use on the Univac 1106/1108 computer. This model takes into account internal dissipation, radiation, and conduction as well as environmental heating. A series of tests were performed to simulate a wide range of thermal environments on an operating 30 cm thruster, instrumented to measure the temperature distribution within the thruster. The results of these tests were used to calibrate the analytical model. The analytical model along with comparisons between analytical and experimental results for the various operating conditions are presented.

Oglebay, J. C.↗

Thermal analytical model of a 30 cm mercury ion thruster

A lumped parameter thermal nodal network has been developed for a 30 cm engineering model mercury ion thruster. The network consists of approximately 100 nodes coded in SINDA format for use on the Univac 1106/1108 computer. This model takes into account internal dissipation, radiation, and conduction as well as environmental heating. A series of tests were performed at NASA-Lewis Research Center to simulate a wide range of thermal environments on an operating 30 cm thruster, instrumented to measure the temperature distribution within the thruster. The results of these tests were used to calibrate the analytical model. Presented in this paper are a description of the analytical model along with comparisons between analytical and experimental results for the various operating conditions.

Oglebay, J. C.↗

Curvature effects on stagnation radiative transfer in shock wave around blunt axisymmetric bodies

During hypersonic entry of a probe into the atmospheres of outer planets, the radiative energy transport in the shock-heated layer is of great significance in computing the heating to the heat shield. The so-called tangential slab approximation is frequently employed to evaluate the radiative flux to the surface of entry probes. A simple assessment of the accuracy of the tangential slab approximation at the stagnation point is given here for blunt axisymmetric bodies of various shock shapes which include spheres, paraboloids, hyperboloids and ellipsoids of different shock parameters.

Poon, P. T. Y.↗

Two inviscid computational simulations of separated flow about airfoils

Two inviscid computational simulations of separated flow about airfoils are described. The basic computational method is the line relaxation finite-difference method. Viscous separation is approximated with inviscid free-streamline separation. The point of separation is specified, and the pressure in the separation region is calculated. In the first simulation, the empiricism of constant pressure in the separation region is employed. This empiricism is easier to implement with the present method than with singularity methods. In the second simulation, acoustic theory is used to determine the pressure in the separation region. The results of both simulations are compared with experiment.

Barnwell, R. W.↗

Solution of the minimum time-to-climb problem by matched asymptotic expansions

Application of singular perturbation techniques to trajectory optimization problems of flight mechanics is discussed. The method of matched asymptotic expansions is used to obtain an approximate solution to the aircraft minimum time-to-climb problem. Outer, boundary-layer, and composite solutions are obtained to zeroth and first orders. A stability criterion is derived for the zeroth-order boundary-layer solutions (the theory requires a form of boundary-layer stability). A numerical example is considered for which it is shown that the stability criterion is satisfied and a useful numerical solution is obtained. The zeroth-order solution proves to be a poor approximation, but the first-order solution gives a good approximation for both the trajectory and the minimum time-to-climb. The computational cost of the singular perturbation solution is considerably less than that of a steepest descent solution. Thus singular perturbation methods appear to be promising for the solution of optimal control problems.

Ardema, M. D.↗

User's manual: Subsonic/supersonic advanced panel pilot code

Sufficient instructions for running the subsonic/supersonic advanced panel pilot code were developed. This software was developed as a vehicle for numerical experimentation and it should not be construed to represent a finished production program. The pilot code is based on a higher order panel method using linearly varying source and quadratically varying doublet distributions for computing both linearized supersonic and subsonic flow over arbitrary wings and bodies. This user's manual contains complete input and output descriptions. A brief description of the method is given as well as practical instructions for proper configurations modeling. Computed results are also included to demonstrate some of the capabilities of the pilot code. The computer program is written in FORTRAN IV for the SCOPE 3.4.4 operations system of the Ames CDC 7600 computer. The program uses overlay structure and thirteen disk files, and it requires approximately 132000 (Octal) central memory words.

Moran, J.↗

Computing LORAN time differences with an HP-25 hand calculator

A program for an HP-25 or HP-25C hand calculator that will calculate accurate LORAN-C time differences is described and presented. The program is most useful when checking the accuracy of a LORAN-C receiver at a known latitude and longitude without the aid of an expensive computer. It can thus be used to compute time differences for known landmarks or waypoints to predict in advance the approximate readings during a navigation mission.

Jones, E. D.↗

Forwardscattering corrections for optical extinction measurements in aerosol media. II - Polydispersions

The paper presents a parametric study of the forwardscattering corrections for experimentally measured optical extinction coefficients in polydisperse particulate media, since some forward scattered light invariably enters, along with the direct beam, into the finite aperture of the detector. Forwardscattering corrections are computed by two methods: (1) using the exact Mie theory, and (2) the approximate Rayleigh diffraction formula for spherical particles. A parametric study of the dependence of the corrections on mode radii, real and imaginary parts of the complex refractive index, and half-angle of the detector's view cone has been carried out for three different size distribution functions of the modified gamma type. In addition, a study has been carried out to investigate the range of these parameters in which the approximate formulation is valid. The agreement is especially good for small-view cone angles and large particles, which improves significantly for slightly absorbing aerosol particles. Also discussed is the dependence of these corrections on the experimental design of the transmissometer systems.

Deepak, A.↗

Development of a three-dimensional turbulent duct flow analysis

A method for computing three-dimensional turbulent subsonic flow in curved ducts is described. An approximate set of governing equations is given for viscous flows which have a primary flow direction. The derivation is coordinate invariant, and the resulting equations are expressed in terms of tensors. General tube-like coordinates were developed for a general class of geometries applicable to many internal flow problems. The coordinates are then particularized to pipes having superelliptic cross sections whose shape can vary continuously between a circle and a near rectangle. The analysis is applied to a series of relevant aerodynamic problems including transition from nearly square to round pipes and flow through a pipe with an S-shaped bend.

Eiseman, P. R.↗

A new approach in cascade flow analysis using the finite element method

A new approach in analyzing the potential flow past cascades and single airfoils using the finite element method is developed. In this analysis the circulation around the airfoil is not externally imposed but is directly computed in the numerical solution. Different finite element discretization patterns, orders of piecewise approximation, and grid sizes are used in the solution. The results obtained are compared with existing experimental measurements and exact solutions in cascades and single airfoils.

Baskharone, E.↗

Asymptotic continuation method for trajectory optimization

A continuation method is applied to a singular perturbation parameter to obtain a new numerical method for computing optimal trajectories. This method allows one to use simply calculated reduced order approximations as starting solutions and continue the perturbation parameter until the optimal full-order solution is obtained. The method does not require the calculation of higher order correction terms nor does it require the perturbation parameter to be small - thus, it has potentially superior convergence properties compared to conventional asymptotic expansions when the perturbation parameter is large. A simple trajectory optimization problem is considered to illustrate the method.

Washburn, R. B., Jr.↗

Thermal bremsstrahlung from high-temperature plasmas

Analytic expressions are derived for the total bremsstrahlung energy-loss rate per unit volume and the spectral emission rate of a very hot (10 million K to 1 billion K) plasma. At these temperatures the principal contribution to emission can be computed from the nonrelativistic limit of electron-ion bremsstrahlung in the Born approximation. Modifications to this rate are evaluated from (1) relativistic corrections to the thermal-electron velocity distribution function, (2) relativistic and spin corrections to the nonrelativistic electron-ion bremsstrahlung cross section, (3) electron-electron bremsstrahlung, and (4) first-order Born approximation corrections to electron-ion bremsstrahlung.

Gould, R. J.↗

QH observations

A model of the dissociative lifetime of the hydroxyl radical is computed where the H2O and OH velocities are vectorially added. A lifetime of approximately 3 x 100,000 seconds is determined.

Festou, M.↗

Expansion series of integral functions occurring in unsteady aerodynamics

Attention is given to two real integral functions which occur in the kernel of singular integral equations for subsonic unsteady lifting surfaces. The arguments k, r, and X of the functions correspond to the reduced frequency, spanwise distance, and modified coordinate in the flow direction, respectively. The value of the parameter nu in the functions depends on geometrical conditions. The considered investigation has the objective to present a series for general values of the nonnegative integer nu in order to compute efficiently the integral functions. The approach makes it possible to avoid any approximation or numerical quadrature.

Ueda, T.↗

Monte Carlo calculations of elementary particle properties

The object of this project is to calculate the masses of the elementary particles. This ambitious goal apparently is not possible using analytic methods or known approximation methods. However, it is probable that the power of a modern super computer will make at least part of the low lying mass spectrum accessible through direct numerical computation. Initial attempts by several groups at calculating this spectrum on small lattices of space time points have been very promising. Using new methods and super computers considerable progress has been made towards evaluating the mass spectrum on comparatively large lattices. Only more time and faster machines with increased storage will allow calculations of systems with guaranteed minimal boundary effects. The ideas that currently go into this calculation are outlined.

Guralnik, G. S.↗