Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Cross-linked structure of network evolution

We study the temporal co-variation of network co-evolution via the cross-link structure of networks, for which we take advantage of the formalism of hypergraphs to map cross-link structures back to network nodes. We investigate two sets of temporal network data in detail. In a network of coupled nonlinear oscillators, hyperedges that consist of network edges with temporally co-varying weights uncover the driving co-evolution patterns of edge weight dynamics both within and between oscillator communities. In the human brain, networks that represent temporal changes in brain activity during learning exhibit early co-evolution that then settles down with practice. Subsequent decreases in hyperedge size are consistent with emergence of an autonomous subgraph whose dynamics no longer depends on other parts of the network. Our results on real and synthetic networks give a poignant demonstration of the ability of cross-link structure to uncover unexpected co-evolution attributes in both real and synthetic dynamical systems. This, in turn, illustrates the utility of analyzing cross-links for investigating the structure of temporal networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic field sensor based on cascaded microfiber coupler with magnetic fluid

A kind of magnetic field sensor based on cascaded microfiber coupler with magnetic fluid is proposed and experimentally demonstrated. The magnetic fluid is utilized as the cladding of the fused regions of the cascaded microfiber coupler. As the interference valley wavelength of the sensing structure is sensitive to the ambient variation, considering the magnetic-field-dependent refractive index of magnetic fluid, the proposed structure is employed for magnetic field sensing. The effective coupling length for each coupling region of the as-fabricated cascaded microfiber coupler is 6031 μm. The achieved sensitivity is 125 pm/Oe, which is about three times larger than that of the previously similar structure based on the single microfiber coupler. Experimental results indicate that the sensing sensitivity can be easily improved by increasing the effective coupling length or cascading more microfiber couplers. The proposed magnetic field sensor is attractive due to its low cost, immunity to electromagnetic interference, as well as high sensitivity, which also has the potentials in other tunable all-fiber photonic devices, such as filter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A comment on the position dependent diffusion coefficient representation of structural heterogeneity

Experimental studies of the variation of the mean square displacement (MSD) of a particle in a confined colloid suspension that exhibits density variations on the scale length of the particle diameter are not in agreement with the prediction that the spatial variation in MSD should mimic the spatial variation in density. The predicted behavior is derived from the expectation that the MSD of a particle depends on the system density and the assumption that the force acting on a particle is a point function of position. The experimental data are obtained from studies of the MSDs of particles in narrow ribbon channels and between narrowly spaced parallel plates and from new data, reported herein, of the radial and azimuthal MSDs of a colloid particle in a dense colloid suspension confined to a small circular cavity. In each of these geometries, a dense colloid suspension exhibits pronounced density oscillations with spacing of a particle diameter. We remove the discrepancy between prediction and experiment using the Fisher-Methfessel interpretation of how local equilibrium in an inhomogeneous system is maintained to argue that the force acting on a particle is delocalized over a volume with radius equal to a particle diameter. Our interpretation has relevance to the relationship between the scale of inhomogeneity and the utility of translation of the particle MSD into a position dependent diffusion coefficient and to the use of a spatially dependent diffusion coefficient to describe mass transport in a heterogeneous system.

74 ATOMIC AND MOLECULAR PHYSICS↗

Making on-orbit structural repairs to Space Station

One of the key factors dictating the safety and durability of the proposed U.S. Space Station is the ability to repair structural damage while remaining in orbit. Consequently, studies are conducted to identify the engineering problems associated with accomplishing structural repairs on orbit, due to zero gravity environment and exposure to extreme temperature variations. There are predominant forms of structural failure, depending on the metallic or composite material involved. Aluminum is the primary metallic material used in space vehicle applications. Welding processes on aluminum alloy structures were tested, resulting in final selection of electron beam welding as the primary technique for metallic material repair in Space. Several composite structure repair processes were bench-tested to define their applicability to on-orbit EVA requirements: induction heating prevailed. One of the unique problems identified as inherent in the on-orbit repair process is that of debris containment. The Maintenance Work Station concept provides means to prevent module contamination from repair debris and ensure the creation of a facility for crew members to work easily in a microgravity environment. Different technologies were also examined for application to EVA repair activities, and the concept selected was a spring-loaded, collapsible, box-like Debris Containement and Collection Device with incorporated fold-down tool boards and handholes in the front panel.

Haber, Harry S.↗

Probabilistic Structural Analysis Methods (PSAM) for Select Space Propulsion System Components

Probabilistic Structural Analysis Methods (PSAM) are described for the probabilistic structural analysis of engine components for current and future space propulsion systems. Components for these systems are subjected to stochastic thermomechanical launch loads. Uncertainties or randomness also occurs in material properties, structural geometry, and boundary conditions. Material property stochasticity, such as in modulus of elasticity or yield strength, exists in every structure and is a consequence of variations in material composition and manufacturing processes. Procedures are outlined for computing the probabilistic structural response or reliability of the structural components. The response variables include static or dynamic deflections, strains, and stresses at one or several locations, natural frequencies, fatigue or creep life, etc. Sample cases illustrates how the PSAM methods and codes simulate input uncertainties and compute probabilistic response or reliability using a finite element model with probabilistic methods.

Source record↗

Comprehensive Forced Response Analysis of J2X Turbine Bladed-Discs with 36- Degree Variation in CFD Loading

At NASA/MSFC, Structural Dynamics personnel continue to perform advanced analysis for the turbomachinery in the J2X Rocket Engine, which is under consideration for the new Space Launch System. One of the most challenging analyses in the program is predicting turbine blade structural capability. Resonance was predicted by modal analysis, so comprehensive forced response analyses using high fidelity cyclic symmetric finite element models were initiated as required. Analysis methodologies up to this point have assumed the flow field could be fully described by a sector, so the loading on every blade would be identical as it travelled through it. However, in the J2X the CFD flow field varied over the 360 deg of a revolution because of the flow speeds and tortuous axial path. MSFC therefore developed a complex procedure using Nastran Dmap's and Matlab scripts to apply this circumferentially varying loading onto the cyclically symmetric structural models to produce accurate dynamic stresses for every blade on the disk. This procedure is coupled with static, spin, and thermal loading to produce high cycle fatigue safety factors resulting in much more accurate analytical assessments of the blades.

Elrod, David↗

Seasonality regulates the structure and biogeochemical impact of ectomycorrhizal fungal communities across environmentally divergent neotropical dry forests

Abstract Ectomycorrhizal (ECM) symbioses support forest functioning globally, yet both the structure and function of ECM fungal communities in seasonally dry neotropical forests (SDTFs), known for extreme heterogeneity in vegetation and edaphic properties, remain under characterized. Here, we evaluated the relative influences of seasonal versus spatial variation in ECM fungal community structure in soils from four environmentally divergent SDTFs. We also assessed the importance of biotic and abiotic drivers of SDTF ECM fungal community structure at regional scales, as well as ECM impacts on soil carbon (C) and nitrogen (N) cycling. ECM fungal frequency, relative abundance and richness all increased in the wet season, but spatial rather than seasonal effects explained more variation in community composition. Across the four SDTFs investigated, differences in tree communities drove ECM fungal community turnover more than geographic distances, site abiotic conditions or soil chemistry. Although soil moisture and ECM tree basal area were stronger predictors of soil biogeochemistry, incorporating ECM fungal community composition and relative abundance added explanatory power to models of soil C and N cycling in the wet season. Synthesis : Our results highlight the importance of seasonality and plant community composition in shaping different aspects of SDTF ECM fungal community structure and diversity as well as the potential for both the plant and fungal components of ECM symbioses to impact soil functioning across heterogenous SDTFs. Furthermore, our findings suggest that alterations in SDTF plant community composition due to climate or land‐use change will have important consequences for ECM fungal diversity and associated effects on soil biogeochemical cycling.

54 ENVIRONMENTAL SCIENCES↗

Structural analysis of emerging ferrite: Doped nickel zinc ferrite

Ni{sub 0.6-x}Zn{sub 0.4}Co{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.033, 0.264) nanoparticles were synthesized by sol-gel method and annealed at 900°C. Structural properties of all prepared samples were examined with X-ray diffraction (XRD). The partial formation of hematite (α-Fe{sub 2}O{sub 3}) secondary phase with spinel phase cubic structure of undoped and cobalt doped nickel zinc ferrite was found by XRD peaks. The variation in crystallite size and other structural parameters with cobalt doping has been calculated for most prominent peak (113) of XRD and has been explained on the basis of cations ionic radii difference.

36 MATERIALS SCIENCE↗

Hydrogen-doped In{sub 2}O{sub 3} transparent conducting oxide films prepared by solid-phase crystallization method

We have characterized amorphous to crystalline transformation of hydrogen (H)-doped In{sub 2}O{sub 3} (In{sub 2}O{sub 3}:H) films by transmission electron microscopy, thermal desorption spectroscopy, spectroscopic ellipsometry, and Hall measurements. The In{sub 2}O{sub 3}:H films that show a mixed-phase structure embedded with small density of crystalline grains in a large volume fraction of amorphous phase have been fabricated at room temperature by the sputtering of an In{sub 2}O{sub 3} ceramic target with introduction of H{sub 2}O vapor, and the films have been postannealed in vacuum to crystallize the amorphous phase. With increasing annealing temperature up to 200 deg. C, the film shows a large increase in Hall mobility ({mu}{sub Hall}) from 42 to 110 cm{sup 2}/V s and a decrease in carrier density (N{sub Hall}) from 4.6x10{sup 20} to 2.1x10{sup 20} cm{sup -3} with slight decrease in resistivity. The change in {mu}{sub Hall} and N{sub Hall} with annealing temperature is strongly correlated with the volume fractions of the amorphous and crystalline phases in the films. Analyses of dielectric functions of the films using the Drude model revealed that the high electron mobility in the crystallized films is attributed mainly to longer relaxation time rather than smaller effective mass, as compared with as-deposited films. Temperature-dependent Hall analysis, relationship between N{sub Hall} and {mu}{sub Hall}, and comparison between {mu}{sub Hall} and optical mobility showed that (i) scattering processes inside amorphous and/or crystalline matrices limit the mobility, (ii) doubly charged ionized impurity scattering is reduced by crystallization, and (iii) phonon scattering becomes dominant after crystallization in the In{sub 2}O{sub 3}:H films. The above results suggest that H-doping reduces carrier scattering in the crystallized In{sub 2}O{sub 3}:H and structural rearrangements during crystallization eliminate oxygen deficiency and generate H{sup +} that acts as a singly charged donor. In this article, we discuss the transport properties with the variation in microscopic and chemical structures in the In{sub 2}O{sub 3}:H films.

36 MATERIALS SCIENCE↗

Morphology of solar wind fluctuations and structure in the vicinity of the Sun from radio propagation measurements

Radio propagation measurements represent a powerful means for remote probing of electron density and solar wind speed in the acceleration region of the solar wind not yet explored by in situ measurements. Recent investigations based on radio propagation measurements have led to considerable progress in our knowledge of the general morphology of solar wind fluctuations and structure, especially in terms of their relationship to solar wind properties that have been observed directly by fields and particles measurements, and to coronal features observed in white-light measurements. The purpose of this paper is to present an overview of the latest results on quasi-stationary structure covering the large scale variation of solar wind speed over the streamer belt and coronal hole regions, coronal streamers (source of slow solar wind) and their associated small-scale electron density structure, plumes, density and fractional or relative density fluctuations, and the spectral characteristics of the electron density fluctuations. The radio propagation measurements not only reveal new information on the structure near the Sun, but also show that the structure appears to undergo substantial evolution on its way to 0.3 AU, the closest radial distance for which direct in situ spacecraft measurements are available.

Woo, R.↗

Non-uniform Mg distribution in GaN epilayers grown on mesa structures for applications in GaN power electronics

A strong variation in the luminescence characteristics in Mg-doped GaN grown on mesa structures has been observed, with the sidewall luminescence being different from that of the flat regions. A comparison with the luminescence characteristics of Mg-doped GaN epilayers with different Mg concentrations indicates that the sidewall has a significantly lower Mg content. Here, this observed non-uniform Mg distribution is attributed to the dependence of Mg incorporation efficiency on the crystal orientation of the growth surface, which should impact the electrical performance of power devices.

36 MATERIALS SCIENCE↗

A comparative study of experimental and simulated ultrasonic pulse-echo signals from multilayered structures

The effect on the system acoustic response of variations in the adhesive thickness, coupling thickness, and paint thickness is considered. Both simulations and experimental measurements are used to characterize and classify A-scans from test regions, and to study the effects of various parameters such as paint thickness and epoxy thickness on the variations in the reflected signals. A 1D model of sound propagation in multilayered structures is used to verify the validity of the measured signals, and is also used to computationally generate signals for a class of test locations with gradually varying parameters. This approach exploits the ability of numerical simulations to provide a good understanding of the ultrasonic pulses reflected at disbonds.

Abedin, M. N.↗

Planck intermediate results: XXIV. Constraints on variations in fundamental constants*

Any variation in the fundamental physical constants, more particularly in the fine structure constant, α, or in the mass of the electron, me, affects the recombination history of the Universe and cause an imprint on the cosmic microwave background angular power spectra. We demonstrate that the Planck data allow one to improve the constraint on the time variation of the fine structure constant at redshift z ∼ 10 3 by about a factor of 5 compared to WMAP data, as well as to break the degeneracy with the Hubble constant, H 0 . In addition to α, we can set a constraint on the variation in the mass of the electron, me, and in the simultaneous variation of the two constants. We study in detail the degeneracies between fundamental constants and the cosmological parameters, in order to compare the limits obtained from Planck and WMAP and to determine the constraining power gained by including other cosmological probes. We conclude that independent time variations of the fine structure constant and of the mass of the electron are constrained by Planck to Δα/α = (3.6 ± 3.7) × 10 -3 and Δme/me = (4 ± 11) × 10 -3 at the 68% confidence level. We also investigate the possibility of a spatial variation of the fine structure constant. The relative amplitude of a dipolar spatial variation in α (corresponding to a gradient across our Hubble volume) is constrained to be δα/α = (-2.4 ± 3.7) × 10 -2 .

79 ASTRONOMY AND ASTROPHYSICS↗

Electrical properties of silicon schottky diodes containing metal films of various compositions

Au{sub x}Ti{sub 100{sub -}} {sub x}/n-Si Schottky diodes are fabricated and studied; in addition, the electrical properties of diodes containing metal films with varying composition (x = 0, 14, 30, 38, 60, 80, and 100) are also studied. Using X-ray phase analysis, it is established that the film of Au{sub 38}Ti{sub 62} composition has the amorphous structure, while the remaining films Au{sub x}Ti{sub 100-x} possess the polycrystalline structure. The main parameters of the Schottky diodes are determined in relation to the composition and structure of the metal films. As a result, it is shown that the electrical properties of Au{sub x}Ti{sub 100-x}/n-Si Schottky diodes are related to variations in the composition and structure of metal films.

36 MATERIALS SCIENCE↗

Measures of large-scale structure in the CfA redshift survey slices

Variations of the counts-in-cells with cell size are used here to define two statistical measures of large-scale clustering in three 6 deg slices of the CfA redshift survey. A percolation criterion is used to estimate the filling factor which measures the fraction of the total volume in the survey occupied by the large-scale structures. For the full 18 deg slice of the CfA redshift survey, f is about 0.25 + or - 0.05. After removing groups with more than five members from two of the slices, variations of the counts in occupied cells with cell size have a power-law behavior with a slope beta about 2.2 on scales from 1-10/h Mpc. Application of both this statistic and the percolation analysis to simulations suggests that a network of two-dimensional structures is a better description of the geometry of the clustering in the CfA slices than a network of one-dimensional structures. Counts-in-cells are also used to estimate at 0.3 galaxy h-squared/Mpc the average galaxy surface density in sheets like the Great Wall.

De Lapparent, Valerie↗

Pioneer Venus measurements of H, O, and C production in comet P/Halley near perihelion

The Pioneer Venus Orbiter Ultraviolet Spectrometer measured the production of H, O, and C in comet Halley from late December 1985 to early March 1986. Water production rates obtained from the H data rose from 3.3 x 10 to the 29th/s at 1 AU inbound to 1.2 x 10 to the 30th/s at perihelion; there was a further increase to 1.6 x 10 to the 30th/s followed by a slow decline to 1.4 x 10 to the 30th/s at the time of the Vega-1 encounter. The H measurements show a periodic behavior that imply variations in the water production rate having structure within a 7.4-day sidereal period, in phase with similar variations seen in radical and dust production in March and April. Average H:O:C ratios of 1.0:0.7:0.07 were measured from 10 to 26 days after perihelion.

Stewart, A. I. F.↗