Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Validation of the filament winding process model

Tests were performed toward validating the WIND model developed previously for simulating the filament winding of composite cylinders. In these tests two 24 in. long, 8 in. diam and 0.285 in. thick cylinders, made of IM-6G fibers and HBRF-55 resin, were wound at + or - 45 deg angle on steel mandrels. The temperatures on the inner and outer surfaces and inside the composite cylinders were recorded during oven cure. The temperatures inside the cylinders were also calculated by the WIND model. The measured and calculated temperatures were then compared. In addition, the degree of cure and resin viscosity distributions inside the cylinders were calculated for the conditions which existed in the tests.

Calius, Emilo P.↗

Spacecraft protective structures design optimization

The optimization of spacecraft protective structures design to defeat hypervelocity impacts of meteoroids and space debris is presented. A space debris environment model is incorporated into an overall optimization methodology employing engineering models developed to predict protective structures design requirements for hypervelocity impact loads. Several nonlinear optimization techniques are used to generate design parametrics based on environment, mission, and configuration variables for the Space Station Core Module Configuration. Results indicate that careful consideration of the spacecraft structural configuration and materials can partially offset the design consequences of dramatic increases in the orbital space debris environment. Furthermore, the use of nonlinear optimization techniques coupled with hypervelocity impact engineering models can provide significant design tradeoff insight through the use of parametric analyses.

Mog, Robert A.↗

Observations on Rotating Cavitation and Cavitation Surge from the Development of the Fastrac Engine Turbopump

Observations regarding rotating cavitation and cavitation surge experienced during the development of the Fastrac engine turbopump are discussed. Detailed observations acquired from the analysis of both water flow and liquid oxygen test data are offered in this paper. Scaling and general comparison of rotating cavitation between water flow and liquid oxygen testing are discussed. Complex data features linking the localized rotating cavitation mechanism of the inducer to system surge components are described in detail. Finally a description of a lumped-parameter hydraulic system model developed to better understand observed data is given.

Zoladz, Thomas F.↗

Energy Band Gap Study of Semiconducting Single Walled Carbon Nanotube Bundle

The electronic properties of multiple semiconducting single walled carbon nanotubes (s-SWCNTs) considering various distribution inside a bundle are studied. The model derived from the proposed analytical potential function of electron density for na individual s-SWCNT is general and can be easily applied to multiple nanotubes. This work demonstrates that regardless the number of carbon nanotubes, the strong coupling occurring between the closet neighbors reduces the energy band gap of the bundle by 10%. As expected, the coupling is strongly dependent on the distance separating the s-SWCNTs. In addition, based on the developed model, it is proposed to enhance this coupling effect by applying an electric field across the bundle to significantly reduce the energy band gap of the bundle by 20%.

semiconducting single-wall carbon nanotube↗

The TAME Project: Towards improvement-oriented software environments

Experience from a dozen years of analyzing software engineering processes and products is summarized as a set of software engineering and measurement principles that argue for software engineering process models that integrate sound planning and analysis into the construction process. In the TAME (Tailoring A Measurement Environment) project at the University of Maryland, such an improvement-oriented software engineering process model was developed that uses the goal/question/metric paradigm to integrate the constructive and analytic aspects of software development. The model provides a mechanism for formalizing the characterization and planning tasks, controlling and improving projects based on quantitative analysis, learning in a deeper and more systematic way about the software process and product, and feeding the appropriate experience back into the current and future projects. The TAME system is an instantiation of the TAME software engineering process model as an ISEE (integrated software engineering environment). The first in a series of TAME system prototypes has been developed. An assessment of experience with this first limited prototype is presented including a reassessment of its initial architecture.

Basili, Victor R.↗

Object-Oriented Control System Design Using On-Line Training of Artificial Neural Networks

This report deals with the object-oriented model development of a neuro-controller design for permanent magnet (PM) dc motor drives. The system under study is described as a collection of interacting objects. Each object module describes the object behaviors, called methods. The characteristics of the object are included in its variables. The knowledge of the object exists within its variables, and the performance is determined by its methods. This structure maps well to the real world objects that comprise the system being modeled. A dynamic learning architecture that possesses the capabilities of simultaneous on-line identification and control is incorporated to enforce constraints on connections and control the dynamics of the motor. The control action is implemented "on-line", in "real time" in such a way that the predicted trajectory follows a specified reference model. A design example of controlling a PM dc motor drive on-line shows the effectiveness of the design tool. This will therefore be very useful in aerospace applications. It is expected to provide an innovative and noval software model for the rocket engine numerical simulator executive.

Rubaai, Ahmed↗

Energy Band Gap Study of Semiconducting Single Walled Carbon Nanotube Bundle

The electronic properties of multiple semiconducting single walled carbon nanotubes (s-SWCNTs) considering various distribution inside a bundle are studied. The model derived from the proposed analytical potential function of the electron density for an individual s-SWCNT is general and can be easily applied to multiple nanotubes. This work demonstrates that regardless the number of carbon nanotubes, the strong coupling occurring between the closest neighbours reduces the energy band gap of the bundle by 10%. As expected, the coupling is strongly dependent on the distance separating the s-SWCNTs. In addition, based on the developed model, it is proposed to enhance this coupling effect by applying an electric field across the bundle to significantly reduce the energy band gap of the bundle by 20%.

potential function↗

Phenomena Portal: Large- Scale Visual Exploration of Atmospheric Phenomena

The Earth science community is experiencing a high influx of remote sensing data due to recent advancements in sensor technology. This enables the community to extend their research on a larger scale than ever before. Unfortunately, traditional data processing techniques do not scale well to these new, high volume data sources. State-of-the-art machine learning (ML) pipelines have been proven to overcome these burdens in various other fields but are underexploited within the physical sciences community. Moreover, ML is reliant on labeled data, which is currently sparsely available, owing to the fact that ML adoption is still in the early stages within the Earth and atmospheric science communities. To address these issues, we developed the Phenomena Portal, a visual exploration tool that uses ML to detect various atmospheric phenomena on a global scale. This allows the Earth and atmospheric science communities to view trends of occurrences of phenomena, identify potential relationships between them, and analyze spatiotemporal patterns over time. These detections can also serve as initial labeled data for ML research pertaining to the respective phenomena. The tool also incorporates feedback from subject matter experts to further improve the model detection accuracy, thereby facilitating human-in-the-loop. This presentation will provide an overview of the ML model development and cloud deployment. We also discuss the capabilities of the user interface for displaying the detections.

Muthukumaran Ramasubramanian↗

Lidar-Based Safe Site Relative Navigation

There has been a renewed focus in exploration of the lunar surface and maximizing scientific potential of such missions is made possible in part by minimizing the time required to set up operations; that is, reducing transit time on the surface by increasing the landing precision with respect to the intended target. Established SPLICE project precision landing requirements necessitate a navigation filter architecture and underlying models developed specifically with these needs in mind. To date, test flights to characterize SPLICE GNC system performance have not provided a means to divert from the a priori selected landing site due to hazardous conditions. With the inclusion of a new sensor, the HDL, coupled with safe landing site selection algorithms, GNC can divert from the originally planned trajectory and navigate relative to the new targeted landing site. This work presents a novel hazard relative measurement model and covariance transformation methodology that enable the navigation system to inform a safe-site relative guidance profile to meet project precision landing goals.

Navigation↗

Prototyping and implementing flight qualifiable semicustom CMOS P-well bulk integrated circuits in the JPL environment

Presently, there are many difficulties associated with implementing application specific custom or semi-custom (standard cell based) integrated circuits (ICs) into JPL flight projects. One of the primary difficulties is developing prototype semi-custom integrated circuits for use and evaluation in engineering prototype flight hardware. The prototype semi-custom ICs must be extremely cost-effective and yet still representative of flight qualifiable versions of the design. A second difficulty is encountered in the transport of the design from engineering prototype quality to flight quality. Normally, flight quality integrated circuits have stringent quality standards, must be radiation resistant and should consume minimal power. It is often not necessary or cost effective, however, to impose such stringent quality standards on engineering models developed for systems analysis in controlled lab environments. This article presents work originally initiated for ground based applications that also addresses these two problems. Furthermore, this article suggests a method that has been shown successful in prototyping flight quality semi-custom ICs through the Metal Oxide Semiconductor Implementation Service (MOSIS) program run by the University of Southern California's Information Sciences Institute. The method has been used successfully to design and fabricate through the MOSIS three different semi-custom prototype CMOS p-well chips. The three designs make use of the work presented and were designed consistent with design techniques and structures that are flight qualifiable, allowing one hour transfer of the design from engineering model status to flight qualifiable foundry-ready status through methods outlined in this article.

Olson, E. M.↗

Prediction of high frequency combustion instability in liquid propellant rocket engines

The present use of a numerical model developed for the prediction of high-frequency combustion stabilities in liquid propellant rocket engines focuses on (1) the overall behavior of nonlinear combustion instabilities (2) the effects of acoustic oscillations on the fuel-droplet vaporization and combustion process in stable and unstable engine operating conditions, oscillating flowfields, and liquid-fuel trajectories during combustion instability, and (3) the effects of such design parameters as inlet boundary conditions, initial spray conditions, and baffle length. The numerical model has yielded predictions of the tangential-mode combustion instability; baffle length and droplet size variations are noted to have significant effects on engine stability.

Kim, Y. M.↗

State of Wildfires

Fire is an essential component of ecosystems and acts as key driver of biogeochemical cycling with impacts on vegetation structure and composition, soil conditions, and climate feedbacks. Fire behavior and effects vary based on the types of fuel, fuel dryness, and frequency of ignition. Due to changing climate and land use patterns, fire danger is increasing in many regions globally, and fires are having increasingly devastating impacts on human health, infrastructure, and ecosystem services. Recurrent fires help to determine the distribution of trees and grasses, and overall fuel load, which inform the behavior of future fires. Process-based models can be used to capture multi-scale impacts at the forest stand-level up to the landscape level, and across minutes to centuries, but must capture variation in fire behavior and intensity as a function of the fuel and climate, from high intensity forest crown fires within boreal regions to low intensity rapid grass fires of the tropics. Fire model development demonstrates our ability to capture large scale fire influenced biogeography and vegetation distribution at the earth system scale through vegetation traits and fire feedbacks. At the individual stand scale the importance of interactions and feedbacks between above and below ground process is essential to capturing the vegetation dynamics across boreal forest systems. Improving the mechanics of including plant physiology and specifically live fuel moisture content is the next step to advancing the capability of process based models to inform fire research. Advances in the testing and creation of a mechanistic live fuel moisture model demonstrate the foundation for future live fuel dynamics research that can be informed by field and remote sensing information. Improved remote sensing, technological and modeling capabilities support a more comprehensive and cohesive fire response that will be better equipped to overcome current barriers and anticipate the new reality of fires in a warming world.

wildfires↗

A model of the effect of the satellite photosheath on a double floating probe system

Description of a model developed to predict the interactions between multiple electrostatic probes separated by distances that are shorter than or comparable to the characteristic plasma shielding length. The computation involves crude approximations accounting for space charge effects, currents due to the emission and exchange of photoelectrons, and currents from the ambient plasma. Floating potentials are calculated by requiring current balance for each probe and solving by iterating the resulting coupled nonlinear equations. Although only qualitative accuracy is claimed, predictions using the model are found to be in good agreement with observations from the Explorer 45 satellite. The Explorer 45 satellite measures the potential difference between a pair of symmetrical spherical floating probes. The Explorer 45 data show that with increasing altitude, first, the sunward sphere will typically assume a more negative potential than the antisunward sphere; second, the polarities of the probes in the region L = 2 to 4 may switch, sometimes several times; and, finally, near the plasmapause the detector output may saturate, the sunward sphere being more negative.

Cauffman, D. P.↗

Comparison of Coupled Radiative Flow Solutions with Project Fire 2 Flight Data

A nonequilibrium, axisymmetric, Navier-Stokes flow solver with coupled radiation has been developed for use in the design or thermal protection systems for vehicles where radiation effects are important. The present method has been compared with an existing now and radiation solver and with the Project Fire 2 experimental data. Good agreement has been obtained over the entire Fire 2 trajectory with the experimentally determined values of the stagnation radiation intensity in the 0.2-6.2 eV range and with the total stagnation heating. The effects of a number of flow models are examined to determine which combination of physical models produces the best agreement with the experimental data. These models include radiation coupling, multitemperature thermal models, and finite rate chemistry. Finally, the computational efficiency of the present model is evaluated. The radiation properties model developed for this study is shown to offer significant computational savings compared to existing codes.

Olynick, David R.↗

Passive Thermal Control of the Primordial Inflation Polarization Explorer (PIPER) Flight Electronics

The scientific balloon program at NASA offers an exciting and open area of opportunity for testing new technologies and for conducting meaningful experimentation at a fraction of the cost of a space mission. This paper outlines a simple thermal model developed and employed for the Primordial Inflation Polarization ExplorER (PIPER). The sub-orbital environment that PIPER operates in hosts an interesting mix of atmospheric and space thermal challenges. The work done was to mitigate thermal loads and passively cool the payload's exterior mounted electronics at an altitude of 36.6 km. This was done by characterizing the thermal environment and then designing solutions for the heat loads through a combined radiation and conduction passive cooling radiator system thermal model. Despite the simplicity and subsequent limitations of the model, as well as some unexpected payload operational events, the model produced results between 0.31% and 11.8% difference between the predicted values and measured average temperatures. From these results, the model was able to successfully provide estimates for the electronics temperatures. Additional flights will be needed to eliminate unknowns encountered in this flight in order to further refine the model for higher accuracy.

Walts, Alexander R.↗

GASP-PL/I Simulation of Integrated Avionic System Processor Architectures

A development study sponsored by NASA was completed in July 1977 which proposed a complete integration of all aircraft instrumentation into a single modular system. Instead of using the current single-function aircraft instruments, computers compiled and displayed inflight information for the pilot. A processor architecture called the Team Architecture was proposed. This is a hardware/software approach to high-reliability computer systems. A follow-up study of the proposed Team Architecture is reported. GASP-PL/1 simulation models are used to evaluate the operating characteristics of the Team Architecture. The problem, model development, simulation programs and results at length are presented. Also included are program input formats, outputs and listings.

Brent, G. A.↗

Simulator for concurrent processing data flow architectures

A software simulator capability of simulating execution of an algorithm graph on a given system under the Algorithm to Architecture Mapping Model (ATAMM) rules is presented. ATAMM is capable of modeling the execution of large-grained algorithms on distributed data flow architectures. Investigating the behavior and determining the performance of an ATAMM based system requires the aid of software tools. The ATAMM Simulator presented is capable of determining the performance of a system without having to build a hardware prototype. Case studies are performed on four algorithms to demonstrate the capabilities of the ATAMM Simulator. Simulated results are shown to be comparable to the experimental results of the Advanced Development Model System.

Malekpour, Mahyar R.↗

Friction Stir Welding of Curved Plates

Friction stir welding (FSW) is a remarkable technology for making butt and lap joints in aluminum alloys. The process operates by passing a rotating tool between two closely butted plates. This process generates heat and the heated material is stirred from both sides of the plates to generate a high quality weld. Application of this technique has a very broad field for NASA. In particular, NASA is interested in using this welding process to manufacture tanks and curved elements. Therefore, this research has been oriented to the study the FSW of curved plates. The study has covered a number of topics that are important in the model development and to uncover the physical process involve in the welding itself. The materials used for the experimental welds were as close to each other as we could possibly find, aluminum 5454-0 and 5456-0 with properties listed at http://matweb.com. The application of FSW to curved plates needs to consider the behavior that we observed in this study. There is going to be larger force in the normal direction (Fz) as the curvature of the plate increases. A particular model needs to be derived for each material and thickness. A more complete study should also include parameters such as spin rate, tool velocity, and power used. The force in the direction of motion (Fx) needs to be reconsidered to make sure of its variability with respect to other parameters such as velocity, thickness, etc. It seems like the curvature does not play a role in this case. Variations in temperature were found with respect to the curvature. However, these changes seem to be smaller than the effect on Fz. The temperatures were all below the melting point. We understand now that the process of FSW produces a three dimensional flow of material that takes place during the weld. This flow needs to be study in a more detailed way to see in which directions the flow of material is stronger. It could be possible to model the flow using a 2-dimensional model in the particular directions where the flow moves faster. More experimental information is required to enrich the knowledge about FSW, and from this point, derive useful mathematical formulas to optimize the process and the design of the machines that will perform it. More experiments and experimental equipment are required to uncover the mathematics of the process.

Sanchez, Nestor↗