Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spatial Generative Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Capacity Expansion Planning for LA Basin: the Role of Energy Storage

The paper evaluates the deployment of energy storage to support equitable energy outcomes and the clean energy transition in the Los Angeles Basin (LAB). The deployment of energy storage is considered in a 10 zone capacity expansion planning model from 2022-2045. The model is based on the California Public Utility Commission’s 7 zone RESOLVE model but has been modified to give greater spatial granularity in the LAB area by addig 3 new zones representing the Eastern Los Angeles, Western Los Angeles and the El Nido subzones. Three different scenarios are studied in this work; a base case with no natural gas retirements in the LAB, and two cases exploring extreme natural gas retirements, where the 8GW of natural gas belonging to the LAB are retired by 2045. Study results indicate that storage can play a significant role in helping the LAB meeting its energy requirements. However, when considering extreme retirement scenarios, either new generation (such as solar) or capacity (such as new import capacity via transmission lines) will likely be needed to serve projected system loads.

Maloney, Patrick R.↗
NASA NTRS1991

The structure of Io's corona

A spatial profile of the distribution of sodium in Io's corona has been constructed using measurements obtained during satellite mutual eclipses. The data reveal a fairly symmetric corona whose density falls steeply from the surface out to 6 r(Io) and more slowly outside. An upper limit of 700 km is placed on the exobase altitude, but the observations do not constrain the surface density. Several theoretical models adequately match some traits of the corona, but none satisfies all the observations. No strong upstream/downstream asymmetry of the corona is observed, so it is unlikely that the corona is primarily generated by the impact of corotating ions into the trailing hemisphere.

Schneider, N. M.↗
NASA NTRS1999

Computation of Steady and Unsteady Laminar Flames: Theory

In this paper we describe the numerical analysis underlying our efforts to develop an accurate and reliable code for simulating flame propagation using complex physical and chemical models. We discuss our spatial and temporal discretization schemes, which in our current implementations range in order from two to six. In space we use staggered meshes to define discrete divergence and gradient operators, allowing us to approximate complex diffusion operators while maintaining ellipticity. Our temporal discretization is based on the use of preconditioning to produce a highly efficient linearly implicit method with good stability properties. High order for time accurate simulations is obtained through the use of extrapolation or deferred correction procedures. We also discuss our techniques for computing stationary flames. The primary issue here is the automatic generation of initial approximations for the application of Newton's method. We use a novel time-stepping procedure, which allows the dynamic updating of the flame speed and forces the flame front towards a specified location. Numerical experiments are presented, primarily for the stationary flame problem. These illustrate the reliability of our techniques, and the dependence of the results on various code parameters.

Hagstrom, Thomas↗
DOE OSTI2019

Thermodynamic analysis and atomistic modeling of subsurface cavitation in photomechanical spallation

According to the article, the thermodynamic conditions defining the spatial extent of a subsurface region affected by the nucleation and growth of voids in photomechanical spallation of metals is investigated theoretically and in atomistic simulations. A theoretical analysis of cavitation in a surface region of a target melted by laser irradiation suggests a functional form for the temperature dependence of the cavitation threshold. A series of small-scale molecular dynamics simulations performed for Al, Ag, Cr, and Ni has revealed the minimum value of the free energy barrier that results in the onset of cavitation on the timescale of 10s of ps, which is a typical duration of transient tensile stresses produced by the unloading wave generated in the spallation regime. The predictive ability of the theoretical description is verified in large-scale simulations of photomechanical spallation of a Ni target and ablation of an Al target in the phase explosion regime. The temporal and spatial evolution of the free energy barrier for the onset of cavitation under conditions of short pulse laser processing is shown to univocally define the region where the nucleation of voids takes place.

Materials Science↗
DOE OSTI2025

Wind Turbine Sound Setbacks and Supply Curves: Ordinances and Extrapolated Trends, 110 Hub Height, 130 Rotor Diameter

This dataset provides a comprehensive set of wind turbine sound setbacks from every residential structure in the contiguous United States (CONUS). A sound setback is defined as the minimum required distance between a residential structure and a hypothetical turbine installation site to ensure that modeled sound levels received at the residence do not exceed local sound ordinances, which are commonly expressed in A-weighted decibels (dBA). Therefore, sound setbacks are a local spatial assessment combining multiple factors, including the sound pressure curve as a function of the observer location (distance and direction) relative to the turbine, local sound regulations, and the geographical distribution of residential structures. The dataset is organized into multiple scenario-based products, detailed as follows: 1. Existing and extrapolated sound setbacks. An existing scenario characterizes sound setbacks only in states or counties that have implemented sound regulations as of 2022. The extrapolated scenarios extend a constant sound threshold to counties that lack explicit sound regulations, with thresholds ranging from 35 to 60 dBA, in 5-dBA increments reflecting the variation observed in current sound ordinances. 2. Sound setbacks in directional and worst scenarios. The directional scenario accounts for the distance and orientation of residential structures relative to a hypothetical turbine location, utilizing the turbine's sound emissions in that specific direction. In contrast, the worst scenario takes loudest sound level at each distance step from the turbine, irrespective of directional considerations, which aligns with current industry practice. 3. Supply curves for Open and Reference Access scenarios. This dataset includes supply curves generated by the reV model, which integrates each of the above sound setbacks into both Open and Reference siting scenarios. In addition, two Open and Reference baselines scenarios were included which do not consider sound setbacks for comparative analysis. All sound setback data are stored in TIF files, with partial maps of the data provided in PNG format. The values in the sound setback raster range from 0 to 1, representing the fraction of developable land within a 90 meter by 90 meter pixel due to sound ordinances. A value of 0 indicates areas where wind energy development is prohibited, while a value of 1 signifies areas fully permissible. The wind turbine parameters used in the sound modeling are based on the land-based turbine from International Energy Agency (IEA), featuring a rated electrical power of 3.4 MW, a rotor diameter of 130 meters, and a hub height of 110 meters. The atmospheric conditions, including wind speed/direction, turbulence, air temperature, relative humidity, and air pressure, that drive the sound generation are obtained from the WIND Toolkit dataset.

Array↗
DOE OSTI2017

Measurement and simulation of the temperature evolution of a short pulse laser heated buried layer target

Short pulse laser heated buried layers experiments have been performed on the Orion laser facility to study the time-resolved emission characteristics of plasmas with mass densities ≥ 1 g/cc and electron temperatures > 500 eV. Our streak camera measurements focused on the K-shell emission lines of He-like and H-like aluminum from a buried aluminum layer. The data were analyzed by comparison to synthetic spectra generated with the non-local thermodynamic equilibrium (NLTE) radiation transfer code Cretin, which yielded maximum temperatures of nearly 800 eV at near solid density. The time precise history of the temperature evolution was reproduced with a 1-D radiation hydrodynamic code; however, the known effect of lateral transport of energy out of the focal spot made exacting agree with theory difficult. Furthermore, we have observed densities of ≥ 1 g/cc and temperatures of > 500 eV using the 1-D analysis, which supports the idea that the aluminum plasma is locally hotter than inferred from our spatially integrating measurements and that modeling requires the inclusion of 2-dimensional effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Understanding the hydrological response of a headwater-dominated catchment by analysis of distributed surface–subsurface interactions

Abstract We computationally explore the relationship between surface–subsurface exchange and hydrological response in a headwater-dominated high elevation, mountainous catchment in East River Watershed, Colorado, USA. In order to isolate the effect of surface–subsurface exchange on the hydrological response, we compare three model variations that differ only in soil permeability. Traditional methods of hydrograph analysis that have been developed for headwater catchments may fail to properly characterize catchments, where catchment response is tightly coupled to headwater inflow. Analyzing the spatially distributed hydrological response of such catchments gives additional information on the catchment functioning. Thus, we compute hydrographs, hydrological indices, and spatio-temporal distributions of hydrological variables. The indices and distributions are then linked to the hydrograph at the outlet of the catchment. Our results show that changes in the surface–subsurface exchange fluxes trigger different flow regimes, connectivity dynamics, and runoff generation mechanisms inside the catchment, and hence, affect the distributed hydrological response. Further, changes in surface–subsurface exchange rates lead to a nonlinear change in the degree of connectivity—quantified through the number of disconnected clusters of ponding water—in the catchment. Although the runoff formation in the catchment changes significantly, these changes do not significantly alter the aggregated streamflow hydrograph. This hints at a crucial gap in our ability to infer catchment function from aggregated signatures. We show that while these changes in distributed hydrological response may not always be observable through aggregated hydrological signatures, they can be quantified through the use of indices of connectivity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Modeling the effects of molecular disorder on the properties of Frenkel excitons in organic molecular semiconductors

The Frenkel exciton model offers a convenient framework for simulating electronic excitations in organic conjugated systems that are too large to address with atomistic level electronic structure methods. Parameterization of this model is typically based on analytical expressions that incompletely describe the spatial and temporal correlations that are inherent to many condensed phase molecular systems. In this manuscript, we introduce a general procedure for including these correlations in the Frenkel exciton model, by mapping them directly from all-atom molecular configurations, for instance from classical molecular dynamics. Regardless of system morphology, this mapping automatically captures the spatial and temporal molecular correlations that are otherwise difficult or impossible to represent in terms of low-dimensional correlation functions. We apply this procedure to study the excited state properties of condensed phase materials made up of thiophene oligomers. We demonstrate that Frenkel model parameters can be mapped from a series of single molecule electronic structure calculations, and that for these materials efficient semi-empirical methods are sufficient to accurately reproduce experimental spectral measurements. By analyzing the statistics of model parameters derived from materials with different characteristic morphologies, we highlight failures in some assumptions that are commonly applied when generating model parameters. Finally, by simulating exciton dynamics on a mapped Frenekel exciton model, we demonstrate the ability to quantify the effect of material morphology on the dynamic properties of excitons.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

WHONDRS River Corridor Sediment and Water Geochemistry and In Situ Sensor Data from Machine-Learning-Informed Sites across the Contiguous United States (v6)

This dataset supports a broader study examining hyporheic zone respiration rates to improve predictive models at a contiguous United States (CONUS) scale. The CONUS-Scale Model-Sample Study (CM) was designed following ICON (integrated, coordinated, open, and networked) principles to facilitate a model-experiment (ModEx) iteration approach, leveraging crowdsourced sampling across the CONUS. New machine learning models were created every month to guide sampling locations. Data from the resulting samples were used to test and rebuild the machine learning models for the next round of sampling guidance. Sampling began in April 2022 and ended in October 2023. In addition to the widely distributed CONUS sites, a more spatially focused sampling occurred in the Yakima River Basin, WA in summer 2022. Data from this more spatially intensive sampling occurred under the label “Second Spatial Study (SSS)” and were also included in the machine learning models. Other data types collected from SSS that were not part of CM were published in a separate data package (https://data.ess-dive.lbl.gov/view/doi:10.15485/1969566). This data package was originally published in February 2023. It was updated in June 2023 (v2; new and modified files); December 2023 (v3; new and modified files); June 2024 (v4; new and modified files); April 2024 (v5; new and modified files); and September 2025 (v6; modified files). See the change history section in the readme for more details. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. This dataset is comprised of two folders of field photos and videos, one folder of raw Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) data and one main data folder containing (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) readme; (5) international generic sample number (IGSN) mapping file; (6) field protocols; (7) a subfolder with sample data; and (8) a subfolder with sensor data. The sample data subfolder contains (1) surface water and sediment dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data and averages; (2) surface water and sediment total nitrogen data and averages; (3) surface water major cations and anions and averages; (4) sediment grain size data; (5) sediment iron (II) data and averages; (6) wet sediment mass, dry sediment mass, water mass, and wet sediment volume in incubation and sediment ICR vials; (7) sediment incubation respiration rate data and averages; (8) normalized respiration rate data and averages; (9) methods codes; (10) sediment specific surface area; (11) sediment percent carbon and nitrogen; (12) sediment gravimetric moisture and averages; (15) sediment X-ray diffraction (XRD) data; (16) sediment adenosine triphosphate (ATP) and averages; (17) a subfolder with sediment incubation respiration data, scripts, and plots; (18) surface water and sediment FTICR methods; and (19) a subfolder of 9.4 Tesla (9.4T) FTICR-MS data. This folder contains five subfolders, one containing the sediment .xml data files, one containing the water .xml files, one containing the sediment CoreMS output files, one containing the water CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS).The sensor data subfolder contains (1) a subfolder with miniDOT dissolved oxygen and temperature data and plots; (2) miniDOT dissolved oxygen and temperature summary data; and (3) miniDOT installation methods. All files are .csv, .pdf, .R, .xml, .d, .html, .Rmd, .py, .cal, .json, .jpg, .jpeg, .png, .mov, or .mp4. CORRECTION: Carbon and nitrogen content are reported as percentages. The current column headers "01395_C_percent_per_mg" and "01397_N_percent_per_mg" are incorrect. These should read "01395_C_percent" and "01397_N_percent" and will be corrected in the next version of this data package. We thank the United States Forest Service, Washington Department of Fish and Wildlife, Washington Department of Natural Resources, Cowiche Canyon Conservatory, Washington State Parks and Recreation Commission (Scientific Research Permit #210901), and the Confederated Tribes and Bands of the Yakama Nation for access to field locations where the samples labeled “SSS” were collected. We also thank the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview. WHONDRS consortium members were asked to provide any acknowledgments for the collection of samples labeled “CM” and the following is a list of acknowledgments that were submitted with their corresponding Site IDs: (MART) Research activities were conducted in part on the Wind River Experimental Forest within the Gifford Pinchot National Forest; (MP- 100379) Philadelphia is part of Lenapehoking, the ancestral homelands of the Lenape peoples; (MP-102398) Land surveyed is the ancestral homelands of the Nookhose'iinenno (Arapaho), Tsis tsis'tas (Cheyenne), and Nuuchu (Ute); (MP-100749 and MP- 100747) Georgia Coastal Ecosystem LTER, OCE-1832178; (SP-70 and SP-72) Eastern Shoshone, Shoshone-Bannock; (MP- 102944) Funded by Oregon Watershed Enhancement Board. On the traditional lands of the Confederated Tribes of the Siletz, Confederated Tribes of the Grand Rhonde, and the Clatsop-Nehalem Confederated Tribe; (MP- 100607) Holiday Creek is located on the traditional territory of the Monacan Indian Nation; (SP-45) Lafayette Blue Springs State Park; (MP-102420) NSF DEB-2016749; (MP-100019) New Hampshire Agriculture Experiment Station; (SP-35) Rayonier (land owner; https://www.rayonier.com/); (MP- 101276) US Department of Energy, Office of Science, Biological and Environmental Research, Subsurface Biogeochemical Research, Watershed Dynamics and Evolution SFA at ORNL; (MP- 103224) Watershed Dynamics and Evolution SFA at ORNL; (MP- 101584) Traditional lands of the Oceti Sakowin (Dakota, Lakota, Nakoda) and Anishinaabe Peoples.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1975

Wave theory of turbulence in compressible media (acoustic theory of turbulence)

The generation and the transmission of sound in turbulent flows are treated as one of the several aspects of wave propagation in turbulence. Fluid fluctuations are decomposed into orthogonal Fourier components, with five interacting modes of wave propagation: two vorticity modes, one entropy mode, and two acoustic modes. Wave interactions, governed by the inhomogeneous and nonlinear terms of the perturbed Navier-Stokes equations, are modeled by random functions which give the rates of change of wave amplitudes equal to the averaged interaction terms. The statistical framework adopted is a quantum-like formulation in terms of complex distribution functions. The spatial probability distributions are given by the squares of the absolute values of the complex characteristic functions. This formulation results in nonlinear diffusion-type transport equations for the probability densities of the five modes of wave propagation.

Kentzer, C. P.↗
NASA NTRSDate not supplied

Characterizing Spatiotemporal Uncertainty in Interpolated Meteorological Data

Interpolated meteorological data invariably contain errors. These errors have structure in time and space, particularly autocorrelation, which can cause the effects of errors to compound when model outputs are aggregated temporally or spatially. One way to account for this uncertainty is with a probabilistic model from which samples can be drawn that are coherent with respect to underlying spatial and temporal covariance structure. This work describes a probabilistic method for spatial interpolation of point-wise meteorological time series. Observational data from weather stations are generally sparse in space and dense in time (but sometimes missing). The method works by projecting time series onto orthogonal basis vectors and spatially interpolating each resulting component independently. Under suitable assumptions, and data transformations to better satisfy those assumptions, Gaussian process regression provides a complete description of the joint predictive distribution over a Gaussian random field. Spatiotemporally coherent realizations are generated as the sum of conditional (spatial) simulations of each orthogonal (temporal) component. Data-derived and generic orthogonal bases are considered. In addition to spatial interpolation, imputation of missing observational data is examined. The method is applied using near-surface air temperature over the Western United States and validated by comparing theoretical versus actual coverage of predictive distributions and analyzing the degree to which spatial and temporal covariance structure is reproduced. Computational considerations, relating to conditional simulation of random fields, are also addressed.

Conor T Doherty↗
DOE OSTI2021

Simulation of PV Variability as a Function of PV Generation and Plant Size: Preprint

The deployment of photovoltaic (PV) systems continues to show significant expansion; however, this growth has brought added attention to issues around the variability of the solar resource. Both spatial and temporal variability exist. Temporal scales can range from the sub-second to multiyear, whereas spatial scales can range from a few meters to tens of kilometers. There are multiple methods described in the literature to quantify PV variability at various spatial and temporal scales. This study focuses on short-term temporal variability and uses similar approaches with the addition of PV plant size a parameter to quantify variability. The method employed here incorporates the normalization of clear- and cloudy-sky conditions and PV plant size to quantify nominal variability metrics. The distribution and fluctuations of these metrics provide relevant information that is useful for system operations. The National Solar Radiation Database (NSRDB) is used to simulate PV variability as a function of PV generation and plant size. Hypothetical but realistic system information at 33 locations is used to model PV generation by feeding NSRDB solar irradiance data to the National Renewable Energy Laboratory’s System Advisor Model (SAM). Over the selected region, it is found that the aggregated ramp rates for the 1-minute data are associated with standard deviations ranging from 0.002–0.055 on a daily basis; however, hourly intervals induce higher aggregated ramp rates than the other timescales. Even though minute-to-minute variations are significant for the 1-minute timescale, the standard deviation aggregated into a daily metric is smaller because of the cancellation of values.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2026

Ecological connectivity and habitat loss shape patterns of genetic diversity in a threatened salamander

Context The maintenance of genetic diversity is essential for preserving adaptive potential in populations, yet it is increasingly threatened by landscape alteration. The field of landscape genetics offers a framework for assessing how patch-level landscape conditions, modeled at multiple scales, influence genetic diversity. Objectives We sought to assess how local environmental features and connectivity influence genetic diversity across 74 four-toed salamander (Hemidactylium scutatum) breeding wetlands in the southeastern United States. Methods Using next-generation sequencing data and hierarchical Bayesian models, we examined genome-wide heterozygosity in relation to local landscape features and ecological connectivity. We also assessed the scale of effect of landscape features and tested for temporal lag effects. Results Genetic diversity was lower in wetlands with higher levels of historic deforestation and lower connectivity. An interaction between deforestation and connectivity indicated that deforestation had stronger negative effects in isolated wetlands but weaker effects in well-connected wetlands. Accounting for scale of effect and temporal lags was critical for detecting these relationships. Conclusions Our analyses highlight the importance of assessing the spatial scale (scale of effect) and temporal lag of landscape features to detect key drivers of genetic diversity. In line with population genetic theory, our results indicate that the genetic consequences of habitat loss do not affect populations uniformly and are most severe in isolated populations where gene flow cannot buffer against loss of diversity. Altogether, we highlight the importance of considering the interaction of habitat loss and connectivity in conservation genetic management.

Hemidactylium scutatum↗
DOE OSTI2017

Experimental and Theoretical Study of Azimuth Angle and Polarization Dependences of Sum-Frequency-Generation Vibrational Spectral Features of Uniaxially Aligned Cellulose Crystals

Comprehensive interpretation of vibrational sum-frequency-generation (SFG) spectroscopic features of SFG-active nanodomains interspersed in amorphous bulk requires the knowledge of nonlinear susceptibility, χ ijk (2) , of the SFG-active phase as a function of its spatial arrangement in the bulk as well as the polarizations of the probe lights. Our work reports the full analysis of the azimuth angle and polarization dependence of SFG signals from a control sample consisting of uniaxially aligned cellulose Iβ crystals. The χ ijk (2) terms of cellulose were estimated from quantum mechanics calculations using time-dependent density functional theory (TD-DFT), and a simple structural model was built with truncated glucose dimers. The theoretical azimuth angle and polarization dependences of characteristic CH/CH 2 and OH stretch modes of cellulose were compared with the experimentally observed trends. These comparisons revealed that the relative polarity of crystallites within the SFG coherence length, the random quasi phase-matching of polycrystalline domains, and the preferential packing of crystallites in the bulk play important roles governing the spectral features. Compared to that of small molecules, the difference between chiral and achiral responses in SFG spectra is more difficult to confirm because of the inhomogeneous distribution of crystallites in the bulk sample.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Optically tunable mesoscale CdSe morphologies via inorganic phototropic growth

Inorganic phototropic growth using only spatially conformal illumination generated Se–Cd films that exhibited precise light-defined mesoscale morphologies including highly ordered, anisotropic, and periodic ridge and trench nanotextures over entire macroscopic substrates. Growth was accomplished via a light-induced electrochemical method using an optically and chemically isotropic solution, an unpatterned substrate, and unstructured, incoherent, low-intensity illumination in the absence of chemical directing agents or physical templates and masks. The morphologies were defined by the illumination inputs: the nanotexture long axes aligned parallel to the optical E-field vector, and the feature sizes and periods scaled with the wavelength. Optically based modeling of the growth closely reproduced the experimental results, confirming the film morphologies were fully determined by the light–matter interactions during growth. Solution processing of the Se–Cd films resulted in stoichiometric, crystalline CdSe films that also exhibited ordered nanotextures, demonstrating that inorganic phototropic growth can effect tunable, template-free generation of ordered CdSe nanostructures over macroscopic length scales.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simulation of PV Variability as a Function of PV Generation and Plant Size

The deployment of photovoltaic (PV) systems continues to show significant expansion; however, this growth has brought added attention to issues around the variability of the solar resource. Both spatial and temporal variability exist. Temporal scales can range from the sub-second to multiyear, whereas spatial scales can range from a few meters to tens of kilometers. There are multiple methods described in the literature to quantify PV variability at various spatial and temporal scales. This study focuses on short-term temporal variability and uses similar approaches with the addition of PV plant size a parameter to quantify variability. The method employed here incorporates the normalization of clear-and cloudy-sky conditions and PV plant size to quantify nominal variability metrics. The distribution and fluctuations of these metrics provide relevant information that is useful for system operations. The National Solar Radiation Database (NSRDB) is used to simulate PV variability as a function of PV generation and plant size. Hypothetical but realistic system information at 33 locations is used to model PV generation by feeding NSRDB solar irradiance data to the National Renewable Energy Laboratory’s System Advisor Model (SAM). Over the selected region, it is found that the aggregated ramp rates for the 1-minute data are associated with standard deviations ranging from 0.002–0.055 on a daily basis; however, hourly intervals induce higher aggregated ramp rates than the other timescales. Even though minute-to-minute variations are significant for the 1-minute time-scale, the standard deviation aggregated into a daily metric is smaller because of the cancellation of values.

irradiance↗
NASA NTRS1994

Measurements of striae in CR+ doped YAG laser crystals

Striations in Czochralski (CZ) grown crystals have been observed in materials such as GaAs, silicon, photorefractive crystals used for data storage, potassium titanyl phosphate crystals and LiNbO3. Several techniques have been used for investigating these defects including electron microscopy, laser scanning tomography, selective photoetching, X-ray diffuse scattering, interference orthoscopy, laser interferometry and micro-Fourier transform infrared spectroscopy mapping. A 2mm thick sample of the material to be investigated is illuminated with light that is absorbed and non-absorbed by the ion concentration to be observed. The back surface of the sample is focused onto a solid-state image detector and images of the input beam and absorbed (and diffracted) beams are captured at two wavelengths. The variation of the coefficient of absorption asa function of distance on the sample can be derived from these measurements. A Big Sky Software Beamcode system is used to capture and display images. Software has been written to convert the Beamcode data files to a format that can be imported into a spreadsheet program such as Quatro Pro. The spreadsheet is then used to manipulate and display data. A model of the intensity map of the striae collected by the imaging system has been proposed and a data analysis procedure derived. From this, the variability of the attenuation coefficient alpha can be generated. Preliminary results show that alpha may vary by a factor of four or five over distances of 100 mu m. Potential errors and problems have been discovered and additional experiments and improvements to the experimental setup are in progress and we must now show that the measurement techniques and data analysis procedures provide 'real' information. Striae are clearly visible at all wavelengths including white light. Their basic spatial frequency does not change radically, at least when changing from blue to green to white light. Further experimental and theoretical work can be done to improve the data collection techniques and to verify the data analysis procedures.

Cady, Fredrick M.↗
NASA NTRS1997

Evaluation of GIS Technology in Assessing and Modeling Land Management Practices

There is an increasing concern of land owners to protect and maintain healthy and sustainable agroecosystems through the implementation of best management practices (BMP). The objectives of this study were: (1) To develop and evaluate the use of a Geographic Information System (GIS) technology for enhancing field-scale management practices; (2) evaluate the use of 2-dimensional displays of the landscape and (3) define spatial classes of variables from interpretation of geostatistical parameters. Soil samples were collected to a depth of 2 m at 15 cm increments. Existing data from topographic, land use, and soil survey maps of the Winfred Thomas Agricultural Research Station were converted to digital format. Additional soils data which included texture, pH, and organic matter were also generated. The digitized parameters were used to create a multilayered field-scale GIS. Two dimensional (2-D) displays of the parameters were generated using the ARC/INFO software. The spatial distribution of the parameters evaluated in both fields were similar which could be attributed to the similarity in vegetation and surface elevation. The ratio of the nugget to total semivariance, expressed as a percentage, was used to assess the degree of spatial variability. The results indicated that most of the parameters were moderate spatially dependent Biophysical constraint maps were generated from the database layers, and used in multiple combination to visualize results of the BMP. Understanding the spatial relationships of physical and chemical parameters that exists within a field should enable land managers to more effectively implement BMP to ensure a safe and sustainable environment.

Archer, F.↗