Search NASA⌕ Search

SEARCH · Search NASA

Results for “Precursor analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

SEARCH FOR MUON NEUTRINOS FROM GAMMA-RAY BURSTS WITH THE IceCube NEUTRINO TELESCOPE

We present the results of searches for high-energy muon neutrinos from 41 gamma-ray bursts (GRBs) in the northern sky with the IceCube detector in its 22 string configuration active in 2007/2008. The searches cover both the prompt and a possible precursor emission as well as a model-independent, wide time window of -1 hr to +3 hr around each GRB. In contrast to previous searches with a large GRB population, we do not utilize a standard Waxman-Bahcall GRB flux for the prompt emission but calculate individual neutrino spectra for all 41 GRBs from the burst parameters measured by satellites. For all of the three time windows, the best estimate for the number of signal events is zero. Therefore, we place 90% CL upper limits on the fluence from the prompt phase of 3.7 x 10{sup -3} erg cm{sup -2} (72 TeV-6.5 PeV) and on the fluence from the precursor phase of 2.3 x 10{sup -3} erg cm{sup -2} (2.2-55 TeV), where the quoted energy ranges contain 90% of the expected signal events in the detector. The 90% CL upper limit for the wide time window is 2.7 x 10{sup -3} erg cm{sup -2} (3 TeV-2.8 PeV) assuming an E {sup -2} flux.

79 ASTRONOMY AND ASTROPHYSICS↗

Long-term monitoring of ULF electromagnetic fields at Parkfield, CA

Electric and magnetic fields in the (10{sup -4}-1.0) Hz band were monitored at two sites adjacent to the San Andreas Fault near Parkfield and Hollister, California from 1995 to present. A data window [2002-2005], enclosing the September 28, 2004 M6 Parkfield earthquake, was analyzed to determine if anomalous electric or magnetic fields, or changes in ground conductivity, occurred before the earthquake. The data were edited, removing intervals of instrument malfunction leaving 875 days in the four-year period. Frequent, spike-like disturbances were common, but were not more frequent around the time of the earthquake; these were removed before subsequent processing. Signal to noise amplitude spectra, estimated via magnetotelluric processing showed the behavior of the ULF fields to be remarkably constant over the period of analysis. These first-order plots make clear that most of the recorded energy is coherent over the spatial extent of the array. Three main statistical techniques were employed to separate local anomalous electrical or magnetic fields from the dominant coherent natural fields: transfer function estimates between components at each site were employed to subtract the dominant field, and look deeper at the 'residual' fields; the data were decomposed into principal components to identify the dominant coherent array modes; and the technique of canonical coherences was employed to distinguish anomalous fields which are spatially broad from anomalies which occur at a single site only, and furthermore to distinguish anomalies which are present in both the electric and magnetic fields from those which are present in only one field type. Standard remote reference apparent resistivity estimates were generated daily at Parkfield. A significant seasonal component of variability was observed suggesting local distortion due to variations in near surface resistance. In all cases, high levels of sensitivity to subtle electromagnetic effects were demonstrated, but no effects which can be reasonably characterized as precursors to the Parkfield earthquake were found.

54 ENVIRONMENTAL SCIENCES↗

Prediction of curing kinetics of resorcinol‐added resole phenolic resins using differential scanning calorimetry for the fabrication of carbon/carbon composites

Phenolic resins are commonly used as carbon precursors for the fabrication of carbon/carbon composites due to their high carbon yield and aromatic nature. To decrease curing times, acid catalysts are generally used, but the addition of resorcinol was found to have a similar effect while being incorporated into the resin matrix with no contamination or corrosion issues. In this work, the curing kinetics of pure, 10, 20, and 30 wt% resorcinol-added phenolic resins were investigated through differential scanning calorimetry. Heating rates of 0.5, 1, 2.5, and 5°C min -1 were used with several curing models to predict isothermal curing. Averaged mean absolute error (MAE) for the isoconversional mathematical approaches namely Kissinger–Akahira–Sunose (MAE = 12.9 min), Flynn–Wall–Ozawa (15.8 min), and Vyazovkin (14 min) show that these methods provide the best predictions, attributed to their adoption of an activation energy that depends on the extent of cure (E a (α)). The Kissinger method (MAE = 36 min), which depends only on peak temperature with a constant activation energy assumption, and the data noise sensitive Friedman model (MAE = 1144.7 min) provide the least accurate results. Thermogravimetric analysis revealed that resorcinol decreases the curing times by up to 71% without lowering carbon yield.

36 MATERIALS SCIENCE↗

Feedstock and Catalyst Impact on Bio-Oil Production and FCC Co-Processing to Fuels

NREL's thermochemical biomass conversion research is focused on ex-situ upgrading of biomass fast-pyrolysis (FP) vapors as an efficient route to completely biogenic pyrolysis-based fuel precursors, fuels, and value-added chemicals depending on catalyst and process conditions. A near term pathway being developed uses these liquids for co-processing with petroleum feedstocks to assess biogenic carbon incorporation in hydrocarbon fuel feedstocks for potential refinery use. In this work, the impact of feedstock and catalyst on catalytic fast pyrolysis oil (CFPO) composition was determined with the oils then assessed for biogenic fuel production via FCC (fluidized catalytic cracking) co-processing. Biomass vapors were generated via fast pyrolysis with destabilizing vapor components (char, inorganics, tar aerosols) removed by hot gas filtration to produce clean vapors more responsive to catalytic upgrading. A Davison Circulating Riser (DCR), a petroleum industry standard for fluidized catalytic cracking (FCC) catalyst evaluation, was coupled to a custom pyrolyzer system designed to produce consistent-composition pyrolysis vapors as feed to the DCR. Pyrolysis vapors, derived from pure hardwood and softwood, were upgraded using commercially available modified zeolite-based catalysts to produce CFPOs. These upgraded oils were analyzed via 31P and 13C NMR spectroscopy, GCxGC-TOF/MS, carbonyl and ultimate analysis (CHNO), and simulated distillation (SIMDIS) to assess both oil chemistry and distillation behavior as they relate to catalyst and feedstock type for producing fungible hydrocarbon product liquids. These exploratory vapor-phase-upgrading results demonstrated the feasibility of producing refinery-compatible hydrocarbon fuel intermediates entirely from biomass-derived fast-pyrolysis vapors using an industry-accepted DCR system for catalytic upgrading. The FCC co-processing results demonstrated the feasibility of using CFPOs with VGO feeds in FCC refinery operations to produce biogenic carbon containing fuels.

biogenic carbon↗

Structural Biology of Aromatic Amino Acid Biosynthesis in Plants: The Prephenate Branch Point

Plants are chemists that have spent the last 425 million years evolving unique secondary metabolites to communicate with their surroundings, defend themselves against pathogens, insects, and herbivores, and grow and develop. Many secondary metabolites are biosynthesized from the aromatic amino acids tryptophan, tyrosine, and phenylalanine, and the shikimate and aromatic amino acid biosynthetic pathways link primary and specialized metabolism. Prephenate aminotransferase (PAT) is a key enzyme in aromatic amino acid biosynthesis because its product, arogenate, is the immediate precursor for both tyrosine and phenylalanine. Interestingly, the enzyme has a dual role in metabolism and can also function as a classical aspartate aminotransferase. AtPAT is pyridoxal 5′‐phosphate‐dependent (PLP) enzyme belonging to the AAT‐like aspartate aminotransferase domain and follows a ping‐pong bi‐bi reaction mechanism through Schiff‐base formation to a catalytic K306 in the active site. Each subunit of the AtPAT dimer consists of a large domain and a small domain that belong to the α‐β class of protein fold. Despite the structural similarities to aspartate aminotransferases, the molecular basis of prephenate binding specificity remains elusive. To gain an understanding of the enzyme's chemistry and substrate selectivity, a 2.5 Å x‐ray structure of PAT from the model plant Arabidopsis thaliana (thale cress) was solved in complex with the PLP. To our knowledge, this is the first structure of a bona fide prephenate aminotransferase. Amino acid sequence comparisons of all known functional PATs shows that T84 and K169 are highly conserved; however, some enzymes annotated as PAT display sequence variations at these positions. Biochemical analysis of T84V, K169V, and T84V/K169V PAT reveals that the double mutant gained tyrosine aminotransferase activity and was able to convert 4‐hydroxyphenylpyruvate to tyrosine. T84 is on the opposite side of the active site pocket, while the amine backbone of K169 hydrogen bonds to PLP. We hypothesize that Thr84 and Lys169 are important for substrate recognition in the active site and will use these mutants in future crystallographic experiments. Overall, our structural studies will assist in understanding the role of this bi‐functional enzyme in the context of aromatic amino acid biosynthesis in plants. Support or Funding Information This material is based upon work supported by the National Science Foundation Graduate Research Fellowship under Grant No. DGE‐1143954. Any opinion, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation. Results shown in this report are derived from work performed at Argonne National Laboratory, Structural Biology Center at the Advanced Photon Source. Argonne is operated by UChicago Argonne, LLC, for the U.S. Department of Energy, Office of Biological and Environmental Research under contract DE‐AC02‐06CH11357.

Holland, Cynthia K.↗

Electrical, thermal and electrochemical properties of disordered carbon prepared from palygorskite and cane molasses

We have synthesized and electrochemically tested a carbon sample that was suitable as anode for lithium secondary battery. The synthesis was based on the use of the palygorskite clay as template and sugar cane molasses as carbon source. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, Brunauer–Emmett–Teller (BET) measurements and High Resolution Transmission Electron Microscope (HRTEM) analysis showed that the nanometric carbon material has a highly disordered graphene-like wrinkled structure and large specific surface area (467 m{sup 2} g{sup −1}). The compositional characterization revealed a 14% of heteroatoms-containing groups (O, H, N, S) doping the as-prepared carbon. Thermophysical measurements revealed the good thermal stability and an acceptable thermal diffusivity (9·10{sup −7} m{sup 2} s{sup −1}) and conductivity (1.1 W m{sup −1} K{sup −1}) of this carbon. The electrical properties showed an electronic conductivity of hole-like carriers of approximately one S/cm in a 173–293 K range. The testing of this material as anodes in a secondary lithium battery displayed a high specific capacity and excellent performance in terms of number of cycles. A high reversible capacity of 356 mA h g{sup −1} was reached. - Graphical abstract: TEM image and electrochemistry behavior of a new graphene oxide-like carbon. - Highlights: • A high disordered graphene oxide-like conducting carbon is reported. • The synthesis was based on palygorskite and sugar cane molasses as precursors. • The disordered conducting carbon is composed of doped- graphene heterogeneous domains. • This material combines a large specific surface area and high electric conductivity. • The thermophysical and electrochemical properties of this material reveal adequate behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct functionalization of C-H bonds by electrophilic anions

Bond formation between two of the most inert molecules, alkanes and [B12X12]2- (X = Cl, Br), is performed in a two step process. Fragmentation of [B12X12]2- in the gas phase generates highly reactive [B12X11]- ions which spontaneously react with alkanes. The reaction mechanism was investigated using tandem mass spectrometry and gas-phase vibrational spectroscopy combined with electronic structure calculations. This effort revealed the unprecedented and counterintuitive electrophilic substitution of a proton in an alkane by a negatively charged ion resulting in a B-C bond formation. The product is a dianionic [B12X11CnH2n+1]2- species, in which H+ is electrostatically bound to the dianion. High flux ion soft-landing was performed to co-deposit [B12X11]- and complex organic molecules (phthalates) in thin layers on surfaces. Molecular structure analysis of the product films revealed that C-H functionalization by [B12X11]- occured in the presence of other more reactive functional groups. This observation demonstrates the utility of highly reactive fragment ions for defined bond formation processes and may pave the way to the use of gas phase ion chemistry for chemical synthesis in the condensed phase.

Warneke, Jonas↗

Genome-Wide Association Study for Identifying Loci that Affect Fillet Yield, Carcass, and Body Weight Traits in Rainbow Trout (Oncorhynchus mykiss)

Fillet yield (FY, %) is an economically-important trait in rainbow trout aquaculture that affects production efficiency. Despite that, FY has received little attention in breeding programs because it is difficult to measure on a large number of fish and cannot be directly measured on breeding candidates. The recent development of a high-density SNP array for rainbow trout has provided the needed tool for studying the underlying genetic architecture of this trait. A genome-wide association study (GWAS) was conducted for FY, body weight at 10 (BW10) and 13 (BW13) months post-hatching, head-off carcass weight (CAR), and fillet weight (FW) in a pedigreed rainbow trout population selectively bred for improved growth performance. The GWAS analysis was performed using the weighted single-step GBLUP method (wssGWAS). Phenotypic records of 1447 fish (1.5 kg at harvest) from 299 full-sib families in three successive generations, of which 875 fish from 196 full-sib families were genotyped, were used in the GWAS analysis. A total of 38,107 polymorphic SNPs were analyzed in a univariate model with hatch year and harvest group as fixed effects, harvest weight as a continuous covariate, and animal and common environment as random effects. A new linkage map was developed to create windows of 20 adjacent SNPs for use in the GWAS. The two windows with largest effect for FY and FW were located on chromosome Omy9 and explained only 1.0–1.5% of genetic variance, thus suggesting a polygenic architecture affected by multiple loci with small effects in this population. One window on Omy5 explained 1.4 and 1.0% of the genetic variance for BW10 and BW13, respectively. Three windows located on Omy27, Omy17, and Omy9 (same window detected for FY) explained 1.7, 1.7, and 1.0%, respectively, of genetic variance for CAR. Among the detected 100 SNPs, 55% were located directly in genes (intron and exons). Nucleotide sequences of intragenic SNPs were blasted to the Mus musculus genome to create a putative gene network. The network suggests that differences in the ability to maintain a proliferative and renewable population of myogenic precursor cells may affect variation in growth and fillet yield in rainbow trout.

54 ENVIRONMENTAL SCIENCES↗

Forming a database to study reversed magnetic shear from the National Spherical Torus eXperiment using machine learning

Achieving a long-lived reversed magnetic shear (RMS) target plasma in the National Spherical Torus eXperiment Upgrade will require developing various sustainment scenarios. To help with the ongoing plasma control efforts, the development of a new analysis for the motional Stark effect (MSE) diagnostic using a machine learning algorithm, namely, MSE-ML, is described. MSE-ML will be used to identify patterns during RMS discharges, some of which suffer magnetohydrodynamic (MHD) events resulting in current redistribution and monotonic q-profiles. A database consisting of q and magnetic shear profiles is being constructed primarily based on the existing National Spherical Torus eXperiment data with equilibrium reconstructions constrained by the magnetic field pitch angle profile measured using the multi-channel MSE diagnostic. An unsupervised k-means clustering of the data is developed to study the RMS formation as a function of time. The initial clustering from the q-profiles shows significant differences in both amplitude and the duration of the RMS period. As a goal, the clustering results that detect and distinguish shots with substantial and sustained RMS are to be used as a preprocessing step in a supervised algorithm to identify the underlying conditions that lead to long-lasting improved confinement with RMS. Another aim of the MSE-ML study is to identify precursors of RMS-destroying MHD events in either derived data such as the q-profile or directly measured data such as the magnetic field pitch angle profile.

Uzun-Kaymak, I. U. (ORCID:0000000276251493)↗

Direct Air Capture Using Trapped Small Amines in Hierarchical Nanoporous Capsules on Porous Electrospun Fibers (Final Technical Report)

This report summarizes the carbon capture research and development conducted by The State University of New York at Buffalo (UB) and GTI Energy (GTI) for award “DE-FE0031969: Direct Air Capture Using Trapped Small Amines in Hierarchical Nanoporous Capsules on Porous Electrospun Fibers” sponsored by the U.S. Department of Energy (DOE). The objective of this project is to develop an innovative sorbent structure of trapped small amines in HNC embedded in PEF for DAC. This involves tailoring both sorbent and PEF materials to achieve a compact system for DAC with high capacity for CO 2 at concentrations typically available in air and at near ambient conditions. An innovative sorbent structure of trapped small amines in hierarchical nanoporous capsules (HNC) embedded in porous electrospun fibers (PEF) was developed for direct air capture (DAC). This involves tailoring both sorbent and PEF materials to achieve a compact system for DAC with high capacity for CO 2 at concentrations typically available in air and at near ambient conditions. An interfacial polymerization process was developed, which utilized loaded amines inside mesoporous silica and trimesoyl chloride (TMC) dissolved in organic solvents as the precursors, to generate a polyamide (PA) coating layer on mesoporous silica and thus trap amines. Reaction conditions, including TMC concentration, organic solvents, reaction time, etc., for interfacial polymerization were optimized to effectively trap loaded amines, and cyclic heating-cooling operation was conducted to evaluate the coating quality. Larger pore volume mesoporous silica was also synthesized to increase amine loading and thus increase CO 2 capacity. The optimized sorbent material exhibited CO 2 capacity as high as 4.88 mmol/g under humid DAC conditions and negligible loss (<1%) during 10 cyclic heating-cooling operations. The optimized PA-coated sorbent also showed fast adsorption and desorption kinetics, with <20% t1/2 increase compared to uncoated sorbent. PEF fabrication conditions, including organic solvents for dissolving core and shell polymers, voltage, distance from the nozzle to the collection panel, etc. were adjusted to better incorporate HNC. After incorporating the optimized sorbent material into PEF, the structured sorbent had a CO 2 capacity of approximately 4.0 mmol/g under humid DAC conditions, with capacity loss of 0.17% per cycle and t1/2 increase less than 10%. A techno-economic analysis (TEA) for the process design for a DAC system based on our developed sorbent structure of trapped small amines in HNC embedded in PEF was conducted. The process design included process description and major equipment sizing and energy and mass balances in addition to scale-up research results and estimated capture cost. Aspen Adsorption Simulator was used to fit the experimentally measured breakthrough curves and extract equilibrium and kinetic data of the optimized sorbent. Our results indicated that for a DAC plant with CO 2 productivity of 3,000 tonne/year, the levelized cost of CO 2 capture was $\$$612/tonne, with the largest contribution of 44.33% from the fixed operation cost. Increasing CO 2 productivity, while maintaining similar fixed operation cost, is expected to significantly reduce the CO 2 capture cost. A sensitivity study was also conducted to understand the influence of total plant cost, sorbent cost, CO 2 concentration in the feed, sorbent mat lifetime, sorbent regeneration electricity, and adsorption blower pressure drop on the levelized cost of CO 2 capture, revealing a capture cost range of $\$$520-870/tonne.

36 MATERIALS SCIENCE↗

High-Performance, Superparamagnetic, Nanoparticle-Based Heavy Metal Sorbents for Removal of Contaminants from Natural Waters

We describe the synthesis and characterization of superparamagnetic iron oxide nanoparticle based heavy metal sorbents with various surface chemistries that demonstrate an excellent affinity for the separation of heavy metals in contaminated water systems (i.e. spiked Columbia river water). The magnetic nanoparticle sorbents are prepared from an easy to synthesize iron oxide precursor, followed by a simple, one-step ligand exchange technique to introduce the organic surface functionality of interest chosen to target either specific or broader classes of heavy metals. Functionalized superparamagnetic nanoparticles are excellent sorbent materials for the extraction of heavy metal contaminants from environmental and clinical samples since they are easily removed from the media once bound to the contaminant by simply applying a magnetic field. These engineered magnetic nanoparticle sorbents have an inherently high active surface area (often > 100 m2/g), allowing for increased binding capacity. To demonstrate the potential sorbent performance of each of the surface modified magnetic nanoparticles, river water was spiked with Hg, Pb, Cd, Ag, Co, Cu, and Tl and exposed to low concentrations of the functionalized nanoparticles. The samples were analyzed to determine the metal content before and after exposure to the magnetic nanoparticle sorbents. In almost all cases reported here the nanoparticles were found to be superior to commercially available sorbents binding a wide range of different heavy metals with extremely high affinity. Detailed characterization of the functionalized magnetic nanoparticle sorbents including FT-IR, BET surface analysis, TGA, XPS and VSM as well as the heavy metal removal experiments are presented.

54 ENVIRONMENTAL SCIENCES↗

Integrating terrestrial and aquatic processes toward watershed scale modeling of dissolved organic carbon fluxes

Dissolved organic carbon (DOC) is not only a critical component of global and regional carbon budgets, but also an important precursor for carcinogenic disinfection byproducts (DBP) generated during drinking water disinfection process. The lack of process based watershed scale model for carbon cycling has been a limiting factor impeding effective watershed management to control DOC fluxes to source waters. Here, we integrated terrestrial and aquatic carbon processes into the widely tested Soil and Water Assessment Tool (SWAT) watershed model to enable watershed-scale DOC modeling (referred to as SWAT-DOC hereafter). The modifications to SWAT mainly fall into two groups: (1) DOC production in soils and its transport to aquatic environment by different hydrologic processes, and (2) riverine transformation of DOC and their interactions with particular organic carbon (POC), inorganic carbon and algae (floating and bottom). We tested the new SWAT-DOC model in the Cannonsville watershed, which is part of the New York City (NYC) water supply system, using long-term DOC load data (from 1998 to 2012) derived from 1399 DOC samplings. The calibration and verification results indicate that SWAT-DOC achieved satisfactory performance for both streamflow and DOC at daily and monthly temporal scales. The parameter sensitivity analysis indicates that DOC loads in the Cannonsville watershed are controlled by the DOC production in soils and its transport in both terrestrial and aquatic environments. Further model uncertainty analysis indicates high uncertainties associated with peak DOC loads, which are attributed to underestimation of high streamflows. Therefore, future efforts to enhance SWAT-DOC to better represent runoff generation processes hold promise to further improve DOC load simulation. Overall, the wide use of SWAT and the satisfactory performance of SWAT-DOC make it a useful tool for DOC modeling and mitigation at the watershed scale.

Dissolved Organic Carbon, non-point source polluti↗

SAM Enhancements and Model Developments for Molten-Salt-Fueled Reactors

To support the development and utilization of the SAM code for molten-salt-fueled reactor (MSR) safety analysis and licensing, an effort was devoted to enhancing code capabilities and developing reference models for the MSR primary loop. A reference standard problem of a prototypical reactor design is foundational to NRC to verify the adequacy of computer codes and evaluation models for a specific reactor type. A thermo-fluid model of the Molten Salt Reactor Experiment (MSRE) has been developed. The MSRE primary loop model consists of a 2-D core region and external core components in 1-D or 0-D. Both the steady-state and a transient scenario are simulated. The porous medium model is utilized for both the molten salt fluid channels and the moderator matrix in the MSRE core. The use of the porous medium model for the MSRE core is verified with the higher-fidelity simulation results using 1-D representations of the fluid channels and 3-D modeling of core structures. To further enhance SAM multi-scale simulation capabilities for MSRs, a mass transport model is developed and implemented in SAM multi-dimension flow module for modeling of species transport such as delayed neutron precursors in MSRs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

High-Rate, Selective Electrosynthesis of Cyclohexanone Oxime via In Situ Generation and Release of Hydroxylamine on Bismuth

Oxime compounds are key industrial intermediates for nylon precursors and commodity chemicals. However, conventional routes rely on multistep reactions and hydroxylamine (NH 2 OH) salts, raising significant safety and sustainability concerns. Although electrosynthesis offers an alternative, oxime formation on d-block transition metals suffers from poor selectivity, as nitrogen oxyanion intermediates bind strongly to the surface and are readily over-reduced to ammonia. Here, we report morphology-controlled p-block bismuth rhombic dodecahedra (Bi RDs) that promote in situ NH 2 OH generation and its desorption into the electrolyte, enabling an electrochemical-chemical decoupled route for cyclohexanone oxime (CHO) synthesis. Bi RDs deliver nearly 100% Faradaic efficiency (FE) at −0.5 V vs. RHE and a yield of 1.4 mmol h –1 cm –2 at −0.9 V vs. RHE in an H-cell, while maintaining a CHO selectivity of nearly 100% at 100 mA cm –2 in a flow cell. Under identical conditions, d-block electrodes (Cu, Pd, Ag) show FE below 30%. Density functional theory calculations reveal that Bi 6p orbital-derived surface states weaken intermediate binding and facilitate NH 2 OH desorption, suppressing over-reduction. Kinetic analysis, post-addition trapping experiments, and in situ ATR-FTIR and Raman spectroscopy suggest the following reaction mechanism: NH 2 OH is selectively generated at the electrode surface, released as a freely diffusing intermediate, and undergoes homogeneous condensation with cyclohexanone in the bulk electrolyte, bypassing the surface-confined Langmuir–Hinshelwood pathway. These findings demonstrate that regulating intermediate desorption through p-block orbital chemistry provides a general strategy for achieving high selectivity in electro-organic nitrogen synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Factors influencing the microphysics and radiative properties of liquid-dominated Arctic clouds: insight from observations of aerosol and clouds during ISDAC

Aircraft measurements during the Indirect and Semi-Direct Aerosol Campaign (ISDAC) in April 2008 are used to investigate aerosol indirect effects in Arctic clouds. Two aerosol-cloud regimes are considered in this analysis: single-layer stratocumulus cloud with below-cloud aerosol concentrations (N{sub a}) below 300 cm{sup -3} on April 8 and April 26-27 (clean cases); and inhomogeneous layered cloud with N{sub a} > 500 cm{sup -3} below cloud base on April 19-20, concurrent with a biomass burning episode (polluted cases). Vertical profiles through cloud in each regime are used to determine average cloud microphysical and optical properties. Positive correlations between the cloud droplet effective radius (Re) and cloud optical depth ({tau}) are observed for both clean and polluted cases, which are characteristic of optically-thin, non-precipitating clouds. Average Re values for each case are {approx} 6.2 {mu}m, despite significantly higher droplet number concentrations (Nd) in the polluted cases. The apparent independence of Re and Nd simplifies the description of indirect effects, such that {tau} and the cloud albedo (A) can be described by relatively simple functions of the cloud liquid water path. Adiabatic cloud parcel model simulations show that the marked differences in Na between the regimes account largely for differences in droplet activation, but that the properties of precursor aerosol also play a role, particularly for polluted cases where competition for vapour amongst the more numerous particles limits activation to larger and/or more hygroscopic particles. The similarity of Re for clean and polluted cases is attributed to compensating droplet growth processes for different initial droplet size distributions.

09 BIOMASS FUELS↗

Review—Electrolytic Metal Atoms Enabled Manufacturing of Nanostructured Sensor Electrodes

Sensing materials play a key role in the successful implementation of electrochemical sensors, and nanotechnology has emerged as an important and rapidly growing field for stimulating the innovation of high-performance sensors. The fabrication, characterization, and evaluation of the nanostructured electrodes are therefore a focus of this field. Compared to a variety of dry and wet technologies which have been extensively developed for this purpose, electrochemical methods are typically convenient, highly effective, and potentially low-cost for the production of different nanostructures. This minireview is designed to introduce a unique electrochemical method - electrolytic metal-atom enabled manufacturing (EM 2 ) and its application in electrochemical sensors. The EM 2 technique employs electrolytic metal atoms generated from their corresponding salt precursor as a tool to nanostructure a wide range of substrate electrodes used in electrochemical sensors, based on a one-pot electrochemical deposition and dissolution of the metal atoms in the same electrolyte bath. Briefly, the metal atoms are electrodeposited on a substrate electrode during the cathode reduction, and they are selectively removed from the substrate during the subsequent anode oxidation. Because of the interactions between the electrolytic metal atoms and the substrate atoms, the repetitive electrodeposition and dissolution of the former on the substrate enable the nanostructuration of the substrate, particularly within its surface layers. The nanostructured electrodes have demonstrated very attractive performance for the determination of numerous analytes, such as high sensitivity and selectivity, high interference tolerance, and low detection limits. However, the EM 2 technique and the application of the resulting nanostructured electrodes in electrochemical sensors and beyond have still been very limitedly investigated. In order to bring the community from academic, industries, agencies, and customers together to develop the EM 2 technique and advance electrochemical sensor systems, this minireview will introduce the thermodynamic and kinetic fundamentals of this technique, the characterization of resulting nanostructures, the analysis of their electrochemical behavior, and the implementation of this technique for the development of advanced sensor electrodes. Finally, an outlook with a focus on further research areas is provided.

Jiang, Junhua (ORCID:0000000324379812)↗

FY18 Status Report: SNL Research into Stress Corrosion Cracking of SNF Interim Storage Canisters

This progress report describes work done in FY18 at Sandia National Laboratories (SNL) to assess the localized corrosion performance of container/cask materials used in the interim storage of spent nuclear fuel (SNF). The work focuses on stress corrosion cracking (SCC), the only mechanism by which a through-wall crack could potentially form in a canister outer wall over time intervals that are shorter than possible dry storage times. Work in FY18 continued several studies initiated in FY17 that are aimed at refining the understanding of the chemical and physical environment on canister surfaces, and evaluating the relationship between chemical and physical environment and the form and extent of corrosion that occurs. The SNL canister environment work focused on evaluating the stability of sea-salt deliquescent brines on the heated canister surface; an additional opportunity to analyze dusts sampled from an inservice spent nuclear fuel storage canister also arose. The SNL corrosion work focused predominantly on pitting corrosion, a necessary precursor for SCC, and process of pit-to-crack transition. SNL is collaborating with several university partners to investigate SCC crack growth experimentally, providing guidance for design and interpretation of experiments. The scope of these efforts targets near-marine Independent Spent Fuel Storage Installation environments which are generally considered to be most aggressive for pitting and SCC. Work to define the chemical and physical environment that could develop on storage canister surfaces in near-marine environments included experiments to evaluate the thermal stability of magnesium chloride brines, representative of the first brines to form when sea-salts deliquesce, with the specific goal of understanding and interpreting results of sea-salt and magnesium chloride corrosion experiments carried out under accelerated conditions. The experiments showed that magnesium chloride brines, and by extension, low RH sea-salt deliquescent brines, are not stable at elevated temperatures, losing chloride via degassing of HC1 and conversion to Mg-hydroxychlorides and carbonates. The experiments were carried out on an inert substrate to eliminate the effects of corrosion reactions, simulating brine stabilities in the absence of, or prior to, corrosion. Moreover, analysis of salts recovered from actively corroding metal samples shows that corrosion also supports or drives conversion of magnesium chloride or sea-salt brines to less deliquescent salts. This process has significant implications on corrosion, as the secondary phases are less deliquescent than magnesium chloride; the conversion reaction results in decreases in brine volume, and potentially results in brine dry-out. The deliquescence properties of these reaction products will be a topic of active research in FY19.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NRC Multiphysics Analysis Capability Deployment FY21: Part 3

This report details the progress and activities of Idaho National Laboratory (INL) on the Nuclear Regulatory Commission (NRC) project “Development and Modeling Support for Advanced Non-Light Water Reactors.” The deliverables completed for this report are: Deliverable 1c: the capability to model gas mixtures was added to Pronghorn. A test problem mimicking the conditions achieved in a depressurized loss of forced cooling (DLOFC) event was solved with both RELAP-5 and Pronghorn. Pronghorn employed a finite vol ume method with the Kurganov-Tadmor discretization. The comparison between the mass fraction spatial profiles computed with RELAP-5 and Pronghorn clearly shows the presence of numerical artifacts (i.e., overly diffusive behavior at low Mach numbers). We confirmed that the problem disappears at higher Mach numbers. We recommend future work on the implementation of a low Mach finite volume formulation to better treat low Mach number problems. Deliverable 2a: we demonstrated two approaches to model the radiation/conduction/natural convection heat transfer across a stagnant gas for the PBMR-400 design using Pronghorn. The first approach is based on the net radiation method, which relies on the computation of view factors with the Multiphysics Object-Oriented Simulation Environment (MOOSE) ray tracing capability. The second method is a traditional thermal resistance approach. The test problems include both 2D and 3D geometries. In all cases, the results show very good agreement during a DLOFC transient. This confirms that the faster thermal resistance method produces solutions that are equivalent to the net radiation method for this geometry. Deliverable 3d: we demonstrated the use of the advection kernel for the delayed neutron precursor equation in Griffin with a 2D MSFR model. The results appear physical but further verification is recommended. We also recommend the addition of conjugate heat transfer to compute the temperatures and model the thermomechanic behavior of the reflectors and other structures. Significant memory and performance issues were encountered in the 3D axisymmetric model. Future work is recommended in this area. Task 8g: this task allows multidimensional MOOSE applications to be coupled to system codes (RELAP-7 and SAM). We implemented a faster multiphysics iteration coupling algorithm, which provides an overall 6× acceleration of the 3D-1D coupling of the core multidi- mensional fluid flow solver and the 1D primary and secondary loop model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗