Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Determination of the optical properties of La 2-x Ba x CuO₄ for several dopings, including the anomalous x=1/8 phase

The optical properties of single crystals of the high-temperature superconductor La 2-x Ba x CuO₄ have been measured over a wide frequency and temperature range for light polarized in the a-b planes and along the c axis. Three different Ba concentrations have been examined, x=0.095 with a critical temperature T c =32 K, x=0.125 where the superconductivity is dramatically weakened with T c ≅2.4 K, and x=0.145 with T c ≅24 K. The in-plane behavior of the optical conductivity for these materials at high temperature is described by a Drude-like response with a scattering rate that decreases with temperature. Below T c in the x=0.095 and 0.145 materials there is a clear signature of the formation of a superconducting state in the optical properties allowing the superfluid density (ρ s0 ) and the penetration depth to be determined. In the anomalous 1/8 phase, some spectral weight shifts from lower to higher frequency (≳300 cm⁻¹) on cooling below the spin-ordering temperature T so ≅42 K, associated with the onset of spin-stripe order; we discuss alternative interpretations in terms of a conventional density-wave gap versus the response to pair-density-wave superconductivity. The two dopings for which a superconducting response is observed both fall on the universal scaling line ρ s0 /8≅4.4σ dc T c , which is consistent with the observation of strong dissipation within the a-b planes. The optical properties for light polarized along the c axis reveal an insulating character dominated by lattice vibrations, superimposed on a weak electronic background. No Josephson plasma edge is observed in the low-frequency reflectance along the c axis for x=1/8; however, sharp plasma edges are observed for x=0.095 and 0.145 below T c .

Homes, C. C.↗

Controlling octahedral rotations in a perovskite via strain doping

The perovskite unit cell is the fundamental building block of many functional materials. The manipulation of this crystal structure is known to be of central importance to controlling many technologically promising phenomena related to superconductivity, multiferroicity, mangetoresistivity, and photovoltaics. The broad range of properties that this structure can exhibit is in part due to the centrally coordinated octahedra bond flexibility, which allows for a multitude of distortions from the ideal highly symmetric structure. However, continuous and fine manipulation of these distortions has never been possible. Here, we show that controlled insertion of He atoms into an epitaxial perovskite film can be used to finely tune the lattice symmetry by modifying the local distortions, i.e., octahedral bonding angle and length. Orthorhombic SrRuO 3 films coherently grown on SrTiO 3 substrates are used as a model system. Implanted He atoms are confirmed to induce out-of-plane strain, which provides the ability to controllably shift the bulk-like orthorhombically distorted phase to a tetragonal structure by shifting the oxygen octahedra rotation pattern. Lastly, these results demonstrate that He implantation offers an entirely new pathway to strain engineering of perovskite-based complex oxide thin films, useful for creating new functionalities or properties in perovskite materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray phase contrast and absorption imaging for the quantification of transient cavitation in high-speed nozzle flows

In this work, high-flux synchrotron radiation has been employed in a time-resolved manner to characterise the distinct topology features and dynamics of different cavitation regimes arising in a throttle orifice with an abrupt flow-entry contraction. Radiographs obtained though both X-ray phase- contrast and absorption imaging have been captured at 67,890 frames per second. The flow lied in the turbulent regime (Re=35,500), while moderate (CN=2.0) to well-established (CN=6.0) cavitation conditions were examined encompassing the cloud and vortical cavitation regimes with pertinent transient features, such as cloud-cavity shedding. X-ray Phase-Contrast Imaging (XPCI), exploiting the shift in the X-ray wave phase during interactions with matter, offers sharp-refractive index gradients in the interface region. Hence, it is suitable for capturing fine morphological fluctuations of transient cavitation structures. Nevertheless, the technique cannot provide information on the quantity of vapour within the orifice. Such data have been obtained utilising absorption imaging, where beam attenuation is not associated with scattering and refraction events, and hence can be explicitly correlated with the projected vapour thickness in line-of-sight measurements. A combination of the two methods is proposed, as it has been found is capable of quantifying the vapour content arising in the complex nozzle flow, while also faithfully illustrating the dynamics of the highly-transient cavitation features.

42 ENGINEERING↗

One-dimensional WO{sub 3} and its hydrate: One-step synthesis, structural and spectroscopic characterization

We report on a one-step hydrothermal growth of one-dimensional (1D) WO{sub 3} nanostructures, using urea as 1D growth-directing agent and a precursor free of metals other than tungsten. By decreasing the pH of the starting solution, the size of the nanostructures was reduced significantly, this development being accompanied by the realization of phase pure hexagonal WO{sub 3} nanorods (elimination of monoclinic impurity phase) and a red shift in optical absorption edge. Surface analyses indicated the presence of reduced tungsten species in the WO{sub 3} nanostructures, which increased two-fold in a hydrated WO{sub 3} phase obtained with further decrease in pH. We suggest that oxygen vacancies are responsible for this defect state in WO{sub 3}, while protons are responsible or contribute significantly to the same in the hydrated phase. - Graphical abstract: The figure illustrates the role of pH in morphological and absorption edge evolution of WO{sub 3} (hydrate) as well as the variation in the concentration of defect electrons between anhydrous and hydrated WO{sub 3}. Highlights: Black-Right-Pointing-Pointer WO{sub 3} nanorods prepared in a one step procedure. Black-Right-Pointing-Pointer HCl (aq) enables phase pure WO{sub 3} nanorods. Black-Right-Pointing-Pointer HCl (aq) induces significant reduction in dimension of and red shift in absorption edge of nanorods. Black-Right-Pointing-Pointer W{sup 5+} detected in hydrothermal WO{sub 3} phase, the concentration of which increases in the hydrated phase. Black-Right-Pointing-Pointer W{sup 5+} from the two phases due to different positive defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Status Update of a Harmonic Kicker Development for JLEIC

The Jefferson Lab Electron-Ion Collider (JLEIC) is an asymmetric high luminosity ring-ring collider proposed as the next major R&D facility for the nuclear physics community. Both of JLEIC?s electron and ion collider rings have high beam current with gaps serving the pur-poses of beam abort, ion clearing, etc. Those gaps will cause time-varying beam loading in the storage RF cavi-ties, and may result in modulation of cavity RF phase/voltage and cyclic shift of collision point, which could lead to significant luminosity loss. We studied a few approaches to mitigate the RF phase modulation and IP shift, such as correcting the RF phase/voltage modula-tion with traditional LLRF feedback, one-turn feedback (OTFB), or RF feedforward (FF); optimizing the bunch fill pattern to limit the RF phase/voltage modulation to a small fraction of the bunch trains in the collider ring; or matching the RF phase modulation in the two rings. The preliminary results are discussed in this paper.

Guo, Jiquan↗

Dynamics of Microbial Community Composition and Function during In Situ Bioremediation of a Uranium-Contaminated Aquifer

A pilot-scale system was established to examine the feasibility of in situ U(VI) immobilization at a highly contaminated aquifer (U.S. DOE Integrated Field Research Challenge site, Oak Ridge, TN). Ethanol was injected intermittently as an electron donor to stimulate microbial U(VI) reduction, and U(VI) concentrations fell to below the Environmental Protection Agency drinking water standard (0.03 mg liter 1). Microbial communities from three monitoring wells were examined during active U(VI) reduction and maintenance phases with GeoChip, a high-density, comprehensive functional gene array. The overall microbial community structure exhibited a considerable shift over the remediation phases examined. GeoChip-based analysis revealed that Fe(III)-reducing bacterial (FeRB), nitrate-reducing bacterial (NRB), and sulfate-reducing bacterial (SRB) functional populations reached their highest levels during the active U(VI) reduction phase (days 137 to 370), in which denitrification and Fe(III) and sulfate reduction occurred sequentially. A gradual decrease in these functional populations occurred when reduction reactions stabilized, suggesting that these functional populations could play an important role in both active U(VI) reduction and maintenance of the stability of reduced U(IV). These results suggest that addition of electron donors stimulated the microbial community to create biogeochemical conditions favorable to U(VI) reduction and prevent the reduced U(IV) from reoxidation and that functional FeRB, SRB, and NRB populations within this system played key roles in this process.

54 ENVIRONMENTAL SCIENCES↗

Dynamics of microbial community composition and function during in-situ bioremediation of a uranium-contaminated aquifer

A pilot-scale system was established to examine the feasibility of in situ U(VI) immobilization at a highly contaminated aquifer (U.S. DOE Integrated Field Research Challenge site, Oak Ridge, TN). Ethanol was injected intermittently as an electron donor to stimulate microbial U(VI) reduction, and U(VI) concentrations fell to below the Environmental Protection Agency drinking water standard (0.03 mg liter{sup -1}). Microbial communities from three monitoring wells were examined during active U(VI) reduction and maintenance phases with GeoChip, a high-density, comprehensive functional gene array. The overall microbial community structure exhibited a considerable shift over the remediation phases examined. GeoChip-based analysis revealed that Fe(III)-reducing bacterial (FeRB), nitrate-reducing bacterial (NRB), and sulfate-reducing bacterial (SRB) functional populations reached their highest levels during the active U(VI) reduction phase (days 137 to 370), in which denitrification and Fe(III) and sulfate reduction occurred sequentially. A gradual decrease in these functional populations occurred when reduction reactions stabilized, suggesting that these functional populations could play an important role in both active U(VI) reduction and maintenance of the stability of reduced U(IV). These results suggest that addition of electron donors stimulated the microbial community to create biogeochemical conditions favorable to U(VI) reduction and prevent the reduced U(IV) from reoxidation and that functional FeRB, SRB, and NRB populations within this system played key roles in this process.

54 ENVIRONMENTAL SCIENCES↗

Ultrafast dynamics of 2-thiouracil investigated by time-resolved Auger spectroscopy

In this paper, we present time-resolved ultraviolet-pump x-ray probe Auger spectra of 2-thiouracil. An ultraviolet induced shift towards higher kinetic energies is observed in the sulfur 2p Auger decay. The difference Auger spectra of pumped and unpumped molecules exhibit ultrafast dynamics in the shift amplitude, in which three phases can be recognized. In the first 100 fs, a shift towards higher kinetic energies is observed, followed by a 400 fs shift back to lower kinetic energies and a 1 ps shift again to higher kinetic energies. We use a simple Coulomb-model, aided by quantum chemical calculations of potential energy states, to deduce a C-S bond expansion within the first 100 fs. The bond elongation triggers internal conversion from the photoexcited S 2 to the S 1 state. Based on timescales, the subsequent dynamics can be interpreted in terms of S 1 nuclear relaxation and S 1 -triplet internal conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Creation of an Enhanced Geothermal System through Hydraulic and Thermal Stimulation

This report describes a 10-year DOE-funded project to design, characterize and create an Engineered Geothermal System (EGS) through a combination of hydraulic, thermal and chemical stimulation techniques. Volume 1 describes a four-year Phase 1 campaign, which focused on the east compartment of the Coso geothermal field. It includes a description of the geomechanical, geophysical, hydraulic, and geochemical studies that were conducted to characterize the reservoir in anticipation of the hydraulic stimulation experiment. Phase 1 ended prematurely when the drill bit intersected a very permeable fault zone during the redrilling of target stimulation well 34-9RD2. A hydraulic stimulation was inadvertently achieved, however, since the flow of drill mud from the well into the formation created an earthquake swarm near the wellbore that was recorded, located, analyzed and interpreted by project seismologists. Upon completion of Phase 1, the project shifted focus to a new target well, which was located within the southwest compartment of the Coso geothermal field. Volume 2 describes the Phase 2 studies on the geomechanical, geophysical, hydraulic, and geochemical aspects of the reservoir in and around target-stimulation well 46A-19RD, which is the deepest and hottest well ever drilled at Coso. Its total measured depth exceeding 12,000 ft. It spite of its great depth, this well is largely impermeable below a depth of about 9,000 ft, thus providing an excellent target for stimulation. In order to prepare 46A-19RD for stimulation, however, it was necessary to pull the slotted liner. This proved to be unachievable under the budget allocated by the Coso Operating Company partners, and this aspect of the project was abandoned, ending the program at Coso. The program then shifted to the EGS project at Desert Peak, which had a goal similar to the one at Coso of creating an EGS on the periphery of an existing geothermal reservoir. Volume 3 describes the activities that the Coso team contributed to the Desert Peak project, focusing largely on a geomechanical investigation of the Desert Peak reservoir, tracer testing between injectors 21-2 and 22-22 and the field's main producers, and the chemical stimulation of target well 27-15.

15 GEOTHERMAL ENERGY↗

Creation of an Enhanced Geothermal System through Hydraulic and Thermal Stimulation

This report describes a 10-year DOE-funded project to design, characterize and create an Engineered Geothermal System (EGS) through a combination of hydraulic, thermal and chemical stimulation techniques. Volume 1 describes a four-year Phase 1 campaign, which focused on the east compartment of the Coso geothermal field. It includes a description of the geomechanical, geophysical, hydraulic, and geochemical studies that were conducted to characterize the reservoir in anticipation of the hydraulic stimulation experiment. Phase 1 ended prematurely when the drill bit intersected a very permeable fault zone during the redrilling of target stimulation well 34-9RD2. A hydraulic stimulation was inadvertently achieved, however, since the flow of drill mud from the well into the formation created an earthquake swarm near the wellbore that was recorded, located, analyzed and interpreted by project seismologists. Upon completion of Phase 1, the project shifted focus to a new target well, which was located within the southwest compartment of the Coso geothermal field. Volume 2 describes the Phase 2 studies on the geomechanical, geophysical, hydraulic, and geochemical aspects of the reservoir in and around target-stimulation well 46A-19RD, which is the deepest and hottest well ever drilled at Coso. Its total measured depth exceeding 12,000 ft. It spite of its great depth, this well is largely impermeable below a depth of about 9,000 ft, thus providing an excellent target for stimulation. In order to prepare 46A-19RD for stimulation, however, it was necessary to pull the slotted liner. This proved to be unachievable under the budget allocated by the Coso Operating Company partners, and this aspect of the project was abandoned, ending the program at Coso. The program then shifted to the EGS project at Desert Peak, which had a goal similar to the one at Coso of creating an EGS on the periphery of an existing geothermal reservoir. Volume 3 describes the activities that the Coso team contributed to the Desert Peak project, focusing largely on a geomechanical investigation of the Desert Peak reservoir, tracer testing between injectors 21-2 and 22-22 and the field's main producers, and the chemical stimulation of target well 27-15.

15 GEOTHERMAL ENERGY↗

Asymmetric Fraunhofer spectra in a topological insulator-based Josephson junction

Josephson junctions with topological insulators as their weak link (S–TI–S junctions) are predicted to host Majorana fermions, which are key to creating qubits for topologically protected quantum computing. But the details of the S–TI–S current-phase relation and its interplay with magnetic fields are not well understood. We fabricate a Bi 2 Se 3 junction with NbTi leads and measure the Fraunhofer patterns of the junction with applied in-plane fields. We observe that asymmetric Fraunhofer patterns appear in the resistance maps of B z vs B x,y , with aperiodic node spacings. These asymmetric patterns appear even at zero parallel field and for temperatures up to 1 K. The anomalous features are compared to asymmetric Fraunhofer patterns expected for finite Cooper pair momentum shifts as well as geometric effects. We show that the geometric effects can dominate, independent of in-plane field magnitude. Furthermore, these results are important for differentiating geometrical phase shifts from those caused by Cooper pair momentum shifting, Majorana mode signatures, or other unconventional superconducting behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solid solubility of Yb{sub 2}Si{sub 2}O{sub 7} in {beta}-, {gamma}- and {delta}-Y{sub 2}Si{sub 2}O{sub 7}

This paper examines the structural changes with temperature and composition in the Yb{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} system; members of this system are expected to form in the intergranular region of Si{sub 3}N{sub 4} and SiC structural ceramics when sintered with the aid of Yb{sub 2}O{sub 3} and Y{sub 2}O{sub 3} mixtures. A set of different compositions have been synthesised using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1650 deg. C during different times. Isotherms at 1300 and 1600 deg. C have been analysed in detail to evaluate the solid solubility of Yb{sub 2}Si{sub 2}O{sub 7} in {beta}-Y{sub 2}Si{sub 2}O{sub 7} and {gamma}-Y{sub 2}Si{sub 2}O{sub 7}. Although Yb{sub 2}Si{sub 2}O{sub 7} shows a unique stable polymorph ({beta}), Yb{sup 3+} is able to replace Y{sup 3+} in {gamma}-Y{sub 2}Si{sub 2}O{sub 7} and {delta}-Y{sub 2}Si{sub 2}O{sub 7} at high temperatures and low Yb contents. IR results confirm the total solid solubility in the system and suggest a constant SiOSi angle of 180 deg. in the Si{sub 2}O{sub 7} unit across the system. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the {beta}-RE{sub 2}Si{sub 2}O{sub 7} polymorph, with {gamma}-RE{sub 2}Si{sub 2}O{sub 7} and {delta}-RE{sub 2}Si{sub 2}O{sub 7} showing reduced stability fields. The diagram is in accordance with Felsche's diagram if average ionic radii are assumed for the members of the solid solution at any temperature, as long as the {beta}-{gamma} phase boundary is slightly shifted towards higher radii. - Graphical abstract: Polymorphism, as a function of average radii, in the systems Yb{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} (dotted symbols), Lu{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} (solid symbols) and Sc{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} (open symbols) compared to phase boundaries of Felsche for pure rare earth disilicates. Circles: {beta}-RE{sub 2}Si{sub 2}O{sub 7}. Squares: {gamma}-RE{sub 2}Si{sub 2}O{sub 7}. Triangles: {delta}-RE{sub 2}Si{sub 2}O{sub 7}. Highlights: > {beta}-Yb{sub 2}Si{sub 2}O{sub 7} and {beta}-Y{sub 2}Si{sub 2}O{sub 7} form a complete solid solution at 1300 deg. C. > Yb(III) replaces Y in {gamma}- and {delta}-RE{sub 2}Si{sub 2}O{sub 7}, at low Yb contents and high temperatures. > Phase diagram of the Yb{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} system is dominated by the {beta}-RE{sub 2}Si{sub 2}O{sub 7} phase. > {gamma}- and {delta}-phases show very reduced stability fields. > {beta}-{gamma} phase boundary in Felsche's diagram should be slightly shifted towards higher radii.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of boron on the microstructural and mechanical properties of Ni{sub 53.5}Mn{sub 26.0}Ga{sub 20.5} shape memory alloy

Boron addition to Ni{sub 53.5}Mn{sub 26.0}Ga{sub 20.5} alloy is found to modify the microstructure and mechanical properties substantially. Studies on (Ni{sub 53.5}Mn{sub 26.0}Ga{sub 20.5})B{sub x} alloys reveal that boron addition causes grain refinement which led to an increase in compressive strength in x=0.5 alloy which also retained multimode twinning. Substantial second phase segregation rich in Ni was seen at grain boundaries, the extent of which increased with boron content. This led to a compositional shift in the matrix phase which resulted in a reduction in the martensitic transformation temperature and which in turn caused an easy deformation at low stresses and suppression of multimode twinning in x=1.0 alloy.

36 MATERIALS SCIENCE↗

Extraction of Pairs of Harmonics from Trigonometric Polynomials by Phase-Amplitude Operators

We propose a method for extracting the sums of two harmonics from trigonometric polynomials T{sub n}(t) by the method of amplitude-phase transformations. Such transformations send polynomials T{sub n}(t) to similar polynomials by two simplest operations: multiplication by a real constant X and shift by a real phase λ, i.e., T{sub n}(t) → X ・ T{sub n}(t − λ). The harmonics are extracted by adding similar polynomials.

97 MATHEMATICS AND COMPUTING↗

HELIOSEISMIC INVESTIGATION OF EMERGING MAGNETIC FLUX IN THE SOLAR CONVECTION ZONE

Helioseismology is capable of detecting signatures of emerging sunspot regions in the solar interior before they appear at the surface. Here we present measurements that show the rising motion of the acoustic travel-time perturbation signatures in the deep convection zone, and study the possible physical origin of these signatures using observational and numerical simulation data. Our results show that the detected signatures first appear at deeper layers and then rise, with velocities of up to 1 km s{sup –1}, to shallower regions. We find evidences that these signatures may not be caused by subsurface flows or wave-speed perturbations, but are associated with acoustic power variations and frequency shifts of the cross-covariance function measured in the emerging-flux region. We also confirm with the use of numerical simulation data that phase travel-time shifts can be associated with frequency shifts related to acoustic power variations. The results of this work reveal the rising motion of magnetic flux in the deep convection zone and explain the large amplitude of the detected perturbation signatures.

79 ASTRONOMY AND ASTROPHYSICS↗

Lithium's low-temperature phase transitions: Insights into quantum lattice dynamics and superconductivity

The large lattice dynamics of lithium, driven by its low atomic mass, results in energetically similar structures and significant isotope effects under pressure, posing challenges to current theoretical models. Above 20 GPa and at low temperatures, lithium's electronic properties deviate from simple metallic behavior, with superconductivity emerging in a complex, pressure-dependent manner, alongside an unusual isotope effect. The structural phases of 7 Li reported under these conditions are inconsistent across studies, and the structures of 6 Li remain unexamined. These gaps limit our understanding of the effects of pressure on lithium's electronic properties and the role of quantum lattice effects on its structural behavior under pressure. Here, we integrate experimental and theoretical approaches to investigate the low-temperature structural phase boundaries in lithium isotopes. We map the structural phase diagram of 7 Li from 5 to 55 GPa and 15–75 K, identifying the sequence fcc → ℎ⁡R⁢1 → cI16. A pronounced isotope effect is observed, with 6 Li shifting the fcc → ℎ⁡R⁢1 phase boundary to lower pressures at 15 K. Density functional theory calculations further clarify how these structural changes affect superconducting properties, particularly emphasizing the role of the fcc → ℎ⁡R⁢1 transition in lithium's superconductivity. Furthermore, our findings offer insights into the unique behavior of lithium isotopes under pressure.

36 MATERIALS SCIENCE↗

Mechanically-induced disorder in CaFe 2 As 2 : A 57 Fe Mössbauer study

57 Fe Mössbauer spectroscopy was used to perform a microscopic study on the extremely pressure and strain sensitive compound, CaFe 2 As 2 , with different degrees of strain introduced by grinding and annealing. At the base temperature, in the antiferromagnetic/orthorhombic phase, compared to a sharp sextet Mössbauer spectrum of single crystal CaFe 2 As 2 , which is taken as an un-strained sample, an obviously broadened sextet and an extra doublet were observed for ground CaFe 2 As 2 powders with different degrees of strain. The Mössbauer results suggest that the magnetic phase transition of CaFe 2 As 2 can be inhomogeneously suppressed by the grinding induced strain to such an extent that the antiferromagnetic order in parts of the grains forming the powdered sample remain absent all the way down to 4.6 K. However, strain has almost no effect on the temperature dependent hyperfine magnetic field in the grains with magnetic order. Additional electronic and asymmetry information was obtained from the isomer shift and quadrupole splitting. Similar isomer shift values in the magnetic phase for samples with different degrees of strain, indicate that the stain does not bring any significant variation of the electronic density at 57 Fe nucleus position. As a result, the absolute values of quadrupole shift in the magnetic phase decrease and approach zero with increasing degrees of strain, indicating that the strain reduces the average lattice asymmetry at Fe atom position.

36 MATERIALS SCIENCE↗

Electrical properties of lanthanum doped barium titanate ceramics

Pure and lanthanum doped barium titanate (BT) ceramics were prepared by sintering pellets at 1300 deg. C for 8 h, obtained from nanopowders synthesized by the polymeric precursor method. XRD results showed formation of a tetragonal structure. The presence of dopants changed the tetragonal structure to pseudo-cubic. The polygonal grain size was reduced up to 300 nm with addition of lanthanum as a donor dopant. Determined dielectric properties revealed that lanthanum modified BT ceramics possessed a diffused ferroelectric character in comparison with pure BT that is a classical ferroelectric material. In doped BT phase transition temperatures were shifted to lower temperatures and dielectric constant values were much higher than in pure BT. A modified Currie Weiss law was used to explore the connection between the doping level and degree of diffuseness of phase transitions. Impedance spectroscopy measurements were carried out at different temperatures in order to investigate electrical resistivity of materials and appearance of a PTCR effect. - Highlights: {yields} Pure and lanthanum doped BaTiO{sub 3} were prepared by polymeric precursors method. {yields} Change of structure from tetragonal to pseudo-cubic. {yields} Lanthanum as a donor dopant influenced on change of ferro-para phase transition. {yields} The diffuseness factor indicated the formation of diffuse ferroelectric material. {yields} Lanthanum affected on PTCR effect appearance in BT ceramics.

36 MATERIALS SCIENCE↗