Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel cladding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

An improved model for pellet-clad interaction for FRAPCON

The widely used fuel performance code FRAPCON-3 currently makes use of the rigid pellet model for Pellet-Cladding Mechanical Interactions (PCMI). Due to the potential of PCMI to limit fuel lifetime at higher burnups, the FRAPCON Radial-Axial Soft Pellet (FRASP) model is being developed for implementation into an improved version of FRAPCON, the FRAPCON-EP for Enhanced Performance. FRASP solves for the radial, hoop, and axial components of stress and strain for the fuel and cladding, including both elastic and inelastic behavior, in a quasi-static approach. Under PCMI conditions, FRASP couples the axial and radial states of the fuel and cladding via interfacial pressure and friction. Unlike the hard pellet model employed in FRACAS-I, the mechanical model used by FRAPCON-3, FRASP does allow for the stress-induced deformation of the fuel pellet. It also accounts for the radial distribution of stress and strain components through the cladding thickness. FRASP has been implemented into FRAPCON-3 and preliminarily validated against FRAPCON-3.3 for one PWR case and one BWR case with good results. The predicted fuel and cladding strains only slightly different with the new model, generally reducing the dimensional changes of the fuel pellets. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

STEP Report on Advanced ODS FeCrAl Alloys for Fission Applications

Oak Ridge National Laboratory is developing advanced low-Cr oxide dispersion strengthened (ODS) FeCrAl alloys for accident tolerant fuel (ATF) cladding. This report presents the characterization of two new ODS FeCrAl tubes by using powder commercially mechanically alloyed by Zoz GmbH, which underwent high-precision tube rolling with two different annealing schedules. This work shows that the ODS FeCrAl tube without recrystallization exhibits consistent mechanical behavior in comparison with a previously produced tube. The second tube, which underwent a full recrystallization step before the final tube rolling step, showed some circumferential cracking and exhibited limited ductility in the axial tube tensile tests. Based on current and prior work on the ODS FeCrAl alloy system, this report compares the current state of the scientific literature on the alloy class with that of wrought FeCrAl without oxide additions. Then, this report makes recommendations for future research directions that should be undertaken to increase the technology readiness level for ODS FeCrAl as a viable ATF candidate material. This report has been submitted as fulfillment of milestone M3FT-20OR020202064 titled, “STEP Report on Advanced ODS FeCrAl Alloys for Fission Applications” for the US Department of Energy Office of Nuclear Energy’s Advanced Fuel Campaign of the Fuel Cycle R&D program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Length scale effects of micro- and meso-scale tensile tests of unirradiated and irradiated Zircaloy-4 cladding

Zircaloy-4 is an essential material for cladding structures within fission-based reactors. To explore the changes in properties measured on differing length scales, FIB-machined micro-scale tensile tests were performed on both irradiated and control groups of Zircaloy-4. This was correlated with tensile testing on femtosecond laser-machined meso-scale specimens. Pronounced size effects were found when varying specimen geometry. Increases in tensile geometry size were associated with a reduction in measured yield stress for both irradiated and unirradiated samples. Here, meso-scale testing found strength and strain values similar to that of bulk-scale testing.

36 MATERIALS SCIENCE↗

Interface Problem Formulation Improvements with Application to Nuclear Fuel Performance Analysis

The U.S. Department of Energy’s Nuclear Energy Advanced Modeling and Simulation Program aims to develop predictive capabilities by applying computational methods to the analysis and design of advanced reactor and fuel cycle systems. This program has been providing engineering scale support for the development of BISON, a high-fidelity and high-resolution fuel performance tool. This report documents new developments and robustness improvements in mechanical and thermal (gap heat transfer) contact formulations. The improvements range from the migration of industrial level (“assessment”) nuclear fuel model setups to the usage of mortar formulations, the addition of frictional contact to one-dimensional layered representations of fuel and cladding components, and the addition of the Petrov-Galerkin approach to dual mortar, which improves performance on curved, relatively coarse meshes. In addition, the Lagrange-multiplier enforcement of mechanical mortar contact constraints has been extended to two additional types of enforcement: penalty and augmented Lagrange-Uzawa. We show that the latter approach yields the same interface results as dual mortar in the Multiphysics Object-Oriented Simulation Environment, with the advantage of not worsening the condition number of the system matrix—thereby enabling the use of some general implementations of iterative preconditioners, at the expense of additional system evaluations (i.e., augmentations).

42 ENGINEERING↗

Report on fundamental modeling of irradiation-induced swelling and creep in FeCrAl alloys

In order to improve the accident tolerance of light water reactor (LWR) fuel, alternative cladding materials have been proposed to replace zirconium (Zr)-based alloys. Of these materials, there is a particular focus on iron-chromium-aluminum (FeCrAl) alloys due to much slower oxidation kinetics in high-temperature steam than Zr-alloys. This should decrease the energy release due to oxidation and allow the cladding to remain integral longer in the presence of high temperature steam, making accident mitigation more likely. As a continuation of the development for these alloys, the material response must be demonstrated to provide suitable radiation stability, in order to ensure that there will not be significant dimensional changes (e.g., swelling), as well as quantifying the radiation hardening and radiation creep behavior. In this report, we describe the use of cluster dynamics modeling to evaluate the defect physics and damage accumulation behavior of FeCrAl alloys subjected to neutron irradiation, with a particular focus on irradiation-induced swelling and defect fluxes to dislocations that are required to model irradiation creep behavior.

36 MATERIALS SCIENCE↗

BISON Contact Improvements CASL FY14 Report

The BISON code is the foundation for multiple fuel performance modeling efforts, and is currently under heavy development. For a variety of fuel forms, the effects of heat conduction across a gap and mechanical contact between components of a fuel system are very significant. It is thus critical that BISON have robust capabilities for enforcement of thermal and mechanical contact. BISON’s solver robustness has generally been quite good before mechanical contact between the fuel and cladding occurs, but there have been significant challenges obtaining converged solutions once that contact occurs and the solver begins to enforce mechanical contact constraints. During the current year, significant development effort has been focused on the enforcement of mechanical contact to provide improved solution robustness. In addition to this work to improve mechanical contact robustness, an investigation into questionable results attributable to thermal contact has been performed. This investigation found that the order of integration typically used on the surfaces involved in thermal contact was not sufficiently high. To address this problem, a new option was provided to permit the use of a different integration order for surfaces, and new usage recommendations were provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Improving Ductility of Hydride Embrittled Zirconium (Final Report)

One of the main limiting factors on the lifetimes of nuclear fuel rod claddings is the formation of hydrides and associated detrimental effects on mechanical properties. In this study, we examined the behavior of hydrides in zirconium and zircaloy-4 after tensile stress is applied to determine whether the more ductile γ-ZrH phase was stabilized by the mechanical stress. We did not find a significant increase in the ratio of γ-ZrH phase to δ-ZrH1.5 phases after tensile stress is applied in previously hydrided metals. Previous reports indicate that this stabilization does occur when zircaloy is stressed and hydrided simultaneously, indicating that the formation of the γ-ZrH phase may reverse upon relaxation or may require the stress in-situ during the hydriding process to form in significant quantities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phase-field modeling of void evolution and swelling in materials under irradiation

Void swelling is an important phenomenon observed in both nuclear fuels and cladding materials in operating nuclear reactors. In this work we developed a phase-field model to simulate the void nucleation, growth, and the change of void volume fraction. Important material processes including the generation of defects such as vacancies and self-interstitials, their diffusion and annihilation, and void nucleation and evolution have been taken into account in our phase-field model. The thermodynamic and kinetic properties such as chemical free energy, interfacial energy, vacancy mobility, and annihilation rate of vacancies and interstitials are generally expressed as functions of the temperature. The developed model enables one to parametrically study critical void nucleus size, void growth kinetics, and void volume fraction evolutions. Our simulations demonstrated that the volume swelling displays a quasi-bell shape distribution with temperature that was often observed in experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of an Accident Tolerant Fuel Leak in the Advanced Test Reactor

Accident Tolerant Fuels (ATF), which are nuclear fuel sources designed to withstand operational irregularities and incidents, have been a topic of interest in the nuclear industry for several decades. Interest in ATF technology surged following the 2011 accident at Fukushima Daiichi in Japan. At the Advanced Test Reactor (ATR), one of Idaho National Laboratory’s (INL) four operating nuclear reactors, the ATF program is a collaborative effort between the national laboratory and various stakeholders within the nuclear industry. This program focuses on the research and development of novel fuel compositions, cladding, and component materials with enhanced accident-resistant properties. During one of ATR’s 60-day operating cycles in 2024, the reactor experienced five unplanned shutdowns. Following the fifth shutdown, radiation monitors detected an increase in radiation levels coming from the loop piping. Subsequent water samples confirmed the cause was a leak of fission products from the ATF experiment, designated as ATF-2C. The source of the leak was identified as the instrumented section of the test train. The primary discussions in this paper are 1) the design of the ATF test train, 2) the operating parameters leading up to and following the detection of the leak, and 3) the quantification and characterization of the released fission products.

Accident Tolerant Fuels↗

Evaluation of an Accident Tolerant Fuel Leak in the Advanced Test Reactor

Accident Tolerant Fuels (ATF), which are nuclear fuel sources designed to withstand operational irregularities and incidents, have been a topic of interest in the nuclear industry for several decades. Interest in ATF technology surged following the 2011 accident at Fukushima Daiichi in Japan. At the Advanced Test Reactor (ATR), one of Idaho National Laboratory’s (INL) four operating nuclear reactors, the ATF program is a collaborative effort between the national laboratory and various stakeholders within the nuclear industry. This program focuses on the research and development of novel fuel compositions, cladding, and component materials with enhanced accident-resistant properties. During one of ATR’s 60-day operating cycles in 2024, the reactor experienced five unplanned shutdowns. Following the fifth shutdown, radiation monitors detected an increase in radiation levels coming from the loop piping. Subsequent water samples confirmed the cause was a leak of fission products from the ATF experiment, designated as ATF-2C. The source of the leak was identified as the instrumented section of the test train. The primary discussions in this presentation are 1) the design of the ATF test train, 2) the operating parameters leading up to and following the detection of the leak, and 3) the quantification and characterization of the released fission products.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Probabilistic Failure Criterion of SiC/SiC Composites Under Multiaxial Loading

Owing to its excellent mechanical properties and stability under high temperature and neutron irradiation conditions, SiC/SiC composites have emerged as a promising material for light water reactors (LWRs) in the development of accident-tolerant fuel (ATF) systems. Structural integrity and retention of hermeticity are two crucial requirements for SiC/SiC claddings during normal operations, and both of them are closely related to the proportional limit stress (PLS) of the material. Understanding the behavior of SiC/SiC composites under multiaxial stress states and developing a probabilistic approach for evaluating the structural vulnerability are of paramount importance for reliability-based analysis and design of SiC/SiC composite claddings. So far, there has been very limited effort towards experimental and analytical investigations of probabilistic failure of SiC/SiC claddings. This critical knowledge gap motivates this research. A probabilistic failure criterion for SiC/SiC composites under multi-axial loading is developed, and this criterion is incorporated into reliability analysis of the structural integrity of SiC/SiC fuel cladding. The research consists of two parts: 1) experimental investigation of multiaxial failure behavior of SiC/SiC composites, and 2) theoretical modeling of time-dependent probabilistic failure of SiC/SiC cladding. In the experimental investigation, the PLS is determined through the examination of stress-strain response, the acoustic emission measurement, as well as the X-ray computed tomography. The theoretical framework is derived by combin- ing the finite weakest-link statistical model and the subcritical damage growth model. This theoretical model captures the time-dependent failure mechanism of the material, which has a major consequence for predicting the lifetime distribution of the cladding. Meanwhile, the model also predicts that the failure statistics of the cladding depends strongly on the cladding length. The results of the multiaxial experiments reveal the level of statistical variation of the PLS of SiC/SiC materials under different stress states. The theoretical model provides a robust analytical tool for extrapolation of small-scale laboratory test results to the behavior of full-scale claddings. These findings establish a scientific foundation for the development of reliability-based design of SiC/SiC fuel claddings, which will play an essential role in improving the structural safety and integrity of LWRs.

42 ENGINEERING↗

Bison Robustness and Performance Improvements

In last year’s Bison robustness report, the authors demonstrated that improving the Jacobian matrix can drastically increase solution convergence rates. The development of an automatic differentiation (AD) capability in the MOOSE framework has created the possibility of having exact Jacobian matrices for all of our material models. A large focus in this year’s report is the application of AD to MOOSE physics modules, such as the tensor mechanics module, and the application to Bison fuel and cladding material models. A second main focus in this year’s report is the investigation of a set of algorithmic solver changes to improve the robustness and performance of Bison LWR simulations. Beyond providing increased solver robustness, the ability to solve strongly coupled multiphysics problems, and solving large deformation problems with ease, these automatically generated perfect Jacobians also drastically reduce development time for new models. In models converted to AD, Jacobian computation made up the majority of the code base. With this code removed, both readability and maintainability of the MOOSE/Bison code base are improved. The work documented here significantly improved the robustness of the Bison LWR assessment case suite. Through algorithmic changes in solver infrastructure, such as the application of predictors and improvements in timestepping, tangible improvements in performance were observed. These improvements are documented using a new standard set of metrics that are collected in all assessment cases, and a suite of statistical analysis tools developed for this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Selective Trapping of Volatile Fission Products with an Off-Gas Treatment System

A head-end processing step, termed DEOX for its emphasis on decladding via oxidation, is being developed for the treatment of spent oxide fuel by pyroprocessing techniques. The head-end step employs high temperatures to oxidize UO2 to U3O8 resulting in the separation of fuel from cladding and the removal of volatile fission products. Development of the head-end step is being performed in collaboration with the Korean Atomic Energy Research Institute (KAERI) through an International Nuclear Energy Research Initiative. Following the initial experimentation for the removal of volatile fission products, an off-gas treatment system was designed in conjunction with KAERI to collect specific fission gases. The primary volatile species targeted for trapping were iodine, technetium, and cesium. Each species is intended to be collected in distinct zones of the off-gas system and within those zones, on individual filters. Separation of the volatile off-gases is achieved thermally as well as chemically given the composition of the filter media. A description of the filter media and a basis for its selection will be given along with the collection mechanisms and design considerations. In addition, results from testing with the off-gas treatment system will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructural evolution of a silicon carbide-carbon coated nanostructured ferritic alloy composite during in-situ Kr ion irradiation at 300°C 450°C

This work focuses on irradiation behaviors of a novel silicon carbide and carbon coated nanostructured ferritic alloy (SiC-C@NFA) composite for potential applications as a cladding and structural material for next generation nuclear reactors. The SiC-C@NFA samples were irradiated with 1 MeV Kr ions up to 10 dpa at 300 and 450 °C. Microstructures and defect evolution were studied in-situ at the IVEM-Tandem facility at Argonne National Laboratory. The effects of ion irradiation on various phases such as α-ferrite matrix, (Fe,Cr) 7 C 3 , and (Ti,W)C precipitates were evaluated. The α-ferrite matrix showed a continuous increase in dislocation density along with spatial ordering of dislocation loops (or loop strings) at >5 dpa. The size of the dislocation loops at 450 °C was larger than that at 300 °C. The nucleation and growth of new (Ti,W)C precipitates in α-ferrite grains were enhanced with the ion dose at 450 °C. This study provides new insight into the irradiation resistance of the SiC-C@NFA system.

(FeCr)(7)C-3↗

NEAMS-ATF M3 Milestone Report: Literature Review of Modeling of Radiation-Induced Swelling in Fe-Cr-Al Steels

Fe-Cr-Al steels are proposed as accident-tolerant-fuel (ATF) cladding materials in light water reactors due to their excellent oxidation resistance at high temperatures. Currently, the understanding of their performance in reactor environment is still limited. In this review, firstly we reviewed the experimental studies of Fe-Cr-Al based alloys with particular focus on the radiation effects in these alloys. Although limited data are available in literature, several previous and recent experimental studies have shown that Fe-Cr-Al based alloys have very good void swelling resistance at low and moderate irradiation doses but the growth of dislocation loops is very active. Overall, the behavior of radiation damage evolution is similar to that in Fe-Cr ferritic/martensitic alloys. Secondly, we reviewed the rate theory-based modeling methods for modeling the coevolution of voids and dislocation loops in materials under irradiation such as Frenkel pair three-dimensional diffusion model (FP3DM) and cluster dynamics. Finally, we summarized and discussed our review and proposed our future plans for modeling radiation damage in Fe-Cr-Al based alloys.

36 MATERIALS SCIENCE↗

Materials Irradiation Facility (MIF) at the High Flux Isotope Reactor (HFIR)

The Material Irradiation Facility (MIF) at the Oak Ridge National Laboratory (ORNIL) High Flux Isotope Reactor (HIFR) controls and monitors instrumented irradiation experiments for materials and fuel research. In 2013 ORNIL founded a Laboratory Directed Research and Development project to reinvigorate the use of instrumented experiments by redesigning MIF to enhance its capabilities. MIF improvements include an updated and more sophisticated experiment monitoring system, a modular design allowing easier addition of simultaneous experiments, and features that allow rapid incorporation of additional instrumentation Interest in materials and fuel irradiation has increased significantly over the last decade. Much of this interest is related to investigating the performance of advanced materials for fusion environments, designing and developing improved fuel and cladding materials, and examining material characteristics and behavior under irradiation conditions. At ORNL, the irradiation engineering team has more than 60 years of experience designing and fabricating various types of irradiation experiments. Rabbit capsule experiments are small scale and relatively inexpensive. These capsules are typically designed to be irradiated in the flux-trap region of the core. Full-length target capsules are larger scale and could be either instrumented or non-instrumented. These more complicated capsules can be irradiated in any of the experiment facilities at HFIR. Instrumented experiment irradiation provides significant advantages for researchers. The unique advantage is that the researcher can monitor and acquire in situ data and change capsule operating conditions in real time during the irradiation. This capability enables tight control of desired experimental conditions so that they match the design specifications throughout the irradiation. Also, the experiment conditions (e.g., temperature and pressure) can be altered during the test, enabling significant flexibility and the ability to collect considerably more data from a single experimental capsule. This capability allows measurement of a variety of material properties (conductivity, fission product composition, etc.) that otherwise would only be available upon post-irradiation examination, where non-equilibrium conditions brought on by irradiation do not exist. The data generated by these experiments contribute significantly to the understanding of material behavior under irradiation. MIF is an experimental platform that can host fully instrumented and monitored experiments in a high neutron flux environment. Its primary functions are to provide clean inert gas (helium, neon, argon) to experiments at controlled pressures and flows, monitor irradiation conditions (typically temperatures and pressures) during irradiation, and monitor effluent gases from experiments. This facility allows monitoring of chemical processes during a fueled irradiation, where this becomes important for detecting fuel failures. This paper reports the efforts towards reestablishing the value of HFIR for instrumented irradiation experiments and the improvements to MIF that ultimately reduce the costs of instrumented irradiation. This project advances ORNL materials capabilities to new levels by providing a state-of-the art, robust and flexible facility that can be expanded as customer requirements change, while supporting the goals of the fusion, advanced fuels, and structural materials programs. (authors)

42 ENGINEERING↗

SATS Enhanced Capabilities and Demonstration of Improved Ramp Rates for In-Cell Testing

This report presents the development of the second-generation Severe Accident Test Station, referred to as SATS 2.0. SATS 2.0 represents a major advancement in addressing critical research needs for the United States nuclear industry, particularly in relation to fuel fragmentation, relocation, and dispersal (FFRD) concerns associated with the nuclear industry’s goal to extend fuel burnup beyond a peak rod average of 62 GWd/tU. The central objective of SATS 2.0 was the deployment a new furnace capable of achieving heating rates up to 100°C/s. This achievement addresses critical capability gaps, enabling assessment of prioritized research objectives established by the Electric Power Research Institute’s (EPRI) Collaborative Research on Advanced Fuel Technologies (CRAFT) working group. These research objectives are directly related to high-burnup loss-of-coolant accident (LOCA) conditions and the effects of prolonged exposure to elevated temperatures, both of which are crucial to enhancing nuclear safety and efficiency. The SATS 2.0 system builds upon prior experience with the original SATS system, which focused on evaluating accident-tolerant fuel (ATF) cladding concepts during accident conditions. However, the new system not only expands upon prior core capabilities by achieving higher heating rates with a better furnace but also plans to incorporate novel auxiliary systems to create a versatile platform for addressing current research needs. For example, a system was developed for the quantification and characterization of fission gas released during high-temperature transients. Additionally, in situ measurement capabilities were developed, such as digital image correlation which enabled the real-time capture of strain related to balloon and burst events and fiber-optic sensors that allowed for high-fidelity characterization of temperature gradients. Demonstration tests of the new 12-lamp furnace achieved heating rates up to 120°C/s. Notably, SATS 2.0 demonstrated its capacity to simulate LOCA burst tests at different pressures, yielding burst data that align with historical empirical models. Moreover, the system exhibited its capability to simulate complex conditions observed in anticipated operational occurrences, while effectively mitigating temperature overshoots. These accomplishments mark significant progress toward overcoming FFRD challenges and advancing the United States nuclear industry's safety basis and technical capabilities for extended burnup.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗