Search NASA⌕ Search

SEARCH · Search NASA

Results for “NUCLEAR MAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Improved Chemical and Colloidal Stability of Gold Nanoparticles through Dendron Capping

Nanoparticle (NP) stability is imperative for commercialization of nanotechnology. In this study, we compare the stability of Au NPs with surfaces functionalized with oleylamine, dodecanethiol, and two dendritic ligands of different generations. Dendrimer ligands provide a significant increase in the chemical stability of Au NPs when analyzed by cyanide-induced NP decomposition as well as an investigation into their colloidal stability at ambient conditions. These results were supported by absorption measurements, transmission electron microscopy, thermogravimetric analysis, nuclear magnetic resonance, and small-angle transmission X-ray scattering and show that dendrimers play a key role in improving the chemical and colloidal stability of NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High-Resolution Comonomer Sequencing of Blocky Brominated Syndiotactic Polystyrene Copolymers Using 13C NMR Spectroscopy and Computer Simulations

This work demonstrates the first high-resolution comonomer sequencing of Blocky brominated syndiotactic polystyrene (sPS-co-sPS-Br) copolymers based on pentad assign- ments of the quaternary carbon region of the nuclear magnetic resonance spectrum. Copolymers containing p-bromostyrene (Br-Sty) units were prepared in matched sets using postpolymerization bromination methods carried out in the heterogeneous gel state (Blocky) and homogeneous solution state (Random). Quantitative information from the quaternary carbon spectra, heteronuclear multiple bond correlation spectroscopy, electronic structure calculations, and simulated statistically random copolymers was correlated to confirm the carbon resonance assignments for all 20 possible pentad comonomer sequences. Using the experimental pentad sequence prevalences, a computer code was developed to simulate chains with microstructures typical of each sample as a means to visually represent the copolymer blockiness with quantitative precision. Based on the microstructure and distribution of run lengths in these chains, the simulations revealed that the Blocky copolymers contain a high degree of blockiness. By comparing the run lengths in the simulated chains to the average number of styrene units in a crystalline segment of sPS (found by small-angle X-ray scattering), copolymer crystallizability was predicted. For the simulated Blocky B-21% (21 mol % Br-Sty) chain, the probability of randomly selecting a styrene unit in a crystallizable block was 25.8%, while that in the simulated Random R-18% was zero, in excellent agreement with the experimental crystallization behavior measured by differential scanning calorimetry. Additionally, these predictions confirmed that the simulated chains accurately represent the ensemble of chains in their respective copolymer samples. Furthermore, each simulated Blocky chain contained one or more long sPS blocks that paralleled the measured 38-40 styrene units spanning a crystalline segment within the sPS/CCl4 gel. This finding affirmed that the long sPS segments originated from the precise lamellar structure within the heterogeneous gel morphology (i.e., block length is correlated with lamellar thickness). Overall, the ability to tailor the copolymer microstructure through control of the semicrystalline gel morphology opens the door to synthesizing ordered copolymers by postpolymerization functionalization processes with unprecedented levels of compositional control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Localized and Collective Dynamics in Liquid-like Polyethylenimine-Based Nanoparticle Organic Hybrid Materials

In this work, broadband dielectric spectroscopy, rheology, and nuclear magnetic resonance spectroscopy are employed to study molecular dynamics in a nanoparticle organic hybrid materials(NOHMs)system comprising 20 wt% silica nanoparticles ionically-bonded to a polyethylenimine canopy. By comparing the neat polymer (used as a canopy) to the derivative NOHMs, we find that timescales characterizing segmental dynamics in the NOHM are identical to those for the neat polymer. Detailed analysis of the carbon-spin lattice relaxation times yields mechanistic insights into localized and collective dynamics, in quantitative agreement with dielectric results. Interestingly, the NOHMs retain liquid-like characteristics unlike conventional polymer nanocomposites but exhibit higher viscosity due to additional contributions from tethered polymer chains, and mesoscopic structuring. These findings demonstrate the potential of achieving unique and desired material properties via NOHMs by an informed choice of the canopy material.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Analysis of the Amorphous and Interphase Influence of Comononomer Loading on Polymer Properties toward Forwarding Bioadvantaged Copolyamides

In this paper we present an approach for selectively modifying the properties of semicrystalline polymers by introducing “bioadvantaged” counits. With this approach, the unique functionality of biomass can be leveraged to tailor the properties of the amorphous phase of semicrystalline polymers with minimal impact on crystallinity and thermomechanical properties. As a model case, PA 6,6 copolyamides were produced using the bioadvantaged monomer trans-3-hexenedioic acid (t3HDA). The analogous structure of t3HDA to adipic acid, a PA 6,6 monomer, allows for seamless integration. Screening over the entire composition range identified the t3HDA loading (20 mol%) beyond which properties deviate appreciably from Nylon 6,6. Once identified, copolyamides of suitable compositions were upgraded to commercial quality and fully characterized to assess the influence of counit loading and polymer structure on thermal and mechanical properties. Samples were characterized using gel permeation chromatography (GPC), proton nuclear magnetic resonance spectroscopy (1H NMR), heteronuclear single quantum coherence spectroscopy (HSQC), wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), tensile testing, flexural testing, and water absorption testing. t3HDA units were shown to hydrate during the harsh polycondensation to 3-hydroxyhexanedioic acid (3HHDA) and fully incorporate into the polymer backbone. Loading levels up to 20% were shown to have comparable thermal and mechanical properties in the dry state, yet moisture absorption—a known method for improving the toughness, yield strain, and elongation of polyamides—was enhanced by over 100% at 20% loading. This case study on bioadvantaged copolymers elucidates the governing structure-function principles that can be leveraged to forward value-added renewable polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Evolution of Chain Dynamics and Oxidation States with Increasing Chain Length for a Donor–Acceptor-Conjugated Oligomer Series

While it is known that the chain length strongly affects the properties of π-conjugated polymers, the effects of chain length on the molecular structure, chain conformation, and oxidation state properties in donor–acceptor-type conjugated structures remain unclear. This limits our understanding of how the polymer molecular weight impacts material properties. Here, a discrete and monodisperse oligomer series (n = 3, 5, 7, 9, 15, and 21) and polymers (nPB), composed of the donor 3,4-propylenedioxythiophene (ProDOT), the acceptor benzothiadiazole (BTD), and methylthio end-capping groups, are synthesized by C–H-activated cross-coupling. The molecular structure, molecular weight, and dispersity of each oligomer/polymer are thoroughly characterized by nuclear magnetic resonance spectroscopy, mass spectrometry, and gel permeation chromatography. This series reveals a rod-to-coil transition at n = 15 and coil formation at polymer length scales of ~28 units via solution small-angle neutron scattering characterization. The oxidation states are deciphered via cyclic voltammetry, differential pulse voltammetry, spectroelectrochemistry, and density functional theory calculations. Oligomers 3–9 undergo successive one-electron oxidation steps, while 15 and higher undergo multielectron oxidations per step in CH 2 Cl 2 –TBAPF6 at a Pt ultramicroelectrode. The electronic transition of each oxidation state (1+, 2+, 3+, etc.) is tracked by absorption spectroscopy, revealing a “bipolaron to di-polaron” transition at n = 7 at which shorter oligomers prefer bipolaron formation and longer oligomers prefer di-polaron formation in their dication states. Furthermore, oxidized 15 has a lower electronic transition energy compared to its polymer homologue, as shown by spectroelectrochemistry, revealing a synergy between the chain length and the oxidation state properties. This study proves that the convergence limit between small molecule and polymer behavior occurs at approximately 15 units and highlights the property transitions that occur as a function of chain length for a donor–acceptor class of conjugated organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Dynamics of Bottlebrush Polymers in Solution by Neutron Spin Echo Spectroscopy

In this work, we present dynamical and morphological studies on poly(dimethylsiloxane) (PDMS)-based bottlebrush polymers in solution. A combination of small-angle neutron scattering (SANS), pulsed field gradient nuclear magnetic resonance (PFG NMR), and neutron spin echo (NSE) spectroscopy was used to identify structural changes inherent in changing the side-chain length while keeping the backbone constant. These morphological changes are mirrored in the diffusion coefficient determined by PFG NMR, resulting in two coefficients for the elongated and one for the more spherical sample. Faster motions are tracked by NSE using the advantage of time- and length-scale resolutions with the diffusion coefficient predetermined by PFG NMR. Hereby, the sample with short side chains relaxes like wormlike micelles considering the longitudinal direction, whereas the dynamics along the radial extension shows a much stronger Q-dependence as known from any theory. The dynamical behavior within the blob region, covered with the more spherical sample, follows the predictions of Zimm as well as of Zilman and Granek (ZG).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mechanistic Insights into Processive Polyethylene Hydrogenolysis through In Situ NMR

Chemical polymer upcycling by processive catalysts is a promising plastic waste remediation strategy, with the capability of producing selective, high-value products from waste plastics with minimal energy input. We previously designed a novel processive catalyst with a mesoporous SiO 2 shell/Pt nanoparticle/SiO 2 core architecture (mSiO 2 /Pt/SiO 2 ) that deconstructs polyolefins within narrow pores. Here, in this paper, we elucidate the mechanism of processive polyolefin hydrogenolysis using in situ magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and coarse-grained molecular dynamics simulations. We observe that most polyethylene–Pt interactions do not lead to C–C bond cleavage but rather to the release of the polymer via a dehydrogenation–rehydrogenation cycle. The porous architecture increases the likelihood that a released polymer is later cleaved and enables the catalyst to perform multiple successive cleavages to the same polymer chain. Both experiment and simulation show that the extent of processivity is strongly correlated with the length of the pores, with longer pores leading to a higher processivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Water Dynamics of Superacid Aromatic Proton Exchange Membranes for Fuel Cell Applications

Proton exchange membranes (PEMs) with high conductivity are of critical importance for the development of fuel cells, electrolyzers, and other electrochemical technologies. In this research, poly(1,1,2,2-tetrafluoro-2-phenoxyethane-1-sulfonic acid) (PTPS) with an aromatic polymer main chain and a perfluorinated superacidic polymer side chain was synthesized. The water dynamics of PTPS were characterized across various length scales using a combination of Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) and compared with Nafion, a standard perfluorinated PEM, and sulfonated poly(ether sulfone) (SPES 40), an aromatic PEM without perfluorinated superacid side chains. The T 1 and T 2 relaxation times of water in the samples probed by NMR increase from SPES 40 to PTPS to Nafion, indicating that the local motion of the water molecules becomes faster. This trend corresponds well with the relative fraction of bulk-like water determined using FTIR. At larger length scales, the diffusion coefficient of water was characterized using pulsed-field gradient NMR (PFG-NMR). At a longer diffusion time (Δ = 100 ms), PTPS has a smaller diffusion coefficient compared with both Nafion and SPES 40, due to restricted diffusion, and this effect is also evident in the proton conductivity of the hydrated membranes. From this comparison, it is apparent that the aromatic backbone and side chain type greatly influence the water dynamics in PEMs at various length scales and the water dynamics significantly impact the bulk proton conductivity. These insights will lead to new designs for aromatic PEMs and help to identify bottlenecks in current materials.

25 ENERGY STORAGE↗
DOE OSTI2016

Relationship between Conductivity, Ion Diffusion, and Transference Number in Perfluoropolyether Electrolytes

Connecting continuum-scale ion transport properties such as conductivity and cation transference number to microscopic transport properties such as ion dissociation and ion self-diffusivities is an unresolved challenge in characterizing polymer electrolytes. Better understanding of the relationship between microscopic and continuum scale transport properties would enable the rational design of improved electrolytes for applications such as lithium batteries. Here, we present measurements of continuum and microscopic ion transport properties of nonflammable liquid electrolytes consisting of binary mixtures of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and perfluoropolyethers (PFPE) with different end groups: diol, dimethyl carbonate, ethoxy-diol, and ethoxy-dimethyl carbonate. The continuum properties, conductivity and cation transference number, were measured by ac impedance spectroscopy and potentiostatic polarization, respectively. The ion self-diffusivities were measured by pulsed field gradient nuclear magnetic resonance spectroscopy (PFG-NMR), and a microscopic cation transference number was calculated from these measurements. The measured ion self-diffusivities did not reflect the measured conductivities; in some cases, samples with high diffusivities exhibited low conductivity. We introduce a nondimensional parameter, β, that combines microscopic diffusivities and conductivity. We show that β is a sensitive function of end-group chemistry. In the ethoxylated electrolytes, β is close to unity, the value expected for electrolytes that obey the Nernst-Einstein equation. In these cases, the microscopic and continuum transference numbers are in reasonable agreement. PFPE electrolytes devoid of ethoxy groups exhibit values of β that are significantly lower than unity. In these cases, there is significant deviation between microscopic and continuum transference numbers. We propose that this may be due to electrostatic coupling of the cation and anion or contributions to the NMR signal from neutral ion pairs.

25 ENERGY STORAGE↗
DOE OSTI2016

Measuring the Degree of Crystallinity in Semicrystalline Regioregular Poly(3-hexylthiophene)

By using a combination of wide-angle X-ray diffraction (WAXD), mass density, and 13 C solid-state nuclear magnetic resonance (NMR) measurements, a quantification of the absolute degree of crystallinity in regioregular poly(3-hexylthiophene) (rr-P3HT) is presented. A regiorandom P3HT (rra-P3HT), lacking long-range order, was used to separate the crystalline contribution from the total scattering in WAXD, thus yielding degrees of crystallinity in the range of 47–56% at room temperature for three different rr-P3HTs. For the same rr-P3HT with identical processing history, NMR yields degrees of crystallinity that are consistently ~10% greater than that obtained by WAXD, which can only be explained by ordered chain segments in the amorphous phase. NMR results also suggest that rra-P3HT contains weakly ordered chain segments, which likely contribute to an underestimation of degree of crystallinity when determined from mass density measurements, if rra-P3HT is used to approximate a fully amorphous P3HT. The results shown in this study provide direct proof of three different types of P3HT chain segments: crystallites (i.e., long-range ordered chain packing), amorphous phase (i.e., disordered chain packing), and short-range ordered chain packing embedded in the amorphous phase. Here, the presence of the short-range ordered chain packing is particularly important when correlating the morphology to macroscopic charge transport properties in P3HT-based devices. In general, those locally ordered chain segments, though not constituting a distinct phase, are believed to be of critical importance in determining the transport characteristics of conjugated semiconducting polymers with or without a distinct crystalline phase present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

2-Isopropenyl-2-oxazoline: Well-Defined Homopolymers and Block Copolymers via Living Anionic Polymerization

Poly(2-isopropenyl-2-oxazoline) (PIPOx) has drawn significant attention for numerous applications. However, the successful living anionic polymerization of 2-isopropenyl-2-oxazoline has not been reported previously. In this paper, we describe how well-defined PIPOx with quantitative yields, controlled molecular weights from 6800 to over 100 000 g/mol and low polydispersity indices (PDI ≤ 1.17) were synthesized successfully via living anionic polymerization using diphenylmethylpotassium/diethylzinc (DPM-K/Et 2 Zn) in tetrahydrofuran (THF) at 0 °C. In particular, we report the precise synthesis of well-defined PIPOx with the highest molecular weight ever reported (over 100 000 g/mol) and low PDI of 1.17. The resulting polymers were characterized by 1 H and 13 C nuclear magnetic resonance spectroscopy (NMR) along with size exclusion chromatography (SEC). Additionally, the reactivity of living PIPOx was investigated by crossover block copolymerization with styrene (St), 2-vinylpyridine (2VP), and methyl methacrylate (MMA). It was found that the nucleophilicity of living PIPOx is of this order: living PS > living P2VP > living PMMA > living PIPOx. The self-assembly behavior in bulk of PIPOx-b-PS-b-PIPOx triblock copolymers having different block ratios of 10:80:10 and 25:50:25 was studied using transmission electron microscopy (TEM). Finally, the formation of spherical and lamellar nanostructures, respectively, was observed.

2-isopropenyl-2-oxazoline↗
DOE OSTI2018

NMR Methodologies for the Detection and Quantification of Nanostructural Defects in Silicone Networks

Here, we present and discuss a sensitive spectroscopic means of detecting and quantifying network defects within a series of polysiloxane elastomers through a novel application of 19F solution state nuclear magnetic resonance (NMR). Polysiloxanes are the most utilized non-carbon polymeric material today. Their final network structure is complex, hierarchical, and often ill-defined due to modification. Characterization of these materials with respect to starting and age-dependent network structure is obfuscated by the intractable nature of polysiloxane network elastomers. We report a synthetic strategy for selectively tagging chain-end silanols with an organofluorine compound, which may then be conveniently and quantitatively measured as a function of structure and environment by means of 19 F NMR. This study represents a new and sensitive means of directly quantifying aspects of network architecture in polysiloxane materials and has the potential to be a powerful new tool for the spectroscopic assessment of structural dynamic response in polysiloxane networks.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Investigation of Solvent Type and Salt Addition in High Transference Number Nonaqueous Polyelectrolyte Solutions for Lithium Ion Batteries

High Li + transference number electrolytes have attracted recent interest as a means to improve the energy density and rate capabilities of current lithium ion batteries. Here the viscosity and transport properties of a sulfonated polysulfone/poly(ethylene glycol) copolymer that displays both high transference number and high conductivity when dissolved in dimethyl sulfoxide (DMSO) are investigated for the first time in a battery-relevant solvent of nearly equivalent dielectric constant: mixed ethylene carbonate (EC)/dimethyl carbonate (DMC). The addition of a binary salt to each solution is investigated as a means to improve conductivity, and the diffusion coefficient of each species is tracked by pulse field gradient nuclear magnetic resonance (PFG-NMR). Through the 7 Li NMR peak width and quantum chemistry calculations of the dissociation constant, it is shown that although the two solvent systems have nearly equivalent dielectric constants, the conductivity and transference number of the EC/DMC solutions are significantly lower as a result of poor dissociation of the sulfonate group on the polymer backbone. These results are the first study of polyelectrolyte properties in a battery-relevant solvent and clearly demonstrate the need to consider solvent properties other than the dielectric constant in the design of these electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Nonideality in Silicone Network Formation via Solvent Swelling and 1 H Double-Quantum NMR

The versatile crosslinking chemistry of poly(dimethylsiloxane) (PDMS) based materials affords a large research space in which polymers with widely varying elastomeric properties may be synthesized. Parameters such as chain length, crosslink density, crosslink functionality, filler content, and chain chemistry can all be modified to produce materials with specific physical and mechanical properties. Commercial polysiloxane based, ‘silicone’ elastomers are generally intractable, which makes the precise characterization of their networks problematic. We report here the application of equilibrium solvent uptake analysis and 1 H double-quantum nuclear magnetic resonance ( 1 H DQ NMR) spectroscopy to determine the network topology of end-linked PDMS networks with non-ideal network topology. Despite their structural complexity, we can quantify both the classical and non-classical contributions to network structure using 1 H DQ NMR which are in reasonable agreement with solvent uptake data. These findings serve as the foundation for future investigations of even more complex commercial silicones using 1 H DQ NMR.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Enhanced Conductivity via Homopolymer-Rich Pathways in Block Polymer-Blended Electrolytes

The optimization of ionic conductivity and lithium-ion battery stability can be achieved by independently tuning the ion transport and mechanical robustness of block polymer (BP) electrolytes. However, the ionic conductivity of BP electrolytes is inherently limited by the covalent attachment of the ionically conductive block to the mechanically robust block, among other factors. Herein, the BP electrolyte polystyrene-block-poly(oligo-oxyethylene methacrylate) [PS-b-POEM] was blended with POEM homopolymers of varying molecular weights. The incorporation of a higher molecular weight homopolymer additive (α > 1 state) promoted a “dry brush-like” homopolymer distribution within the BP self-assembly and led to higher lithium salt concentrations in the more mobile homopolymer-rich region, increasing overall ionic conductivity relative to the “wet brush-like” (α < 1 state) and unblended composites, where α is the molecular weight ratio between the POEM homopolymer and the POEM block in the copolymer. Here, neutron and X-ray reflectometry (NR and XRR, respectively) provided additional details on the lithium salt and polymer distributions. From XRR, the α > 1 blends showed increased interfacial widths in comparison to their BP (unblended) or α < 1 counterparts because of the more central distribution of the homopolymer. This result, paired with NR data that suggested even salt concentrations across the POEM domains, implied that there was a higher salt concentration in the homopolymer POEM-rich regions in the dry brush blend than in the wet brush blend. Furthermore, using 7 Li solid-state nuclear magnetic resonance spectroscopy, we found a temperature corresponding to a transition in lithium mobility (T Li mobility ) that was a function of blend type. T Li mobility was found to be 39 °C above T g in all cases. Interestingly, the ionic conductivity of the blended BPs was highest in the α > 1 composites, even though these composites had higher T g s than the α < 1 composites, demonstrating that homopolymer-rich conducting pathways formed in the α > 1 assemblies had a larger influence on conductivity than the greater lithium ion mobility in the α < 1 blends.

25 ENERGY STORAGE↗
DOE OSTI2016

All-inorganic Germanium nanocrystal films by cationic ligand exchange

In this study, we introduce a new paradigm for group IV nanocrystal surface chemistry based on room temperature surface activation that enables ionic ligand exchange. Germanium nanocrystals synthesized in a gas-phase plasma reactor are functionalized with labile, cationic alkylammonium ligands rather than with traditional covalently bound groups. We employ Fourier transform infrared and 1H nuclear magnetic resonance spectroscopies to demonstrate the alkylammonium ligands are freely exchanged on the germanium nanocrystal surface with a variety of cationic ligands, including short inorganic ligands such as ammonium and alkali metal cations. This ionic ligand exchange chemistry is used to demonstrate enhanced transport in germanium nanocrystal films following ligand exchange as well as the first photovoltaic device based on an all-inorganic germanium nanocrystal absorber layer cast from solution. This new ligand chemistry should accelerate progress in utilizing germanium and other group IV nanocrystals for optoelectronic applications.

14 SOLAR ENERGY↗
DOE OSTI2016

Nanostructured Black Phosphorus/Ketjenblack–Multiwalled Carbon Nanotubes Composite as High Performance Anode Material for Sodium-Ion Batteries

Sodium-ion batteries are promising alternatives to lithium-ion batteries for large-scale applications. However, the low capacity and poor rate capability of existing anodes for sodium-ion batteries are bottlenecks for future developments. Here, we report a high performance nanostructured anode material for sodium-ion batteries that is fabricated by high energy ball milling to form black phosphorus/Ketjenblack–multiwalled carbon nanotubes (BPC) composite. With this strategy, the BPC composite with a high phosphorus content (70 wt %) could deliver a very high initial Coulombic efficiency (>90%) and high specific capacity with excellent cyclability at high rate of charge/discharge (~1700 mAh g–1 after 100 cycles at 1.3 A g–1 based on the mass of P). In situ electrochemical impedance spectroscopy, synchrotron high energy X-ray diffraction, ex situ small/wide-angle X-ray scattering, high resolution transmission electronic microscopy, and nuclear magnetic resonance were further used to unravel its superior sodium storage performance. The scientific findings gained in this work are expected to serve as a guide for future design on high performance anode material for sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Electrochemical Investigation of Low-Valent Multiply M≡M Bonded Group VI Dimers: A Standard Chemical Reduction Leads to an Unexpected Product

The synthesis and investigation of multimetallic complexes bearing metal–metal bonds have been significantly advanced over the last 30 years with exciting applications across many fields. While the outlook for synthetically innovative metal–metal species is promising, the reactivity of the classic M 2 X 6 alkyl dimers (where M = W, Mo; X = CH 2 CMe 3 , CH 2 SiMe 3 ) is still not fully understood. In particular, the redox characteristics of these complexes have not been explored by cyclic voltammetry (CV). In this work, W 2 (CH 2 CMe 3 ) 6 and Mo 2 (CH 2 CMe 3 ) 6 (1 and 2, respectively) were characterized using CV to show differing electrochemical behavior between the two species. Stoichiometric reactions, guided by the results of the CV experiments, led to the isolation of an alkylidyne-bridged dimer bearing a rare structural motif, W 2 (μ-CCMe 3 ) 2 (CH 2 CMe 3 ) 4 (3). Single-crystal X-ray diffraction (SCXRD) and 1 H and 13 C nuclear magnetic resonance spectroscopy (NMR) were used to establish the connectivity of the structure in the solid and solution phases. Density functional theory (DFT) calculations on 1–3 and the previously reported W 2 (CSiMe 3 ) 2 (CH 2 SiMe 3 ) 4 (4) were used to rationalize the reactivity of 1 to form 3 and the structural differences between 3 and 4. Complexes 3 and 4 constitute a case in which the stereoelectronic properties of the silyl neopentyl ligand can affect differences in structure and bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗