Search NASA⌕ Search

SEARCH · Search NASA

Results for “Display type.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Breaking down barriers in cooperative fault management: Temporal and functional information displays

At the highest level, the fundamental question addressed by this research is how to aid human operators engaged in dynamic fault management. In dynamic fault management there is some underlying dynamic process (an engineered or physiological process referred to as the monitored process - MP) whose state changes over time and whose behavior must be monitored and controlled. In these types of applications (dynamic, real-time systems), a vast array of sensor data is available to provide information on the state of the MP. Faults disturb the MP and diagnosis must be performed in parallel with responses to maintain process integrity and to correct the underlying problem. These situations frequently involve time pressure, multiple interacting goals, high consequences of failure, and multiple interleaved tasks.

Potter, Scott S.↗

Tessera Terrain on Venus: A Survey of the Global Distribution, Characteristics, and Relation to Surrounding Units from Magellan Data

The tessera terrain on Venus, comprised of areas of high radar backscatter, complex deformation patterns relative to other units, and topography standing higher than surrounding plains, covers approximately 35.33 x 10(exp 6)sq km, about 8% of the surface of Venus, and is nonrandomly distributed, being preferentially located at equatorial and higher northern latitudes with a distinct paucity below about 30degS. Individual tessera occurrences range in area from the lower limits of our measurements (about 200 sq km) up to the largest tessera, Ovda, with an area of about 8.6 x 10(exp 6)sq km, or about 2% of the surface area of Venus. The size-frequency distribution of tessera patches is strongly unimodal and skewed toward smaller sizes, reflecting the great abundance of small tessera fragments. Modes of occurrence include (1) large clusters (e.g., Aphrodite Terra and Ishtar Terra); (2) arc-like segments which may extend for thousands of kilometers and are either concave inward toward the major tessera cluster development or away from it; (3) areas where tesserae are rare or absent which occur both as low-lying plains (e.g., Guinevere Planitia), and as elevated regions (e.g., Ata Regio). Tessera terrain has a bimodal elevation-frequency distribution, with the main peak at about 0- 1 km and an additional peak at about 3 km above mean planetary radius. In terms of number of occurrences, however, tesserae do not display a correlation with elevation at the global scale, since small tessera patches commonly occupy low-lying regions. Although tessera exhibit a range of gravity signatures, many occurrences are interpreted to represent relatively shallow (crustal) levels of compensation. Tessera boundaries include Type I (sinuous/embayed, dominated by adjacent lava plains embaying tessera massifs; 73% of total tesserae boundaries) and Type II (linear/tectonic). Only a small percentage of the length of all boundary types show no lava embayment and could be interpreted as tectonically active for long periods subsequent to initial tessera formation. Occurrence of broad slopes of post-tessem embayed plains away from tessera boundaries suggests that regional tilting occurred subsequent to final temra deformation in some places.

Ivanov, Mikhail↗

Evaluation of a High Temperature SOI Half-Bridge MOSFET Driver, Type CHT-HYPERION

Silicon-On-Insulator (SOI) technology utilizes the addition of an insulation layer in its structure to reduce leakage currents and to minimize parasitic junctions. As a result, SOIbased devices exhibit reduced internal heating as compared to the conventional silicon devices, consume less power, and can withstand higher operating temperatures. In addition, SOI electronic integrated circuits display good tolerance to radiation by virtue of introducing barriers or lengthening the path for penetrating particles and/or providing a region for trapping incident ionization. The benefits of these parts make them suitable for use in deep space and planetary exploration missions where extreme temperatures and radiation are encountered. Although designed for high temperatures, very little data exist on the operation of SOI devices and circuits at cryogenic temperatures. In this work, the performance of a commercial-off-the-shelf (COTS) SOI half-bridge driver integrated circuit was evaluated under extreme temperatures and thermal cycling. The investigations were carried out to establish a baseline on the functionality and to determine suitability of this device for use in space exploration missions under extreme temperature conditions.

Patterson, Richard↗

Experimental Measurements of Clothes Dryer Drum Heat and Mass Transfer Effectiveness

Accurate system modeling of a clothes dryer requires a drum component model that displays correct trends with respect to changing conditions. In this work, a model of drum heat and mass transfer effectiveness is adopted. Within this framework, experimental measurements of drum effectiveness are investigated with respect to several variables: drum volume, load mass, cloth type, drum volumetric air flow rate, and drum entering air temperature. These data can inform the modeling and simulation of any clothes dryer with horizontal-axis, axial-flow tumble-type clothes dryer drum.

Gluesenkamp, Kyle R.↗

Towards Cooperative Control of Humanoid Robots for Handling High-Consequence Materials in Gloveboxes - 17291

In this paper, we describe our ongoing work with NASA's Valkyrie humanoid robot and present preliminary results on cooperative control of Valkyrie's hands for performing dexterous manipulation tasks inside gloveboxes commonly found in many nuclear facilities. First, we discuss our human-supervised robot control framework which is based on optimization-based whole-body motion and manipulation controllers. A key aspect of this approach is perception based grasping. We develop a grasping control module for realizing the grasps corresponding to sample tasks such as power, ball, key, pinch, and open palm grasps and their variations. Next, we introduce the notion of motion template library in order to develop generalizable robot grasping and manipulation. Motion template library stores the constraint setting information for the constrained motion planning methods and a framework which can implement the motion template library on different types of robots for accomplishing similar tasks. Motion templates are defined only based on the task requirements. As a result, they can be easily ported to different robot platforms. Lastly, we discuss our multi-modal interfaces designs which include a visual display for improved situational awareness as well as a tactile glove for robot hand control and feedback. Our goal is for the person tele-operating the Valkyrie robot to have better sensing and control than what he or she would have if actually standing at the glovebox doing the work. This improved sensing is comprised of the ability to 'see through' the robot's arms and hands in the gloves and to have an improved sense of touch. The paper concludes with a discussion of our validation strategy. Our success metrics are derived from the completion of a relatively complex experiment to be performed in the glovebox. We evaluate various realistic experiments and use them for task validation and demonstration with Valkyrie. We use speed, time of completion, accuracy, repeatability and reliability rates as success metrics by designing replicable experiments. (authors)

42 ENGINEERING↗

Evidence for Magnetic Activity at Starbirth: a Powerful X-ray Flare From the Class 0 Protostar HOPS 383

Context. Class 0 protostars represent the earliest evolutionary stage of solar-type stars, during which the majority of the system mass resides in an infalling envelope of gas and dust and not yet in the central, nascent star. Although X-rays are a key signature of magnetic activity in more evolved protostars and young stars, whether such magnetic activity is present at the Class 0 stage is still debated. Aims. We aim to detect a bona fide Class 0 protostar in X-rays. Methods. We observed HOPS 383 in 2017 December in X-rays with the Chandra X-ray Observatory (~84 ks) and in near-infrared imaging with the Southern Astrophysical Research Telescope (SOAR). Results. HOPS 383 was detected in X-rays during a powerful flare. This hard (E > 2 keV) X-ray counterpart was spatially coincident with the northwest 4-cm component of HOPS 383, which would be the base of the radio thermal jet launched by HOPS 383. The flare duration was ~3.3 h; at the peak, the X-ray luminosity reached ~4 x 10(exp 31) erg/s in the 2–8 keV energy band, a level at least an order of magnitude larger than that of the undetected quiescent emission from HOPS 383. The X-ray flare spectrum is highly absorbed (N(H) ~ 7 x 10(exp 23) per sq.cm), and displays a 6.4 keV emission line with an equivalent width of ~1:1 keV, arising from neutral or low-ionization iron. Conclusions. The detection of a powerful X-ray flare from HOPS 383 constitutes direct proof that magnetic activity can be present at the earliest formative stages of solar-type stars.

Nicolas Grosso↗

Crystal structure, magnetism and transport properties of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10}

Single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10} were obtained from a process in which a polycrystalline sample of CeRu{sub 2}Al{sub 2}B was annealed in an excess of a Ni–In flux. The initial phase, CeRu{sub 2}Al{sub 2}B, does not recrystallize, instead, crystals of a new phase, Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10}, could be isolated once the flux was removed. The title compound crystallizes in the tetragonal space group P4/nmm (No. 129) with a=1139.02(8), c=801.68(6) pm (c/a=0.70) in the Nd{sub 3}Ni{sub 29}Si{sub 4}B{sub 10} structure type. Electrical resistivity measurements reveal metallic behavior with a minimum of 700 µΩ cm and a small residual resistivity ratio of RRR=1.4 indicating a large amount of disorder scattering. The cerium atoms are either in the 4+ or an intermediate valence state with a valence fluctuation temperature far above room temperature. - Graphical abstract: Single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}A{sub l4.1}B{sub 10} were obtained using a process in which a polycrystalline sample of CeRu{sub 2}Al{sub 2}B was annealed in an excess of a Ni–In flux. Electrical resistivity measurements reveal metallic behavior with a minimum of 700 μΩ cm and a small residual resistivity ratio of RRR=1.4 indicating a large amount of disorder scattering. The cerium atoms are either in the 4+ or an intermediate valence state with a valence fluctuation temperature far above room temperature. Display Omitted - Highlights: • Flux synthesis of high quality single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10} is presented along with the crystal structure, magnetic and transport properties. • The compound is isostructural to Nd{sub 3}Ni{sub 29}Si{sub 4}B{sub 10} but is first of this structure type showing mixed occupancies of d-elements. • This is an intermetallic phase with Ce in either the 4+ or an intermediate valence state. • The fact that this structure with mixed occupied transition metal sites exists suggests that more compounds of this type should be accessible and the physical properties tuned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Relationship Between Neutrophil–Lymphocyte Ratio and Primary Patency of Percutaneous Transluminal Angioplasty in Hemodialysis Arteriovenous Fistula Stenosis When Using Conventional and Drug-Eluting Balloons

ObjectiveThe aim of this study is to investigate the potential association of neutrophil–lymphocyte ratio (NLR) between primary patency of percutaneous transluminal angioplasty (PTA) in hemodialysis arteriovenous fistula stenosis and type (Conventional and Drug-Eluting) of balloons used in PTA.Material-MethodThis retrospective study consists of 78 patients with significant arteriovenous fistulas stenosis who were treated with PTA by using Drug-Eluting Balloon (DEB) (n = 29) or Conventional Balloon (CB) (n = 49). NLR was calculated from preinterventional blood samples. All patients were classified into two groups. Group A; primary patency <12 months (43/78), Group B; primary patency ≥12 months (35/78). Cox regression analysis and Kaplan–Meier method were used to determine respectively independent factors affecting the primary patency and to compare the primary patency for the two balloon types.ResultsNLR ratio and balloon type of the two groups were significantly different (p = 0.002, p = 0.010). The cut-off value of NLR was 3.18 for determination of primary patency, with sensitivity of 81.4 % and specificity of 51.4 %. Primary patency rates between PTA with DEB and CB displayed statistically significant differences (p < 0.05). The cut-off value was 3.28 for determination of 12-month primary patency with the conventional balloon group; sensitivity was 81.8 % and specificity was 81.3 %. There was no statistical relation between NLR levels and the drug-eluting balloon group in 12-month primary patency (p = 0.927).ConclusionIncreased level of NLR may be a risk factor in the development of early AVF restenosis after successful PTA. Preferring Drug-Eluting Balloon at an increased level of NLR can be beneficial to prolong patency.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Activation of calcium-sensing receptor increases TRPC3 expression in rat cardiomyocytes

Research highlights: {yields} Calcium-sensing receptor (CaR) activation stimulates TRP channels. {yields} CaR promoted transient receptor potential C3 (TRPC3) expression. {yields} Adult rat ventricular myocytes display capacitative calcium entry (CCE), which was operated by TRPCs. {yields} TRPC channels activation induced by CaR activator sustained the increased [Ca{sup 2+}]{sub i} to evoke cardiomyocytes apoptosis. -- Abstract: Transient receptor potential (TRP) channels are expressed in cardiomyocytes, which gate a type of influx of extracellular calcium, the capacitative calcium entry. TRP channels play a role in mediating Ca{sup 2+} overload in the heart. Calcium-sensing receptors (CaR) are also expressed in rat cardiac tissue and promote the apoptosis of cardiomyocytes by Ca{sup 2+} overload. However, data about the link between CaR and TRP channels in rat heart are few. In this study, reverse transcriptase polymerase chain reaction (RT-PCR) and Western blotting were used to examine the expression of the TRP canonical proteins TRPC1 and TRPC3 in adult and neonatal rat cardiomyocytes. Laser scan confocal microscopy was used to detect intracellular [Ca{sup 2+}]{sub i} levels in isolated adult rat ventricular myocytes. The results showed that, in adult rat cardiomyocytes, the depletion of Ca{sup 2+} stores in the endoplasmic/sarcoplasmic reticulum (ER/SR) by thapsigargin induced a transient increase in [Ca{sup 2+}]{sub i} in the absence of [Ca{sup 2+}]{sub o} and the subsequent restoration of [Ca{sup 2+}]{sub o} sustained the increased [Ca{sup 2+}]{sub i} for a few minutes, whereas, the persisting elevation of [Ca{sup 2+}]{sub i} was reduced in the presence of the TRPC inhibitor SKF96365. The stimulation of CaR by its activator gadolinium chloride (GdCl{sub 3}) or spermine also resulted in the same effect and the duration of [Ca{sup 2+}]{sub i} increase was also shortened in the absence of [Ca{sup 2+}]{sub o}. In adult and neonatal rat cardiomyocytes, GdCl{sub 3} increased the expression of TRPC3 mRNA and protein, which were reversed by SKF96365 but not by inhibitors of the L-type channels and the Na{sup +}/Ca{sup 2+} exchangers. However, GdCl{sub 3} had no obvious effect on the expression of TRPC1 protein. These results suggested that CaR stimulation induced activation of TRP channels and promoted the expression of TRPC3, but not TRPC1, that sustained the increased [Ca{sup 2+}]{sub i}.

60 APPLIED LIFE SCIENCES↗

Investigation of structural and magnetic properties of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nano powders prepared by self combustion method

Graphical abstract: Display Omitted Highlights: ► Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} prepared by self combustion with uniform/nonuniform heating. ► Characterized using TEM, XRD, in-field Mössbauer and DC magnetometry. ► Leads to bimodal (S1) and very narrow size distribution (S2) type nano samples. ► S1 has magnetic properties of bulk Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}. ► Although very even sized, S2 large magnetic anisotropy distribution. -- Abstract: Nano powders of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} have been synthesized by the self-combustion method at a relatively low temperature of 473 K under conditions of non-uniform and uniform heating. Rietveld fitting of X-ray diffractograms confirm the formation of the pure spinel phase in both samples. Transmission electron microscopy indicates that the sample prepared under non-uniform heating has a bimodal particle size distribution (average values 16 nm and 6 nm) while the one prepared under uniform heating has a very narrow particle size distribution (average size 4 nm). Low temperature, in-field Mössbauer spectroscopic studies clearly show surface spin contributions. The hyperfine fields and Curie temperature of the non-uniformly heated sample are in good agreement with those reported for the corresponding bulk samples. Despite having a very narrow particle size distribution, the uniformly heated sample has a large anisotropy distribution which is evident in the broad transition visible in the temperature dependent magnetization curve. It is also corroborated by the fact that the experimental magnetization curve at room temperature requires two Langevin functions for satisfactory reproduction.

36 MATERIALS SCIENCE↗

Leaching of indium from obsolete liquid crystal displays: Comparing grinding with electrical disintegration in context of LCA

Highlights: Black-Right-Pointing-Pointer Two pre-treatment methods, prior to leaching of indium from obsolete LCD modules, were described. Black-Right-Pointing-Pointer Conventional grinding and electrical disintegration have been evaluated and compared in the context of LCA. Black-Right-Pointing-Pointer Experimental data on the leaching capacity for indium and the electricity consumption of equipment were inputted into the LCA model in order to compare the environmental performance of each method. Black-Right-Pointing-Pointer An estimate for the environmental performance was calculated as the sum of six impact categories. Black-Right-Pointing-Pointer Electrical disintegration method outperforms conventional grinding in all impact categories. - Abstract: In order to develop an effective recycling system for obsolete Liquid Crystal Displays (LCDs), which would enable both the leaching of indium (In) and the recovery of a pure glass fraction for recycling, an effective liberation or size-reduction method would be an important pre-treatment step. Therefore, in this study, two different types of liberation methods: (1) conventional grinding, and (2) electrical disintegration have been tested and evaluated in the context of Life Cycle Assessment (LCA). In other words, the above-mentioned methods were compared in order to find out the one that ensures the highest leaching capacity for indium, as well as the lowest environmental burden. One of the main findings of this study was that the electrical disintegration was the most effective liberation method, since it fully liberated the indium containing-layer, ensuring a leaching capacity of 968.5 mg-In/kg-LCD. In turn, the estimate for the environmental burden was approximately five times smaller when compared with the conventional grinding.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Spectrally Resolved Photodynamics of Individual Emitters in Large-Area Monolayers of Hexagonal Boron Nitride

Hexagonal boron nitride (h-BN) is a 2D, wide band gap semiconductor that has recently been shown to display bright room-temperature emission in the visible region, sparking immense interest in the material for use in quantum applications. In this work, we study highly crystalline, single atomic layers of chemical vapor deposition grown h-BN and find predominantly one type of emissive state. Using a multidimensional super-resolution fluorescence microscopy technique we simultaneously measure spatial position, intensity, and spectral properties of the emitters, as they are exposed to continuous wave illumination over minutes. As well as low emitter heterogeneity, we observe inhomogeneous broadening of emitter line-widths and power law dependency in fluorescence intermittency; this is strikingly similar to previous work on quantum dots. Lastly, these results show that high control over h-BN growth and treatment can produce a narrow distribution of emitter type and that surface interactions heavily influence the photodynamics. Furthermore, we highlight the utility of spectrally resolved wide-field microscopy in the study of optically active excitations in atomically thin two-dimensional materials.

36 MATERIALS SCIENCE↗

Long range lateral migration of intrinsic point defects in n-type 4H-SiC

The lateral distributions of intrinsic point defects in n-type (0001) 4H-SiC have been investigated following room temperature irradiation with a focused beam of 10 keV protons. Laterally resolved deep level transient spectroscopy measurements reveal that the well-known and prominent Z{sub 1/2} and S{sub 1/2} centers display lateral diffusion lenghts on the order of 1 mm with negligible (if any) motion parallel to the direction of the c-axis. The migration occurs only in the presence of excess charge carriers generated during the proton irradiation, and no further motion takes place even under subsequent optical excitation of high intensity. Assuming one-dimensional geometry, an effective defect diffusivity in excess of 10{sup -6} cm{sup 2}/s is deduced by numerical modelling of the experimental data, corresponding to an energy barrier for migration of {approx}0.2 eV. Possible mechanisms for the rapid migration, invoking charge carrier recombination as a necessary condition, are discussed, and especially, an association with the glide of partial dislocations along the (0001) basal plane is scrutinized in some detail.

36 MATERIALS SCIENCE↗

Widely bandgap tunable amorphous Cd–Ga–O oxide semiconductors exhibiting electron mobilities ≥10 cm{sup 2 }V{sup −1 }s{sup −1}

Amorphous oxide semiconductors exhibit large electron mobilities; however, their bandgaps are either too large for solar cells or too small for deep ultraviolet applications depending on the materials system. Herein, we demonstrate that amorphous Cd–Ga–O semiconductors display bandgaps covering the entire 2.5–4.3 eV region while maintaining large electron mobilities ≥10 cm{sup 2 }V{sup −1 }s{sup −1}. The band alignment diagram obtained by ultraviolet photoemission spectroscopy and the bandgap values reveal that these semiconductors form type-II heterojunctions with p-type Cu{sub 2}O, which is suitable for solar cells and solar-blind ultraviolet sensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Kepler eclipsing system KIC 5621294 and its substellar companion

We present the physical properties of KIC 5621294, showing light and timing variations from the Kepler photometry. Its light curve displays partial eclipses and the O’Connell effect, with Max II fainter than Max I, which was fitted quite well by applying third-body and spot effects to the system. The results indicate that the eclipsing pair is a classical Algol-type system with parameters of q = 0.22, i = 76.°8, and Δ(T{sub 1}−T{sub 2}) = 4235 K, in which the detached primary component fills about 77% of its limiting lobe. Striking discrepancies exist between the primary and secondary eclipse times obtained with the method of Kwee and van Woerden. These are mainly caused by surface inhomogeneities due to spot activity detected in our light curve synthesis. The 1253 light curve timings from the Wilson–Devinney code were used for a period study. It was found that the orbital period of KIC 5621294 has varied due to periodic variation overlaid on a downward parabola. The sinusoidal variation with a period of 961 days and a semi-amplitude of 22.5 s most likely arises from a light-time effect due to a third component with a mass of M{sub 3}sini{sub 3} = 46.9 M{sub Jup}, which is in good agreement with that calculated from the light curve itself. If its orbital inclination is larger than about 40°, the mass of the circumbinary object would possibly match a brown dwarf. The parabolic variation could not be fully explained by either a mass transfer between the binary components or angular momentum via magnetic braking. It is possible that the parabola may be the only observed part of a period modulation caused by the presence of another companion in a wider orbit.

79 ASTRONOMY AND ASTROPHYSICS↗

HERSCHEL OBSERVATIONS OF A NEWLY DISCOVERED UX Ori STAR IN THE LARGE MAGELLANIC CLOUD

The LMC star, SSTISAGE1C J050756.44-703453.9, was first noticed during a survey of EROS-2 light curves for stars with large irregular brightness variations typical of the R Coronae Borealis (RCB) class. However, the visible spectrum showing emission lines including the Balmer and Paschen series as well as many Fe II lines is emphatically not that of an RCB star. This star has all of the characteristics of a typical UX Ori star. It has a spectral type of approximately A2 and has excited an H II region in its vicinity. However, if it is an LMC member, then it is very luminous for a Herbig Ae/Be star. It shows irregular drops in brightness of up to 2 mag, and displays the reddening and 'blueing' typical of this class of stars. Its spectrum, showing a combination of emission and absorption lines, is typical of a UX Ori star that is in a decline caused by obscuration from the circumstellar dust. SSTISAGE1C J050756.44-703453.9 has a strong IR excess and significant emission is present out to 500 {mu}m. Monte Carlo radiative transfer modeling of the spectral energy distribution requires that SSTISAGE1C J050756.44-703453.9 have both a dusty disk as well as a large extended diffuse envelope to fit both the mid- and far-IR dust emission. This star is a new member of the UX Ori subclass of the Herbig Ae/Be stars and only the second such star to be discovered in the LMC.

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanical and electronic properties of CeO{sub 2}, ThO{sub 2}, and (Ce,Th)O{sub 2} alloys

A systematic first-principle study is conducted to calculate bulk modulus, elastic constants, phonon-dispersion curves, and electronic structures of CeO{sub 2}, ThO{sub 2}, and their ordered binary alloys Ce{sub x}Th{sub 8-x}O{sub 16} with x=1, 2, 4, 6, and 7 using local-density approximation (LDA), generalized gradient approximation (GGA), LDA+U, and GGA+U approaches. In order to get accurate results for these type of systems including f electrons [Ce(4f) and Th(5f)] we optimized the U parameter for use in LDA+U and GGA+U approaches. The computed structural, mechanical, and electronic properties of CeO{sub 2} and ThO{sub 2} are observed to display strong correlation with experimental data. In particular, the best agreement with experiment is obtained within the LDA+U in which on-site Coulomb interaction parameter (U{sub eff}) for Ce and Th are taken as 6.0 and 5.0 eV. To check the stability of alloy forms, phonon-dispersion curves of Ce{sub x}Th{sub 8-x}O{sub 16} with x=2, 4, and 6 are computed. In all concentrations, mechanical stability conditions are satisfied for alloys. Furthermore, we observed no negative phonon branches in the phonon spectrum of alloys. Our calculations indicated a strong effect of concentration, x, on the electronic structure of Ce{sub x}Th{sub 8-x}O{sub 16}.

36 MATERIALS SCIENCE↗

IUE and visual spectrophotometry of Markarian 9, Markarian 10, and 3C 390.3

Ultraviolet spectra from IUE are combined with visual spectra for the three type I Seyfert galaxies Mrk 9, Mrk 10, and 3C 390.3. The 2175 A interstellar feature is measured well enough in Mrk 9 to indicate that the extinction corresponding to E(B-V) = 0.14 + or - 0.04 is in the galaxy. Mrk 10 displays evidence for 2175 A absorption and also yields E(B-V) = 0.14 + or - 0.07, while the continuum for 3C 390.3 is too weak to positively detect the feature. It is found, after correcting for reddening, that the line-intensity ratio L(alpha)/H(beta) ranges from 8 to 18, while that for H(alpha)/H(beta) goes from 2.1 to 5.4. It is noted that the He II 1640/4686 line ratio is uncertain but appears to be consistent with the recombination value of about 8. If photoionization is assumed, a comparison of the strengths of L(alpha) and H(beta) with the UV ionizing flux suggests that H(beta) is enhanced rather than L(alpha) depressed. When a comparison is made with similar ratios in quasars, L(alpha) is found to be much stronger and H(beta) slightly stronger in Seyferts than in quasars.

Oke, J. B.↗