Search NASA⌕ Search

SEARCH · Search NASA

Results for “Technology Development Office”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Workshop to Plan R&D Support of Fuel/Basket Modification for Direct Disposal of Future DPCs

By 2030 about half of all spent nuclear fuel (SNF) arising from the current fleet of commercial power plants will be in dual-purpose canisters (DPCs), which are designed for storage and transportation but not for disposal. As an alternative to complete repackaging of the fuel for disposal, considerable cost savings and lower worker dose could be realized by directly disposing of this SNF in DPCs. The principal technical consideration is criticality control in a geologic repository, because the DPCs are large and depend on neutron absorbing basket components for criticality control. Neutron absorbing materials are generally aluminum-based, and under disposal conditions can degrade after a few hundred years contact with ground water. Simple modifications to the SNF assemblies or the DPC baskets could help to achieve direct disposal, and this is one of the approaches being studied to address the possibility of disposal criticality (SNL 2020a). Five fuel/basket modification concepts have been proposed (SNL 2020b) and a virtual workshop was conducted to solicit review and feedback on these concepts. The proposed solutions are: 1) zone loading of DPCs to limit reactivity, 2) replacing absorber plates with advanced neutron absorbing (ANA) material, 3) adding disposal control rods to pressurized water reactor (PWR) assemblies, 4) rechanneling boiling water reactor (BWR) assemblies with ANA material, and 5) basket insert plates (chevron inserts) made from ANA material. The presentations from the workshop are provided in this report, and the workshop discussions are summarized. This information includes prioritization of the proposed fuel/basket modification solutions, and prioritization of the associated model development, validation testing, and quality assurance activities. Information documented in this report will help to steer research and development efforts at Sandia National Laboratories, Oak Ridge National Laboratory, and Idaho National Laboratory that support the U.S. Department of Energy, Office of Nuclear Energy, Spent Fuel and Waste Science and Technology program

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Land-Based Wind Energy Siting: A Foundational and Technical Resource

This land-based wind energy siting resource was created by the U.S. Department of Energy Wind Energy Technologies Office’s WINDExchange initiative and presents foundational information about land-based utility-scale wind energy that local decision makers can use when making community decisions about wind energy development. Consolidated, accessible, and easy to understand, this information resource focuses on land-based wind energy from the community perspective and examines siting-related impacts and mitigation strategies. Other impacts and strategies exist, such as those related to economics, climate, health, water, emissions, and waste; however, they are not covered in this resource. For more information on economic considerations, see the “Land-Based Wind: Economic Development Guide” and “Advancing the Growth of the U.S. Wind Industry: Federal Incentives, Funding, and Partnership Opportunities.” The intended audience for this guide is county-level decision officials, as they are often responsible for approving both wind energy ordinances and applicable permits needed for wind energy development. This guide may also provide relevant information to decision makers from other government jurisdictions and interested community members.

17 WIND ENERGY↗
DOE OSTI2022

Auto Indexer for Percussive Hammers Final Report

Geothermal energy has been underutilized in the U.S., primarily due to the high cost of drilling in the harsh environments encountered during the development of geothermal resources. Drilling depths can approach 5,000 m with temperatures reaching 170 C. In situ geothermal fluids are up to ten times more saline than seawater and highly corrosive, and hard rock formations often exceed 240 MPa compressive strength. This combination of extreme conditions pushes the limits of most conventional drilling equipment. Furthermore, enhanced geothermal systems are expected to reach depths of 10,000 m and temperatures more than 300 °C. To address these drilling challenges, Sandia developed a proof-of-concept tool called the auto indexer under an annual operating plan task funded by the Geothermal Technologies Program (GTP) of the U.S. Department of Energy Geothermal Technologies Office. The auto indexer is a relatively simple, elastomer-free motor that was shown previously to be compatible with pneumatic hammers in bench-top testing. Pneumatic hammers can improve penetration rates and potentially reduce drilling costs when deployed in appropriate conditions. The current effort, also funded by DOE GTP, increased the technology readiness level of the auto indexer, producing a scaled prototype for drilling larger diameter boreholes using pneumatic hammers. The results presented herein include design details, modeling and simulation results, and testing results, as well as background on percussive hammers and downhole rotation.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Furthering Advancements to Shorten the Time (FAST) to Commissioning for Pumped Storage Hydropower (PSH) Prize (CRADA Final Report)

NREL initiated a prize with support from Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL), and sponsored by the U.S. Department of Energy Water Power Technologies Office (DOE WPTO) to encourage ideas to reduce the time to commissioning for PSH projects. As a result, Southwest Research Institute (SWRI) was chosen as one of nine finalists to develop their concept in advance of the FAST Prize Pitch Contest held on October 27, 2021. The National Labs provided technical and business advisement to SWRI in preparation for this Pitch Contest.

13 HYDRO ENERGY↗
DOE OSTI2022

IMoFi - Intelligent Model Fidelity: Physics-Based Data-Driven Grid Modeling to Accelerate Accurate PV Integration (Final Report)

This report summarizes the work performed under a project funded by U.S. DOE Solar Energy Technologies Office (SETO) to use grid edge measurements to calibrate distribution system models for improved planning and grid integration of solar PV. Several physics-based data-driven algorithms are developed to identify inaccuracies in models and to bring increased visibility into distribution system planning. This includes phase identification, secondary system topology and parameter estimation, meter-to-transformer pairing, medium-voltage reconfiguration detection, determination of regulator and capacitor settings, PV system detection, PV parameter and setting estimation, PV dynamic models, and improved load modeling. Each of the algorithms is tested using simulation data and demonstrated on real feeders with our utility partners. The final algorithms demonstrate the potential for future planning and operations of the electric power grid to be more automated and data-driven, with more granularity, higher accuracy, and more comprehensive visibility into the system.

14 SOLAR ENERGY↗
DOE OSTI2022

Light Water Reactor Sustainability Program: Complete the weld campaign on Ni-base irradiated materials using stress improved laser welding including the preliminary weld quality inspections

This report summarizes the most recent welding campaign on irradiated Ni-base alloy 182 and the preliminary weld quality inspections at the Radiochemical Engineering Development Center (REDC). Equipment and capabilities were developed jointly by the U.S. Department of Energy, Office of Nuclear Energy, Light Water Reactor Sustainability Program, the Electric Power Research Institute, Long Term Operations Program (and the Welding and Repair Technology Center), and Oak Ridge National Laboratory. Irradiated nickel alloy 182, with target helium contents of 5 atom parts-per million (appm), 10 appm, and 20 appm, were laser welded in the hot cell successfully. The significant, on-going effort to weld irradiated alloys with high helium concentrations and comprehensively analyze the results will eventually yield validated repair techniques and guidelines for use by the nuclear industry in extending the operational lifetimes of nuclear power plants. This report fulfills the FY 2023 milestone M3LW-22OR0406013, “Complete the weld campaign on Ni base irradiated materials using stress improved laser welding including the preliminary weld quality inspections”.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Complete the first phase of the comprehensive characterization of repair welding performed on irradiated Ni alloy 182

This report describes the research activities on post-weld evaluation and characterization of the quality and properties of welds made on the first phase of repair welding campaign on irradiated Ni alloy 182. The equipment and capabilities of the campaign were developed jointly by the U.S. Department of Energy, Office of Nuclear Energy, Light Water Reactor Sustainability Program, the Electric Power Research Institute, Long Term Operations Program (and the Welding and Repair Technology Center), and Oak Ridge National Laboratory. Irradiated nickel alloy 182 with doped boron ranging from 5 wppm to 15 wppm, were laser welded in the hot cell. The weld samples were cross-sectioned and characterized. The significant, on-going effort to weld irradiated alloys with high helium concentrations and comprehensively analyze the results will eventually yield validated repair techniques and guidelines for use by the nuclear industry in extending the operational lifetimes of nuclear power plants.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1989

Technology transfer and the NASA Technology Utilization Program - An overview

The goal of the NASA Technology Utilization (TU) Program is to broaden and accelerate the transfer of aerospace technology and to develop new commercial products and processes that represent additional return on the national investment in the U.S. space programs. The mechanisms established by the TU Program includes TU offices, publications, the information retrieval, software dissemination, and the NASA Applications Engineering Program. These mechanisms are implemented through a nationwide NASA TU Network, working closely with industry and public sector organizations to encourage and facilitate their access and utilization of the results of the U.S space programs. Examples of TU are described, including a method for the reduction of metal fatigue in textile equipment and a method for the management of wandering behavior in Alzheimer's patients.

Clarks, Henry J.↗
NASA NTRS1994

Space flight manipulator technologies and requirements for the NASA Flight Telerobotic Servicer (FTS)

NASA Headquarters' Office of Advanced Concepts and Technology (OACT) joined efforts with Johnson Space Center's (JSC) Automation and Robotics Division and Langley Research Center's (LaRC) Information Systems Division to capture the technologies developed during the cancelled NASA Flight Telerobotic Servicer (FTS) program planned for use on Space Station Freedom. The recent FTS technology capture effort completed the build and testing of one flight qualifiable FTS manipulator, deliverable to JSC's Automation & Robotics Division for environmental testing. The many robotic technologies developed to meet the 30 year space environment design requirements are discussed in this paper. The manipulator properties were to allow positioning control to one thousandths of an inch, with zero actuator backlash over a temperature range of -50 to +95 C, and were to include impedance control and inertial decoupling. Safety and reliability requirements are discussed that were developed to allow a thirty year life in space with minimum maintenance. The system had to meet the safety requirements for hazardous payloads for operation in the shuttle payload bay during demonstration test flights prior to station use. A brief description is contained on an orbiter based robotic experiment and operational application using the dexterous FTS manipulator operating on the end of the shuttle remote manipulator systems (SRMS) from ground control.

Chladek, John T.↗
NASA NTRS2004

The Montage architecture for grid-enabled science processing of large, distributed datasets

Montage is an Earth Science Technology Office (ESTO) Computational Technologies (CT) Round III Grand Challenge investigation to deploy a portable, compute-intensive, custom astronomical image mosaicking service for the National Virtual Observatory (NVO). Although Montage is developing a compute- and data-intensive service for the astronomy community, we are also helping to address a problem that spans both Earth and Space science, namely how to efficiently access and process multi-terabyte, distributed datasets. In both communities, the datasets are massive, and are stored in distributed archives that are, in most cases, remote from the available Computational resources. Therefore, state of the art computational grid technologies are a key element of the Montage portal architecture. This paper describes the aspects of the Montage design that are applicable to both the Earth and Space science communities.

virtual observatory↗
NASA NTRS2005

KSC SBIR/STTR 2004 Program Year Report

The Kennedy Space Center Level III SBIR/STTR management staff is under the Technology Transfer Office within the Spaceport Engineering and Technology Directorate. The SBIR and STTR programs provide an opportunity for small high technology companies and research institutions to participate in Government-sponsored research and development (R&D) programs in key technology areas. The SBIR program was established by Congress in 1982 to provide increased opportunities for small businesses to participate in R&D programs, increase employment, and improve U.S. competitiveness. The program's specific objectives are to stimulate U.S. technological innovation, use small businesses to meet Federal research and development needs, increase private sector commercialization of innovations, and foster and encourage participation by socially disadvantaged businesses. Legislation enacted in December 2000 reauthorized the program and strengthened emphasis on pursuing commercial applications of SBIR projects. An SBIR Phase I contract is the opportunity to establish the feasibility and technical merit of a proposed innovation. Selected competitively, the Phase I contract lasts for 6 months and is funded up to $70,000. SBIR Phase II contracts continue the most promising Phase I projects based on scientific! technical merit, expected value to NASA, company capability, and commercial potential. Phase II contracts are usually for a period of 24 months and may not exceed $600,000. NASA usually selects approximately 40 percent of Phase I projects to continue to the Phase II level. Phase III is the process of furthering the development of a product to make it commercially available. The STTR program awards contracts to small business concerns for cooperative R&D with a nonprofit research institution. Research institutions include nonprofit research organizations, Federal laboratories, or universities. The goal of the program established by Congress is to facilitate the transfer of technology developed by a research institution through the entrepreneurship of a small business. The STIR program is smaller in funding than the SBIR program. While the proposal is submitted by the small business concern, at least 30 percent of the funding and work must originate with the research institution. STTR Phase I projects receive up to $100K for a one-year effort, and a Phase II contract receives up to $600K for two years.

Source record↗
DOE OSTI2015

“Open Hatch” Tour of Offshore Wind Buoy

Wind and Water Power Technologies Office Director, Jose Zayas gives a behind the scenes tour of the AXYS WindSentinel research buoy, which uses high-tech instruments to measure conditions for potential offshore wind energy development.

16 TIDAL AND WAVE POWER↗
DOE OSTI2018

Fuel Property Characterization and Prediction

This presentation describes the progress made over the last year on the Fuel Property Characterization and Prediction tasks as part of the CoOptima program under the Vehicle Technologies Office. The tasks reviewed are: Fuel Property Blending Model (F.1.2.2 and F.1.2.3), the Heat of Vaporization Measurement for Full Boiling Range Fuels (F.1.3.2), and the Flow Reactor Autoignition Kinetic Mechanism Development and Validation (F.2.1.4) tasks.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Energy I-Corps Annual Report 2022

The U.S. Department of Energy Office of Technology Transitions is pleased to provide an update on the Energy I-Corps program. Now in its eighth year, Energy I-Corps addresses critical gaps in workforce development for our National Lab researchers. It provides meaningful real-world opportunities for the application of commercialization and entrepreneurial skills to DOE technologies. As of November 2022, 191 teams from 12 National Labs have participated in Energy I-Corps over the course of 15 cohorts and the pilot. Since its inception, Energy I-Corps participants have learned from more than 180 industry mentors and conducted over 13,600 discovery interviews with companies like: EPRI, Shell, Ford, World Bank, Breakthrough Energy, John Deere, Siemens Gamesa, Chevron, Eaton, Samsung, Lowes, Johns Manville, LEGO, U.S. Army, Trane, Tesla, GM, Dow Chemical, 3M, Whirlpool, GE, Home Depot, and Amazon. Over 20 teams have launched new businesses based on their Energy I-Corps technology. Post Energy I-Corps, technologies have attracted over $140M in post-program funding and executed over 75 licenses.

cohort↗
DOE OSTI2023

AN OVERVIEW OF THE DESIGN AND PERFORMANCE TESTING OF A 275 BAR INTEGRALLY GEARED SUPERCRITICAL CO2 COMPRESSOR FOR POWER GENERATION

An integrally geared compressor-expander (compander) for supercritical CO2 (sCO2) was developed to convert thermal energy to electricity. With operating pressures of 275 bar, this turbomachine represents the state of the art in integrally geared machine architecture, hitting compressor inlet densities of 600 kg/m3 and discharge pressures of 275 bar. The product development was funded by the Department of Energy’s Energy Efficiency and Renewable Energy Office under EE0007114 to advance the state of the art in concentrated solar power applications; however, the technology itself is agnostic to heat source, and is predicted to achieve a thermal-to-electric conversion efficiency of 50% for any indirect heat source capable of providing turbine inlet temperatures of 700°C or greater. While the program encompassed the design and testing for the compressor and turbine elements, this paper will focus on the compressor design and operation. The paper will begin with an introduction to the cycle design and analysis of an indirectly heated integrally geared sCO2 compander, a discussion of the mechanical and aerodynamic design of the compressor that is a two stage radial compressor operating subcritically at 27,512 rpm, and will then proceed to describe the test facility and measured data to characterize the performance and robustness of the machine. The paper will conclude with a discussion on lessons learned throughout the course of commissioning and testing. Practical aspects of testing a compressor operating near the dome including complications relating to obtaining an accurate compressor flow map, efficiency calculations, flow unsteadiness, and associated measurement uncertainties will be discussed.

wilkes, jason↗
DOE OSTI2024

ARIES: Advanced Research on Integrated Energy Systems

One of the primary challenges to achieving a clean energy future is closing the gap between ambitions and real-world deployment. To accelerate solutions for a clean energy future, the National Renewable Energy Laboratory (NREL), in partnership with the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy, developed a visionary research platform called Advanced Research on Integrated Energy Systems (ARIES). ARIES takes in the full picture - from community energy needs to technology developers and service providers - rather than evaluating clean energy and technologies in isolation. This innovative approach uncovers opportunities and risks in the spaces where energy technologies and sectors - such as transportation, industry, buildings, and the electric grid - meet.

ARIES↗
DOE OSTI2025

Decarbonizing Solvent Chemistry Through Microwave Processing [Abstract]

National Energy Technology Laboratory and Covestro LLC. will collaborate on a project titled, “Decarbonizing Solvent Chemistry Through Microwave Processing”, which was selected for funding by DOE’s Office of Energy Efficiency and Renewable Energy (EERE) Industrial Efficiency and Decarbonization Office (IEDO) FOA DE-EE0002997. The project aims to develop a microwave-based approach for low-heat aqueous-based industry-relevant reactions currently conducted using a conventional fossil-energy fueled hydrothermal reactor. The team has combined expertise in the areas of polymer production, microwave assisted reactions and scale-up, and life cycle analysis to perform the tasks proposed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

High Performance Computing Facility Operational Assessment 2022: Oak Ridge Leadership Computing Facility

The Oak Ridge Leadership Computing Facility (OLCF) was established to accelerate scientific discovery by providing world-leading computational performance and advanced data infrastructure. As a US Department of Energy (DOE) Office of Science user facility, the OLCF has managed the successful deployment and operation of a succession of leadership-class resources dedicated to open science. In addition to these resources, the OLCF staff continually strive to develop innovative processes and technologies, improve security, and empower users through allocation management and comprehensive user support and training. These efforts support the advancement of science by the OLCF users and benefit high-performance computing (HPC) facilities around the world. In calendar year (CY) 2022, the OLCF supported 1,681 users and 570 projects and exceeded all targets for user satisfaction. The facility received an average satisfaction score of 4.6 out of 5 on the annual user survey, and 96% of respondents reported a high satisfaction rate with the OLCF overall. Of the 3,212 user tickets submitted in CY 2022, OLCF staff resolved 97% within 3 business days. The facility also introduced several new services for users this year, including weekly virtual office hours with subject matter experts from ORNL and vendor partners; new views in MyOLCF that allow users to analyze allocation and compute usage for a project; the ability to build and run containers on Summit; and improved data visualization support and training resources.

97 MATHEMATICS AND COMPUTING↗