Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Fabrication of single phase p-CuInSe{sub 2} nanowire arrays by electrodeposited into anodic alumina templates

Single-phase CuInSe{sub 2} nanowire (NW) arrays were prepared at various pH values in a heated electrolyte by using pulse electrodeposition techniques and an anodized aluminum oxide template. X-ray diffraction showed that the CuInSe{sub 2} NW nucleation mechanism received H{sup +} constraints when the NWs were deposited at pH 1.7 with a (112) orientation and annealed at 550 °C. The CuInSe{sub 2} NW band gap was determined to be approximately 1 eV through optical measurements. Transmission electron microscopy showed that at the pH value of 1.7, small particles of the single-phase CuInSe{sub 2} NWs aligned along the crystallographic direction are nucleated to form large particles. Scanning electron microscopy revealed that the NW diameter and the length were 80 nm and 2.3 μm, respectively. From Mott–Schottky and Ohmic contact plots, the CuInSe{sub 2} NWs were found to be p-type semiconductors, and their work function was estimated to be approximately 4.69 eV.

36 MATERIALS SCIENCE↗

Silver nanoparticle production by Rhizopus stolonifer and its antibacterial activity against extended spectrum {beta}-lactamase producing (ESBL) strains of Enterobacteriaceae

Highlights: {yields} Silver nanoparticle production by using Rhizopus stolonifer. {yields} Antibacterial activity of silver nanoparticles against extended spectrum {beta}-lactamase producing (ESBL) strains of Enterobacteriaceae. {yields} Synergistic effect of antibiotics with silver nanoparticles towards ESBL-strains. {yields} Characterization of silver nanoparticles made by UV-vis spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transformed infrared (FTIR) spectroscopy, atomic force microscopy (AFM). -- Abstract: This report focuses on the synthesis of silver nanoparticles using the fungus, Rhizopus stolonifer and its antimicrobial activity. Research in nanotechnology highlights the possibility of green chemistry pathways to produce technologically important nanomaterials. Characterization of newly synthesized silver nanoparticles was made by UV-visible absorption spectroscopy, scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier transform infrared (FTIR) spectroscopy and atomic force microscope (AFM). TEM micrograph revealed the formation of spherical nanoparticles with size ranging between 3 and 20 nm. The biosynthesized silver nanoparticles (AgNPs) showed excellent antibacterial activity against ESBL-strains which includes E. coli, Proteus. sp. and Klebsiella sp.

36 MATERIALS SCIENCE↗

Influence of concentration and volume of precursor on the electrochemical properties of vanadium oxide thin films prepared by spray pyrolysis

Vanadium oxide (V{sub 2}O{sub 5}) thin films have been prepared by spray pyrolysis using different concentrations and volumes of precursor solution via aqueous route at 673K deposition temperature. The influences of concentration and volume on the structural, morphological and electrochemical properties of the deposited samples are studied well. X - ray diffraction study shows orthorhombic crystal structure with V{sub 2}O{sub 5} phase, confirmed by FTIR spectroscopy. Scanning electron microscopy shows granular, homogeneous and dense surface morphology. Cyclic voltammetery of all samples carried at all scan rates. Samples prepared using 0.05M, 40 ml of precursor solution shows highest specific capacitance 428.25 F/gm at 5 mV/s, Charge discharge behavior exhibits specific energy 18.73 Wh/kg, specific power 36.00 kW/kg, columbic efficiency 87.50 %. Impedance spectroscopy study was carried in the frequency range 1mHz – 1MHz, reveals pseudocapacitive behavior of the electrode exhibiting internal resistance 1.34 ohm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metalorganic chemical vapor deposition of ZnGeN 2 films on GaN: effects of cation stoichiometry on surface morphology and crystallinity

Novel optoelectronic device designs based on the heterostructures of III-N and II-IV-N 2 are promising to advance device performance significantly. For example, by utilizing InGaN-ZnGeN 2 quantum well (QW) structures instead of pure InGaN, the band structure engineering in the QW active region can lead to improved electron-hole wavefunction overlap, and thus enhance the radiative efficiency for photon generation. These novel heterostructures have great potential to address the current challenge of low quantum efficiency in InGaN QW based light emitting diodes emitting in green and beyond. The materials development of ZnGeN 2 is still at an early stage as compared to the much matured GaN material system. In an ideal octet rule preserving ordered structure of ZnGeN 2 , every N atom is coordinated by exactly two Zn and two Ge atoms. However, local violation of octet rule can be caused by non-ideal coordination of N by the cations. The disordered structure is thermodynamically less favorable but can still be achieved, for example, in kinetics-limited growth regime. The ordered ZnGeN 2 has a bandgap very close to that of GaN (~3.4 eV) and a lattice mismatch of <0.1% with GaN. Interestingly, the valence band of ZnGeN 2 has been predicted to be ~1 eV above that of GaN, which has inspired novel designs for high efficiency light emitters. In this work, we investigated the metalorganic chemical vapor deposition (MOCVD) of ZnGeN 2 films on GaN/c-sapphire templates. Diethylzinc (DEZn), germane (GeH4) and ammonia were used as the precursors for Zn, Ge and N, respectively. A systematic study was conducted to investigate the cation stoichiometry as a function of growth temperature (TG), total reactor pressure (P) and DEZn/GeH 4 molar flow rate ratio (RII/IV). Under the investigated growth window, the Zn/(Zn+Ge) composition in the films, determined from energy dispersive X-ray spectroscopy, decreased monotonically with increase in TG but increased with increase in P and RII/IV. Atom probe tomography data did not indicate the presence of any secondary phases such as Zn 3 N 2 or Ge 3 N 4 . The surface morphology and crystallinity of the grown films had strong correlation with the Zn/(Zn+Ge) composition. The scanning electron microscopy images showed that the near-stoichiometric films have planar surfaces whereas Zn-rich films had crystallites on their surface and the Zn-poor films had faceted surface. Scanning transmission electron microscopy (STEM) imaging revealed that the Zn-rich and Zn-poor films have columnar and filament-like morphology, respectively, whereas the near-stoichiometric films have continuous film-like cross-sectional morphology. TEM nano-diffraction patterns as well as X-ray diffraction 2θ-ω scan profiles indicate that the near stoichiometric films are single crystalline. Nano-diffraction pattern of the stoichiometric films resembled that of a disordered ZnGeN 2 structure. Room temperature Raman spectra of near-stoichiometric films showed only the phonon density of states like features of a cation disordered ZnGeN 2 . Cathodoluminescence and photoluminescence spectra measured at different temperatures had similar features with peak emission wavelength at ~ 2 eV. In conclusion, the stoichiometry of ZnGeN 2 films can be widely tuned by tuning the MOCVD growth parameters. The surface morphology and the crystallinity of the films were found to have strong correlation with the Zn/(Zn+Ge) composition. The stoichiometric ZnGeN 2 films grown on GaN were demonstrated with uniform surface morphology and high crystalline quality. The results from this work will provide pathway to implement ZnGeN 2 in device structures.

Karim, Md Rezaul↗

Controllable fabrication of platinum nanospheres with a polyoxometalate-assisted process

Pt nanospheres with an average diameter of 60{+-}10 nm have been successfully synthesized at room temperature through a facile polyoxometalate(POM)-assisted process. Characterization by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) clearly showed that these Pt nanospheres consisted of 2-7 nm Pt nanodots. During the formation of such unique nanostructures, POMs were found to serve as both catalyst and stabilizer. The size of the as-synthesized Pt nanospheres could be controlled solely by adjusting the molar ratio of POMs to H{sub 2}PtCl{sub 6}. A possible formation mechanism based on POMs-mediated electron transfer from ascorbic acid (AA) to PtCl{sub 6}{sup 2-} and AA-assisted aggregation was tentatively proposed to rationalize the formation of such nanostructures. Importantly, these specific Pt nanospheres exhibited good electrocatalytic activity towards the oxidation of methanol, making them promising for applications in direct methanol fuel cells. - Graphical abstract: Large-scale Pt nanospheres were synthesized through a polyoxometalate-assisted process, and exhibited good electrocatalytic activity towards the oxidation of methanol, making them promising for applications in fuel cells. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring carbon nanotips in the plasma-assisted chemical vapor deposition: Effect of the process parameters

Carbon nanotips have been synthesized from a thin carbon film deposited on silicon by bias-enhanced hot filament chemical vapor deposition under different process parameters. The results of scanning electron microscopy indicate that high-quality carbon nanotips can only be obtained under conditions when the ion flux is effectively drawn from the plasma sustained in a CH{sub 4}+NH{sub 3}+H{sub 2} gas mixture. It is shown that the morphology of the carbon nanotips can be controlled by varying the process parameters such as the applied bias, gas pressure, and the NH{sub 3}/H{sub 2} mass flow ratios. The nanotip formation process is examined through a model that accounts for surface diffusion, in addition to sputtering and deposition processes included in the existing models. This model makes it possible to explain the major difference in the morphologies of the carbon nanotips formed without and with the aid of the plasma as well as to interpret the changes of their aspect ratio caused by the variation in the ion/gas fluxes. Viable ways to optimize the plasma-based process parameters to synthesize high-quality carbon nanotips are suggested. The results are relevant to the development of advanced plasma-/ion-assisted methods of nanoscale synthesis and processing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication and characterization of extended arrays of Ag{sub 2}S/Ag nanodot resistive switches

Well-ordered Ag{sub 2}S/Ag nanodot arrays with a density of >60 Gbit/in.{sup 2} have been fabricated by sputtering Ag on a silicon substrate using ultrathin porous anodic aluminum oxide membranes as shadow masks, followed by sulfurization treatment at room temperature. The morphology, microstructure, and electrical properties of the as-prepared nanodots were characterized by scanning electron microscopy, x-ray diffractometry, transmission electron microscopy, and conductive atomic force microscopy, respectively. Well-defined resistive switching behavior was observed in these nanodots, and the ON/OFF ratio was found to be higher than 10{sup 2}. The Ag{sub 2}S/Ag nanodot arrays hold substantial promise for use as ultrahigh density nonvolatile memory devices.

36 MATERIALS SCIENCE↗

The influence of electrochemical cycling protocols on capacity loss in nickel-rich lithium-ion batteries

The transition towards electric vehicles and more sustainable transportation is dependent on lithium-ion battery (LIB) performance. Ni-rich layered transition metal oxides, such as NMC811 (LiNi 0.8 Mn 0.1 Co 0.1 O 2 ), are promising cathode candidates for LIBs due to their higher specific capacity and lower cost compared with lower Ni content materials. However, complex degradation mechanisms inhibit their use. In this work, tailored aging protocols are employed to decouple the effect of electrochemical stimuli on the degradation mechanisms in graphite/NMC811 full cells. Using these protocols, impedance measurements, and differential voltage analysis, the primary drivers for capacity fade and impedance rise are shown to be large state of charge changes combined with high upper cut-off voltage. Focused ion beam-scanning electron microscopy highlights that extensive microscale NMC particle cracking, caused by electrode manufacturing and calendering, is present prior to aging and not immediately detrimental to the gravimetric capacity and impedance. Scanning transmission electron microscopy electron energy loss spectroscopy reveals a correlation between impedance rise and the level of transition metal reduction at the surfaces of aged NMC811. The present study provides insight into the leading causes for LIB performance fading, and highlights the defining role played by the evolving properties of the cathode particle surface layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A microfluidic electrochemical cell for studying the corrosion of uranium dioxide (UO 2 )

We have developed a specialized microfluidic electrochemical cell that enables in situ investigation of the electrochemical corrosion of microgram quantities of redox active solids. The advantage of downscaling is the reduction of hazards, waste, expense, and greatly expanding data collection for hazardous materials, including radioactive samples. Cyclic voltammetry was used to monitor the oxidation–reduction cycle of minute quantities of micron-size uraninite (UO 2 ) particles, from the formation of hexavalent uranium (U(VI)), U 3 O 7 and reduction to UO 2+x . Reaction progress was also studied in situ with scanning electron microscopy. The electrochemical measurements matched those obtained at the bulk-scale and were consistent with ex situ characterization of the run products by X-ray photoelectron spectroscopy, scanning transmission electron microscopy, and atomic force microscopy; thus, demonstrating the utility of the microfluidic approach for studying radioactive materials.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Fabrication and Characterization of A5083-WC-Al{sub 2}O{sub 3} Surface Composite by Friction Stir Processing

In this study, WC-Al{sub 2}O{sub 3} ceramic composite was incorporated into Al5083 to produce a surface composite by friction stir processing (FSP), and the microstructure, hardness and wear properties of Al5083-WC-Al{sub 2}O{sub 3} surface composite were evaluated. Optical microscopy of FSPed samples showed grain refinement in the stir zone. The addition of WC-Al{sub 2}O{sub 3} particles as well as increase in FSP pass number had a considerable effect on grain refinement, and the grain size of Al5083 base metal of 36 µm reduced to 11 µm for Al5083-WC-Al{sub 2}O{sub 3} surface composite after four passes. The SEM observation of the surface composite revealed that the WC-Al{sub 2}O{sub 3} particles distributed homogenously in the matrix and by increasing the FSP passes, the initial agglomerates of mechanochemically synthesized WC-Al{sub 2}O{sub 3} powders could be fractured. Microhardness evaluation showed a substantial improvement by adding WC-Al{sub 2}O{sub 3} particles and increase in FSP pass number. The maximum microhardness value of 101 HV belonged to surface composite after four passes, while the microhardness of the base metal was 65 HV. Wear test results revealed enhanced tribological behavior with a similar trend of microhardness values. Scanning electron microscopy tests revealed both adhesive and abrasive wear mechanisms on the surface of the wear test specimens.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of a novel non-stoichiometric cubic bismuth phosphate (Bi{sub 12}(Bi{sub 4/5–5x}P{sub 5x})O{sub 19.2+5x}) crystal and the coexistence of multilevel Kink-Terrace-Step structures on Kossel (1 0 0) surface

- Highlights: • Pure cubic phase could be synthesized at high alkalinity. • The height of the lowest kinked [0 1 0] steps was about half of the unit cell. • Multilevel Kink-Terrace-Step structures coexisted on Kossel (1 0 0) surface. • Multilevel growth units are PO{sub 4}{sup −} incorporating into the channels of Bi–O frameworks. - Abstract: Nonstoichiometric cubic bismuth phosphate crystals were synthesized and grown by hydrothermal method. Under high alkalinity condition, three dimensional nuclei were generated and combined into cubic plates. The cubic bismuth phosphate crystals were combined by the corresponding cubic plates with various defects and rough surfaces. The cubic plates made (1 0 0) surface of the crystal cleavage face. Additionally, multilevel Kink-Terrace-Step structures on Kossel (1 0 0) surface were characterized through scanning electron microscopy and atomic force microscope techniques, respectively. It revealed that the lowest level Kink-Terrace-Step structure was in nano-scale, and the height of the elemental kinked [0 1 0] steps was about half of the unit cell. The elemental kinked [0 1 0] steps could bunch together and consequently constructed a higher level of Kink-Terrace-Step structures. As a result, multilevel Kink-Terrace-Step structures coexisted on the Kossel (1 0 0) surface of bismuth phosphate crystal, which were owing to the coexistence of multilevel growth units in crystal growth system.

36 MATERIALS SCIENCE↗

The Role of Ge Wetting Layer and Ge Islands in Si MSM Photodetectors

In this work, Ge thin films were deposited on silicon substrates by radio frequency magnetron sputtering to form Ge islands from Ge layer on Si substrate during post-growth rapid thermal annealing (RTA). The size of the islands decreases from 0.6 to 0.1 as the rapid thermal annealing time increases from 30 s to 60 s at 900 deg. C. Not only that the annealing produces Ge islands but also wetting layer. Energy Dispersive X-ray Spectroscopy (EDX) and Scanning Electron Microscopy (SEM) were employed for structural analysis of Ge islands. Metal-Semiconductor-Metal photodetectors (MSM PDs) were fabricated on Ge islands (and wetting layer)/Si. The Ge islands and wetting layer between the contacts of the fabricated devices are etched in order to see their effects on the device. The performance of the Ge islands MSM-PD was evaluated by dark and photo current-voltage (I-V) measurements at room temperature (RT). It was found that the device with island and wetting layer significantly enhance the current gain (ratio of photo current to dark current) of the device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SYNTHESIS AND CHARACTERIZATION OF SMART FUNCTIONAL COATINGS BY CHEMICAL SOLUTION DEPOSITION METHODS

New coating technology enables the fabrication of low cost structural health monitoring (SHM) and tamper indication devices that can be employed to strengthen national and international safeguards objectives. In particular, such innovations could serve the safeguards community by improving both the timeliness of detection and confidence in verification and monitoring. This work investigates the synthesis of functional surface coatings using chemical solutions deposition methods. Chemical solution deposition has recently received attention in the materials research community due to its unique advantages such as low temperature processing, high homogeneity of final products and the ability to fabricate materials with controlled surface properties and pore structures. The synthesis of functional coatings aimed at modifying the materials conductivity and optical properties was investigated by the incorporation of transition element (e.g. Cr{sup +3}) and rare earth (e.g. Er{sup +3}) serving as dopants in a polymer or gel matrix. The structural and morphological investigation of the as-deposited films was carried out using UV/Vis and photoluminescence (PL) spectroscopy. The as deposited coating was further investigated by scanning electron microscopy and energy dispersive x-ray microscopy.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Efficient SnO{sub 2}/CuO/porous silicon nanocomposites structure for NH{sub 3} gas sensing by incorporating CuO nanoparticles

In this paper, a porous silicon (Psi) surface modification process, including the incorporating of pure and CuO mixed SnO{sub 2} within a Psi layer, was investigated. A Psi layer with a pore-like structure prepared via laser-assisted etching process with a laser illumination intensity of (40) mW/cm{sup 2} was employed as a substrate for materialization SnO{sub 2}/CuO/Psi nanocomposites for gas sensing application. Pure SnO{sub 2} and SnO{sub 2}:CuO nanoparticles were synthesized via a chemical spray pyrolysis process on the Psi surface at 350 °C. The materialization of SnO{sub 2}:CuO/Psi nanocomposites were recognized through Field-Emission Scanning Electron Microscopy, X-ray Diffraction, Atomic Force Microscopy, and Energy-dispersive X-ray Analysis. The results displayed that the morphological properties of SnO{sub 2}:CuO nanoparticles were definitely controlled by varying the CuO contents. Different shapes (nearly cubic shape and spherical shape) with various sizes of SnO{sub 2} and SnO{sub 2}:CuO within the Psi surface were achieved by increasing the CuO content. SnO{sub 2}:CuO/Psi nanocomposites, plans, grain size, average surface roughness, homogeneity and specific surface area of SnO{sub 2}:CuO nanoparticles were considerably influenced by CuO content. The lower grain size and higher average surface roughness and specific surface area were attained when the percentage of CuO was about 30% within the structure of 70% SnO{sub 2}:30% CuO, and the performance of the NH{sub 3} gas sensor revealed a short response time with a high sensitivity of (88%).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low temperature molten-salt synthesis of nanocrystalline cubic Sr{sub 2}SbMnO{sub 6}

Sr{sub 2}SbMnO{sub 6} (SSM) powders were successfully synthesized at reasonably low temperatures via molten-salt synthesis (MSS) method using eutectic composition of 0.635 Li{sub 2}SO{sub 4}-0.365 Na{sub 2}SO{sub 4} (flux). High-temperature cubic phase SSM was stabilized at room temperature by calcining the as-synthesized powders at 900 deg. C/10 h. The phase formation and morphology of these powders were characterized via X-ray powder diffraction and scanning electron microscopy, respectively. The SSM phase formation associated with {approx}60 nm sized crystallites was also confirmed by transmission electron microscopy. The activation energy associated with the particle growth was found to be 95+-5 kJ mol{sup -1}. The dielectric constant of the tetragonal phase of the ceramic (fabricated using this cubic phase powder) with and without the flux (sulphates) has been monitored as a function of frequency (100 Hz-1 MHz) at room temperature. Internal barrier layer capacitance (IBLC) model was invoked to rationalize the dielectric properties. - Graphical abstract: The as synthesized powders of Sr{sub 2}SbMnO{sub 6} calcined at 900 deg. C/10 h yielded a cubic phase ({approx}60 nm sized crystallites). Centrosymmetric tetragonal (I4/mcm) phase was obtained by increasing the calcination temperature to 1000 deg. C. Display Omitted

36 MATERIALS SCIENCE↗

New strategy to the controllable synthesis of CuInS{sub 2} hollow nanospheres and their applications in lithium ion batteries

A new strategy has been presented to the controllable synthesis of CuInS{sub 2} hollow nanospheres based on the Cu{sub 2}O solid nanospheres as the precursor in the absence of any surfactant. Specifically, the CuInS{sub 2} hollow nanospheres result from hydrothermal transformation of the intermediate Cu{sub 7}S{sub 4} hollow nanospheres derived from Cu{sub 2}O solid nanosphere precursor by the Kirkendall effect in the conversion process. The CuInS{sub 2} hollow nanospheres with diameters of about 250 nm are assembly of nanoparticles with an average size of 20-30 nm. The composition, structure, and morphology of the Cu{sub 2}O precursor, the Cu{sub 7}S{sub 4} intermediate, and final CuInS{sub 2} product have been, respectively, characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) with selected area electron diffraction (SAED). Different from investigation of photovoltaic properties, in this work, the as-prepared CuInS{sub 2} hollow nanospheres have been explored as anode materials for rechargeable lithium ion batteries. They deliver a large initial discharge capacity of 1144 mAh g{sup -1} and exhibit good cycle performance with a discharge capacity of 265 mAh g{sup -1} after 20 cycles, which are superior to those of CuInS{sub 2} nanoparticles. The suitable surface area and relatively stable structure of the CuInS{sub 2} hollow nanospheres play an important role in their enhanced electrochemical performance as anode materials. - Graphical abstract: CuInS{sub 2} hollow nanospheres was successfully prepared from Cu{sub 2}O solid nanospheres in the absence of any surfactant, which can deliver a large initial discharge capacity of 1144 mAh g{sup -1} and exhibit good cycle performance. Highlights: Black-Right-Pointing-Pointer CuInS{sub 2} hollow nanospheres were synthesized hydrothermally from Cu{sub 2}O nanospheres. Black-Right-Pointing-Pointer The CuInS{sub 2} hollow nanospheres present high discharge capacities as anode materials. Black-Right-Pointing-Pointer Better cycling performance can be attributed to its hollow structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyol-mediated solvothermal synthesis and luminescence properties of CeF{sub 3}, and CeF{sub 3}:Tb{sup 3+} nanocrystals

CeF{sub 3} and CeF{sub 3}:Tb{sup 3+} nanocrystals were successfully synthesized through a facile and effective polyol-mediated route with ethylene glycol (EG) as solvent. Various experimental techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectra as well as decay dynamics were used to characterize the samples. The results indicated that the content of NH{sub 4}F and reactant concentrations were key factors in the product shape and size. Excessive NH{sub 4}F was necessary for the formation of hexagonal nanoplates. The specific morphology of product can be controlled by changing the NH{sub 4}F content and reactant concentrations. In addition, Tb{sup 3+} doped-CeF{sub 3} sample shows strong green emission centered at 544 nm corresponding to the {sup 5}D{sub 4}-{sup 7}F{sub 5} transition of Tb{sup 3+}. Due to the decrease of nonradiative decay rate, the lifetime of {sup 5}D{sub 4} level of Tb{sup 3+} become longer gradually upon increasing the size of product. -- Graphical abstract: 0D nanoparticles and 2D nanoplates CeF{sub 3} and CeF{sub 3}:Tb{sup 3+} have been successfully fabricated through a facile polyol process. Display Omitted Research highlights: {yields} 0D nanoparticles and 2D nanoplates CeF{sub 3} were fabricated by polyol process. {yields} Morphology of product depends on the content of NH{sub 4}F and reactant concentrations. {yields} CeF{sub 3}:Tb{sup 3+} shows strong green emission via Ce{sup 3+}-Tb{sup 3+} energy transfer route. {yields} Decay process of {sup 5}D{sub 4} level of Tb{sup 3+} tends to slower increasing the size of products.

36 MATERIALS SCIENCE↗

Comparative dielectric studies of nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12} and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} nano-composites synthesized by modified sol–gel and solid state methods

BaTiO{sub 3} (BTO), CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) and 0.5BaTiO{sub 3}·0.5CaCu{sub 3}Ti{sub 4}O{sub 12} (BTO–CCTO), as a new nano-composite ceramic, were successfully designed and fabricated by a semi-wet gel route and a modified solid state method. The dielectric properties of the BTO–CCTO ceramic were compared to those of the BTO and CCTO ceramics at lower sintering temperatures and durations. The X-ray diffraction analysis revealed that the BTO and CCTO ceramics form a single crystalline phase and the average crystalline sizes calculated from X-ray diffraction data were in the range of 40–65 nm. The particle sizes of the BTO, CCTO, and BTO–CCTO ceramics obtained from transmission electron microscopy images were in the ranges of 40–65 nm, 80–110 nm, and 70–95 nm, respectively. The phase composition and microstructure were studied by X-ray diffraction and scanning electron microscopy. The energy dispersive X-ray results demonstrated the purity and stoichiometry of the BTO–CCTO nano-composite. The grain sizes of the BTO, CCTO and BTO–CCTO ceramics were found to be in the ranges of 500 nm–1 μm, 4–24 μm, and 250 nm–4 μm, respectively. The AC conductivity as a function of frequency confirmed the semiconducting nature of all of the ceramics and obeyed the Jonscher's power law. The impedance spectrum measurement result showed that the CCTO ceramic possessed an exceptional grain boundary resistance, which supports the internal barrier layer capacitance (IBLC) mechanism present in this ceramic and is responsible for the high ε{sub r} values. - Highlights: • Nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12}, and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} have been synthesized. • XRD and TEM analysis confirmed the formation of nanoparticles, 40–65 and 50–90 nm. • Impedance analysis shows high grain-boundary resistance present in CCTO ceramic. • AC conductivity as a function of frequency confirms the semiconducting nature.

36 MATERIALS SCIENCE↗