Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Structural investigation of the Cu{sub 2}Se-In{sub 2}Se{sub 3}-Ga{sub 2}Se{sub 3} phase diagram, X-ray photoemission and optical properties of the Cu{sub 1-z}(In{sub 0.5}Ga{sub 0.5}){sub 1+z/3}Se{sub 2} compounds

Structures of compounds in the Cu{sub 2}Se-In{sub 2}Se{sub 3}-Ga{sub 2}Se{sub 3} system have been investigated through X-ray diffraction. Single crystal structure studies for the so-called stoichiometric compounds Cu(In,Ga)Se{sub 2} (CIGSe) confirm that the chalcopyrite structure (space group I4-bar 2d) is very flexible and can adapt itself to the substitution of Ga for In. On the other hand a structure modification is evidenced in the Cu{sub 1-z}(In{sub 0.5}Ga{sub 0.5}){sub 1+z/3}Se{sub 2} series when the copper vacancy ratio (z) increases; the chalcopyrite structure turns to a modified-stannite structure (I4-bar 2m) when z{>=}0.26. There is a continuous evolution of the structure from Cu{sub 0.74}(In{sub 0.5}Ga{sub 0.5}){sub 1.09}Se{sub 2} to Cu{sub 0.25}(In{sub 0.5}Ga{sub 0.5}){sub 1.25}Se{sub 2} ((i.e. Cu(In{sub 0.5}Ga{sub 0.5}){sub 5}Se{sub 8}), including Cu{sub 0.4}(In{sub 0.5}Ga{sub 0.5}){sub 1.2}Se{sub 2} (i.e. Cu(In{sub 0.5}Ga{sub 0.5}){sub 3}Se{sub 5}). From this single crystal structural investigation, it is definitively clear that no ordered vacancy compound exists in that series. X-ray photoemission spectroscopy study shows for the first time that the surface of powdered Cu{sub 1-z}(In{sub 0.5}Ga{sub 0.5}){sub 1+z/3}Se{sub 2} compounds (z{ne}0) is more copper-poor than the bulk. The same result has often been observed on CIGSe thin films material for photovoltaic applications. In addition, optical band gaps of these non-stoichiometric compounds increase from 1.2 to 1.4 eV when z varies from 0 to 0.75. - Abstract: Pseudo-ternary diagram in the Cu{sub 2}Se-In{sub 2}Se{sub 3}-Ga{sub 2}Se{sub 3} system showing the composition of all the synthesized compounds. The crystal structure of the compounds corresponding to red circles are presented in this study.

36 MATERIALS SCIENCE↗

Synthesis, structure, and bonding in K12Au21Sn4. A polar intermetallic compound with dense Au20 and open AuSn4 layers

The new phase K{sub 12}Au{sub 21}Sn{sub 4} has been synthesized by direct reaction of the elements at elevated temperatures. Single crystal X-ray diffraction established its orthorhombic structure, space group Pmmn (No. 59), a = 12.162(2); b = 18.058(4); c = 8.657(2) {angstrom}, V = 1901.3(7) {angstrom}{sup 3}, and Z = 2. The structure consists of infinite puckered sheets of vertex-sharing gold tetrahedra (Au{sub 20}) that are tied together by thin layers of alternating four-bonded-Sn and -Au atoms (AuSn{sub 4}). Remarkably, the dense but electron-poorer blocks of Au tetrahedra coexist with more open and saturated Au-Sn layers, which are fragments of a zinc blende type structure that maximize tetrahedral heteroatomic bonding outside of the network of gold tetrahedra. LMTO band structure calculations reveal metallic properties and a pseudogap at 256 valence electrons per formula unit, only three electrons fewer than in the title compound and at a point at which strong Au-Sn bonding is optimized. Additionally, the tight coordination of the Au framework atoms by K plays an important bonding role: each Au tetrahedra has 10 K neighbors and each K atom has 8-12 Au contacts. The appreciably different role of the p element Sn in this structure from that in the triel members in K{sub 3}Au{sub 5}In and Rb{sub 2}Au{sub 3}Tl appears to arise from its higher electron count which leads to better p-bonding (valence electron concentrations = 1.32 versus 1.22).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automated space fabrication of structural elements

A description is presented of an automated space fabrication technique for basic structural elements, taking into account as representative the design loads and requirements of the solar power satellite structure. Roll forming for continuous cap and brace members is applicable for all proposed metallic materials. Spot-welding, electron beam welding, ultrasonic welding, laser welding, cold welding, and various mechanical fastening techniques are applicable for the automated fabrication process. Termination of the formed cap and brace members can be accomplished by sawing, shearing, punching, and laser cutting. The most cost effective materials were found to be the aluminum alloys. Selected for further study were AL20224T3 and AL2219-T62. In the area of fiber composites, thermoplastic matrix materials with graphite fibers were selected for future studies.

Engler, E. E.↗

Synthesis, Structure and Dehydrogenation of Magnesium Amidoborane Monoammoniate

Magnesium amidoborane monoammoniate (Mg(NH2BH3)2 NH3) which crystallizes in a monoclinic structure (space group P21/a) has been synthesized by reacting MgNH with NH3BH3. Dihydrogen bonds are established between coordinated NH3 and BH3 of [NH2BH3] in the structure, promoting stoichiometric conversion of NH3 to H2. T. A. and A. K. acknowledge support from US DoE EERE CHS CoE. The high-field NMR experiments described here were carried out in the Environmental Molecular Science Laboratory, a national scientific user facility sponsored by the US Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antenna systems requirements definition study

A plan to use a 55m wrap rib antenna in a second generation land mobile satellite service application as a specific mission to define a large space structure technology system and its interfaces is described. The system design aims to examine the launch phase of the mission including interface with the space transportation system and the orbital transfer vehicle, and the deployment from the spacecraft of the boom, antennas, and solar panels. Methods for determining the effect of system configuration on the interfaces and of the space environment and operational events on the system and its subsystem interfaces are discussed.

Golden, C. T.↗

Study of robotics systems applications to the space station program

Applications of robotics systems to potential uses of the Space Station as an assembly facility, and secondarily as a servicing facility, are considered. A typical robotics system mission is described along with the pertinent application guidelines and Space Station environmental assumptions utilized in developing the robotic task scenarios. A functional description of a supervised dual-robot space structure construction system is given, and four key areas of robotic technology are defined, described, and assessed. Alternate technologies for implementing the more routine space technology support subsystems that will be required to support the Space Station robotic systems in assembly and servicing tasks are briefly discussed. The environmental conditions impacting on the robotic configuration design and operation are reviewed.

Fox, J. C.↗

Experimental Verification of Identification Algorithms for Control of Flexible Structures

An on going simple laboratory experiment, referred to as the Beam Control Experiment (BCE) is described which has the essential features of a large flexible structure. The experiment is used to develop and evaluate identification and control algorithms which lock promising in the active control of high performance large space structures. Some results on the maximum likelihood identification of the parameters of the beam actuator sensor assembly from experimental data is presented.

Sridher, B.↗

Flight Dynamics Laboratory overview

The Flight Dynamics Laboratory (FDL) is one of four Air Force Wright Aeronautical Laboratories (AFWAL) and part of the Aeronautical Systems Division located at Wright-Patterson AFB, Ohio. The FDL is responsible for the planning and execution of research and development programs in the areas of structures and dynamics, flight controls, vehicle equipment/subsystems, and aeromechanics. Some of the areas being researched in the four FDL divisions are as follows: large space structures (LSS) materials and controls; advanced cockpit designs; bird-strike-tolerant windshields; and hypersonic interceptor system studies. Two of the FDL divisions are actively involved in programs that deal directly with LSS control/structures interaction: the Flight Controls Division and the Structures and Dynamics Division.

Sandford, Thaddeus↗

Multilevel optimization using a continuum model for structures

The new concept of using a continuum model in the multilevel decomposition of structural optimization problems is presented. The practicality of this concept is demonstrated by application in a scheme for the optimization of beam-like space structures. This scheme is tested against traditional optimization procedures for savings in computational cost. Results from both optimization methods are presented for comparison.

Yates, K.↗

Validation of a unique concept for a low-cost, lightweight space-deployable antenna structure

An experiment conducted in the framework of a NASA In-Space Technology Experiments Program based on a concept of inflatable deployable structures is described. The concept utilizes very low inflation pressure to maintain the required geometry on orbit and gravity-induced deflection of the structure precludes any meaningful ground-based demonstrations of functions performance. The experiment is aimed at validating and characterizing the mechanical functional performance of a 14-m-diameter inflatable deployable reflector antenna structure in the orbital operational environment. Results of the experiment are expected to significantly reduce the user risk associated with using large space-deployable antennas by demonstrating the functional performance of a concept that meets the criteria for low-cost, lightweight, and highly reliable space-deployable structures.

Freeland, R. E.↗

New type of incommensurate magnetic ordering in Mn{sub 3}TeO{sub 6}

Highlights: {yields} Mn{sub 3}TeO{sub 6} has a corundum related structure and orders magnetically below 23 K. {yields} The magnetic structure consists of several types of Mn-chains. {yields} The unique Mn site is split into two magnetically different orbits. {yields} One orbit forms a perfect helix with the spiral axis along the c-axis. {yields} The other orbit has a sine wave character along the c-axis. -- Abstract: The complex metal oxide Mn{sub 3}TeO{sub 6} exhibits a corundum related structure and has been prepared both in forms of single crystals by chemical transport reactions and of polycrystalline powders by a solid state reaction route. The crystal structure and magnetic properties have been investigated using a combination of X-ray and neutron powder diffraction, electron microscopy, calorimetric and magnetic measurements. At room temperature this compound adopts a trigonal structure, space group R3{sup -bar} with a = 8.8679(1) A, c = 10.6727(2) A. A long-range magnetically ordered state is identified below 23 K. An unexpected feature of this magnetic structure is several types of Mn-chains. Under the action of the incommensurate magnetic propagation vector k = [0, 0, 0.4302(1)] the unique Mn site is split into two magnetically different orbits. One orbit forms a perfect helix with the spiral axis along the c-axis while the other orbit has a sine wave character along the c-axis.

36 MATERIALS SCIENCE↗

Resonance testing of space shuttle thermoacoustic structural specimen

The resonance testing of a structural specimen related to the space shuttle vehicle is described. The specimen consisted of a thin aluminum skin reinforced by hat-section stringers and supported by two ribs or bulkheads of corrugated web. A representative section of the space shuttle thermal protection system was bonded to the outer surface of the skin. The tests were completed by using miniature accelerometers to collect vibration data from locations forming a predetermined mesh over the tiles and base structure. The signals were recorded on FM magnetic tape and subsequently analyzed on a modal analysis system.

Abrahamson, A. L.↗

Coherent states, quantum gravity, and the Born-Oppenheimer approximation. III.: Applications to loop quantum gravity

In this article, the third of three, we analyse how the Weyl quantisation for compact Lie groups presented in the second article of this series fits with the projective-phase space structure of loop quantum gravity-type models. Thus, the proposed Weyl quantisation may serve as the main mathematical tool to implement the program of space adiabatic perturbation theory in such models. As we already argued in our first article, space adiabatic perturbation theory offers an ideal framework to overcome the obstacles that hinder the direct implementation of the conventional Born-Oppenheimer approach in the canonical formulation of loop quantum gravity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonicosahedral boron allotrope synthesized at high pressure and high temperature

Theoretical predictions of pressure-induced phase transformations often become long-standing enigmas because of limitations of contemporary available experimental possibilities. Hitherto the existence of a nonicosahedral boron allotrope has been one of them. Here we report on a nonicosahedral boron allotrope, which we denoted as ζ -B, with the orthorhombic α-Ga-type structure (space group Cmce) synthesized in a diamond-anvil cell at extreme high-pressure high-temperature conditions (115 GPa and 2100 K). The structure of ζ -B was solved using single-crystal synchrotron x-ray diffraction and its compressional behavior was studied in the range of very high pressures (115–135 GPa). Here,experimental validation of theoretical predictions reveals the degree of our up-to-date comprehension of condensed matter and promotes further development of solid-state physics and chemistry.

36 MATERIALS SCIENCE↗

Modeling and stabilization of large flexible space stations

A preliminary formulation of a large space structure is presented. The system consists of a (rigid) massive body, which may play the role of experimental modules located at the center of the space station and a flexible configuration, consisting of several beams, which is rigidly attached to the main body. The equations that govern the motion of the complete system consist of several partial differential equations with boundary conditions describing the vibration of flexible components coupled with six ordinary differential equations that describe the rotational and translational motion of the central body. The problem of (feedback) stabilization of the system is discussed. This study is expected to provide an insight into the complexity of design and stabilization of actual space stations.

Lim, S. S.↗

Information management in an integrated space telerobot

The in-orbit operations, like space structures inspection, servicing and repairing, is expected to be one of the most significant technological area for application and development of Robotics and Automation in Space Station environment. The Italian National Space Plan (PSN) has started up its strategic programme SPIDER (Space Inspection Device for Extravehicular Repairs), which is scheduled in three phases, with the final goal of performing docking and precision repairing in the Space Station environment. SPIDER system is an autonomous integrated space robot, using mature Artificial Intelligence tools and technics for its operational control. The preliminary results of a study on the information architecture of the spacecraft are described.

Dipippo, S.↗

Bi-axial Strain Measurement of Woven-Webbing Inflatable Structures Using Digital Image Correlation with RGB Filtering

Crewed inflatable softgoods structures can significantly reduce launch volume for habitable pressure vessels. To ensure the operational safety of these structures, NASA has developed an extensive testing program to evaluate the structural capability on ground test articles. This paper will discuss a current challenge faced by test engineers evaluating the strain of large-scale inflatable space structures during ground testing. Namely, the difficulty that arises using monochrome digital image correlation (DIC) to evaluate bi-axial strain for woven-webbing restraint layers. This report provides insight into a novel method of photogrammetry using red-green-blue (RGB) filtering in conjunction with DIC to evaluate the strain in each direction on a test article experiencing bi-directional strain. To evaluate this concept, a uniaxial tensile test was performed that represented a biaxial woven architecture using orthogonally interfaced straps. The resulting analysis demonstrates promise for this novel approach for isolating a specific region and direction of strain, reducing the effects of straps not in the area of interest, while allowing for a larger region of analysis. Moreover, it was shown that the application of a white basecoat prior to applying photogrammetry patterns significantly reduced data loss while performing RGB filtered DIC.

inflatable↗

Buckling and vibration of periodic lattice structures

Lattice booms and platforms composed of flexible members or large diameter rings which may be stiffened by cables in order to support membrane-like antennas or reflector surfaces are the main components of some large space structures. The nature of these structures, repetitive geometry with few different members, makes possible relatively simple solutions for buckling and vibration of a certain class of these structures. Each member is represented by a stiffness matrix derived from the exact solution of the beam column equation. This transcendental matrix gives the current member stiffness at any end load or frequency. Using conventional finite element techniques, equilibrium equations can be written involving displacements and rotations of a typical node and its neighbors. The assumptions of a simple trigonometric mode shape is found to satisfy these equations exactly; thus the entire problem is governed by just one 6 x 6 matrix equation involving the amplitude of the displacement and rotation mode shapes. The boundary conditions implied by this solution are simple supported ends for the column type configurations.

Anderson, M. S.↗