Search NASA⌕ Search

SEARCH · Search NASA

Results for “FASTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

SAS4A model development for the analysis of postulated severe accidents in metal fuel sodium fast reactors

The SAS4A code has been designed to simulate the events that occur in Sodium Fast Reactor (SFR) during the initiating phase of severe unprotected accidents. The initial SAS4A models were focused on the behavior of oxide fuel cores. An effort to expand the SAS4A models for the analysis of metal fuel cores is currently underway. This paper describes the status of the SAS4A metal fuel model development and presents initial results from the simulation of a postulated fuel assembly blockage accident in the Prototype Gen-IV Sodium Fast Reactor (PGSFR). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Fast Reactor Core Analysis Using AZNHEX Neutron Diffusion Code

The AZTLAN platform project emerged as an initiative to rank Mexico at a competitive level in software aspects for the analysis of nuclear reactors, in an effort to achieve autonomy in this area. The AZTLAN platform is conformed by a thermo-hydraulic code (AZTHECA), a neutron transport code (AZTRAN) and two neutron diffusion codes (AZKIND, AZNHEX). AZNHEX is a 3D diffusion code that solves numerically the time dependent neutron diffusion equations in hexagonal z-geometry using the RTN0 nodal finite element method. With this code, it is possible to simulate and analyze light water reactors, such as the Russian VVER, and variety of fast reactors. In this work, a sodium-cooled fast reactor core in steady state, with control rods fully withdrawn, is simulated. The comparison and validation of the values obtained with AZNHEX was done with the results obtained with MCNP6 Monte Carlo code.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A CFD M&S PROCESS FOR FAST REACTOR FUEL ASSEMBLIES

A CFD modeling and simulation process for large-scale problems using an arbitrary fast reactor fuel assembly design was evaluated. Three dimensional flow distributions of sodium for several fast reactor fuel assembly pin spacing configurations were simulated on high performance computers using commercial CFD software. This research focused on 19-pin fuel assembly “benchmark” geometry, similar in design to the Advanced Burner Test Reactor, where each pin is separated by helical wire-wrap spacers. Several two-equation turbulence models including the k-e and SST (Menter) k-? were evaluated. Considerable effort was taken to resolve the momentum boundary layer, so as to eliminate the need for wall functions and reduce computational uncertainty. High performance computers were required to generate the hybrid meshes needed to predict secondary flows created by the wire-wrap spacers; computational meshes ranging from 65 to 85 million elements were common. A general validation methodology was followed, including mesh refinement and comparison of numerical results with empirical correlations. Predictions for velocity, temperature, and pressure distribution are shown. The uncertainty of numerical models, importance of high fidelity experimental data, and the challenges associated with simulating and validating large production-type problems are presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Superconducting gamma and fast-neutron spectrometers with high energy resolution

Superconducting Gamma-ray and fast-neutron spectrometers with very high energy resolution operated at very low temperatures are provided. The sensor consists of a bulk absorber and a superconducting thermometer weakly coupled to a cold reservoir, and determines the energy of the incident particle from the rise in temperature upon absorption. A superconducting film operated at the transition between its superconducting and its normal state is used as the thermometer, and sensor operation at reservoir temperatures around 0.1 K reduces thermal fluctuations and thus enables very high energy resolution. Depending on the choice of absorber material, the spectrometer can be configured either as a Gamma-spectrometer or as a fast-neutron spectrometer.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Clad and duct materials property needs for sodium fast reactors: US perspective

In the Advanced Fuel Cycle Initiative, the clad and duct materials property needs are driven by the program direction of using a fast reactor to transmute minor actinides. To economically perform transmutation requires fuels to be irradiated to at least 200/0 burnup before discharge and recycle. The cladding materials used in sllch high dose irradiations will experience at least 200 dpa of exposure. The requirements are that the cladding must contain the fuel until discharge and the duct must maintain ductility and mechanical strength to direct the sodium coolant and withdraw the fuel at discharge. Presently, achieving a bumup of 20% in fast reactor fuels is a significant challenge. The materials property needs for clad materials are the following in order of importance: (1) Radiation resistance: the material must be tolerant of radiation damage up to 200 dpa or greater depending on the final burnup desired at temperatures ranging from 350-600 C (temperature range for maximum dose is 400-500 C). Thus, the material must be tolerant of swelling, irradiation creep, and embrittlement effects. (2) Mechanical properties: tensile properties (strength, ductility), creep resistance, fracture toughness and fatigue resistance must all sufficient to contain the fuel during irradiation and discharge. (3) Fuel Clad Chemical Interaction: the cladding must be resistant to chemical interaction with the fuel during irradiation to prevent clad failure. (4) Fabrication and joining: the material must be able to be fabricated into component parts and joined to contain the fuel during the irradiation and during discharge. (5) Corrosion resistance: the material must be tolerant of the sodium coolant, with minimal corrosion rate. (6) Reprocessing: the cladding must be dissolvable to enable fuel reprocessing. (7) Long-term stability: the clad and duct materials must be stable through 6 or more years of irradiation depending on the final fuel burnup desired. (8) Thermal properties: thermal conductivity and thermal expansion are important to maintain desired fuel temperatures during irradiation. (9) Neutronic properties: low neutron absorption is required. (10) Material availability: enough raw material must be readily available. (11) Economics: the cost of the material must be considered but is not a significant driver.

36 MATERIALS SCIENCE↗

Laboratory demonstration of slow rise to fast acceleration of arched magnetic flux ropes

In this paper, we demonstrate the slow rise to fast acceleration of an arched plasma-filled magnetic flux rope. The flux rope expansion is inhibited by an externally applied customizable strapping field. When the strapping field is not too strong and not too weak, expansion forces build up while the flux rope is in the strapping field region. When the flux rope moves to a critical height beyond the peak strapping field region, the plasma accelerates quickly corresponding to the observed slow rise to fast acceleration of solar eruptions. Finally, this behavior is in agreement with the predictions of the torus instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast Room-Temperature Mg-Ion Conduction in Clay-Like Halide Glassy Electrolytes

The discovery of mechanically soft solid-state materials with fast Mg-ion conduction is crucial for the development of solid-state magnesium batteries. In this paper, novel magnesium gallium halide compounds are reported that achieve high ionic conductivity of 0.47 mS cm -1 at room temperature. These Mg-ion conductors obtained by ball milling Mg and Ga salts exhibit clay-like mechanical properties, enabling intimate contact at the electrode–electrolyte interface during battery cycling. With a combination of experimental and computational analysis, this study identifies that the soft-clay formation is induced by partial anion exchange during milling. This partial anion exchange creates undercoordinated magnesium ions in a chlorine-rich environment, yielding fast Mg-ion conduction. This work demonstrates the potential of clay-like halide electrolytes for all-solid-state magnesium batteries, with possible further extension to other multivalent battery systems.

36 MATERIALS SCIENCE↗

Open source implementation of glued sphere discrete element method and nonspherical biomass fast pyrolysis simulation

Here, in this research, a glued-sphere Discrete Element Method (DEM) method was implemented in the open-source, Computational Fluid Dynamics (CFD) software MFiX. The implementation was verified using a cylinder-wall collision and then validated by simulating the packing and fluidization of non-spherical particles. The validated code was applied to simulate fast pyrolysis of non-spherical biomass particles in a bubbling fluidized bed. The glued sphere occupancy ratio was proposed to quantify the quality of shape resolution using glued sphere. Shape resolution showed significant influence on the packing height in the simulation of particle packing and an occupancy ratio of 80 % was recommended. Its influence is minor in fully fluidized bed but can be 8 times higher in fixed fluidized bed. Three tested heat transfer models predicted similar yields of elongated biomass fast pyrolysis. The solver developed in this research can be used to simulate other multiphase reacting flows involving non-spherical particles.

42 ENGINEERING↗

A rigorous process modeling methodology for biomass fast pyrolysis with an entrained-flow reactor

A biomass fast pyrolysis model was developed for implementation in equation-oriented modeling software. Based on a previous framework of coupled 1-dimensional mass, momentum, and heat balance equations, this model includes updated reaction kinetics to provide a more detailed representation of biomass components, intermediates, and products. A recently published derivation of thermodynamic properties for the species in this model has allowed the energy balance around the pyrolysis reactor to be rigorously redefined. With these improvements, the optimum pyrolysis temperature for bio-oil production predicted by the model is increased by up to 50°C, bringing it in line with experimental data and increasing the overall agreement. More importantly, the reactor energy balance is strictly enforced. The resulting model can be used for the design and optimization of biomass fast pyrolysis processes, and comparisons with other options for biomass utilization.

09 BIOMASS FUELS↗

Electroless Formation of Hybrid Lithium Anodes for Fast Interfacial Ion Transport

Abstract Rechargeable batteries based on metallic anodes are of interest for fundamental and application‐focused studies of chemical and physical kinetics of liquids at solid interfaces. Approaches that allow facile creation of uniform coatings on these metals to prevent physical contact with liquid electrolytes, while enabling fast ion transport, are essential to address chemical instability of the anodes. Here, we report a simple electroless ion‐exchange chemistry for creating coatings of indium on lithium. By means of joint density functional theory and interfacial characterization experiments, we show that In coatings stabilize Li by multiple processes, including exceptionally fast surface diffusion of lithium ions and high chemical resistance to liquid electrolytes. Indium coatings also undergo reversible alloying reactions with lithium ions, facilitating design of high‐capacity hybrid In‐Li anodes that use both alloying and plating approaches for charge storage. By means of direct visualization, we further show that the coatings enable remarkably compact and uniform electrodeposition. The resultant In‐Li anodes are shown to exhibit minimal capacity fade in extended galvanostatic cycling when paired with commercial‐grade cathodes.

Choudhury, Snehashis↗

Building Organic/Inorganic Hybrid Interphases for Fast Interfacial Transport in Rechargeable Metal Batteries

Abstract We report a facile in situ synthesis that utilizes readily accessible SiCl 4 cross‐linking chemistry to create durable hybrid solid–electrolyte interphases (SEIs) on metal anodes. Such hybrid SEIs composed of Si‐interlinked OOCOR molecules that host LiCl salt exhibit fast charge‐transfer kinetics and as much as five‐times higher exchange current densities, in comparison to their spontaneously formed analogues. Electrochemical analysis and direct optical visualization of Li and Na deposition in symmetric Li/Li and Na/Na cells show that the hybrid SEI provides excellent morphological control at high current densities (3–5 mA cm −2 ) for Li and even for notoriously unstable Na metal anodes. The fast interfacial transport attributes of the SEI are also found to be beneficial for Li‐S cells and stable electrochemical cycling was achieved in galvanostatic studies at rates as high as 2 C. Our work therefore provides a promising approach towards rational design of multifunctional, elastic SEIs that overcome the most serious limitations of spontaneously formed interphases on high‐capacity metal anodes.

Zhao, Qing↗

Electroless Formation of Hybrid Lithium Anodes for Fast Interfacial Ion Transport

Abstract Rechargeable batteries based on metallic anodes are of interest for fundamental and application‐focused studies of chemical and physical kinetics of liquids at solid interfaces. Approaches that allow facile creation of uniform coatings on these metals to prevent physical contact with liquid electrolytes, while enabling fast ion transport, are essential to address chemical instability of the anodes. Here, we report a simple electroless ion‐exchange chemistry for creating coatings of indium on lithium. By means of joint density functional theory and interfacial characterization experiments, we show that In coatings stabilize Li by multiple processes, including exceptionally fast surface diffusion of lithium ions and high chemical resistance to liquid electrolytes. Indium coatings also undergo reversible alloying reactions with lithium ions, facilitating design of high‐capacity hybrid In‐Li anodes that use both alloying and plating approaches for charge storage. By means of direct visualization, we further show that the coatings enable remarkably compact and uniform electrodeposition. The resultant In‐Li anodes are shown to exhibit minimal capacity fade in extended galvanostatic cycling when paired with commercial‐grade cathodes.

Choudhury, Snehashis↗

Open‐Source Anaerobic Digestion Modeling Platform, Anaerobic Digestion Model No. 1 Fast (ADM1F)

An open‐source modeling platform, called Anaerobic Digestion Model No. 1 Fast (ADM1F), is introduced to achieve fast and numerically stable simulations of anaerobic digestion processes. ADM1F is compatible with an iPython interface to facilitate model configuration, simulation, data analysis, and visualization. Faster simulations and more stable results are accomplished by implementing an advanced open‐source library of numerical methods called Portable Extensive Toolkit for Scientific Computation (PETSc) to solve the ADM1 system of equations. Leveraging PETSc, ADM1F can consistently complete a steady‐state simulation under 0.2 s, over 99% faster than a benchmark ADM1 model implemented with MATLAB while achieving agreement of model outputs within 1% of those obtained with the benchmark model. For dynamic simulations, however, ADM1F has a computational speed advantage only when the influent characteristics update more frequently than every 4 h. The ability of ADM1F to be useful as a tool to study anaerobic digestion systems is demonstrated through two example implementations of ADM1F: (1) a two‐phase co‐digestion scenario evaluating the impact of the organic loading rate and the substrate composition on reactor performance and stability, and (2) a conventional digester scenario assessing the effectiveness of recovery strategies after disruptions that led to instability. These examples demonstrate how the high simulation speed and the convenience of the iPython interface allow ADM1F to complete complex analyses within minutes, much faster than computational strategies currently reported in the literature.

anaerobic co-digestion↗

Metastable‐State Photoacids with Fast Reverse Reactions

Metastable-state photoacid (mPAH) has become a common tool for controlling and driving chemical processes with light. mPAHs with fast reverse reactions are desirable for precise temporal control or generating quick pulses of proton concentration. Here, in this work, different approaches towards fast reversing mPAHs are studied. Experimental and computational results showed that stabilizing the charge–transfer intermediate is an effective way to increase the rate. A novel mPAH with a reverse reaction ≈500 times faster than the most used mPAH in methanol is developed. Another water-soluble mPAH showed a reverse reaction with a rate constant of 7.8 s −1 , which is the fastest ever reported. The half-life of the acidic state is calculated to be 89 ms, which allowed to demonstrate sub-second switching using this mPAH.

Abbood, Rana [Florida Institute of Technology, Mel↗

An Algal Nutrient‐Replete, Optimized Medium for Fast Growth and High Triacylglycerol Accumulation

Microalgae are promising sources to sustainably meet the global needs for energy and products. Algae grow under different trophic conditions, where nutritional status regulates biosynthetic pathways, energy production, and growth. The green alga Chromochloris zofingiensis has strong economic potential because it co-produces biofuel precursors and the high-value antioxidant astaxanthin while accumulating biomass when grown mixotrophically. As an emerging reference alga for photosynthesis, metabolism, and bioproduction, C. zofingiensis needs a defined, optimized medium to standardize experiments during fast growth for batch cultivation. Because the interplay of glucose treatment (+Glc) and mineral deficiency influences photosynthesis, growth, and the production of lipids and astaxanthin, we designed a replete nutrient medium tailored to the C. zofingiensis cellular ionome. We combined inductively coupled plasma mass spectrometry (ICP-MS) and +Glc growth curves to determine a medium that is nutrient replete for at least 5 days of +Glc logarithmic growth. We found that there are high nutritional needs for phosphorus and sulfur during mixotrophy. Iron was the only element measured for which the cellular concentration correlated with exogenous concentration and was iteratively adjusted until the cellular ionome was consistent through the logarithmic growth phase. This Chromochloris-Optimized Ratio of Elements (CORE) medium supports fast growth and high biomass and lipid accumulation without causing excess nutrient toxicity. This defined, nutrient-replete standard is important for future C. zofingiensis investigations and can be adapted for other species to support high biomass for batch cultivation. The method used to develop CORE medium shows how ionomics informs replicable media design and may be applied in industrial settings to inform cost-effective biofuel production.

Jeffers, Tim L. [University of California, Berkele↗

Gaussian mixture models as automated particle classifiers for fast neutron detectors

Pulse shape discrimination (PSD) is the task of classifying electronic pulse shapes for different particle types such as gamma rays and fast neutrons interacting in scintillators and read out by photo sensitive detectors. This field has been limited in its adoption of techniques found in the statistical learning community. Methods initially employed in the 1960s for analog electronic circuitry persist in the current PSD literature describing operations performed on digitized pulses, which are amenable to statistical rigor. Despite vast amounts of data collected at low energy levels, traditional PSD methods are unable to discriminate particles below a certain threshold. As such, in this work, Gaussian mixture models (GMMs) are used as a clustering technique for fast neutron detection in the absence of labeled data. GMMs yield improvements spanning the energy spectrum in a desirably efficient, unsupervised fashion. An extension, the Dirichlet Process GMM, provides further flexibility and classification improvement.

97 MATHEMATICS AND COMPUTING↗

Transportation fuels from biomass via fast pyrolysis and hydroprocessing

Biomass is a renewable source of carbon, which could provide a means to reduce the greenhouse gas impact from fossil fuels in the transportation sector. Biomass is the only renewable source of liquid fuels, which could displace petroleum-derived products. Fast pyrolysis is a method of direct thermochemical conversion (non-bioconversion) of biomass to a liquid product. Although the direct conversion product, called bio-oil, is liquid; it is not compatible with the fuel handling systems currently used for transportation. Upgrading the product via catalytic processing with hydrogen gas, hydroprocessing, is a means that has been demonstrated in the laboratory. By this processing the bio-oil can be deoxygenated to hydrocarbons, which can be useful replacements of the hydrocarbon distillates in petroleum. While the fast pyrolysis of biomass is presently commercial, the upgrading of the liquid product by hydroprocessing remains in development, although it is moving out of the laboratory into scaled-up process demonstration systems.

bio-oil↗

Characterization of renal stone composition by using fast kilovoltage switching dual-energy computed tomography compared to laboratory stone analysis: a pilot study

Purpose: To prospectively examine the diagnostic performance of fast kilovoltage switching dual-energy computed tomography (DECT) in characterization of in vivo renal stone composition compared with postoperative stone analysis. Methods: Consecutive consenting patients scheduled for endoscopic kidney stone surgery in a tertiary referral hospital from June 2015 to January 2016 were enrolled. Patients were preoperatively scanned with single-source, fast kilovoltage switching DECT. Stone compositions were determined regarding the effective atomic number measurements. Results of the stone compositions from DECT were compared to postoperative infrared spectroscopy stone analysis as the standard reference. Results: For the 39 patients enrolled in the study, DECT was able to detect uric acid stone with sensitivity of 88.9% and specificity of 100%. There was 100% positive predictive value, 96.8% negative predictive value, and 97.4% accuracy. For non-contrast CT scan, sensitivity was 88.9%, specificity was 96.7%, positive predictive value was 88.9%, negative predictive value was 96.7%, and accuracy was 94.8%. Of the 39 samples examined, 21 (54%) were single composition, whereas 18 (46%) were combined. Single composition stones were correctly characterized by DECT in 100% (8/8) for uric acid. Whereas the result of uric acid stone containing stone discrimination in mixed composition was not so good with Z{sub eff} alone, iodine imaging can compensated this fault. Conclusions: DECT provides excellent accuracy in characterizing uric acid stone compositions. With the addition of iodine image, all of uric acid-containing stones can be determined by the DECT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗