Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUPERFLUID MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

‘Granular Elasticity’ and the loss of elastic stability in granular materials

A recently proposed hyperelastic model for granular materials, called "granular elasticity", identifies a yield angle as a result of thermodynamic instability. GE gives yield angles that are smaller than those found in real materials; a generalization of the theory is considered here that includes dependence on the third strain invariant. This generalization proves unsuccessful, as it gives smaller, not larger, yield angles. Fully convex hyperelastic models are identified as a point for future investigation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scaling law analysis of paraffin thin films on different surfaces

The dynamics of paraffin deposit formation on different surfaces was analyzed based on scaling laws. Carbon-based films were deposited onto silicon (Si) and stainless steel substrates from methane (CH{sub 4}) gas using radio frequency plasma enhanced chemical vapor deposition. The different substrates were characterized with respect to their surface energy by contact angle measurements, surface roughness, and morphology. Paraffin thin films were obtained by the casting technique and were subsequently characterized by an atomic force microscope in noncontact mode. The results indicate that the morphology of paraffin deposits is strongly influenced by substrates used. Scaling laws analysis for coated substrates present two distinct dynamics: a local roughness exponent ({alpha}{sub local}) associated to short-range surface correlations and a global roughness exponent ({alpha}{sub global}) associated to long-range surface correlations. The local dynamics is described by the Wolf-Villain model, and a global dynamics is described by the Kardar-Parisi-Zhang model. A local correlation length (L{sub local}) defines the transition between the local and global dynamics with L{sub local} approximately 700 nm in accordance with the spacing of planes measured from atomic force micrographs. For uncoated substrates, the growth dynamics is related to Edwards-Wilkinson model.

36 MATERIALS SCIENCE↗

A promising concept for using near-surface measuring angles in angle-resolved x-ray photoelectron spectroscopy considering elastic scattering effects

The increasing number of applications of very thin films requires both reliable thin-layer and interface characterization. A powerful method for characterization in the nanometer thickness range is the angle-resolved x-ray photoelectron spectroscopy (ARXPS). This is a nondestructive depth-profiling method, which can provide elemental content as well as chemical information. Two of the drawbacks of ARXPS are, that it requires dedicated mathematical modeling and that, at least up until now, its use has been restricted away from near-surface angles. In this paper we present a method for the mathematical description of a few, hitherto unaccounted, measurement effects in order to improve the simulations of ARXPS data for complex surface structures. As an immediate application, we propose a simple algorithm to consider the effects of elastic scattering in the standard ARXPS data interpretation, which in principle would allow the use of the whole angular range for the analysis; thus leading to a significant increase in the usable information content from the measurements. The potential of this approach is demonstrated with model calculations for a few thin film examples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dual growth modes in ion bombarded Si surfaces

Morphological studies were done on Si (001) surfaces after rastering them with a 1 keV O{sub 2}{sup +} ion beam at an angle. The resulting mounded morphology was studied using atomic force microscopy (AFM) measurements. The roughness at different length scales were further extracted and quantified from AFM measurements using scaling analysis. Results indicate two growth regimes of the evolving surface which were evident from the power spectral density (PSD) and interface width analysis of the eroded surfaces. Initially the growth is unstable followed by a stable regime of the nanostructures evolved after about 35 minutes of erosion. Temporal studies done on these surfaces show the onset of shadowing at higher sputtering times thus indicating the breakdown of the growth model at these times.

36 MATERIALS SCIENCE↗

Invited Review Article: Physics and Monte Carlo techniques as relevant to cryogenic, phonon, and ionization readout of Cryogenic Dark Matter Search radiation detectors

This review discusses detector physics and Monte Carlo techniques for cryogenic, radiation detectors that utilize combined phonon and ionization readout. A general review of cryogenic phonon and charge transport is provided along with specific details of the Cryogenic Dark Matter Search detector instrumentation. In particular, this review covers quasidiffusive phonon transport, which includes phonon focusing, anharmonic decay, and isotope scattering. The interaction of phonons in the detector surface is discussed along with the downconversion of phonons in superconducting films. The charge transport physics include a mass tensor which results from the crystal band structure and is modeled with a Herring-Vogt transformation. Charge scattering processes involve the creation of Neganov-Luke phonons. Transition-edge-sensor (TES) simulations include a full electric circuit description and all thermal processes including Joule heating, cooling to the substrate, and thermal diffusion within the TES, the latter of which is necessary to model normal-superconducting phase separation. Relevant numerical constants are provided for these physical processes in germanium, silicon, aluminum, and tungsten. Random number sampling methods including inverse cumulative distribution function (CDF) and rejection techniques are reviewed. To improve the efficiency of charge transport modeling, an additional second order inverse CDF method is developed here along with an efficient barycentric coordinate sampling method of electric fields. Results are provided in a manner that is convenient for use in Monte Carlo and references are provided for validation of these models.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Percolation theory and quantum critical systems: A new description of the critical behavior in Ce(Ru{sub 0.24}Fe{sub 0.76}){sub 2}Ge{sub 2}

The onset of ordering in quantum critical systems is characterized by a competition between the Kondo shielding of magnetic moments and the ordering of these moments. We show how a distribution of Kondo shielding temperatures—resulting from chemical doping—leads to critical behavior whose main characteristics are given by percolation physics. With the aid of Monte Carlo computer simulations, we are able to infer the low temperature part of the distribution of shielding temperatures in heavily doped quantum critical Ce(Ru{sub 0.24}Fe{sub 0.76}){sub 2}Ge{sub 2}. Based on this distribution, we show that the ordering dynamics—such as the growth of the correlation length upon cooling—can be understood by the spawning of magnetic clusters. Our findings explain why the search for universal exponents in quantum critical systems has been unsuccessful: the underlying percolation network associated with the chemical doping of quantum critical systems has to be incorporated in the modeling of these quantum critical systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The self-assembly of particles with isotropic interactions: Using DNA coated colloids to create designer nanomaterials

Self-consistent field theory equations are presented that are suitable for use as a coarse-grained model for DNA coated colloids, polymer-grafted nanoparticles and other systems with approximately isotropic interactions. The equations are generalized for arbitrary numbers of chemically distinct colloids. The advantages and limitations of such a coarse-grained approach for DNA coated colloids are discussed, as are similarities with block copolymer self-assembly. In particular, preliminary results for three species self-assembly are presented that parallel results from a two dimensional ABC triblock copolymer phase. The possibility of incorporating crystallization, dynamics, inverse statistical mechanics and multiscale modelling techniques are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unusual multiferroicity in Cu{sub 3}Nb{sub 2}O{sub 8}

Cu{sub 3}Nb{sub 2}O{sub 8} is an anti-ferromagnetic - ferroelectric material in which the non-collinear spin alignment leads to breaking of spatial inversion symmetry. We confirm that the ferroelectricity and magnetic anomaly both occur at T{sub N1} = 25K. The emergence of ferroelectricity due to complex spin ordering is investigated by the temperature dependent low temperature measurements of magnetization, dielectric constant and electric polarization. The microscopic origin to explain magneto-electric coupling in this compound is based on a model based on ferroaxial coupling rather than inverse Dzyalonshkii-Moria interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superspin glassy behaviour of La{sub 0.7}Ca{sub 0.3}Mn{sub 0.85}Al{sub 0.15}O{sub 3} thin film

Here, we present the low temperature magnetic behaviour of epitaxial La{sub 0.7}Ca{sub 0.3}Mn{sub 0.85}Al{sub 0.15}O{sub 3} (LCMAO) thin film through a series of DC magnetic measurements. Overall behaviour inferred from the magnetization measurements indicate that the magnetic phases created due to Al doping induced inhomogeneous distribution of Mn{sup 3+} and Mn{sup 4+} ions and oxygen vacancies present in the system act like superspins, and the strong interaction among themselves results in the superspin glassy behaviour. Interactions among the superspins are marked by the aging and zero filed memory effects. The glassy magnetic phase in LCMAO is found to follow the hierarchical model of spin glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Parity conservation in electron-phonon scattering in zigzag graphene nanoribbon

In contrast with carbon nanotubes, the absence of translational symmetry (or periodical boundary condition) in the restricted direction of zigzag graphene nanoribbon removes the selection rule of subband number conservation. However, zigzag graphene nanoribbons with even dimers do have the inversion symmetry. We, therefore, propose a selection rule of parity conservation for electron-phonon interactions. The electron-phonon scattering matrix in zigzag graphene nanoribbons is developed using the tight-binging model within the deformation potential approximation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solute embrittlement of SiC

The energies and stresses associated with the decohesion of β-SiC in the presence of mobile Pd and Ag impurities are studied from first principles. Density functional theory calculations are parameterized with a generalized cohesive zone model and are analyzed within a thermodynamic framework that accounts for realistic boundary conditions in the presence of mobile impurities. We find that Pd impurities will embrittle SiC when Pd is in equilibrium with metallic Pd precipitates. Our thermodynamic analysis predicts that Pd embrittles SiC by substantially reducing the maximum stress of decohesion as a result of a phase transition between decohering planes involving an influx of Pd atoms. The methods presented in this work can be applied to study the thermodynamics of decohesion of SiC in other aggressive environments containing oxygen and water, for example, and yield environment dependent cohesive zone models for use in continuum approaches to study crack propagation and fracture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Parametric modeling of energy filtering by energy barriers in thermoelectric nanocomposites

We present a parametric modeling of the thermoelectric transport coefficients based on a model previously used to interpret experimental measurements on the conductivity, σ, and Seebeck coefficient, S, in highly Boron-doped polycrystalline Si, where a very significant thermoelectric power factor (TPF) enhancement was observed. We have derived analytical formalism for the transport coefficients in the presence of an energy barrier assuming thermionic emission over the barrier for (i) non-degenerate and (ii) degenerate one-band semiconductor. Simple generic parametric equations are found that are in agreement with the exact Boltzmann transport formalism in a wide range of parameters. Moreover, we explore the effect of energy barriers in 1-d composite semiconductors in the presence of two phases: (a) the bulk-like phase and (b) the barrier phase. It is pointed out that significant TPF enhancement can be achieved in the composite structure of two phases with different thermal conductivities. The TPF enhancement is estimated as a function of temperature, the Fermi energy position, the type of scattering, and the barrier height. The derived modeling provides guidance for experiments and device design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resonance energy transfer: Dye to metal nanoparticles

In the present study, surface energy transfer (SET) from Coumarin 540A (C540 A) to Gold nanoparticle (Au) is demonstrated. The observed results show pronounced effect on the photoluminescence intensity and shortening of the lifetime of Coumarin 540A upon interaction with the spherical gold nanoparticle, also there are measured effects on radiative rate of the dye. Experimental results are analyzed with fluorescence resonance energy transfer (FRET) and SET theories. The results obtained from distance-dependent quenching provide experimental evidence that the efficiency curve slope and distance of quenching is best modeled by surface energy transfer process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the thermal properties of filaments for 3D printing

Various materials are used for 3D printing, most commonly Acrylonitrile butadiene styrene (ABS), Polylactic acid (PLA), Polyethylene (PET) and Polypropylene (PP). These materials differ mainly in their melting point, which significantly influences the properties of the final products. Filaments are melted in the print head during the printing process. The temperature range is from 150 °C to 250 °C depending on the technology used. The optimum temperature for the cooling substrate on which printing is carried out is chosen so as to ensure uniform cooling and deformation. It generally varies between (40 – 100) °C. From the above it is clear that both temperatures can significantly affect the properties of the printed 3D object. It is therefore important to determine the thermal parameters (thermal conductivity, specific heat and thermal diffusivity) of the materials used across the entire range of temperatures. For evaluating the properties of different types of PLA materials, the step transient method was used, which allows determination of all required parameters using a fractal heat transfer model.

36 MATERIALS SCIENCE↗

Stokes parameters of the radiation of transverse-single-mode InGaAs/AlGaAs lasers with a quantum-well active region

A study of lasers with two different heterostructures has revealed that the polarisation state of laser radiation depends strongly on the specific sample at pump currents corresponding to the regular behaviour of the light-current characteristic. Thus, the deviation of the radiation polarisation from linear can be used as a sensitive characteristic of the laser quality. It is found that anomalies in the power-current characteristic (the so-called kinks) are accompanied by a significant decrease in the degree of polarisation. The measured degrees of polarisation of spontaneous emission from samples (at pump currents much below the threshold) are in good agreement with the theoretical estimate obtained within the three-band model of optical transitions. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Numerical Stress Analysis during Cooldown and Compressive Loading in an Imperfect Nb 3 Sn Wire

In this paper, high field superconductors are critical to the success of next step magnetic fusion confinement devices such as ITER and DEMO. The low-temperature superconducting material that is currently favored for these applications, Nb 3 Sn, is susceptible to performance due to its brittleness and high strain-sensitivity. Under extreme loads, an irreversible degradation in the maximum critical current density has been shown to occur and believed to be strongly influenced by two factors: plasticity and cracked filaments. Cracks in filaments are induced when sufficiently high stress concentrations occur in the wire. In this paper, we explore using finite element analysis the impact that voids have on the stress distributions and peak stresses under two loading conditions: transverse compressive loading in a 2D model, and a full cool down phase in a 3D model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ROTATION OF CORONAL MASS EJECTIONS DURING ERUPTION

Understanding the connection between coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) is one of the most important problems in solar-terrestrial physics. We calculate the rotation of erupting field structures predicted by numerical simulations of CME initiation via the magnetic breakout model. In this model, the initial potential magnetic field has a multipolar topology and the system is driven by imposing a shear flow at the photospheric boundary. Our results yield insight on how to connect solar observations of the orientation of the filament or polarity inversion line (PIL) in the CME source region, the orientation of the CME axis as inferred from coronagraph images, and the ICME flux rope orientation obtained from in situ measurements. We present the results of two numerical simulations that differ only in the direction of the applied shearing motions (i.e., the handedness of the sheared-arcade systems and their resulting CME fields). In both simulations, eruptive flare reconnection occurs underneath the rapidly expanding sheared fields transforming the ejecta fields into three-dimensional flux rope structures. As the erupting flux ropes propagate through the low corona (from 2 to 4 R{sub sun}) the right-handed breakout flux rope rotates clockwise and the left-handed breakout flux rope rotates counterclockwise, in agreement with recent observations of the rotation of erupting filaments. We find that by 3.5 R {sub sun} the average rotation angle between the flux rope axes and the active region PIL is approximately 50 deg. We discuss the implications of these results for predicting, from the observed chirality of the pre-eruption filament and/or other properties of the CME source region, the direction and amount of rotation that magnetic flux rope structures will experience during eruption. We also discuss the implications of our results for CME initiation models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗