Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shuttle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

The prevention of electronical breakdown and electrostatic voltage problems in the space shuttle and its payloads. Part 2: Design guides and operations considerations

The specific electrical discharge problems that can directly affect the shuttle vehicle and its payloads are addressed. General design guidelines are provided to assist flight hardware managers in minimizing these kinds of problems. Specific data are included on workmanship practices and system testing while in low pressure environments. Certain electrical discharge problems that may be unique to the design of the shuttle vehicle itself and to its various mission operational models are discussed.

Whitson, D. W.↗

Use of nose cap and fuselage pressure orifices for determination of air data for space shuttle orbiter below supersonic speeds

Wind tunnel pressure measurements were acquired from orifices on a 0.1 scale forebody model of the space shuttle orbiter that were arranged in a preliminary configuration of the shuttle entry air data system (SEADS). Pressures from those and auxiliary orifices were evaluated for their ability to provide air data at subsonic and transonic speeds. The orifices were on the vehicle's nose cap and on the sides of the forebody forward of the cabin. The investigation covered a Mach number range of 0.25 to 1.40 and an angle of attack range from 4 deg. to 18 deg. An air data system consisting of nose cap and forebody fuselage orifices constitutes a complete and accurate air data system at subsonic and transonic speeds. For Mach numbers less than 0.80 orifices confined to the nose cap can be used as a complete and accurate air data system. Air data systems that use only flush pressure orifices can be used to determine basic air data on other aircraft at subsonic and transonic speeds.

Larson, T. J.↗

Shuttle integration status

The paper examines systems certification methodology for the Space Shuttle. Attention is then given to recent activities that will enhance the capability of the Shuttle during the operational period; structural dynamics, main propulsion, and thrust augmentation are considered.

Morris, O. G.↗

Cooling a radioisotope power source in the Space Shuttle Orbiter

Radioisotope thermoelectric generators (RTG's), used to generate electrical power on outer planetary spacecraft, are presently planned for a January 1982 launch of Galileo and later for a February 1983 launch. The RTG's will be externally located on a spacecraft to be deployed from the Space Shuttle Orbiter. Each RTG rejects nearly 2.5 kW (8500 Btu/hr) of thermal energy. From the time the RTG's are loaded into the payload bay until the doors are opened one to three hours after launch, active cooling will maintain proper temperature limits. This paper includes a description of two types of RTG's and the various cooling concepts considered. The payload cooling capability of the Shuttle Orbiter and modifications required to accommodate the RTG's are discussed. The analytical technique for determining the heat load split between the orbiter environment and RTG coolant is also presented.

Levine, D. I.↗

Space Shuttle external tank: Today - DDT & E: Tomorrow - Production

The External Tank (ET) is the structural backbone of the Space Shuttle. The ET is discussed relative to its role; its design as a highly efficient Shuttle element; the liquid oxygen tank - a thin shelled monocoque; the intertank - the forward structural connection; the liquid hydrogen tank structure - the connection with the Orbiter; the ET structural verification; the propulsion system - a variety of functions; the electrical subsystem; electrical subsystem qualification; the thermal protection system; and other related problems. To date the qualification programs have been extremely successful and are almost complete, and the first flight tank has been delivered. Tomorrow's objectives will concentrate on establishing the facilities, tools and processes to achieve a production rate of 24 ETs/year.

Norton, A. M.↗

Design alternatives for the Shuttle Infrared Telescope Facility

The paper discusses the Shuttle Infrared Telescope Facility (SIRTF), a versatile astronomical telescope that can accomodate photometric, spectroscopic, and polarimetric measurements. It is expected to be 100 to 1000 times more sensitive than any existing infrared telescope; detailed designs of cooled IR telescopes were made for the Infrared Astronomical Satellite and the Small Helium Cooled Infrared Telescope for Spacelab 2. Rocket tests verified the capability of using superfluid helium as a cryogen in zero gravity. Constraints on funds for Shuttle payloads require an evolutionary approach to the development of the full potential of SIRTF, necessitating consideration of design alternatives involving the optical configuration, the cryogen, the mechanical structure, and size of SIRTF.

Witteborn, F. C.↗

Economics of the solid rocket booster for space shuttle

The paper examines economics of the solid rocket booster for the Space Shuttle. Costs have been held down by adapting existing technology to the 146 in. SRB selected, with NASA reducing the cost of expendables and reusing the expensive nonexpendable hardware. Drop tests of Titan III motor cases and nozzles proved that boosters can survive water impact at vertical velocities of 100 ft/sec so that SRB components can be reused. The cost of expendables was minimized by selecting proven propellants, insulation, and nozzle ablatives of known costs; the propellant has the lowest available cost formulation, and low cost ablatives, such as pitch carbon fibers, will be used when available. Thus, the use of proven technology and low cost expendables will make the SRB an economical booster for the Space Shuttle.

Rice, W. C.↗

Measurement of hydroxyl radical in the upper atmosphere using lidar from the Space Shuttle

The paper examines the measurements of hydroxyl radical in the upper atmosphere using lidar from the Space Shuttle. The measurement of the latitudinal and diurnal variation of OH would provide tests for stratospheric and mesospheric chemistry; two lidar systems aboard the Space Shuttle are described with the first providing the best signal to noise ratio for nighttime measurements at altitudes above 40 km, and the second giving a better performance during the day and at lower altitudes.

Heaps, W. S.↗

Stratospheric aerosol modification by supersonic transport and space shuttle operations - Climate implications

The potential effects on stratospheric aerosols of supersonic transport emissions of sulfur dioxide gas and submicron soot granules, and space shuttle rocket emissions of aluminum oxide particulates are estimated. An interactive particle-gas model of the stratospheric aerosol layer is used to calculate changes due to exhaust emissions, and an accurate radiation transport model is employed to compute the effect of aerosol changes on the earth's average surface temperature. It is concluded that the release of large numbers of small particles (soot or aluminum oxide) into the stratosphere should not lead to a corresponding significant increase in the concentration of large, optically active aerosols, but that the increase in large particles is severely limited by the total mass of sulfate available to make large particles in situ, and by the rapid loss of small seed particles via coagulation. We find that a fleet of several hundred advanced supersonic aircraft operating daily at 20 km, or the launch of one space shuttle rocket per week, could produce roughly a 20% increase in the large-particle concentration of the stratosphere. We find, in addition, that aerosol increases of this magnitude would reduce the global surface temperature by less than 0.01 K.

Turco, R. P.↗

Space Shuttle status

Hardware considerations and the orbital flight test program of the Space Shuttle are discussed, including reference to the Space Shuttle main engine, payload bay doors, TV cameras for flight inspection, and launch crew escape schemes. Particular attention is given to the thermal protection system consisting of 32,000 tiles composed of approximately 3% pure silica fibers and 97% air, which has a design requirement of keeping the basic aluminum skin below 350 F for a surface temperature of 2700 F.

Slayton, D. K.↗

Space Shuttle: Dawn of an era; Proceedings of the Twenty-sixth Annual Conference, Los Angeles, Calif., October 29-November 1, 1979. Parts 1 & 2

Aspects of the Space Shuttle program are considered with attention given to DOD applications, the role of the astronaut, industry in space, large platforms in space, the Space Transportation System, and the second generation Shuttle. Also considered are small self-contained payloads, attached payloads, free flying science payloads, free flying applications payloads, space medicine and life sciences, international payloads, and deep-space payloads.

Rector, W. F., III↗

Development of high viscosity coatings for advanced Space Shuttle applications

Laboratory studies for increasing the thermal resistance of high viscosity coatings for silica reusable surface insulation are presented. The coatings are intended for the reentry temperature associated with advanced Space Shuttle applications which will involve aerodynamic shear forces during entry from earth orbits. Coating viscosity was increased by (1) reduction in the concentration of the low viscosity additive B2O3; (2) reduction in the particle size of the constituent powders in coatings; and (3) addition of a high viscosity glass former (GeO2). A coating system was produced by combining the three methods which showed apparent higher viscosity than the current coating, while satisfying all the current Shuttle Orbiter coating requirements.

Garofalini, S. H.↗

Shuttle bay acoustics

Acoustic energy generated during Shuttle liftoff will propagate up the orbiter vehicle, transmit through the payload bay structure, and produce an intense acoustic field inside the bay with the potential for damaging relatively fragile payload components. This paper describes three experimental programs aimed at investigating Shuttle bay acoustics. The first two experiments, conducted in July 1976 and January 1977 respectively, were concerned primarily with establishing the noise reduction of the OV101 payload bay structure; the third set of experiments, carried out during April and May 1978, was concerned with the influence of payloads on the bay acoustic levels. Test results are summarized, and comparisons with analytical model predictions are presented.

Piersol, A. G.↗

Description of the manufacturing challenges in producing the high-temperature reusable surface insulation for the thermal protection system of the Space Shuttle

The paper describes the high-temperature reusable surface insulation for the thermal protection system of the Space Shuttle. This system protects the Space Shuttle Orbiter on reentry and it is an externally attached, rigidized, fibrous silica, machined into 15 x 20 cm tiles. The tiles constitute the High-Temperature Reusable Surface Insulation (HRSI) system, and are used on over 70 percent of the exterior surface where peak temperatures range from 400 to 1260 C. Carbon-carbon leading edges are used in areas where peak temperatures exceed 1650 C, and a Nomex felt flexible insulation system is used in regions below 400 C. Approximately 32,000 tiles are used in the HRSI system, and due to vehicle configuration and aerodynamic requirements no two tiles are alike.

Forsberg, K.↗

Solar-terrestrial research in the Shuttle age

Some ideas concerning solar-terrestrial research during the anticipated Shuttle era are outlined. The scientific objectives of research in the areas of solar physics, physics of the heliosphere, terrestrial magnetospheric and ionospheric physics, and terrestrial atmospheric physics, are discussed. Some typical Shuttle-borne experiments are considered including the monitoring of solar output, the detection of magnetospheric and ionospheric changes, and the detection of lower-atmospheric responses.

Wu, S. T.↗

Space Shuttle Main Engine development /May 1980/

The Space Shuttle Main Engine is the most advanced liquid propellant rocket engine ever developed. During the last year, significant progess has been made toward the identification and solution of several design weaknesses. The initial two test series to certify the engine's readiness for manned flight have been completed, and additional test series are in progress. Operation of the total propulsion system has been demonstrated by a successful series of flight-simulation tests using the three-engine cluster Main Propulsion Test Article. The first set of flight engines has been acceptance tested for use in Shuttle Orbiter 102 (Columbia) for the first manned orbital flight in late 1980 or early 1981. Engine development is continuing with initial demonstrations of full-power level (109%) operation capability.

Sanchini, D. J.↗

Space Shuttle stability and control flight test techniques

A unique approach for obtaining vehicle aerodynamic characteristics during entry has been developed for the Space Shuttle. This is due to the high cost of Shuttle testing, the need to open constraints for operational flights, and the fact that all flight regimes are flown starting with the first flight. Because of uncertainties associated with predicted aerodynamic coefficients, nine flight conditions have been identified at which control problems could occur. A detailed test plan has been developed for testing at these conditions and is presented. Due to limited testing, precise computer initiated maneuvers are implemented. These maneuvers are designed to optimize the vehicle motion for determining aerodynamic coefficients. Special sensors and atmospheric measurements are required to provide stability and control flight data during an entire entry. The techniques employed in data reduction are proven programs developed and used at NASA/DFRC.

Cooke, D. R.↗

Status of the Space Shuttle Solid Rocket Booster

The first Space Shuttle Solid Rocket Boosters have been stacked on the Mobile Launch Platform at the Kennedy Space Center and are ready to be mated with the External Tank and Orbiter in preparation for the first Shuttle flight. This readiness is built upon a design within the state of the art and, to the maximum extent practicable, within the state of experience. Component qualification, subsystem verification, system checkout, and recovery tests are essentially complete and provide the basis for certifying the boosters for manned flight.

Horton, W. P.↗