Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field Operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Ion source and beam guiding studies for an API neutron generator

Recently developed neutron imaging methods require high neutron yields for fast imaging times and small beam widths for good imaging resolution. For ion sources with low current density to be viable for these types of imaging methods, large extraction apertures and beam focusing must be used. We present recent work on the optimization of a Penning-type ion source for neutron generator applications. Two multi-cusp magnet configurations have been tested and are shown to increase the extracted ion current density over operation without multi-cusp magnetic fields. The use of multi-cusp magnetic confinement and gold electrode surfaces have resulted in increased ion current density, up to 2.2 mA/cm{sup 2}. Passive beam focusing using tapered dielectric capillaries has been explored due to its potential for beam compression without the cost and complexity issues associated with active focusing elements. Initial results from first experiments indicate the possibility of beam compression. Further work is required to evaluate the viability of such focusing methods for associated particle imaging (API) systems.

43 PARTICLE ACCELERATORS↗
DOE OSTI2013

Spin echo dynamics under an applied drift field in graphene nanoribbon superlattices

We investigate the evolution of spin dynamics in graphene nanoribbon superlattices (GNSLs) with armchair and zigzag edges in the presence of a drift field. We determine the exact evolution operator and show that it exhibits spin echo phenomena due to rapid oscillations of the quantum states along the ribbon. The evolution of the spin polarization is accompanied by strong beating patterns. We also provide detailed analysis of the band structure of GNSLs with armchair and zigzag edges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Optical electric fields as wavelength function within active layer of graphene/Si heterojunction solar cell – An analysis

The optical electric field characteristics of graphene/Si heterojunction thin film solar cell as the function of wavelength photons incident have modeled and calculated. There is ITO/TiO{sub 2}/C-Si/TiO{sub 2} device configuration in which p-n junction represented by C-Si and viewed as active layer for excited electrons production. The dependent of such electric field on wavelength can be understood by solving scattering matrix obtained from the interface matrix and layer matrix operation, in this report we have calculated the electric field distribution for several active layer thickness (d{sub AL}) conditions and each of them examined in the cases of x position are equal to zero, half and full of d{sub AL} while for the entire taking into account we used 250 – 840 nm wavelength range. However, this calculation is restricted by idealization assumption such as the complex refraction index is doesn’t change significantly by the thickness in hundred nanometer range, linear optical response described by scalar refraction complex index and the interface are parallel and flat compared to the wavelength of the light.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Bias-free spin-wave phase shifter for magnonic logic

A design of a magnonic phase shifter operating without an external bias magnetic field is proposed. The phase shifter uses a localized collective spin wave mode propagating along a domain wall “waveguide” in a dipolarly-coupled magnetic dot array with a chessboard antiferromagnetic (CAFM) ground state. It is demonstrated numerically that the remagnetization of a single magnetic dot adjacent to the domain wall waveguide introduces a controllable phase shift in the propagating spin wave mode without significant change to the mode amplitude. It is also demonstrated that a logic XOR gate can be realized in the same system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

A versatile rotary-stage high frequency probe station for studying magnetic films and devices

We present a rotary-stage microwave probe station suitable for magnetic films and spintronic devices. Two stages, one for field rotation from parallel to perpendicular to the sample plane (out-of-plane) and the other intended for field rotation within the sample plane (in-plane) have been designed. The sample probes and micro-positioners are rotated simultaneously with the stages, which allows the field orientation to cover θ from 0{sup ∘} to 90{sup ∘} and φ from 0{sup ∘} to 360{sup ∘}. θ and φ being the angle between the direction of current flow and field in a out-of-plane and an in-plane rotation, respectively. The operation frequency is up to 40 GHz and the magnetic field up to 1 T. The sample holder vision system and probe assembly are compactly designed for the probes to land on a wafer with diameter up to 3 cm. Using homemade multi-pin probes and commercially available high frequency probes, several applications including 4-probe DC measurements, the determination of domain wall velocity, and spin transfer torque ferromagnetic resonance are demonstrated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Core radial electric field and transport in Wendelstein 7-X plasmas

The results from the investigation of neoclassical core transport and the role of the radial electric field profile (E r ) in the first operational phase of the Wendelstein 7-X (W7-X) stellarator are presented. In stellarator plasmas, the details of the E r profile are expected to have a strong effect on both the particle and heat fluxes. Investigation of the radial electric field is important in understanding neoclassical transport and in validation of neoclassical calculations. The radial electric field is closely related to the perpendicular plasma flow (u ⊥ ) through the force balance equation. This allows the radial electric field to be inferred from measurements of the perpendicular flow velocity, which can be measured using the x-ray imaging crystal spectrometer and correlation reflectometry diagnostics. Large changes in the perpendicular rotation, on the order of Δu ⊥ ~ 5 km/s (ΔE r ~12 kV/m), have been observed within a set of experiments where the heating power was stepped down from 2 MW to 0.6 MW. These experiments are examined in detail to explore the relationship between heating power temperature, and density profiles and the radial electric field. Finally, the inferred E r profiles are compared to initial neoclassical calculations based on measured plasma profiles. The results from several neoclassical codes, sfincs, fortec-3d, and dkes, are compared both with each other and the measurements. Finally, these comparisons show good agreement, giving confidence in the applicability of the neoclassical calculations to the W7-X configuration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

A new scaling for divertor detachment

The ITER design, and future reactor designs, depend on divertor `detachment,'whether partial, pronounced or complete, to limit heat flux to plasma-facing components and to limit surface erosion due to sputtering. It would be valuable to have a measure of the difficulty of achieving detachment as a function of machine parameters, such as input power, magnetic field, major radius, etc. Frequently the parallel heat flux, estimated typically as proportional to P-sep/R or PsepB/R, is used as a proxy for this difficulty. Here we argue that impurity cooling is dependent on the upstream density, which itself must be limited by a Greenwald-like scaling. Taking this into account self-consistently, we find the impurity fraction required for detachment scales dominantly as power divided by poloidal magnetic field. The absence of any explicit scaling with machine size is concerning, as P-sep surely must increase greatly for an economic fusion system, while increases in the poloidal field strength are limited by coil technology and plasma physics. This result should be challenged by comparison with 2D divertor codes and with measurements on existing experiments. Nonetheless, it suggests that higher magnetic field, stronger shaping, double-null operation, `advanced' divertor configurations, as well as alternate means to handle heat flux such as metallic liquid and/or vapor targets merit greater attention.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Pattern formation in strongly magnetized plasmas: observations from the magnetized dusty plasma experiment (MDPX) device

The last decade has seen the development of new experimental devices to explore the physics of magnetized dusty plasmas. Because of the small charge-to-mass ratio of the charged microparticles, it is necessary to operate these experiments at high magnetic fields of several Tesla in order to observe the direct effect of the magnetic forces on the transport properties of the charged microparticles. While the study of magnetized dusty plasmas is still the ultimate goal, these experiments have also provided new opportunities to studies regimes of strongly magnetized, low temperature, laboratory plasmas that have not been extensively explored. Experiments show the formation of new types of self- and imposed-ordered structures that form in both the plasma and among the microparticles. This work summarizes recent experimental observations of plasma filamentation (in the plasma) and will discuss possible connections to 'dust gridding' phenomena that are observed in the magnetized dusty plasma experiment device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Prediction of strain, inter-layer interaction and critical current in CORC ® wires under axial strain by T-A modeling

Superconducting conductors on round core (CORC ® ) cables and wires can meet the needs of large high-field magnets, such as particle accelerators and compact nuclear fusion machines, due to their simple cabling process, high current-carrying capacity and reliable operation under high mechanical stresses. Many high-field magnets require CORC ® cables to carry a current of thousands of amperes in a background magnetic field exceeding 20 T. As a result, the large electromagnetic forces will deform the cable in the axial direction due to hoop stress and in the transverse direction by compressive stress. Therefore, it is essential to determine the irreversible deformation limit of the CORC ® cable under axial tensile load and optimize the cabling parameters to potentially extend this limit. Analytical and numerical methods are developed to assess the performance degradation of CORC ® wires under axial tensile load. The strain level, interlayer contact pressure and friction and their impact on the critical current are calculated by combining the mechanical response and the T-A method. Analyzing the results shows that the winding angle of the tape and the Poisson’s ratio of the inner core are key factors affecting the irreversible tensile strain limit of CORC ® wires. The smaller the winding angle and the higher the Poisson’s ratio of the inner core, the higher the irreversible tensile strain limit. For multi-layer CORC ® wires, the initial contact pressure caused by the cabling process must also be considered. The inter-layer interaction is coupled with the tape strain of each layer. The results of this research can serve as a basis for optimizing and designing CORC ® wires with extended irreversible strain limits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

The Pollica perspective on the (super)-conformal world

This manuscript samples a series of recent results in the quest for a systematic understanding of the space of conformal field theories, with a particular focus on theories with extended supersymmetry. The large majority of results reported here were presented during the second Pollica summer workshop which took place from June 3–21 2019 and focused on mathematical and geometric tools for superconformal field theories. Furthermore, this manuscript represents in many ways a partial summary of the workshop.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Electron Transport Properties of Al x Ga 1 – x N / Ga N Transistors Based on First-Principles Calculations and Boltzmann-Equation Monte Carlo Simulations

High-electron-mobility transistors (HEMTs) based on Al x Ga 1–x N/GaN heterostructures have great potential for applications in power electronics and radio frequency applications. Operating under large bias and electric fields, hot electrons are present in the channel where they can activate preexisting benign defects that cause scattering or carrier trapping, resulting in device degradation, such as threshold-voltage shifts and transconductance degradation. We report a comprehensive investigation of the electron transport properties of wurtzite-phase GaN and AlN and of an Al 0.25 Ga 0.75 N/GaN HEMT by solving the Boltzmann transport equation with a synchronous ensemble Monte Carlo technique and employing first-principles electronic properties, including the full energy bands, phonon dispersions, and electron-phonon scattering rates. We find that, for electron collisions with the highest-energy optical phonon mode, nonpolar scattering by optical phonons contributes comparable to polar scattering. Polar scattering with acoustic phonons, that is, piezoelectric scattering, is found to be as important as the polar scattering with optical phonons for low-energy electrons at room temperature. Here, we compare the calculated high-field transport characteristics of bulk GaN with previously reported results. We also calculate the nonpolar acoustic deformation potential, nonpolar optical deformation potential, and high-field transport characteristics of bulk AlN. We find that inclusion of piezoelectric scattering results in a low-field electron mobility of approximately 450cm 2 /(V s), which is very close to the experimental value. Simulation results are presented for an Al 0.25 Ga 0.75 N/GaN HEMT, including electric field, average carrier kinetic energy, and drift velocity in the channel. Finally, we present the carrier energy distribution function in the conducting channel, which is key to accurately determine hot-carrier-caused device degradation and identify possible routes to an improved device design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Thermal conductivity and theory of inelastic scattering of phonons by collective fluctuations

We study the intrinsic scattering of phonons by a general quantum degree of freedom, i.e., a fluctuating “field” Q, which may have completely general correlations, restricted only by unitarity and translational invariance. From the induced scattering rates, generalizing the model studied in a companion paper [Mangeolle et al., Phys. Rev. X 12, 041031 (2022)], we obtain the consequences on the thermal conductivity tensor of the phonons. We confirm that, even within our generalized model, the off-diagonal scattering rates involve a minimum of three- to four-point correlation functions of the Q fields, and we discuss the “semiclassical” versus “quantum” nature of all contributions. We obtain general and explicit forms for these correlations which isolate the contributions to the Hall conductivity, and we provide a general discussion of the implications of symmetry and equilibrium; this elaborates on, and extends, the results of Mangeolle et al. [Phys. Rev. X 12, 041031 (2022)]. We also extend the discussion and evaluation of these two- (diagonal scattering) and four-point correlation functions, and hence the thermal transport, for the illustrative example of an ordered two-dimensional antiferromagnet, where the Q field is a composite of magnon operators arising from spin-lattice coupling, and confirm numerically that the results, while satisfying all the necessary symmetry restrictions, lead to nonvanishing scattering and Hall effects. In particular, we investigate, both analytically and numerically, the dependence of such intrinsic scattering on a crucial parameter—the magnon to phonon velocity ratio v. We in particular confirm that within some range of v of order 1 the skew-scattering mechanism leads to comparable thermal Hall conductivity for thermal currents within and normal to the plane of the antiferromagnetism, and we discover that the temperature scaling of the longitudinal conductivity displays a threshold effect and a nonuniversal, continuous variation of the scaling exponent with v.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Search for flavor-changing neutral-current couplings between the top quark and the Z boson with proton-proton collisions at s = 13 TeV with the ATLAS detector

A search for flavor-changing neutral-current couplings between a top quark, an up or charm quark, and a $Z$ boson is presented, using proton-proton collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS detector at the Large Hadron Collider. The analyzed data set corresponds to an integrated luminosity of 139 fb -1 . The search targets both single-top-quark events produced as $gq$ → $tZ$ (with $q$ = $u, c$) and top-quark-pair events, with one top quark decaying through the $t$ → $Zq$ channel. The analysis considers events with three leptons (electrons or muons), a $b$-tagged jet, possible additional jets, and missing transverse momentum. The data are found to be consistent with the background-only hypothesis and 95% confidence-level limits on the $t$ → $Zq$ branching ratios, assuming only tensor operators of the Standard Model effective field theory framework contribute to the $tZq$ vertices. These are 6.2 x 10 -5 (13 x 10 -5 ) for $t$ → $Zu$ ($t$ → $Zc$) for a left-handed $tZq$ coupling, and 6.6 x 10 -5 (12 x 10 -5 ) in the case of a right-handed coupling. These results are interpreted as 95% CL upper limits on the strength of the corresponding couplings, yielding limits for |${C}^{(13)*}_{uW}$| and |${C}^{(13)*}_{uB}$| (|${C}^{(31)}_{uW}$| and |${C}^{(31)}_{uB}$|) of 0.15 (0.16), and limits for |${C}^{(23)*}_{uW}$| and |${C}^{(23)*}_{uB}$| (|${C}^{(32)}_{uW}$| and |${C}^{(32)}_{uB}$|) of 0.22 (0.21), assuming a new-physics energy scale Λ NP of 1 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Impact of high invariant-mass Drell-Yan forward-backward asymmetry measurements on SMEFT fits

We study the impact of LHC forward-backward asymmetry (AFB) measurements at high invariant mass in the Drell-Yan process on probes of semileptonic four-fermion operators in the Standard Model effective field theory (SMEFT). In particular, we study whether AFB measurements can resolve degeneracies in the Wilson coefficient parameter space that appear when considering invariant-mass and rapidity measurements alone. We perform detailed fits of the available high-energy and high-luminosity ATLAS and CMS data for both invariant-mass distributions and AFB. While each type of measurement separately exhibits degeneracies, combining them removes these blind spots in some cases. In other situations, it does not, highlighting the importance of incorporating future datasets from other experiments to fully explore this sector of the SMEFT. We investigate the impact of contributions quadratic in the Wilson coefficients on the description of Drell-Yan data and discuss when such terms are important in joint fits of the AFB and invariant-mass data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Renormalization-group running of dimension-8 four-fermion operators in the SMEFT

We compute the renormalization-group equations governing the evolution of dimension-8 four-fermion operators in the Standard Model effective field theory (SMEFT). We describe the calculation and present analytic results for both the full flavor structure of the SMEFT and with the assumption of minimal flavor violation. We present numerical results for the renormalization-group evolution of the coefficients, and study their impact on fits of the Large Hadron Collider (LHC) Drell-Yan data. The effects of running on the dimension-8 coefficients can reach 50% or more when evolving from 10 TeV scale down to few-GeV energies relevant for the analysis of fixed-target data. However, the impact of the dimension-8 running on the analysis of Drell-Yan data from the LHC is minimal.

effective field theory↗
DOE OSTI2019

Capacity Valuation of Demand Response in the Presence of Variable Generation through Monte Carlo Analysis

While smart demand-side management technologies have significant potential to support the integration of variable renewable generation sources in the electricity system, rigorously quantifying the contribution of demand response to meeting peak demand remains a challenge due to the nontrivial intertemporal considerations involved in demand response operations. This paper contributes to the field of capacity value by studying the effect of customer participation in DR programs, investigating the contribution that shiftable loads can provide for capacity value in a smart, standalone system. This paper uses a Monte Carlo simulation to investigate the effect of DR on the loss of load probability in a sequential simulation framework. Also presented here is a load-shifting model for customer loads where time of use is based on need, priority, and the availability of generation. Results of this work present a quantitative value for the equivalent firm capacity of demand response programs for a specific test case that depends on the participation rate among consumers.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Broadband Ultra-Sensitive Adiabatic Magnetometer

We introduce a new ultra-sensitive adiabatic magnetometer that has a broad bandwidth and can operate in the presence of magnetic fields and gradients. It follows conceptually typical implementations of atomic magnetometers based on alkali-metal vapor cells and lasers for optical pumping and optical Faraday effect detection, while its unique feature is a measurement of an oscillating magnetic field along the probe beam direction at frequencies lower than the resonant frequency, proportional to a static magnetic field along the pump beam direction. The bandwidth of the adiabatic magnetometer scales as the strength of the field along the pump beam. From our theoretical studies it is expected that the adiabatic magnetometer can reach 1 fT sensitivity with a bandwidth of 10 kHz, which any type of atomic magnetometers cannot achieve. Among anticipated various applications of this adiabatic magnetometer are biomagnetic sensing, nuclear magnetic resonance detection, and alkali-metal density measurements. In conclusion, we experimentally conducted alkali-metal density measurements, as an example of applications.

adiabatic magnetometer↗
DOE OSTI2021

Remote Monitoring and Diagnostics of Pitch-Bearing Defects in an MW-Scale Wind Turbine Using Pitch Symmetrical-Component Analysis

Recently, multiple wind turbine failure databases have reviewed that the pitch system is one of the subassemblies with the highest failure rates and largest contributors to the overall downtime. Therefore, there has been an increasing interest to provide remote health monitoring for wind turbine pitch system. While most of the research articles are discussing pitch actuation system (hydraulic or electric actuator) faults only, there is very limited research on pitch-bearing-defect detection. This article provides a remote and hardware-free solution to monitor multiaxis pitch-bearing health condition called pitch symmetrical-component analysis. It leverages readily available low-resolution (100 Hz) electrical measurements, mechanical measurements, and control signals from the existing pitch control platform, and innovatively applies symmetrical-component analysis in multiphase ac system to multiaxis pitch control system and introduces multiaxis pitch-bearing degradation trending curves. This hardware-free solution can be directly applied to the existing wind turbines and successfully give the wind farm operator an early warning before multiaxis pitch bearing fails. It has been proved to be accurate, low cost, and has minimum impacts on turbine normal operation, and has been validated by field data from several North America MW-scale wind farms. This approach turns out to be the first hardware-free (no additional hardware needed) method to remotely monitor and diagnose multiaxis wind turbine pitch-bearing condition.

17 WIND ENERGY↗