Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kinetic Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Spectroscopic and Microscopic Defect and Carrier-Lifetime Analysis in Cadmium Telluride

Using experiments and theory, we analyze 'carrier-lifetime-killer' semiconductor bulk defects in CdTe. We can estimate the concentration of tellurium antisite (Te Cd ) recombination centers in undoped CdTe from the kinetic modeling of injection-dependent photoluminescence (PL) lifetimes. For the Cd-rich stoichiometry, the concentration of lifetime-limiting [Te Cd ] is =10 13 cm -3 . For the Te-rich stoichiometry, we find a smaller hole-capture rate constant than predicted by theory, which could be because of Te Cd association with the Te interstitials. We also compare PL emission spectra, carrier lifetimes, and radiative efficiencies for Cu, P, and As doping and analyze the microscopic distribution of carrier lifetimes in As-doped single-crystal CdTe. In all the cases examined here, point defects are the dominant bulk recombination centers. Carrier lifetimes are the longest in undoped CdTe, but radiative efficiencies are the highest with group-V doping.

14 SOLAR ENERGY↗

Kinetic damping of resistive wall modes in ITER

Full drift kinetic modelling including finite orbit width effects has been used to assess the passive stabilisation of the resistive wall mode (RWM) that can be expected in the ITER advanced scenario. At realistic plasma rotation frequency, the thermal ions have a stabilising effect on the RWM, but the stability limit remains below the target plasma pressure to achieve Q = 5. However, the inclusion of damping arising from the fusion-born alpha particles, the NBI ions, and ICRH fast ions extends the RWM stability limit above the target {beta} for the advanced scenario. The fast ion damping arises primarily from finite orbit width effects and is not due to resonance between the particle frequencies and the instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combining Experiment and Theory To Unravel the Mechanism of Two-Electron Oxygen Reduction at a Selective and Active Co-catalyst

In this work, we present a combination of comprehensive experimental and theoretical evidence to unravel the mechanism of two-electron oxygen reduction reaction (ORR) on a catalyst composed of mildly reduced graphene oxide supported on P50 carbon paper (mrGO/P50). This catalyst is unique in that it shows >99% selectivity toward H 2 O 2 , the highest mass activity to date, and essentially zero overpotential in base. Furthermore, the mrGO catalytically active site is unambiguously identified and presents a unique opportunity to investigate mechanisms of carbon-based catalysis in atomistic detail. A wide range of experiments at varying pH are reported: ORR onset potential, Tafel slopes, H/D kinetic isotope effects, and O 2 reaction order. With DFT reaction energies and known thermodynamic parameters, we calculate the potential and pH-dependent free energies of all possible intermediates in this ORR and propose simple kinetic models that give semiquantitative agreement with all experiments. Our results show that mrGO is semiconducting and cannot support the conventional mechanism of coherently coupled proton–electron transfers. The conducting P50 provides electrons for initiating the ORR via outer sphere electron transfer to O 2 (aq), while the semiconducting mrGO provides the active catalytic sites for adsorption of O 2 – (aq) or HO 2 (aq), depending upon electrolyte pH. Due to this unique synergistic effect, we describe the mrGO/P50 as a co-catalyst. Lastly, this concept implies departure from the traditional picture of predicting catalytic activity trends based on a single descriptor, and the co-catalyst design strategy may generally enable other semiconductors to function as electrocatalysts as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetics of Reduction of Low-Grade Nickel Laterite Ore Using Carbon Monoxide

Reduction of a low-grade nickel laterite ore with carbon monoxide to produce Fe-Ni alloy was investigated using a thermo-gravimetric analysis (TGA) method. Non-isothermal reduction tests with a fixed heating rate of 10 °C/min from room temperature to 1200 °C were carried out to determine the different reduction stages and reaction products in each state. Combining measured mass losses with theoretically calculated values together with X-ray diffraction analysis, the products of different reduction stages were identified and a reaction path was established. Isothermal reduction tests with temperatures ranging from 500 °C to 1100 °C were performed to evaluate the temperature dependence of the reduction kinetics. Various kinetic models were fitted to the experimental data to further determine the rate-controlling step in the isothermal tests. Then, two groups of TG experiments were carried out to study the effect of CO flow rate and sample mass on the rate of reaction. The results indicated that the reduction rate increases with the increase of the reduction temperature from 500 °C to 1100 °C. More alloy products are formed and the apparent activation energies increase from 8.6 to 14.7 kJ/mol with the increase of the reduction temperature from 700 °C to 1100 °C. Accordingly, it was proposed that diffusion of CO in the gas bulk and through the pores of the laterite ore sample bed are the rate limiting steps.

36 MATERIALS SCIENCE↗

Prediction of Radiation-Induced Light Absorption in Optical Fibers with an Undoped Silica Core for Space Applications

Radiation-induced absorption (RIA) of light in five isotropic optic fibers (OFs) with a core of undoped silica glass (SiO{sub 2}) and a fluorosilicate cladding and one birefringent OF of the “PANDA” type of the same chemical composition was measured at a wavelength λ = 1.55 μm under γ-irradiation to a dose of 1 kGy (∼ 1 Gy/s), 15–45 min after completion of irradiation, and in a few months at temperatures +25 and –60°C. An extrapolation of the RIA after irradiation in the framework of the kinetic model of the nth order, which gave a forecast of the RIA for isotropic OFs of ∼1.1 and ∼ 0.3 ± 0.1 dB/km at –60 and +25°C, respectively, was made to assess the RIA at the end of a 15-year mission in space. It has been concluded that it is possible to use at least 4–5 km of OF in space under conditions of temperature variation within ±60°C at a maximum dose of 1 kGy and a mission duration of 15 years. It has also been established that the RIA will not have been higher in the birefringent OF than in the isotropic ones by the end of such a mission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient and reversible electron bifurcation with either normal or inverted potentials at the bifurcating cofactor

A longstanding mystery surrounding electron bifurcation is the significance of inverted (or “crossed”) reduction potentials of the two-electron bifurcating cofactor. Using a many-electron open-system kinetic model, we show that reversible and efficient electron bifurcation is possible without inverted reduction potentials at the bifurcating site if the absolute value of the difference between first and second reduction potentials of the bifurcating species is sufficiently large (on the scale of the redox-potential span of the high- and low-potential branches). Surprisingly, the case with strong, normally ordered potentials at the bifurcating cofactor can produce electron bifurcation that is just as effective as the case with strongly inverted potentials. Lastly, this finding amplifies the puzzle surrounding the recruitment of inverted potentials in the few well-characterized bifurcating systems of nature and suggests that electron bifurcating cofactors without strongly inverted potentials may yet be discovered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intrinsic activation energies for ring contraction of allylic cations in zeolites

Cyclic carbocations are important intermediates in zeolite-catalyzed chemistries such as methanol-to-hydrocarbons conversion, naphthenes ring opening, or coke formation. While information about their thermodynamic stability exists, little is known about the kinetics of formation and transformation of cyclic carbocations in zeolites. To fill this knowledge gap, ring contraction of the 1,3,5,5-tetramethylcyclohexenyl cation (C 10 H 17 + ), a representative of 6-membered ring allylic cations, was investigated by in situ UV–vis and IR spectroscopy. Protonic forms of zeolites served as catalysts, at temperatures from 80 °C to 135 °C. Significant oligomerization and hydride transfer in BEA and FAU hampered kinetics analysis, whereas ring contraction dominated in the channels of MOR. The reactant cation, characterized by an electronic absorption at 314 nm and an allylic stretch at 1549 cm −1 , contracted to both a 1,3-alkyl-substituted cyclopentenyl cation (287 nm and 1506 cm −1 ) and a 1,2,3-alkyl-substituted cyclopentenyl cation (297 nm and 1489 cm −1 ). Collection of time-resolved IR spectra and fitting of the intensities with various kinetic models revealed a third transformation, which is expected from thermodynamics: the 1,3-alkyl-substituted cyclopentenyl cation isomerizes to the 1,2,3-alkyl-substituted cyclopentenyl cation. Series of IR spectra recorded at different temperatures delivered intrinsic activation enthalpies (entropies) in MOR of 67 ± 2 kJ mol −1 (−130 ± 6 J mol −1 K −1 ) and 90 ± 3 kJ mol −1 (−70 ± 8 J mol −1 K −1 ) for the contraction to 1,3- and 1,2,3-substituted species, and of 88 ± 5 kJ mol −1 (−84 ± 12 J mol −1 K −1 ) for the isomerization. The findings characterize one path – via contraction of larger rings – to different cyclopentenyl species in zeolites; and the associated, moderate activation energies suggest such transformations contribute to many complex hydrocarbon reaction networks.

Acid catalysis↗

Kinetics of the processes, plasma parameters, and output characteristics of a UV emitter operating on XeI molecules and iodine molecules and atoms

A kinetic model of the processes occurring in the plasma of a high-power low-pressure gas-discharge lamp is presented, and the output characteristics of the lamp are described. The lamp is excited by a longitudinal glow discharge and emits the I{sub 2}(D Prime -A Prime ) 342-nm and XeI(B-X) 253-nm bands and the 206.2-nm spectral line of atomic iodine. When the emitter operates in a sealed-off mode on the p(He): p(Xe): p(I{sub 2}) = 400: 120: (100-200) Pa mixture, the fractions of the UV radiation power of iodine atoms, exciplex molecules of xenon iodide, and iodine molecules comprise 55, 10, and 35%, respectively. At the optimal partial pressure, the maximum total radiation power of the lamp reaches 37 W, the energy efficiency being about 15%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetics of Levoglucosenone Isomerization

In this paper, we studied the acid-catalyzed isomerization of levoglucosenone (LGO) to 5-hydroxymethylfurfural (HMF) and developed a reaction kinetics model that describes the experimental data across a range of conditions (100–150 °C, 50–100 mm H 2 SO 4 , 50–150 mm LGO). LGO and its hydrated derivative exist in equilibrium under these reaction conditions. Thermal and catalytic degradation of HMF are the major sources of carbon loss. Within the range of conditions studied, higher temperatures and shorter reaction times favor the production of HMF. The yields of HMF and levulinic acid decrease monotonically as tetrahydrofuran is added to the aqueous solvent system, indicating that water plays a role in the LGO isomerization reaction. Initial-rate analyses show that HMF is produced solely from LGO rather than from the hydrated derivative of LGO. Finally, the results of this study are consistent with a mechanism for LGO isomerization that proceeds through hydration of the anhydro bridge, followed by ring rearrangement analogous to the isomerization of glucose to fructose.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photon phase-space dynamics in a plasma wakefield accelerator

Frequency up-shifting of laser light in a beam-driven plasma wakefield has the potential to provide high-intensity sources of short wavelength radiation. Simulations have demonstrated that a laser pulse can undergo large frequency shifts, limited only by the drive beam energy, when the plasma density is tailored to match the accelerating phase of the wake to the group velocity of the pulse. Here, we study the dynamical evolution of photons in the 1D1P phase-space vicinity of the plasma wake-phase matching condition. Numerical calculations using a photon kinetic model are validated by direct comparison with 1D and quasi-3D particle-in-cell simulations. These calculations form the basis of a linear theory of the photon dynamics which reveals several important results, including scalings for the properties of the witness pulse and a self-similar solution for the photon phase-space dynamics. One prediction of the analytic theory is that the pulse can be compressed indefinitely, though the amount of compression would ultimately be limited by practical constraints. These results suggest that photon acceleration can provide a novel source of sub-femtosecond, short wavelength radiation.

XUV generation↗

FORMATION OF C{sub n} MOLECULES IN OXYGEN-RICH INTERIORS OF TYPE II SUPERNOVAE

Two reaction-rate-based kinetic models for condensation of carbon dust via the growth of precursor linear carbon chains are currently under debate: the first involves the formation of C{sub 2} molecules via radiative association of free C atoms, and the second forms C{sub 2} molecules by the endoergic reaction CO + C {yields} C{sub 2} + O. Both are followed by C captures until the linear chain eventually makes an isomeric transition to ringed carbon on which rapid growth of graphite may occur. These two approaches give vastly different results. Because of the high importance of condensable carbon for current problems in astronomy, we study these competing claims with an intentionally limited reaction rate network which clearly shows that initiation by C + C {yields} C{sub 2} + {gamma} is the dominant pathway to carbon rings. We propose an explanation for why the second pathway is not nearly as effective as its proponents calculated it to be.

74 ATOMIC AND MOLECULAR PHYSICS↗

Low and High Temperature Combustion Chemistry of Butanol Isomers in Premixed Flames and Autoignition Systems

Butanol is a fuel that has been proposed as a bio-derived alternative to conventional petroleum derived fuels. The structural isomer in traditional 'bio-butanol' fuel is n-butanol, but newer conversion technologies produce iso-butanol as a fuel. In order to better understand the combustion chemistry of bio-butanol, this study presents a comprehensive chemical kinetic model for all the four isomers of butanol (e.g., 1-, 2-, iso- and tert-butanol). The proposed model includes detailed high temperature and low temperature reaction pathways. In this study, the primary experimental validation target for the model is premixed flat low-pressure flame species profiles obtained using molecular beam mass spectrometry (MBMS). The model is also validated against previously published data for premixed flame velocity and n-butanol rapid compression machine and shock tube ignition delay. The agreement with these data sets is reasonably good. The dominant reaction pathways at the various pressures and temperatures studied are elucidated. At low temperature conditions, we found that the reaction of alphahydroxybutyl with O{sub 2} was important in controlling the reactivity of the system, and for correctly predicting C{sub 4} aldehyde profiles in low pressure premixed flames. Enol-keto isomerization reactions assisted by HO{sub 2} were also found to be important in converting enols to aldehydes and ketones in the low pressure premixed flames. In the paper, we describe how the structural features of the four different butanol isomers lead to differences in the combustion properties of each isomer.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A projection-based analytical Jacobian framework for chemical kinetics applications

A major challenge in simulating complex combustion systems with detailed chemical kinetic models is the cost of integrating the chemical source terms, often done using stiff ODE solvers that require frequent Jacobian evaluations. Using analytically derived Jacobian matrices instead of divided-difference-based numerical Jacobian approximations can significantly reduce the associated computational cost. However, ambiguities arise in the formulation of analytical Jacobians because the chemical state of the system, or state vector, can be expressed in multiple ways, involving variables that are typically not independent from one another. Here, in this work, the consequences of those ambiguities on practical calculations are characterized in detail, and a generalized, projection-based framework is proposed as a mitigation strategy. Performances are assessed in a series of test cases involving a variety of configurations and numerical solution approaches. Results show that with proper treatment, commonly used analytical Jacobian formulations can be considered as equivalent for practical purposes, thereby alleviating concerns that the state vector chosen to express the governing equations and corresponding analytical Jacobian may significantly impact the accuracy of the simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of magnetic CoFe{sub 2}O{sub 4}-functionalized graphene sheets via a facile hydrothermal method and their adsorption properties

Magnetic CoFe{sub 2}O{sub 4}-functionalized graphene sheets (CoFe{sub 2}O{sub 4}-FGS) nanocomposites have been synthesized by hydrothermal treatment of inorganic salts and thermal exfoliated graphene sheets. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations show that cobalt ferrite nanoparticles with sizes of 10-40 nm are well dispersed on graphene sheets. OH{sup -} was recognized as a tie to integrate the inorganic salts with the graphene sheets, which made reaction started and developed on the surface of graphene sheets and formed cobalt ferrite nanoparticles on graphene sheets. The adsorption kinetics investigation revealed that the adsorption of methyl orange from aqueous solution over the as-prepared CoFe{sub 2}O{sub 4}-FGS nanocomposites followed pseudo-second-order kinetic model and the adsorption capacity was examined as high as 71.54 mg g{sup -1}. The combination of the superior adsorption of FGS and the magnetic properties of CoFe{sub 2}O{sub 4} nanoparticles can be used as a powerful separation tool to deal with water pollution. -- Graphical abstract: OH{sup -} was recognized as a tie to integrate the inorganic salts with the graphene sheets, which made reaction started and developed on the surface of graphene sheets and formed cobalt ferrite nanoparticles on graphene sheets. Display Omitted Research highlights: {yields} CoFe{sub 2}O{sub 4}-FGS have been prepared via a facile hydrothermal method. {yields} CoFe{sub 2}O{sub 4} nanoparticles with sizes of 10-40 nm are well dispersed on graphene sheets. {yields} CoFe{sub 2}O{sub 4}-FGS with superior adsorption can be used for water treatment.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Breakdown in helium in high-voltage open discharge with subnanosecond current front rise

Investigations of high-voltage open discharge in helium have shown a possibility of generation of current pulses with subnanosecond front rise, due to ultra-fast breakdown development. The open discharge is ignited between two planar cathodes with mesh anode in the middle between them. For gas pressure 6 Torr and 20 kV applied voltage, the rate of current rise reaches 500 A/(cm{sup 2} ns) for current density 200 A/cm{sup 2} and more. The time of breakdown development was measured for different helium pressures and a kinetic model of breakdown in open discharge is presented, based on elementary reactions for electrons, ions and fast atoms. The model also includes various cathode emission processes due to cathode bombardment by ions, fast atoms, electrons and photons of resonant radiation with Doppler shift of frequency. It is shown, that the dominating emission processes depend on the evolution of the discharge voltage during the breakdown. In the simulations, two cases of voltage behavior were considered: (i) the voltage is kept constant during the breakdown; (ii) the voltage is reduced with the growth of current. For the first case, the exponentially growing current is maintained due to photoemission by the resonant photons with Doppler-shifted frequency. For the second case, the dominating factor of current growth is the secondary electron emission. In both cases, the subnanosecond rise of discharge current was obtained. Also the effect of gas pressure on breakdown development was considered. It was found that for 20 Torr gas pressure the time of current rise decreases to 0.1 ns, which is in agreement with experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of non-thermal termolecular reactions on wedge-induced oblique detonation waves

The shock-induced combustion ramjet (Shcramjet) based on oblique detonation waves (ODWs) is among the promising choices for hypersonic propulsion systems. An understanding of the ignition, propagation, and stability of ODWs is critical to harnessing their propulsive potential. In such high speed reacting flows, there is a high probability of occurrence of non-thermal reactions due to the presence of non-trivial amounts of highly reactive radicals including H, O and OH apart from O 2 as demonstrated recently [M. P. Burke, S. J. Klippenstein, Nat. Chem. 9 (2017) 1078–1082, Y. Tao, A. W. Jasper, Y. Georgievskii, S. J. Klippenstein, R. Sivaramakrishnan, Proc. Combust. Inst. 38 (2021) 515–522]. The present work focuses on examining the initiation, propagation and structure of oblique detonation waves in stoichiometric H 2 -air mixtures through numerical simulations with and without non-thermal reactivity on a two-dimensional adaptive grid. Non-thermal reactions were included in the macroscopic kinetic model as chemically termolecular reactions facilitated by the H + OH radical-radical recombination and the H + O 2 radical-molecule association reactions. Since, the non-thermal reactions result in a corresponding decrease in the reaction fluxes of the incipient recombination/association reactions, an additional simulation was performed by applying corrections to the respective incipient recombination/association rate constants using the methodology demonstrated by Tao et al. [Y. Tao, A. W. Jasper, Y. Georgievskii, S. J. Klippenstein, R. Sivaramakrishnan, Proc. Combust. Inst. 38 (2021) 515–522]. Results show that, under ODWE relevant conditions, non-thermal reactivity fundamentally alters the induction length, intensity as well as the structure of the ODW. Specifically, it is found that non-thermal reactivity leads to a noticeable reduction in initiation length and a simultaneous increase in instantaneous peak heat release rate and the degree of unsteadiness of the ODW. Finally, statistical analysis of key thermo-chemical variables is performed to elucidate the important species as well as reactions responsible for the observed variations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser photolysis of fluorone dyes in a chitosan matrix

Kinetics of laser-induced photobleaching of fluorone dyes (fluorescein, dibromofluorescein, eosin Y, erythrosin B, Rose Bengal) is studied in a chitosan matrix. For all dyes the bleaching kinetics at the intensities of laser radiation 0.7 - 11.9 W cm{sup -2} demonstrates quasi-monomolecular behaviour. The results are analysed using a kinetic model, based on the four-level (S{sub 0}, S{sub 1}, T{sub 1}, T{sub n}) scheme of the dye with chemically active triplet states taken into account. It is shown that the rate constants of the chemical reaction involving higher triplet states in the dyes studied amount to (3.9 - 18.6) Multiplication-Sign 10{sup 6} s{sup -1} and exceed the analogous values for the reaction involving the first lower triplet states by nine orders of magnitude. The rate of reaction involving the first triplet states appeared to be higher by one - two orders of magnitude than that in the case of higher triplet states involved because of low population of the latter. The possible mechanism of dye bleaching with participation of chitosan that consists in reduction of the dye to the leuco form by transfer of hydrogen from the chitosan matrix is discussed. (interaction of laser radiation with matter. laser plasmas)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arsenic remediation of drinking water using iron-oxide coated coal bottom ash

We describe laboratory and field results of a novel arsenic removal adsorbent called 'Arsenic Removal Using Bottom Ash' (ARUBA). ARUBA is prepared by coating particles of coal bottom ash, a waste material from coal fired power plants, with iron (hydr)oxide. The coating process is simple and conducted at room temperature and atmospheric pressure. Material costs for ARUBA are estimated to be low (~;;$0.08 per kg) and arsenic remediation with ARUBA has the potential to be affordable to resource-constrained communities. ARUBA is used for removing arsenic via a dispersal-and-removal process, and we envision that ARUBA would be used in community-scale water treatment centers. We show that ARUBA is able to reduce arsenic concentrations in contaminated Bangladesh groundwater to below the Bangladesh standard of 50 ppb. Using the Langmuir isotherm (R2 = 0.77) ARUBA's adsorption capacity in treating real groundwater is 2.6x10-6 mol/g (0.20 mg/g). Time-to-90percent (defined as the time interval for ARUBA to remove 90percent of the total amount of arsenic that is removed at equilibrium) is less than one hour. Reaction rates (pseudo-second-order kinetic model, R2>_ 0.99) increase from 2.4x105 to 7.2x105 g mol-1 min-1 as the groundwater arsenic concentration decreases from 560 to 170 ppb. We show that ARUBA's arsenic adsorption density (AAD), defined as the milligrams of arsenic removed at equilibrium per gram of ARUBA added, is linearly dependent on the initial arsenic concentration of the groundwater sample, for initial arsenic concentrations of up to 1600 ppb and an ARUBA dose of 4.0 g/L. This makes it easy to determine the amount of ARUBA required to treat a groundwater source when its arsenic concentration is known and less than 1600 ppb. Storing contaminated groundwater for two to three days before treatment is seen to significantly increase ARUBA's AAD. ARUBA can be separated from treated water by coagulation and clarification, which is expected to be less expensive than filtration of micron-scale particles, further contributing to the affordability of a community-scale water treatment center.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗