Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ensemble computing.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-Resolving Model Simulations

Cloud microphysics are inevitably affected by the smoke particle (CCN, cloud condensation nuclei) size distributions below the clouds. Therefore, size distributions parameterized as spectral bin microphysics are needed to explicitly study the effects of atmospheric aerosol concentration on cloud development, rainfall production, and rainfall rates for convective clouds. Recently, two detailed spectral-bin microphysical schemes were implemented into the Goddard Cumulus Ensemble (GCE) model. The formulation for the explicit spectral-bin microphysical processes is based on solving stochastic kinetic equations for the size distribution functions of water droplets (i.e., cloud droplets and raindrops), and several types of ice particles [i.e.,pristine ice crystals (columnar and plate-like), snow (dendrites and aggregates), graupel and frozen drops/hail]. Each type is described by a special size distribution function containing many categories (i.e. 33 bins). Atmospheric aerosols are also described using number density size-distribution functions.A spectral-bin microphysical model is very expensive from a from a computational point of view and has only been implemented into the 2D version of the GCE at the present time. The model is tested by studying the evolution of deep tropical clouds in the west Pacific warm pool region using identical thermodynamic conditions but with different concentrations of CCN: a low "clean" concentration and a high "dirty" concentration. Besides the initial differences in aerosol concentration, preliminary results indicate that the low CCN concentration case produces rainfall at the surface sooner than the high CCN case but has less cloud water mass aloft. Because the spectral-bin model explicitly calculates and allows for the examination of both the mass and number concentration of species in each size categor, a detailed analysis of the instantaneous size spectrum can be obtained for the two cases. It is shown that since the low CCN case produces fewer droplets, larger sized develop due to the greater condensational and collectional growth, leading to a broader size spectrum in comparison to the high CCN case.

Tao, Wei-Kuo↗

Parameters Inference and Model Reduction for the Single-Particle Model of Li Ion Cells

The Single-Particle Model (SPM) of Li ion cell is a computationally efficient model for simulating Li ion cell for weak to moderate currents. The model depends n a number of parameters describing the geometry and material properties of a cell components. In order to apply the model to simulating a cell, the best-fit parametric values have to be inferred from a constant discharge data. We report our efforts to determine the best-fit set for 18650 LP batteries. We found that rather than being best-fit by a particular point in the parametric space the data is fit equally well by an ensemble of points clustering about an effective multidimensional manifold in the parametric space. This property of the SPM is known to be shared by a multitude of the so-called "sloppy models" of complex systems, characterized by a few stiff directions in the parametric space, in which the predicted behavior varies significantly, and a number of sloppy directions in which the behavior doesn't change appreciably. Only the stiff parameters combinations are identifiable. Geometrical features of the BFM give insights to possible reduction of the SPM to a model having fewer sloppy parameters. We have constructed a hierarchy of such models. The fully reduced model depends on only stiff effective parameters which are identifiable and can be used for characterization of the battery's state of health.

Khasin, Michael↗

Modeling Liquid Water by Climbing up Jacob’s Ladder in Density Functional Theory Facilitated by Using Deep Neural Network Potentials

Within the framework of Kohn–Sham density functional theory (DFT), the ability to provide good predictions of water properties by employing a strongly constrained and appropriately normed (SCAN) functional has been extensively demonstrated in recent years. Here, we further advance the modeling of water by building a more accurate model on the fourth rung of Jacob’s ladder with the hybrid functional, SCAN0. In particular, we carry out both classical and Feynman path-integral molecular dynamics calculations of water with the SCAN0 functional and the isobaric–isothermal ensemble. To generate the equilibrated structure of water, a deep neural network potential is trained from the atomic potential energy surface based on ab initio data obtained from SCAN0 DFT calculations. For the electronic properties of water, a separate deep neural network potential is trained by using the Deep Wannier method based on the maximally localized Wannier functions of the equilibrated trajectory at the SCAN0 level. The structural, dynamic, and electric properties of water were analyzed. The hydrogen-bond structures, density, infrared spectra, diffusion coefficients, and dielectric constants of water, in the electronic ground state, are computed by using a large simulation box and long simulation time. For the properties involving electronic excitations, we apply the GW approximation within many-body perturbation theory to calculate the quasiparticle density of states and bandgap of water. Compared to the SCAN functional, mixing exact exchange mitigates the self-interaction error in the meta-generalized-gradient approximation and further softens liquid water toward the experimental direction. For most of the water properties, the SCAN0 functional shows a systematic improvement over the SCAN functional. However, some important discrepancies remain. The H-bond network predicted by the SCAN0 functional is still slightly overstructured compared to the experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Finite-Temperature Structures of Supported Subnanometer Catalysts Inferred via Statistical Learning and Genetic Algorithm-Based Optimization

Single-atom catalysts (SACs) minimize noble metal utilization and can alter the activity and selectivity of supported metal nanoparticles. However, the morphology of active centers, including single atoms and subnanometer clusters of a few atoms, remains elusive due to experimental challenges. The computational cost to describe numerous cluster shapes and sizes makes direct first-principles calculations impractical. We present a computational framework to enable structure determination for single-atom and subnanometer cluster catalysts. As a case study, we obtained the low energy structures of Pd n (n = 1-21) clusters supported on CeO 2 (111), which are critical components of automobile three-way catalysts. Trained on density functional theory data, a three-dimensional cluster expansion is established using statistical learning to describe the Hamiltonian and predict energies of supported Pdn clusters of any structure. Low energy stable and metastable structures are identified using a Metropolis Monte Carlo-based genetic algorithm in the canonical ensemble at 300 K. We observe that supported single atoms sinter to form bilayer clusters and large cluster isomers share similarities in both shape and energy, and elucidate the significance of the support and microstructure on cluster stability. We discovered a simple surrogate structure-energy model, where the energy per atom scales with the square root of the average first coordination number, which can be used to estimate energies and compare the stability of clusters. Our framework, applicable to any metal/support system, fills an important methodological gap to predict the stability of supported metal catalysts in the subnanometer regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and Performance of Kokkos Staging Space toward Scalable Resilient Application Couplings

With the growing number of applications designed for heterogeneous HPC devices, application programmers and users are finding it challenging to compose scalable workflows as ensembles of these applications, that are portable, performant and resilient. The Kokkos C++ library has been designed to simplify this cumbersome procedure by providing an intra-application uniform programming model and portable performance. However, assembling multiple Kokkos-enabled applications into a complex workflow is still a challenge. Although Kokkos enables a uniform programming model, the inter-application data exchange still remains a challenge from both performance and software development cost perspectives. In order to address this issue, we propose Kokkos data staging memory space, an extension of Kokkos' data abstraction (memory space) for heterogeneous computing systems. This new abstraction allows to express data on a virtual shared-space for multiple Kokkos applications, thus extending Kokkos to support inter-application data exchange to build an efficient application workflow. Additionally, we study the effectiveness of asynchronous data layout conversions for applications requiring different memory access patterns for the shared data. Our preliminary evaluation with a synthetic benchmark indicate the effectiveness of this conversion adapted to three different scenarios representing access frequency and use patterns of the shared data.

97 MATHEMATICS AND COMPUTING↗

Microphysics in Goddard Multi-Scale Modeling Systems

Advances in computing power allow atmospheric prediction and general circulation models to be run at progressively finer scales of resolution, using increasingly more sophisticated physical parameterizations. The representation of cloud microphysical processes is one of key components of these models. In addition, over the past decade both research and operational numerical weather prediction models have started using more complex microphysical schemes that were originally developed for high-resolution cloud-resolving models (CRMs). In the paper, we described different microphysics schemes that are used in Goddard Multi-scale Modeling System. There are three major models, Goddard Cumulus Ensemble (GCE), NASA Unified Weather Research Forecast (NU-WRF) and Multi-scale Modeling Framework (MMF) model, in this modeling system. The microphysics schemes are Goddard three class ice (3ICE) and four class (4ICE) scheme, Morrison two moments (2M) 3ICE, Colorado State University Regional Atmospheric Modeling System (RAMS) 2M five class ice (5ICE) and spectral bin microphysics schemes. The performance of these schemes are examined and compared with radar and satellite observation. In addition, the inter-comparison with different microphysics schemes are conducted. Current and future observations needed for microphysics schemes evaluation as well as major characteristics of current microphysics are discussed.

Tao, W.-K.↗

Predicting the performance uncertainty of a 1-MW pilot-scale carbon capture system after hierarchical laboratory-scale calibration and validation

A challenging problem in designing pilot-scale carbon capture systems is to predict, with uncertainty, the adsorber performance and capture efficiency under various operating conditions where no direct experimental data exist. Motivated by this challenge, we previously proposed a hierarchical framework in which relevant parameters of physical models were sequentially calibrated from different laboratory-scale carbon capture unit (C2U) experiments. Specifically, three models of increasing complexity were identified based on the fundamental physical and chemical processes of the sorbent-based carbon capture technology. Results from the corresponding laboratory experiments were used to statistically calibrate the physical model parameters while quantifying some of their inherent uncertainty. The parameter distributions obtained from laboratory-scale C2U calibration runs are used in this study to facilitate prediction at a larger scale where no corresponding experimental results are available. In this paper, we first describe the multiphase reactive flow model for a sorbent-based 1-MW carbon capture system then analyze results from an ensemble of simulations with the upscaled model. The simulation results are used to quantify uncertainty regarding the design’s predicted efficiency in carbon capture. In particular, we determine the minimum gas flow rate necessary to achieve 90% capture efficiency with 95% confidence.

bubbling bed↗

An improved framework for the dynamic likelihood filtering approach to data assimilation

Here, we propose improvements to the Dynamic Likelihood Filter (DLF), a Bayesian data assimilation filtering approach, specifically tailored to wave problems. The DLF approach was developed to address the common challenge in the application of data assimilation to hyperbolic problems in the geosciences and in engineering, where observation systems are sparse in space and time. When these observations have low uncertainties, as compared to model uncertainties, the DLF exploits the inherent nature of information and uncertainties to propagate along characteristics to produce estimates that are phase aware as well as amplitude aware, as would be the case in the traditional data assimilation approach. Along characteristics, the stochastic partial differential equations underlying the linear or nonlinear stochastic dynamics are differential equations. This study focuses on developing the explicit challenges of relating dynamics and uncertainties in the Eulerian and Lagrangian frames via dynamic Gaussian processes. It also implements the approach using the ensemble Kalman filter (EnKF) and compares the DLF approach to the conventional one with respect to wave amplitude and phase estimates in linear and nonlinear wave problems. Numerical comparisons show that the DLF/EnKF outperforms the EnKF estimates, when applied to linear and nonlinear wave problems. This advantage is particularly noticeable when sparse, low uncertainty observations are used.

97 MATHEMATICS AND COMPUTING↗

Land cover change-induced decline in terrestrial gross primary production over the conterminous United States from 2001 to 2016

As one of the most dynamic aspects of global environmental change, land cover change (LCC) has a profound impact on terrestrial carbon sequestration. However, LCC-induced carbon fluxes are still the most uncertain terms in global and regional carbon budgets. Ecosystem gross primary production (GPP) is the total carbon uptake by vegetation through photosynthesis, serving as a major control on ecosystem function and land carbon balance during and after the modification of the land surface. However, accurately capturing LCC-induced GPP changes requires both high-quality land cover data and controlling for variation driven by other environmental factors such as climate. In this study, we comprehensively examined the effects of LCC on annual GPP trends over the conterminous United States (CONUS) from 2001 to 2016 using the USGS National Land Cover Database, a remote sensing-driven ecosystem model, and the Google Earth Engine cloud computing platform. We designed a series of model experiments to identify LCC effects on GPP by controlling climate effects. During the study period, LCC exerted a strong negative effect on total GPP across the CONUS ([-2.2, -1.8] Tg C yr -2 ), while climate had smaller positive effects ([0.17, 0. 92] Tg C yr -2 ). The LCC-induced reduction of GPP was mainly caused by net forest loss ([-1.98, -1.39] Tg C yr -2 ) and urban expansion ([-2.03, -1.92] Tg C yr -2 ), but was partially offset by increases in crop area ([+0.66, +0.79] Tg C yr -2 ). Ensemble simulations from TRENDY did not capture the strong negative LCC influences on GPP, likely due to limitations of the adopted land use/cover data. Overall, our study provides a novel perspective on LCC-induced GPP changes, which could help to improve our understanding of ecosystem function changes and constrain the estimation of land carbon balance in the context of anthropogenic activity and climate change.

54 ENVIRONMENTAL SCIENCES↗

String flash-boiling in gasoline direct injection simulations with transient needle motion

A computational study was performed to investigate the influence of transient needle motion on gasoline direct injection (GDI) internal nozzle flow and near-field sprays. Simulations were conducted with a compressible Eulerian flow solver modeling liquid, vapor, and non-condensable gas phases with a diffuse interface. Variable rate generation and condensation of fuel vapor were captured using the homogeneous relaxation model (HRM). The non-flashing (spray G) and flashing (spray G2) conditions specified by the Engine Combustion Network were modeled using the nominal spray G nozzle geometry and transient needle lift and wobble were based upon ensemble averaged x-ray imaging preformed at Argonne National Lab. The minimum needle lift simulated was 5 μm and dynamic mesh motion was achieved with Laplacian smoothing. The results were qualitatively validated against experimental imaging and the experimental rate of injection profile was captured accurately using pressure boundary conditions and needle motion to actu- ate the injection. Needle wobble was found to have no measurable effect on the flow. Low needle lift is shown to result in vapor generation as fuel rushes past the needle. In conclusion, the internal injector flow is shown to contain many transient and interacting vortices which cause perturbations in the spray angle, fluctuations in the mass flux, and frequently result in string flash-boiling.

33 ADVANCED PROPULSION SYSTEMS↗

Uncertainty Quantification in Climate Modeling and Projection

The projection of future climate is one of the most complex problems undertaken by the scientific community. Although scientists have been striving to better understand the physical basis of the climate system and to improve climate models, the overall uncertainty in projections of future climate has not been significantly reduced (e.g., from the IPCC AR4 to AR5). With the rapid increase of complexity in Earth system models, reducing uncertainties in climate projections becomes extremely challenging. Since uncertainties always exist in climate models, interpreting the strengths and limitations of future climate projections is key to evaluating risks, and climate change information for use in Vulnerability, Impact, and Adaptation (VIA) studies should be provided with both well-characterized and well-quantified uncertainty. The workshop reported herein aimed at providing participants, many of them from developing countries, information on strategies to quantify the uncertainty in climate model projections and assess the reliability of climate change information for decision-making. The program included a mixture of lectures on fundamental concepts in Bayesian inference and sampling, applications, and hands-on computer laboratory exercises employing software packages for Bayesian inference, Markov Chain Monte Carlo methods, and global sensitivity analyses. The lectures covered a range of scientific issues underlying the evaluation of uncertainties in climate projections, such as the effects of uncertain initial and boundary conditions, uncertain physics, and limitations of observational records. Progress in quantitatively estimating uncertainties in hydrologic, land surface, and atmospheric models at both regional and global scales was also reviewed. The application of Uncertainty Quantification (UQ) concepts to coupled climate system models is still in its infancy. The Coupled Model Intercomparison Project (CMIP) multi-model ensemble currently represents the primary data for assessing reliability and uncertainties of climate change information. An alternative approach is to generate similar ensembles by perturbing parameters within a single-model framework. One of workshop’s objectives was to give participants a deeper understanding of these approaches within a Bayesian statistical framework. However, there remain significant challenges still to be resolved before UQ can be applied in a convincing way to climate models and their projections.

54 ENVIRONMENTAL SCIENCES↗

Designing Experiments Through Compressed Sensing

In the following paper, we discuss how to design an ensemble of experiments through the use of compressed sensing. Specifically, we show how to conduct a small number of physical experiments and then use compressed sensing to reconstruct a larger set of data. In order to accomplish this, we organize our results into four sections. We begin by extending the theory of compressed sensing to a finite product of Hilbert spaces. Then, we show how these results apply to experiment design. Next, we develop an efficient reconstruction algorithm that allows us to reconstruct experimental data projected onto a finite element basis. Finally, we verify our approach with two computational experiments.

Young, Joseph G.↗

Precipitation processes developed during TOGA COARE (1992), GATE (1974), SCSMEX (1998), and KWAJEX (1999): 3D Cloud Resolving Model Simulation

Real clouds and cloud systems are inherently three-dimensional (3D). Because of the limitations in computer resources, however, most cloud-resolving models (CRMs) today are still two-dimensional (2D). A few 3D CRMs have been used to study the response of clouds to large-scale forcing. In these 3D simulations, the model domain was small, and the integration time was 6 hours. Only recently have 3D experiments been performed for multi-day periods for tropical cloud systems with large horizontal domains at the National Center for Atmospheric Research (NCAR), NOAA GFDL, the U.K. Met. Office, Colorado State University and NASA Goddard Space Flight Center. An improved 3D Goddard Cumulus Ensemble (GCE) model was recently used to simulate periods during TOGA COARE (December 19-27, 1992), GATE (september 1-7, 1974), SCSMEX (May 18-26, June 2-11, 1998) and KWAJEX (August 7-13, August 18-21, and August 29-September 12, 1999) using a 512 by 512 km domain and 41 vertical layers. The major objectives of this paper are: (1) to identify the differences and similarities in the simulated precipitation processes and their associated surface and water energy budgets in TOGA COARE, GATE, KWAJEX, and SCSMEX, and (2) to asses the impact of microphysics, radiation budget and surface fluxes on the organization of convection in tropics.

Tao, W.-K.↗

Context-aided analysis of community evolution in networks

Here, we are interested in detecting and analyzing global changes in dynamic networks (networks that evolve with time). More precisely, we consider changes in the activity distribution within the network, in terms of density (ie, edge existence) and intensity (ie, edge weight). Detecting change in local properties, as well as individual measurements or metrics, has been well studied and often reduces to traditional statistical process control. In contrast, detecting change in larger scale structure of the network is more challenging and not as well understood. We address this problem by proposing a framework for detecting change in network structure based on separate pieces: a probabilistic model for partitioning nodes by their behavior, a label-unswitching heuristic, and an approach to change detection for sequences of complex objects. We examine the performance of one instantiation of such a framework using mostly previously available pieces. The dataset we use for these investigations is the publicly available New York City Taxi and Limousine Commission dataset covering all taxi trips in New York City since 2009. Using it, we investigate the evolution of an ensemble of networks under different spatiotemporal resolutions. We identify the community structure by fitting a weighted stochastic block model. In conclusion, we offer insights on different node ranking and clustering methods, their ability to capture the rhythm of life in the Big Apple, and their potential usefulness in highlighting changes in the underlying network structure.

97 MATHEMATICS AND COMPUTING↗

Uncertainty quantification for deep learning in particle accelerator applications

With the advent of increased computational resources and improved algorithms, machine learning-based models are being increasingly applied to complex problems in particle accelerators. However, such data-driven models may provide overly confident predictions with unknown errors and uncertainties. For reliable deployment of machine learning models in high-regret and safety-critical systems such as particle accelerators, estimates of prediction uncertainty are needed along with accurate point predictions. In this investigation, we evaluate Bayesian neural networks (BNN) as an approach that can provide accurate predictions along with reliably quantified uncertainties for particle accelerator problems, and compare their performance with bootstrapped ensembles of neural networks. We select three accelerator setups for this evaluation: a storage ring, a photoinjector, and a linac. The problems span different data volumes and dimensionalities (e.g., scalar predictions as well as image outputs). It is found that BNN provide accurate predictions of the mean along with reliable estimates of predictive uncertainty across the test cases. In this vein, BNN may offer an attractive alternative to deterministic deep learning tools to generate accurate predictions with quantified uncertainties in particle accelerator applications.

43 PARTICLE ACCELERATORS↗

Modeling stochastic fluctuations in relativistic kinetic theory

Using the information current, we develop a Lorentz-covariant framework for modeling equilibrium fluctuations in relativistic kinetic theory in the grand-canonical ensemble. The resulting stochastic theory is proven to be causal and covariantly stable, and its predictions do not depend on the choice of spacetime foliation used to define the grand-canonical probabilities. As expected, in a box containing N > 5 particles, Boltzmann’s molecular chaos postulate is broken with (almost exact) probability N -1/2 , leading to a breakdown of the Boltzmann equation in small systems. Here, we also verify that, in ultrarelativistic gases, transient hydrodynamics already accounts for at least 80% of the equilibrium fluctuations of the stress-energy tensor at a given time. Finally, we compute the correlators at nonequal times for two selected collision kernels: that of a chemically active diluted solution, and that of ultrarelativistic scalar particles self-interacting via a quartic potential. For the former, we compute the density-density correlators analytically in real space, and dehydrodynamization of the stochastic theory is proven to occur whenever the mean free path diverges at high energy.

Astronomy & Astrophysics↗

Evaluating an Earth system model from a water manager perspective

Abstract. The large spatial scale of global Earth system models (ESMs) is often cited as an obstacle to using the output by water resource managers in localized decisions. Recent advances in computing have improved the fidelity of hydrological responses in ESMs through increased connectivity between model components. However, the models are seldom evaluated for their ability to reproduce metrics that are important for and resonate with practitioners or that allow practitioners to situate higher-resolution model outputs within a cascade of uncertainty stemming from different models and scenarios. We draw on the combined experience of the author team and water manager workshop participants to identify salient water management metrics and evaluate whether they are credibly reproduced over the conterminous USA by the Community Earth System Model v2 (CESM2) Large Ensemble. We find that, while the exact values may not match the observations, aspects such as interannual variability can be reproduced by CESM2 for the mean wet day precipitation and length of dry spells. CESM2 also captures the proportion of total annual precipitation that derives from the heaviest rain days in watersheds that are not snow-dominated. Aggregating the 7 d mean daily runoff to two-digit Hydrological Unit Code (HUC2) watersheds also shows that rain-dominated regions capture the timing and interannual variability of annual maximum and minimum flows. We conclude that there is potential for far greater use of large-ensemble ESMs, such as CESM2, in long-range water management decisions to supplement high-resolution regional projections.

Tye, Mari R. (ORCID:0000000324911020)↗

Self-synchronization in an ensemble of nonlinear oscillators

The paper describes the results of study of a system of coupled nonlinear, Duffing-type oscillators, from the viewpoint of their self-synchronization, i.e., generation of a coherent field (order parameter) via instability of an incoherent (random-phase) initial state. We consider both the cases of dissipative coupling (e.g., via the joint radiation) and reactive coupling in a Hamiltonian system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗