Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Morphology, Deformations, and Photocatalytic Activity of Thermally Treated Brookite Titanium Dioxide Thin Films

Metastable states, in which the coupling between long-range lattice deformations and electronic properties can be controlled, provide a pathway to tailoring the behavior of photocatalytic materials by directing the flow of photoinduced charge carriers. Brookite is a metastable polymorph of earth-abundant TiO 2 that exhibits photocatalytic function and, due to its high energy relative to the anatase and rutile polymorphs, may serve as a precursor for the formation of transitional metastable structures. In this work, facile thermal annealing is employed to promote the formation of predominantly brookite-phase films, regulate the brookite lattice distortions, and determine the effect of these distortions on charge separation, ultimately directed at enhancing photocatalytic activity. Profile fitting of X-ray diffraction patterns and peak shifts in Raman spectra revealed structural distortions of the brookite lattice. Structural defects, including lattice gliding, dislocations, stacking faults, and twin boundaries, were observed using scanning transmission electron microscopy. First-principles simulations reveal how the lattice distortions associated with stacking faults induce band bending, thus increasing the photocatalytic activity of brookite. In conclusion, this study provides insight into the microstructural tuning of metastable phases to enhance their unique functionalities.

band bending↗

Atomic Insight into the Layered/Spinel Phase Transformation in Charged LiNi 0.80 Co 0.15 Al 0.05 O 2 Cathode Particles

Layered LiNi 0.80 Co 0.15 Al 0.05 O 2 (NCA) holds great promise as a potential cathode material for high energy density lithium ion batteries. However, its high capacity is heavily dependent on the stability of its layered structure, which suffers from a severe structure degradation resulting from a not fully understood layered → spinel phase transformation. Using high-resolution transmission electron microscopy and electron diffraction, we probe the atomic structure evolution induced by the layered → spinel phase transformation in the NCA cathode. We show that the phase transformation results in the development of a particle structure with the formation of complete spinel, spinel domains, and intermediate spinel from the surface to the subsurface region. The lattice planes of the complete and intermediate spinel phases are highly interwoven in the subsurface region. The layered → spinel transformation occurs via the migration of transition metal (TM) atoms from the TM layer into the lithium layer. Incomplete migration leads to the formation of the intermediate spinel phase, which is featured by tetrahedral occupancy of TM cations in the lithium layer. Finally, the crystallographic structure of the intermediate spinel is discussed and verified by the simulation of electron diffraction patterns.

36 MATERIALS SCIENCE↗

Iron Carbides in Fischer–Tropsch Synthesis: Theoretical and Experimental Understanding in Epsilon-Iron Carbide Phase Assignment

As active phases in low-temperature Fischer–Tropsch synthesis for liquid fuel production, epsilon iron carbides are critically important industrial materials. However, the precise atomic structure of epsilon iron carbides remains unclear, leading to a half-century of debate on the phase assignment of the ε-Fe 2 C and ε’-Fe 2.2 C. Here, we resolve this decades-long question by a combining theoretical and experimental investigation to assign the phases unambiguously. First, we have investigated the equilibrium structures and thermal stabilities of ε-Fe x C, (x = 1, 2, 2.2, 3, 4, 6, 8) by first-principles calculations. We have also acquired X-ray diffraction patterns and Mössbauer spectra for these epsilon iron carbides, and compared them with the simulated results. These analyses indicate that the unit cell of ε-Fe 2 C contains only one type of chemical environment for Fe atoms, while ε’-Fe 2.2 C has six sets of chemically distinct Fe atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lifetime Enhancement of Visible Light Induced Photocharges in Tungsten and Nitrogen in situ Codoped TiO 2 :WN Thin Films

We report on one-step in situ codoped TiO2 thin films synthesized by cosputtering. The purpose of this acceptor-donor passivated codoping approach is to overcome the optoelectronic limitations that arise for monodoped TiO2 in photocatalytic applications. To evaluate these added benefits, the TiO2:WN thin films were characterized by different techniques. X-ray diffraction patterns and X-ray photoelectron spectral analysis revealed that both N and W dopants are mostly present in the desired substitutional locations. Additionally, the codoping approach was found to reduce the internal strain and defect density of the TiO2:WN films as compared to their monodoped TiO2:N counterparts. This defect reduction is confirmed via photocharge lifetime variation obtained using visible light flash photolysis time-resolved microwave conductivity measurements (FP-TRMC). Photocharge lifetime analysis indicated the presence of three distinct decay processes: charge trapping, recombination, and surface reactions. These characteristic lifetimes of the codoped TiO2:WN films (i.e., 0.08, 0.75, and 11.5 us, respectively) were found to be about double those of their nitrogen monodoped TiO2:N counterparts (i.e., 0.03, 0.35, and 6.8 us), quantitatively confirming the effective passivating outcome of the tungsten-nitrogen codoping approach developed here. The practicality of this method was confirmed by integrating the TiO2:WN films as photoanodes for the electro-photocatalytic, solar light driven degradation of a real pollutant (i.e., atrazine). A significant increase in the degradation kinetics, leading to a 4-fold increase in the pseudo-first-order degradation constant for the optimally doped TiO2:WN photoanodes (0.106 min-1) from the undoped TiO2-x ones (0.026 min-1), is a direct consequence of the increased photocharge lifetimes in tandem with visible light photosensitivity.

14 SOLAR ENERGY↗

Crystal Structure of AgBi 2 I 7 Thin Films

Synthesis of cubic-phase AgBi 2 I 7 iodobismuthate thin films and fabrication of air-stable Pb-free solar cells using the AgBi 2 I 7 absorber have recently been reported. Based on X-ray diffraction (XRD) analysis and nominal composition, it was suggested that the synthesized films have a cubic ThZr 2 H 7 crystal structure with AgBi 2 I 7 stoichiometry. Through careful examination of the proposed structure and computational evaluation of the phase stability and bandgap, we find that the reported “AgBi 2 I 7 ” films cannot be forming with the ThZr 2 H 7 -type structure, but rather more likely adopt an Ag-deficient AgBiI 4 type. Both the experimental X-ray diffraction pattern and band gap can be better explained by the AgBiI 4 structure. Additionally, the proposed AgBiI 4 structure, with octahedral bismuth coordination, removes unphysically short Bi–I bonding within the BiI8 hexahedra of the ThZr 2 I 7 model. Our results provide critical insights for assessing the photovoltaic properties of AgBi 2 I 7 iodobismuthate materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactions on External MOF Surfaces: Desorption of Water and Ethanol from CuBDC Nanosheets

The external surfaces of metal-organic framework (MOF) materials are difficult to experimentally isolate due to the high porosities of these materials. MOF surface surrogates in the form of copper benzenedicarboxylate (CuBDC) nanosheets were synthesized using a bottomup approach and the surface interactions of water and ethanol were investigated by temperature programmed desorption (TPD). A method of analysis of diffusion-influenced TPD was developed to measure the desorption properties of these porous materials. This approach also allows the extraction of diffusion coefficients from TPD data. The transmission Fourier transform infrared spectra, powder X-ray diffraction patterns and TPD data indicate that water desorbs from CuBDC nanosheets with activation energies of 44±2 kJ/mol at edge sites and 58 ± 1 kJ/mol at external surface and internal and pore sites. Ethanol desorbs with activation energies of 58 ± 1 kJ/mol at internal pore sites and 66 ± 0.4 kJ/mol at external surface sites. Co-adsorption of water and ethanol was also investigated. The presence of ethanol was found to inhibit the desorption of water that results in a water desorption process with an activation energy of 68 ± 0.7 kJ/mol.

36 MATERIALS SCIENCE↗

High Thermoelectric Performance in 2D Sb 2 Te 3 and Bi 2 Te 3 Nanoplate Composites Enabled by Energy Carrier Filtering and Low Thermal Conductivity

Thermoelectrics are an important class of materials with great potential in alternative energy applications. In this study, two-dimensional (2D) nanoplates of the layered chalcogenides, Sb 2 Te 3 and Bi 2 Te 3 , are synthesized and composites of the two are investigated for their thermoelectric properties. The two materials, Sb 2 Te 3 and Bi 2 Te 3 , were synthesized as hexagonal, 2D nanoplates via a colloidal polyol route. The as-synthesized Sb 2 Te 3 and Bi 2 Te 3 vary drastically from one another in their lateral and vertical dimensions as revealed by scanning electron microscopy and atomic force microscopy. The single crystalline nanoplate nature is deduced by high-resolution transmission electron microscopy and selected area electron diffraction. Nanoplates have well-defined hexagonal facets as seen in the scanning and transmission electron microscopy images. The nanoplates were consolidated as an anisotropic nanostructured pellet via spark plasma sintering. Preferred orientation observed in the powder X-ray diffraction pattern and scanning electron microscopy images of the fractured pellets confirm the anisotropic structure of the nanoplates. Thermoelectric properties in the parallel and perpendicular directions were measured, revealing strong anisotropy with a significant reduction to thermal conductivity in the perpendicular direction due to increased phonon scattering at nanoplate interfaces. All compositions, except that of the 25% Bi 2 Te 3 nanoplate composite, behave as degenerate semiconductors with increasing electrical resistivity as the temperature increases. The Seebeck coefficient is also increased dramatically in the nanocomposites, the highest reaching 210 μV/K for 15% Bi 2 Te 3 . The increase in Seebeck is attributed to energy carrier filtering at the nanoplate interfaces. Overall, these enhanced thermoelectric properties lead to a drastic increase in the thermoelectric performance in the perpendicular direction, with zT ~ 1.26, for the 15% Bi 2 Te 3 nanoplate composite at 450 K.

36 MATERIALS SCIENCE↗

Novel Ordered Rocksalt-Type Lithium-Rich Li 2 Ru 1–x Ni x O 3-δ (0.3 ≤ x ≤ 0.5) Cathode Material with Tunable Anionic Redox Potential

In this work, a series of ordered rocksalt (OR) type Li-rich Li 2 Ru 1–x Ni x O 3-δ (LRN x O, 0.3 ≤ x ≤ 0.5) are successfully synthesized and investigated for the first time. X-ray diffraction and neutron powder diffraction patterns exhibit an obvious phase transition from layered to an OR structure as the Ni content gradually increases from x = 0 to x = 0.5, which leads to different electrochemical behaviors. In the case of OR-LRN 0.4 O, an ~350 mV decrease of the oxygen oxidation potential compared with Li 2 RuO 3 (LRO) is observed from around 4.2 to 3.85 V, which is confirmed by both X-ray photelectron O 1s spectra and dQ/dV results. Additionally, the role of Ni substitution on the oxygen redox reaction is studied by first-principles calculations, and it is concluded that the formation of the OR structure caused by Ni substitution is the main reason for lowering the oxygen oxidation potential. In addition, the average discharge voltage of OR-LRN 0.4 O is also enhanced compared with LRO. This work provides a novel innovative strategy to modulate and control the oxygen anion redox reaction for high-energy-density Li-rich materials, which shed light on the fundamental understanding and optimizing of the anion redox process in Li-rich materials.

25 ENERGY STORAGE↗

Electro-Optic Modulation Using Metal-Free Perovskites

Electro-optic (EO) modulation is of interest to impart information onto an optical carrier. Inorganic crystals—most notably LiNbO 3 and BaTiO 3 —exhibit EO modulation and good stability, but are difficult to integrate with silicon photonic technology. Solution-processed organic EO materials are readily integrated but suffer from thermal degradation at the temperatures required in operating conditions for accelerated reliability studies. Hybrid organic–inorganic metal halide perovskites have the potential to overcome these limitations; however, these have so far relied on heavy metals such as lead and cadmium. Here, we report linear EO modulation using metal-free perovskites, which maintain the crystalline features of the inorganic EO materials and incorporate the flexible functionality of organic EO chromophores. We find that, by introducing a deficiency of cations, we reduce the symmetry in the perovskite crystal and produce thereby an increased EO response. The best-engineered perovskites reported herein showcase an EO coefficient of 14 pm V –1 at a modulation frequency of 80 kHz, an order of magnitude higher than in the nondefective materials. Furthermore, we observe split peaks in the X-ray diffraction and neutron diffraction patterns of the defective sample, indicating that the crystalline structure has been distorted and the symmetry reduced. Density functional theory (DFT) studies link this decreased symmetry to NH 4 + deficiencies. This demonstration of EO from metal-free perovskites highlights their potential in next-generation optical information transmission.

36 MATERIALS SCIENCE↗

Compositionally Complex Spinel Oxides as Conversion Anodes for Lithium-Ion Batteries

Four different compositionally complex multicomponent M 3 O 4 spinels containing 5–8 distinct metals were prepared by a rapid combustion synthesis method or solvothermal synthesis. High resolution synchrotron X-ray diffraction patterns show that the materials consist primarily of spinel phases with small amounts of rock salt impurities, and, in several samples, a minor amount of contracted spinel phase. Materials were investigated as conversion anodes in lithium half-cells and delivered significantly higher capacities than two-component MgFe 2 O 4 made by combustion synthesis. X-ray absorption near-edge structure (XANES) was used to estimate the oxidation states of the metals in the pristine, lithiated (discharged) and delithiated (charged) materials to better understand the redox processes in half cells that led to the improvement. Co, Ni, and Zn are reduced to low oxidation states during lithiation (cell discharge) but are only partially oxidized. The presence of a conductive metallic network that forms after lithiation is thought to account for the improved electrochemical characteristics. Interestingly, in most of the samples, iron is not fully reduced during initial lithiation unlike what happens with a set of related high entropy spinel ferrites studied previously. Finally, the improved electrochemical properties of these materials illustrates both the advantages of complexity and the difficulties in predicting their behavior.

25 ENERGY STORAGE↗

Investigation of Thermal Stability of P2–Na x CoO 2 Cathode Materials for Sodium Ion Batteries Using Real-Time Electron Microscopy

In this paper, we take advantage of in situ transmission electron microscopy (TEM) to investigate the thermal stability of P2-type Na x CoO 2 cathode materials for sodium ion batteries, which are promising candidates for next-generation lithium ion batteries. A double-tilt TEM heating holder was used to directly characterize the changes in the morphology and the crystallographic and electronic structures of the materials with increase in temperature. The electron diffraction patterns and the electron energy loss spectra demonstrated the presence of cobalt oxides (Co 3 O 4 , CoO) and even metallic cobalt (Co) at higher temperatures as a result of reduction of Co ions and loss of oxygen. The bright-field TEM images revealed that the surface of Na x CoO 2 becomes porous at high temperatures. Higher cutoff voltages result in degrading thermal stability of Na x CoO 2 . Finally, the observations herein provide a valuable insight that thermal stability is one of the important factors to be considered in addition to the electrochemical properties when developing new electrode materials for novel battery systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

High-Resolution Imaging of Unstained Polymer Materials

Electron microscopy has played an important role in polymer characterization. Traditionally, electron diffraction is used to study crystalline polymers while transmission electron microscopy is used to study microphase separation in stained block copolymers and other multiphase systems. We describe developments that eliminate the barrier between these two approaches - it is now possible to image polymer crystals with atomic resolution. The focus of this Review is on high-resolution imaging (30 Å and smaller) of unstained polymers. Recent advances in hardware allow for capturing numerous (as many as 105) low-dose images from an unperturbed specimen; beam damage is a significant barrier to high-resolution electron microscopy of polymers. Machine-learning-based software is then used to sort and average the images to retrieve pristine structural information from a collection of noisy images. Acknowledging the heterogeneity in polymer samples prior to averaging is essential. Molecular conformations in a wide range of amphiphilic block copolymers, polymerized ionic liquids, and conjugated polymers can be gleaned from two-dimensional projections (2D), three-dimensional (3D) tomograms, and four-dimensional (4D) scanning transmission electron microscopy (STEM) data sets where 2D diffraction patterns are taken as a function of position. Some methods such as phase contrast STEM have been used to image closely related materials such as metal-organic frameworks but not polymers. With improvements in hardware and software, such methods may soon be applied to polymers. Our goal is to provide a comprehensive understanding of the strategies toward the high-resolution imaging of radiation sensitive polymer materials at different length scales.

36 MATERIALS SCIENCE↗

Roles of Hydration and Magnetism on the Structure of Ferrihydrite from First Principles

We report density functional theory calculations aimed at predicting thermodynamically stable structures for ferrihydrite across a range of possible compositions determined by the amount of structural water. Based on an assumed formula unit of Fe5O8H + nH2O, we performed ab initio calculations with evolutionary searching to find the lowest enthalpy structures as a function of the water content up to n = 2. This is the most exhaustive search for the ferrihydrite structure conducted so far; more than 5000 unique configurations were generated and evaluated over five states of hydration. Among them, the Michel akdaliate model was generated, along with several energetically comparable new structures at higher states of hydration. However, a direct comparison between calculated and experimental pair distribution function and X-ray diffraction patterns for the 50 lowest energy structures shows that none beyond the Michel model could be associated with ferrihydrite. Nevertheless, this energetically comparable structure set provides a novel basis for analyzing and understanding the effects of hydration and magnetism on the topology of ferrihydrite, from which we conclude that any tetrahedral Fe should be viewed as a metastable structural defect, created either as a result of the rapid kinetics of crystal growth or to accommodate a local magnetic stress between neighboring Fe atoms.

composition, density functional theory, ferrihydri↗

Identifying the Atomic-Level Effects of Metal Composition on the Structure and Catalytic Activity of Peptide-Templated Materials

Bioinspired approaches for the formation of metallic nanomaterials have been extensively employed for a diverse range of applications including diagnostics and catalysis. These materials can often be used under sustainable conditions; however, it is challenging to control the material size, morphology, and composition simultaneously. Here we have employed the R5 peptide, which forms a 3D scaffold to direct the size and linear shape of bimetallic PdAu nanomaterials for catalysis. The materials were prepared at varying Pd:Au ratios to probe optimal compositions to achieve maximal catalytic efficiency. These materials were extensively characterized at the atomic level using transmission electron microscopy, extended X-ray absorption fine structure spectroscopy, and atomic pair distribution function analysis derived from high-energy X-ray diffraction patterns to provide highly resolved structural information. The results confirmed PdAu alloy formation, but also demonstrated that significant surface structural disorder was present. The catalytic activity of the materials was studied for olefin hydrogenation, which demonstrated enhanced reactivity from the bimetallic structures.These results present a pathway to the bioinspired production of multimetallic materials with enhanced properties, which can be assessed via a suite of characterization methods to fully ascertain structure/function relationships.

36 MATERIALS SCIENCE↗

Structural Changes as a Function of Thickness in [(SnSe) 1+δ ] m TiSe 2 Heterostructures

Single- and few-layer metal chalcogenide compounds are of significant interest due to structural changes and emergent electronic properties on reducing dimensionality from three to two dimensions. To explore dimensionality effects in SnSe, a series of [(SnSe) 1+δ ] m TiSe 2 intergrowth structures with increasing SnSe layer thickness (m = 1-4) were prepared from designed thin-film precursors. In-plane diffraction patterns indicated that significant structural changes occurred in the basal plane of the SnSe constituent as m is increased. Scanning transmission electron microscopy cross-sectional images of the m = 1 compound indicate long-range coherence between layers, whereas the m >/= 2 compounds show extensive rotational disorder between the constituent layers. For m >/= 2, the images of the SnSe constituent contain a variety of stacking sequences of SnSe bilayers. Density functional theory calculations suggest that the formation energy is similar for several different SnSe stacking sequences. The compounds show unexpected transport properties as m is increased, including the first p-type behavior observed in (MSe)m(TiSe 2 ) n compounds. The resistivity of the m >/- 2 compounds is larger than for m = 1, with m = 2 being the largest. At room temperature, the Hall coefficient is positive for m = 1 and negative for m = 2-4. The Hall coefficient of the m = 2 compound changes sign as temperature is decreased. The room-temperature Seebeck coefficient, however, switches from negative to positive at m = 3. These properties are incompatible with single band transport indicating that the compounds are not simple composites.

36 MATERIALS SCIENCE↗

Green Needle Coke Production from Pyrolysis Biocrude toward Bio-based Anode Material Manufacture: Biochar Fines Addition Effect as “Physical Template” on the Crystalline Order

Here, a new method for producing green needle coke (GNC) is developed by replacing the “heavy fraction” of petroleum pitch delayed coking with fast pyrolysis biocrude. A series of alternative biocrude distillation, carbonization, and calcination conditions were investigated to determine the influence of these processing parameters onto the crystalline structure of the resulting graphitized material. For the first time, the addition of biochar fines was found to serve as a “physical template” to increase the graphitic nature of the final product. During the initial biocrude carbonization (350–450 °C), volatile compounds are released, and aromatics in pyrolysis biocrude experience condensation, resulting in GNC solids with carbon contents above 95 wt % and some early lamellar structure. In the second stage of the thermal process (25–1500 °C), there are additional thermal decomposition reactions with an increase in the aromatic nature of the graphitized solid. It was found that systematic addition of biochar fines induces a nucleating effect during the GNC development. Thermogravimetric analysis suggests that biochar fines promote polycondensation reactions by modifying the biopitch structure and molecular weight, while elemental analysis (CHN) shows a reduction in both H/C and O/C ratios which are consistent with the increase in aromaticity and removal of oxygenated compounds as thermal treatment evolves. The effects of different bio-based pitch materials (after distillation) and GNC intermediates were evaluated by pyrolysis-gas chromatography mass spectrometry and Fourier transform infrared, displaying slight changes on product yields and quality. X-ray diffraction patterns taken after graphitization evidence an increase in the graphitic order with the addition of biochar fines. Transmittance electron microscopy depicts an improvement on graphitic morphology as biochar fine content increases. The use of biochar fines showed a significant increase in graphitic ordering at addition levels above 0.01 wt %. These results show that thermally treated biocrude/biochar fine systems can produce graphitic structures (hard carbon-like) that might be suitable for the manufacture of sodium-ion batteries.

09 BIOMASS FUELS↗

Synergistic Removal of Zinc and Copper in Greenhouse Waste Effluent by Struvite

Struvite (MgNH 4 PO 4 ·6H 2 O) can be recovered from wastewaters for mitigation of phosphorus content. However, the interaction of dissolved constituents with struvite is rarely evaluated. Removal of heavy metals and total organic carbon (TOC) in a greenhouse wastewater (GW) by struvite was investigated in this work. Presynthesized struvite was added to GW and removal of Zn (689 μg/L), Cu (151 μg/L), and TOC (51 mg/L) monitored from 1 to 26 d. Metal uptake in sodium nitrate solutions was used to assess competition, and the influence of other GW constituents on sorption. Struvite was also directly precipitated from GW (PPT). Recovered GW solids had 64–247 mg/kg Zn, 12–54 mg/kg Cu, and 1721–8806 mg/kg TOC, with lowest loadings for PPT and highest for 26 d solids. X-ray absorption spectroscopy detected polymerized Zn-phosphate, induced by dissolved phosphorus in GW, and Cu copolymerization, initially limited by aqueous Cu-organic complexation. Sorbed Cu shifts Fourier transform infrared-sensitive phosphate bands and changes the intensities of reflections in X-ray diffraction patterns of struvite more so than Zn. Struvite from GW is more susceptible to thermal decomposition than unreacted struvite, evolving CO(g), CO 2 (g), NH 3 (g), and H 2 O(g). Therefore, struvite from GW sorbs metals and organics, and can release sorbed and structural components to the aqueous and gas phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Efficient, Solvent-Free Process for Synthesizing Anhydrous MgCl 2

A new efficient and solvent-free method for the synthesis of anhydrous MgCl2 from its hexahydrate is proposed. Fluidized dehydration of MgCl 2 ·6H 2 O feedstock at 200 °C in a porous bed reactor yields MgCl2·nH2O (0 < n < 1), which has a similar diffraction pattern as activated MgCl2. The MgCl 2 ·nH 2 O is then ammoniated directly using liquefied NH 3 in the absence of solvent to form MgCl 2 ·6NH 3 . Calcination of the hexammoniate complex at 300 °C then yields anhydrous MgCl 2 . Both dehydration and deammoniation were thoroughly studied using in situ as well as ex situ characterization techniques. Specifically, a detailed understanding of the dehydration process was monitored by in situ PXRD and in situ FTIR techniques where formation of salt with nH 2 O (n = 4, 2, 1, <1) was characterized. Given the reduction in thermal energy required to produce dehydrated feedstock with this method compared with current strategies, significant cost benefits are expected. Overall, the combined effect of activation, macroporosity, and coordinated water depletion allows the formation of hexammoniate without using solvent, thus minimizing waste formation.

Motkuri, Radha K.↗