Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOSSIL FUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

A Biomass Pyrolysis Oil as a Novel Insect Growth Regulator Mimic for a Variety of Stored Product Beetles

Abstract As fumigants face increasing regulatory restrictions, resistance, and consumer pushback, it is vital to expand the integrated pest management (IPM) chemical toolkit for stored products. The production of biomass derived insecticides (e.g., bio-oil fraction) from byproducts of biofuel production may be a promising alternative source of chemistries for controlling stored product insects. These potential insecticidal bio-oils were fractionated based on boiling points (ranging from 115 to 230°C in one series and 245–250°C in another). Fractions were analyzed using GC-MS, and were found to be unique in composition. The lethality of these fractions was tested on Tribolium castaneum, Tribolium confusum, and Oryzaephilus surinamensis (L.) (Coleoptera: Silvanidae). Fractions were tested at concentrations ranging from 5–260 mg/ml to screen for efficacy against adults for durations of 2–8 hr sprayed on concrete arenas. In addition, a separate assay evaluated adult emergence of larvae after 6 wk with supplemental food in arenas, while repellency was evaluated against four stored product insect species in a laminar wind tunnel. A greenhouse gas (GHG) emissions life cycle assessment was also performed, which found the use of the bio-oil fraction could reduce GHG emissions associated with the insecticide supply chain by 25–61% relative to a fossil-fuel based insecticide or pyrethroid. While adults were largely unaffected, we found that larval emergence was significantly suppressed compared to controls by roughly half or more. We also determined that there was minimal repellency to most fractions by most species. We conclude that the use of bio-oil fractions is a climate-friendly choice that may support IPM programs.

09 BIOMASS FUELS↗

A pilot oral history of plant synthetic biology

The whole field of synthetic biology (SynBio) is only about 20 years old, and plant SynBio is younger still. Nevertheless, within that short time, SynBio in general has drawn more scientific, philosophical, government, and private-sector interest than anything in biology since the recombinant DNA revolution. Plant SynBio, in particular, is now drawing more and more interest in relation to plants’ potential to help solve planetary problems such as carbon capture and storage and replacing fossil fuels and feedstocks. As plant SynBio is so young and so fast-developing, we felt it was too soon to try to analyze its history. Instead, we set out to capture the essence of plant SynBio's origins and early development through interviews with 8 of the field's founders, representing 5 countries and 3 continents. We then distilled these founders’ personal recollections and reflections into this review, centering the narrative on timelines for pivotal events, articles, funding programs, and quoting from interviews. We have archived the interview recordings and documented timeline entries. This work provides a resource for future historical scholarship.

59 BASIC BIOLOGICAL SCIENCES↗

In-Situ Metabolomic Analysis of Setaria viridis Roots Colonized by Beneficial Endophytic Bacteria

Over the past decades, crop yields have risen in parallel with increasing use of fossil-fuel derived nitrogen (N) fertilizers, but with concomitant negative impacts on climate and water resources. There is a need for more sustainable agricultural practices, and biological nitrogen fixation (BNF) could be part of the solution. A variety of nitrogen-fixing, epiphytic and endophytic plant growth promoting bacteria (PGPB) are known to stimulate plant growth. However, compared to the rhizobium-legume symbiosis, little mechanistic information is available as to how PGPB affect plant metabolism. Therefore, we investigated the metabolic changes in roots of the model grass species Setaria viridis upon endophytic colonization by Herbaspirillum seropedicae SmR1 (fix + ) or a fix - mutant strain (SmR54), compared to uninoculated roots. Endophytic colonization of the root is highly localized and, hence, analysis of whole root segments dilutes the metabolic signature of those few cells impacted by the bacteria. Therefore, we utilized in situ laser ablation electrospray ionization mass spectrometry (LAESI-MS) to sample only those root segments at or adjacent to the sites of bacterial colonization. We report netabolites involved in purine, zeatin, and riboflavin pathways were significantly more abundant in inoculated plants while metabolites indicative of nitrogen, starch, and sucrose metabolism were reduced in roots inoculated with the fix - strain or uninoculated, presumably due to N limitation. Interestingly, compounds, involved in indole-alkaloid biosynthesis were more abundant in the roots colonized by the fix - strain, perhaps reflecting a plant defense response.

59 BASIC BIOLOGICAL SCIENCES↗

Functional characterization of three GH10 xylanases

Decreased availability of fossil fuels has driven an increased demand for sustainable energy sources such as biofuels. One area of bioenergy research involves development of biocatalysts able to efficiently degrade biomass “waste”‐products, such as substrates derived from corn stover, rather than easily‐fermentable biomass used for food, such as starch from corn kernels. Xylanases are of interest for their ability to hydrolyze hemicellulosic sugars found in plant cell walls, allowing utilization of waste‐derived biomass. In this study, three xylanases of glycoside hydrolase family 10 (GH10) are functionally characterized and optimized for temperature and pH, as well as kinetically analyzed for xylose monomer and oligomer production. These enzymes, GH10‐4, GH10‐9, and GH10‐15, demonstrate activity upon substrates xylan and arabinoxylan. For GH10‐4, optima are 50°C at pH 8 on xylan and 45°C at pH 8 on arabinoxylan. For GH10‐9, optima are 70°C at pH 5 on xylan and 70°C at pH 5 on arabinoxylan. For GH10‐15, optima are 50°C at pH 8 on xylan and 45°C at pH 5 on arabinoxylan. Kinetic analysis reveals GH10‐4 produces xylose (X1), xylobiose (X2), xylotriose (X3), xylotetraose (X4), and xylopentaose (X5) from xylan, while GH10‐9 and GH10‐15 produce X1, X2, and X3. From arabinoxylan, GH10‐4 produces X1, X2, X3, X4, while GH10‐9 and GH10‐15 produce X1, X2, X3. Conclusive kinetic data may suggest applicability of these enzymes for industrial use within biocatalysts and contribute further insight to the functionality of enzymes within GH10. Support or Funding Information The authors are grateful for financial support by the Integrated Biological Sciences Summer Research Program (IBS‐SRP, NSF) at the University of Wisconsin‐Madison and the Great Lakes Bioenergy Research Center (GLBRC) of the U.S. Department of Energy. Presentation travel support is provided by the Ronald E. McNair Scholars Program of Winthrop University. The authors also thank Lai Bergeman, Craig Bingman, Bob Smith, Emily Beebe, Kirk Vander Meulen, Amber Smith, David Wassarman, and John Greenler for professional support.

Park, Jesslyn↗

Enabling Technology for Energy Sustainability: Power Electronic Converter Control for Renewables

To ensure high penetration of renewable energy sources into power grids, their interfacing inverters need to be designed to provide grid support functions. Important grid support functions include frequency and voltage support. To this end, the research community has recently invested heavily on grid-forming control pilot projects. Grid forming control aims to replace traditional grid following control, which is based on phase-locked loop and can achieve decoupled real and reactive power control. Here, in this article, we review the state-of-the-art grid following and forming technology and point out some deficiencies in dynamic performance in the widely adopted grid-forming control design. We also examine how to ensure that the vector control capable of decoupled real and reactive power regulation can also be achieved in the grid forming design. This type of design has been prototyped and shown great potential to enable retrofitting of large amounts of grid-following controllers through purely software algorithm update. The technology ensures reliable operation of power grids with high penetration of IBRs, thereby further reducing fossil fueled energy sources and cut down carbon emission.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Analyzing the Impact of Solar Power on Multi-Hourly Thermal Generator Ramping

Solar power generation, unlike conventional forms of electricity generation, has higher variability and uncertainty in its output because solar plant output is strongly impacted by weather. As the penetration rate of solar capacity increases, grid operators are increasingly concerned about accommodating the increased variability and uncertainty that solar power provides. This paper illustrates the impacts of increasing solar power penetration on the ramping of conventional electricity generators by simulating the operation of the Independent System Operator -- New England power system. A production cost model was used to simulate the power system under five different scenarios, one without solar power and four with increasing solar power penetrations up to 18%, in terms of annual energy. The impact of solar power is analyzed on six different temporal intervals, including hourly and multi-hourly (2- to 6-hour) ramping. The results show how the integration of solar power increases the 1- to 6-hour ramping events of the net load (electric load minus solar power). The study also analyzes the impact of solar power on the distribution of multi-hourly ramping events of fossil-fueled generators and shows increasing 1- to 6-hour ramping events for all different generators. Generators with higher ramp rates such as gas and oil turbine and internal combustion engine generators increased their ramping events by 200% to 280%. For other generator types--including gas combined-cycle generators, coal steam turbine generators, and gas and oil steam turbine generators--more and higher ramping events occurred as well for higher solar power penetration levels.

14 SOLAR ENERGY↗

Using Image Processing Techniques to Identify and Quantify Spatiotemporal Carbon Cycle Extremes

Rising atmospheric carbon dioxide due to human activities through fossil fuel emissions and land use changes have increased climate extremes such as heat waves and droughts that have led to and are expected to increase the occurrence of carbon cycle extremes. Carbon cycle extremes represent large anomalies in the carbon cycle that are associated with gains or losses in carbon uptake. Carbon cycle extremes could be continuous in space and time and cross political boundaries. Here, we present a methodology to identify large spatiotemporal extremes (STEs) in the terrestrial carbon cycle using image processing tools for feature detection. We characterized the STE events based on neighborhood structures that are three-dimensional adjacency matrices for the detection of spatiotemporal manifolds of carbon cycle extremes. We found that the area affected and carbon loss during negative carbon cycle extremes were consistent with continuous neighborhood structures. In the gross primary production data we used, 100 carbon cycle STEs accounted for more than 75% of all the negative carbon cycle extremes. This paper presents a comparative analysis of the magnitude of carbon cycle STEs and attribution of those STEs to climate drivers as a function of neighborhood structures for two observational datasets and an Earth system model simulation.

Sharma, Bharat↗

X-ray Coherent Diffraction Imaging of Cellulose Fibrils in Situ

Cellulose is the most abundant renewable source of organic molecules on earth[1]. As fossil fuel reserves become depleted, the use of cellulose as a feed stock for fuels and chemicals is being aggressively explored. Cellulose is a linear polymer of glucose that packs tightly into crystalline fibrils that make up a substantial proportion of plant cell walls. Extraction of the cellulose chains from these fibrils in a chemically benign process has proven to be a substantial challenge [2]. Monitoring the deconstruction of the fibrils in response to physical and chemical treatments would expedite the development of efficient processing methods. As a step towards achieving that goal, we here describe Bragg-coherent diffraction imaging (CDI) as an approach to producing images of cellulose fibrils in situ within vascular bundles from maize.

Lal, Jyotsana↗

Case for Open-Source PEV Charge Management Data Framework

The future growth of electrified transportation could be enhanced through interaction with smart grid system architectures. This paper summarizes current literature regarding plug-in electric vehicle - renewables integration and highlights areas of need to implement such integration at a multi-utility scale. Future smart grid implementations hold the key to transferring information and control parameters between distributed and centralized decision agents. The discussion highlights the opportunity to leverage federal investments in grid renovation and electric vehicle introduction to create system-wide value from improved reliability and reduced fossil fuel consumption. An approach to scaling a previously defined 'green signal' methodology for electric vehicles will be detailed across a utility grid balancing region. The research will include a synopsis of the communications opportunities and challenges of coordinating the responses of many resources. The results are expected to show that, with some variation in the charge profiles of individual vehicles, the aggregate set can interface with grid management methods to significantly influence the ability to integrate distributed and centralized renewables to improve environmental quality.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Machine Learning-based Approach to Predict the Aggregate Flexibility of HVAC Systems

Use of renewable energy resources can play a significant role in mitigation of climate change since they reduce the dependency on fossil fuels. However, high penetration of renewable energy resources into the power grid may cause some reliability problems. Ancillary services are key to realize the potential of renewable resources without disturbing the grid reliability. In recent years, many control approaches focused on exploiting the aggregate flexible heating, ventilation, and air-conditioning (HVAC) loads of buildings. However, there are still research gaps in assessing in advance the resulting indoor temperature responses for given total power and weather profiles before implementing the controls in the buildings. Such an assessment is critical to guarantee satisfying both the grid related objective (reliability) and the building related objective (occupants' comfort). Towards addressing this research gap, this paper presents a machine-learning approach for predicting the ratings of indoor temperature responses. In this approach, a prediction model was developed using a dataset generated by a set of model-free control simulations. The developed model achieved high prediction accuracy and showed the potential of the proposed approach.

Amasyali, Kadir↗

Electrifying Education: Insights into Charging Electric School Buses in the United States

To combat climate change, the United States joined 193 Parties in committing to the Paris Agreement, which aims to limit global warming to 2 degrees C or less, and decarbonizing transportation will be a key requirement for achieving this goal. School buses (SBs) are a common form of student transport in the U.S. with nearly all SBs today powered by fossil fuels (primarily diesel). As a result, SBs have historically been a concerning source of both greenhouse gas (GHG) emissions and local air pollutants with negative health impacts for students and others living nearby. Electric SBs (ESBs) are a promising emerging technology for decarbonizing student transport, however, ESB adoption in the U.S. remains at an early stage (approximate 1.1%) with many outstanding uncertainties. This study aims to elucidate several of these by taking inventory of the total SB stock within U.S. states and studying real-world SB operating profiles to infer potential battery range requirements, daily charging opportunities, and charging infrastructure requirements for ESBs. In addition, we observe the geographic trends of early-stage ESB adoption, which can be used to better understand early adopter patterns and train vehicle technology adoption models.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗

Lithium-Ion Battery Technologies for Electric Vehicles: Progress and challenges

Electric Vehicle (EV) sales and adoption have seen a significant growth in recent years, thanks to advancements and cost reduction in lithium-ion battery technology, attractive performance of EVs, governments' incentives, and the push to reduce greenhouse gases and pollutants. In this article, we will explore the progress in lithium-ion batteries and their future potential in terms of energy density, life, safety, and extreme fast charge. Here we will also discuss material sourcing, supply chain, and end-of-life-cycle management as they have become important considerations in the ecosystem of batteries for the sustained growth and adoption of EVs. With significant government and private sector investments in research and development, processing, and manufacturing and advances in anodes (lithium and silicon), cathodes (high nickel), designs, supply chain development, and the circularity of lithium-ion batteries, lithium-based batteries are on track to make EVs mainstream, addressing climate concerns of fossil-fueled vehicles.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

To Capture the Wind

Abstract: From the birth of modern electricity-generating wind turbines in the late 1970s to now, wind energy technology has dramatically improved. Capital costs have plummeted, reliability has improved, and efficiency has increased. High-quality turbine manufacturers exist around the world, and wind plants of 300 MW and larger are being integrated into the electrical grid to exacting utility specifications. These modern wind plants are now routinely produced by multinational manufacturing companies at a cost of energy approaching, and in some cases below, that of fossil-fuel generating plants. At the end of 2006, the total U.S. wind energy capacity had grown to 11,603 MW, or enough to provide the electrical energy needs of more than 2.9 million American homes. Wind capacity in the United States and in Europe has grown at a rate of 20% to 30% per year over the past decade. Despite this rapid growth, wind currently provides less than 1% of total electricity consumption in the United States. The vision of the wind industry in the United States and in Europe is to increase wind's fraction of the electrical energy mix to more than 20% within the next two decades.

17 WIND ENERGY↗

Integrated Resource and System Plannning Based on Energy Costs and Emission Analysis for a Sustainable Future

Efficient integration of renewable energy sources (RES) - such as wind, solar, geothermal, tidal, and wave - into the electric power grids can help improve energy security and contribute toward a sustainable energy future. To date, however, electric power grids are critically dependent on conventional sources, such as fossil fuels. Given the increasing penetration of RES and dynamic loads, there is a need to thoroughly reanalyze the performance of power grids in terms of cost, efficiency, and energy security. This paper presents a comprehensive analysis in terms of energy costs and emissions estimates of dynamic power grids incorporating various power-generating sources.

distributed energy resources↗

Optimal Control of Distributed Energy Resources using Model Predictive Control

In an isolated power system (rural microgrid), Distributed Energy Resources (DERs) such as renewable energy resources (wind, solar), energy storage and demand response can be used to complement fossil fueled generators. The uncertainty and variability due to high penetration of wind makes reliable system operations and controls challenging. In this paper, an optimal control strategy is proposed to coordinate energy storage and diesel generators to maximize wind penetration while maintaining system economics and normal operation. The problem is formulated as a multi-objective optimization problem with the goals of minimizing fuel costs and changes in power output of diesel generators, minimizing costs associated with low battery life of energy storage and maintaining system frequency at the nominal operating value. Two control modes are considered for controlling the energy storage to compensate either net load variability or wind variability. Model predictive control (MPC) is used to solve the aforementioned problem and the performance is compared to an open-loop look-ahead dispatch problem. Simulation studies using high and low wind profiles, as well as, different MPC prediction horizons demonstrate the efficacy of the closed-loop MPC in compensating for uncertainties in wind and demand.

Mayhorn, Ebony T.↗

Impacts of Control, Penetration, and Distribution of Embedded Storage Network in Bulk Power System

The current shift in generation mix from fossil fuel plants towards variable and intermittent renewable energy sources is poised to create a future grid with reduced physical inertia and mismatch between generation and demand. Embedded storage, which is a concept of a coordinated network of storage units sited at the interface between the transmission and distribution system, is proposed as a mechanism to provide a buffer between generation and demand. This paper proposes an automated framework to model and integrate embedded storage in large-scale power systems with industry-grade grid-following (GFL) and grid-forming (GFM) control technologies. More importantly, the developed framework is used to explore the impacts of embedded storage control, penetration, location, and capacity in providing fast frequency response to the grid under contingency events such as generator trips and faults. The framework and study are conducted using the transient-stability simulation tool PSS/E and a realistic model of the Puerto Rico grid as a chosen test system. The simulation results show that GFL and GFM embedded storage, distributed throughout the system, with sufficient penetration and capacity, can effectively improve primary frequency response of the system under the studied contingency events.

Battery Energy Storage, embedded storage, grid-for↗

An Innovative Energy Management System for Microgrids with Multiple Grid-Forming Inverters

As increasingly more grid-forming (GFM) inverter-based resources replace traditional fossil-fueled synchronous generators as the GFM sources in microgrids, the existing microgrid energy management systems (EMS) need to be updated to control and coordinate multiple GFM inverters that consider system control objectives under different microgrid connection states. For each state, we formulate an optimization problem and apply a real-time feedback-based control algorithm; altogether, the control algorithms seamlessly connect the states into a generic microgrid EMS that controls the nodal voltages and frequencies, becomes a virtual power plant (VPP) when connected to the main grid, and coordinates power sharing responsibility among GFM sources when islanded. We showcase the EMS on a real-world simulation of a microgrid under the different states to demonstrate its operational effectiveness.

energy management systems↗

Development of Low-Cost, Crack-Tolerant Metallization Using Screen Printing

One of the ways to reduce the cost of solar electricity to 3/kWh, thus reaching parity with fossil-fuel-based generation, is to reduce the degradation rate of solar modules and extend their lifetime well beyond 30 years. The extended module lifetime in turn can positively influence the financial model and the bankability of utility-scale PV projects. Today, the highest-riskpriority solar module degradation mechanism is what is known as hot spots, often induced by cell cracks. In order to address this degradation mechanism, we make use of low-cost, multi-walled carbon nanotubes embedded in commercial screen-printable silver pastes. When the carbon nanotubes are properly functionalized and appropriately incorporated into commercial silver pastes, the resulting metal contacts on solar cells, after screen-printing and firing, show exceptional fracture toughness. These composite metal contacts possess increased ductility, electrical gap-bridging capability up to 50 um, and 'self-healing' to regain electrical continuity even after cycles of complete electrical failure under extreme strain.

14 SOLAR ENERGY↗