Search NASA⌕ Search

SEARCH · Search NASA

Results for “Waste Processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Use of FGD gypsum in fire resistant panels

Gypsum from power plant flue gas desulphurization units (FGD gypsum) is a combustion by-product produced in high quantities. In this paper, gypsum panels composed of 100% FGD gypsum from two power plants have been subjected to different physico-chemical (density, pH, humidity), mechanical (flexural and compressive strength, surface hardness, impact resistance), fire resistance and environmental tests (leaching and radioactivity). The results obtained have been compared with the requirements established in some European standards for commercial gypsum and other standards for similar products. In addition, the panels manufactured have been compared with commercial gypsum panels in order to determine the recycling possibilities of this kind of material in this application.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

'Radiotoxicity Index': An Inappropriate Discriminator for Advanced Fuel Cycle Technology Selection - 12276

A radiotoxicity index (RI) is often used as a figure of merit for evaluating for evaluating the attractiveness of employing an advanced fuel cycle (i.e., a fuel cycle that uses some combination of separations and other reactor technologies, such as fast reactors), rather than continued use of the current 'once-through' fuel cycle. The RI is calculated by multiplying the amount of every radionuclide found in a waste form for some unit amount of waste times the drinking water dose conversion factor, DCF, for each radionuclide, then summing these together. Some argue that if the RI for an advanced fuel cycle is lower than the RI for a once-through fuel cycle, then implementation of the particular advanced fuel cycle has merit because it reduces the radiotoxicity of the waste. Use of an RI for justifying separations technologies and other components of advanced fuel cycles is not only inappropriate, but can be misleading with respect to judging benefits of advance fuel cycle options. The disposal system, through its use of multiple engineered and natural barriers to migration, eliminates most of the radionuclides contributing to the RI such that additional separations technologies will make little difference to peak dose rates. What must also be considered is the health/dose risk caused to workers and the public by the construction and operation of the separations facility itself. Thus, use of RI may lead to selection of separations technologies that may have a negligible effect on lowering the potential health risks associated with disposal, but will increase real worker and public health risks in the near term. The use of the radiotoxicity index (RI) as a figure of merit for justifying advanced fuel cycles involving separations technologies is not only inappropriate, but can be misleading with respect to judging benefits of advance fuel cycle options. The disposal system, through its use of multiple engineered and natural barriers to migration, eliminates most of the radionuclides contributing to the RI such that additional separations technologies will make little difference to peak dose rates. What must also be considered is the health/dose risk caused to workers and the public by the construction and operation of the separations facility itself. Thus, use of RI may lead to selection of separations technologies that may have a negligible effect on lowering the potential health risks associated with disposal, but will increase real worker and public health risks in the near term. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Vitrification Tests with Potential Technetium Capture Streams

About 50 million gallons of high-level waste is currently stored in underground tanks at The United States Department of Energy’s (DOE’s) Hanford site in the State of Washington. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) will provide DOE’s Office of River Protection (ORP) with a means of treating this waste by vitrification for subsequent disposal. The tank waste will be separated into low- and high-activity waste fractions, which will then be vitrified respectively into Immobilized Low Activity Waste (ILAW) and Immobilized High Level Waste (IHLW) products. The ILAW product will be disposed in an engineered facility on the Hanford site while the IHLW product is designed for acceptance at a national deep geological disposal facility for high-level nuclear waste. The ILAW and IHLW products must meet a variety of requirements with respect to protection of the environment before they can be accepted for disposal. The Low Activity Waste (LAW) and High-Level Waste (HLW) at Hanford will be vitrified in Joule Heated Ceramic Melters (JHCMs) to produce stable products for disposal. Technetium is an important radioactive component in the Hanford tank waste and is typically one of the principal contributors to risk in performance assessments for the ILAW disposal facility. Technetium is also one of the more volatile radionuclides and the retention of technetium in the glass under the high temperature conditions prevailing during vitrification can vary over a relatively wide range depending on the feed composition, feed chemistry, and melter operating parameters. In support of the WTP Project, the Vitreous State Laboratory (VSL) at The Catholic University of America (CUA) and EnergySolutions have developed and tested glass formulations for WTP waste envelopes to provide data to meet the WTP contract requirements and to support system design activities. That work is based upon small-scale batch melts (“crucible melts”) using waste simulants. Glass compositions suitable for processing the tank waste streams for the WTP have been identified and tested for processing and product quality requirements at various scales, ranging from crucible melts of a few grams, up to the LAW Pilot Melter at processing rates in excess of 6600 kg/day (2000 kg/m 2 /day). Recent testing performed at VSL for Washington River Protection Solutions, LLC (WRPS) has investigated the baseline “single-pass” retention of technetium over the range of WTP LAW feed compositions and glass formulations as well as the development of potential modifications to the baseline that could increase the single-pass retention. For the WTP melter systems, the liquid waste streams from the primary off-gas system components are recycled back to the pretreatment facility and, ultimately, to subsequent melter feed batches. Such a recycle loop can greatly increase the overall retention of volatile constituents in the glass product over the single-pass value. Accordingly, more recent testing at VSL has been conducted on a melter system that incorporates a recycle flow sheet. The results from that work have provided important performance data for the unit operations in the primary off-gas system with respect to technetium capture and recycle, which is crucial in assessing the amount of technetium that ultimately reports to non-glass waste forms.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Consolidation and Centralization of Waste Operations Business Systems - 12319

This abstract provides a comprehensive plan supporting the continued development and integration of all waste operations and waste management business systems. These include existing systems such as ATMS (Automated Transportation Management System), RadCalc, RFITS (Radio Frequency Identification Transportation System) Programs as well as incorporating key components of existing government developed waste management systems and COTS (Computer Off The Shelf) applications in order to deliver a truly integrated waste tracking and management business system. Some of these existing systems to be integrated include IWTS at Idaho National Lab, WIMS at Sandia National Lab and others. The aggregation of data and consolidation into a single comprehensive business system delivers best practices in lifecycle waste management processes to be delivered across the Department of Energy facilities. This concept exists to reduce operational costs to the federal government by combining key business systems into a centralized enterprise application following the methodology that as contractors change, the tools they use to manage DOE's assets do not. IWITS is one efficient representation of a sound architecture currently supporting multiple DOE sites from a waste management solution. The integration of ATMS, RadCalc and RFITS and the concept like IWITS into a single solution for DOE contractors will result in significant savings and increased efficiencies for DOE. Building continuity and solving collective problems can only be achieved through mass collaboration, resulting in an online community that DOE contractors and subcontractors access common applications, allowing for the collection of business intelligence at an unprecedented level. This is a fundamental shift from a solely 'for profit' business model to a 'for purpose' business model. To the conventional-minded, putting values before profit is an unfamiliar and unnatural way for a contractor to operate - unless however; your objective is to build a strong, strategic alliance across the enterprise in order to execute an unprecedented change in waste management, transportation and logistical operations. The success of such an initiative can be achieved by creating a responsible framework by enabling key individuals to 'own' the sustainability of the program. This includes the strategic collaboration of responsible revolutionaries covering application developers, information owners and federal stakeholders to ensure compliance, security and risk management are 'baked' into the process and sustainability is fostered through continued innovation by both technology and application functionality. This ensures that working software can adapt to changing circumstances and is the principle measure of the success of the program. The consolidation of waste management business systems must be achieved in order to realize efficiencies in information technology portfolio management, data integrity, business intelligence and the lifecycle management of hazardous materials within the DOE enterprise architecture. By identifying best practices across the enterprise and aggregating computational and application development resources, you can provide a unified, holistic solution serviceable from a single location while being accessed from anywhere. The business impact of integrating and delivering a unified solution would reduce costs to the Department of Energy within the first year of deployment with increased savings annually. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Biochar to reduce ammonia emissions in gaseous and liquid phase during composting of poultry manure with wheat straw

Highlights: • Biochar can function as an amendment for low C/N and low porosity raw materials. • Biochar reduced the gaseous emissions of ammonia during poultry manure composting. • Significant ammonia emissions [NH{sub 4}{sup +}] in the condensate were registered. • Biochar has a potential impact on N retention during composting of high N materials. •easuring [NH{sub 4}{sup +}] in condensate allows closing up the N balance during composting. - Abstract: Composting of poultry manure which is high in N and dense in structure can cause several problems including significant N losses in the form of NH{sub 3} through volatilization. Biochar due to its recalcitrance and sorption properties can be used in composting as a bulking agent and/or amendment. The addition of a bulking agent to high moisture raw materials can assure optimal moisture content and enough air-filled porosity but not necessarily the C/N ratio. Therefore, amendment of low C/N composting mixtures with biochar at low rates can have a positive effect on composting dynamics. This work aimed at evaluating the effect of selected doses of wood derived biochar amendment (0%, 5% and 10%, wet weight) to poultry manure (P) mixed with wheat straw (S) (in the ratio of 1:0.4 on wet weight) on the total ammonia emissions (including gaseous emissions of ammonia and liquid emissions of ammonium in the collected condensate and leachate) during composting. The process was performed in 165 L laboratory scale composting reactors for 42 days. The addition of 5% and 10% of biochar reduced gaseous ammonia emission by 30% and 44%, respectively. According to the obtained results, the measure of emission through the condensate would be necessary to assess the impact of the total ammonia emission during the composting process.

01 COAL, LIGNITE, AND PEAT↗

Improving the Estimates of Waste from the Recycling of Used Nuclear Fuel - 13410

Estimates are presented of wastes arising from the reprocessing of 50 GWD/tonne, 5 year and 50 year cooled used nuclear fuel (UNF) from Light Water Reactors (LWRs), using the 'NUEX' solvent extraction process. NUEX is a fourth generation aqueous based reprocessing system, comprising shearing and dissolution in nitric acid of the UNF, separation of uranium and mixed uranium-plutonium using solvent extraction in a development of the PUREX process using tri-n-butyl phosphate in a kerosene diluent, purification of the plutonium and uranium-plutonium products, and conversion of them to uranium trioxide and mixed uranium-plutonium dioxides respectively. These products are suitable for use as new LWR uranium oxide and mixed oxide fuel, respectively. Each unit process is described and the wastes that it produces are identified and quantified. Quantification of the process wastes was achieved by use of a detailed process model developed using the Aspen Custom Modeler suite of software and based on both first principles equilibrium and rate data, plus practical experience and data from the industrial scale Thermal Oxide Reprocessing Plant (THORP) at the Sellafield nuclear site in the United Kingdom. By feeding this model with the known concentrations of all species in the incoming UNF, the species and their concentrations in all product and waste streams were produced as the output. By using these data, along with a defined set of assumptions, including regulatory requirements, it was possible to calculate the waste forms, their radioactivities, volumes and quantities. Quantification of secondary wastes, such as plant maintenance, housekeeping and clean-up wastes, was achieved by reviewing actual operating experience from THORP during its hot operation from 1994 to the present time. This work was carried out under a contract from the United States Department of Energy (DOE) and, so as to enable DOE to make valid comparisons with other similar work, a number of assumptions were agreed. These include an assumed reprocessing capacity of 800 tonnes per year, the requirement to remove as waste forms the volatile fission products carbon-14, iodine-129, krypton-85, tritium and ruthenium-106, the restriction of discharge of any water from the facility unless it meets US Environmental Protection Agency drinking water standards, no intentional blending of wastes to lower their classification, and the requirement for the recovered uranium to be sufficiently free from fission products and neutron-absorbing species to allow it to be re-enriched and recycled as nuclear fuel. The results from this work showed that over 99.9% of the radioactivity in the UNF can be concentrated via reprocessing into a fission-product-containing vitrified product, bottles of compressed krypton storage and a cement grout containing the tritium, that together have a volume of only about one eighth the volume of the original UNF. The other waste forms have larger volumes than the original UNF but contain only the remaining 0.1% of the radioactivity. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Panel Session 126: US and International Waste Classifications; Differences and Issues

The panel focused and addressed the existing US waste classification scheme set forth in US 10 CFR Part 61 and DOE Order 435.1 focusing upon the commensurate risk associated with the disposal of radioactive Low-Level (LLW) and High-Level Waste (HLW). The panel provided insights on the ongoing efforts by the NRC in conducting its Very LLW Scoping Study, the waste classification scheme used by the IAEA with a comparison of that system to the waste classification regulatory process in the US and the increasing role of RCRA sites in disposal of LLW in the US. The process used for very low activity waste disposal known as Bulk Survey for Release in the State of Tennessee was discussed as well as various studies conducted by EPRI addressing the relative risks of very low activity waste will be addressed. The panel strived to compare the risks of radioactive LLW and HLW to the operational process used for its disposal in the US and Internationally and determine if changes are needed in the process. The audience heard the perspectives from six panelists that addressed issues ranging from the technical basis used to establish the waste classification system specified in Title 10 of the Code of Federal Regulations (CFR) Part 61 developed by the Nuclear Regulatory Commission; the approaches and impacts for dispositioning materials with Very Low Levels of Radioactive Waste (VLLRW); approaches used by the Department of Energy (DOE) to disposition Low-Level Radioactive Waste (LLW) in accordance with Order 435.1; and methods adopted by the international community to classify and disposition LLW and Intermediate Level Waste (ILW). A summary of each of the presentations given by the panelists is provided herein. Presentations proposed include: 1 - U.S. Low-Level Radioactive Waste Classification System 10 CFR Part 61 - Basis, Updates, and Issues (Rateb (Boby) Abu Eid, US NRC (USA)); 2 - EPRI Research on the Technical Basis for VLLW Classification (Lisa Edwards, EPRI (USA)); 3 - Division of Radiological Health (Anthony Hogan, State of Tennessee (USA)); 4 - Perspectives on VLLW Based on EPA's Low Activity Waste Effort (Thomas Peake, US EPA (USA)); 5 - US Department of Energy Perspectives on Waste Classification (Justin Marble, US DOE (USA))

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Progress on TRANSCEND Theme 1: Integrated Waste Management - 20194

The management of radioactive waste includes mobilisation, processing, packaging, storage, transport and final disposal. Research in the Integrated Waste Management theme of TRANSCEND focuses on underpinning science and engineering in areas of relevance to hazard reduction and decommissioning and the objectives are to: (1) develop new materials for effluent decontamination; (2) demonstrate predictive modelling of sludge/slurry removal, underpinned by experimental data; (3) transform understanding of radiation-driven processes in nuclear waste sludges; and (4) provide underpinning studies to develop innovative processes and wasteform materials. This paper gives overviews of the 16 research projects that will be done over the next 3 years in this theme. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Impact of Crystalline Silicotitanate Particle Size on Cesium Removal Efficiency

Washington River Protection Solutions is working on a Tank-Side Cesium Removal (TSCR) system to remove Cs from Hanford tank waste supernate. Removal of 137 Cs from tank waste supernate by TSCR results in a low-activity waste (LAW) form that can be fed directly to the Hanford Waste Treatment and Immobilization Plant (WTP) LAW vitrification facility, where the supernate can be vitrified into a glass form. Crystalline silicotitanate (CST) ion exchange media, manufactured by Honeywell UOP, LLC (product IONSIV TM R9140-B), was selected for use as the ion exchange media to remove Cs at TSCR. The particle size used in testing is expected to impact the kinetic performance of the ion exchange media. Therefore, two single-column systems were tested with CST Lot 2002009604. One column contained <25 mesh sieve cut fraction and the other column contained <35 mesh sieve cut fraction. Flowrate through both test systems was adjusted to match the CST contact time expected for the full-scale operation, i.e., matched bed volumes per hour (BV/h) at 1.83 BV/h. The feed was processed downflow through the columns until ~1000 BVs of feed were processed. The waste acceptance criteria (WAC) limit for the WTP LAW vitrification facility is <3.18E-5 Ci 137 Cs per mole Na. For a tank waste containing 156 µCi/mL 137 Cs and 5.6 M Na, up to 0.114% of the influent 137 Cs concentration may be delivered to the WTP (based on 137 Cs content in AP-107 tank waste); this required a Cs decontamination factor of 876. The WAC limit was used as one of the relevant process parameters, along with the 50% breakthrough point, Cs loading per gram of CST, and the mass transfer zone.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Literature Survey to Identify Potentially Volatile Iodine-Bearing Species Present in Off-Gas Streams

Four radionuclides have been identified as being sufficiently volatile in the reprocessing of nuclear fuel that their gaseous release needs to be controlled to meet regulatory requirements (Jubin et al. 2011, 2012). These radionuclides are 3H, 14C, 85Kr, and 129I. Of these, 129I has the longest half-life and potentially high biological impact. Accordingly, control of the release of 129I is most critical with respect to the regulations for the release of radioactive material in stack emissions. It is estimated that current EPA regulations (EPA 2010) would require any reprocessing plant in the United States to limit 129I release to less than 0.05 Ci/MTIHM for a typical fuel burnup of 55 gigawatt days per metric tonne (GWd/t) (Jubin 2011). The study of inorganic iodide in off-gas systems has been almost exclusively limited to I2 and the focus of organic iodide studies has been CH3I. In this document, we provide the results of an examination of publically available literature that is relevant to the presence and sources of both inorganic and organic iodine-bearing species in reprocessing plants. We especially focus on those that have the potential to be poorly sequestered with traditional capture methodologies. Based on the results of the literature survey and some limited thermodynamic modeling, the inorganic iodine species hypoiodous acid (HOI) and iodine monochloride (ICl) were identified as potentially low-sorbing iodine species that could present in off-gas systems. Organic species of interest included both short chain alkyl iodides such as methyl iodide (CH3I) and longer alkyl iodides up to iodododecane (C10H21I). It was found that fuel dissolution may provide conditions conducive to HOI formation and has been shown to result in volatile long-chain alkyl iodides, though these may not volatilize until later in the reprocessing sequence. Solvent extraction processes were found to be significant sources of various organic iodine-bearing species; formation of these was facilitated by the presence of radiolytic decomposition products resulting from radiolysis of tri-n-butyl phosphate and dodecane. Primarily inorganic iodine compounds were expected from waste management processes, including chlorinated species such as ICl. Critical knowledge gaps that must still be addressed include confirmation of the existence and quantification of low-sorbing species in the off-gas of reprocessing facilities. The contributions from penetrating forms of iodine to the plant DF are largely unknown and highly dependent on the magnitude of their presence. These species are likely to be more difficult to remove and it is likely that their sequestration could be improved through the use of different sorbents, through design modifications of the off-gas capture system, or through chemical conversion prior to iodine abatement that would produce more easily captured forms.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Economic Feasibility of Electrochemical Caustic Recycling at the Hanford Site

This report contains a review of potential cost benefits of NaSICON Ceramic membranes for the separation of sodium from Hanford tank waste. The primary application is for caustic recycle to the Waste Treatment and Immobilization Plant (WTP) pretreatment leaching operation. The report includes a description of the waste, the benefits and costs for a caustic-recycle facility, and Monte Carlo results obtained from a model of these costs and benefits. The use of existing cost information has been limited to publicly available sources. This study is intended to be an initial evaluation of the economic feasibility of a caustic recycle facility based on NaSICON technology. The current pretreatment flowsheet indicates that approximately 6,500 metric tons (MT) of Na will be added to the tank waste, primarily for removing Al from the high-level waste (HLW) sludge (Kirkbride et al. 2007). An assessment (Alexander et al. 2004) of the pretreatment flowsheet, equilibrium chemistry, and laboratory results indicates that the quantity of Na required for sludge leaching will increase by 6,000 to 12,000 MT in order to dissolve sufficient Al from the tank-waste sludge material to maintain the number of HLW canisters produced at 9,400 canisters as defined in the Office of River Protection (ORP) System Plan (Certa 2003). This additional Na will significantly increase the volume of LAW glass and extend the processing time of the Waste Treatment and Immobilization Plant (WTP). Future estimates on sodium requirements for caustic leaching are expected to significantly exceed the 12,000-MT value and approach 40,000-MT of total sodium addition for leaching (Gilbert, 2007). The cost benefit for caustic recycling is assumed to consist of four major contributions: 1) the cost savings realized by not producing additional immobilized low-activity waste (ILAW) glass, 2) caustic recycle capital investment, 3) caustic recycle operating and maintenance costs, and 4) research and technology costs needed to deploy the technology. In estimating costs for each of these components, several parameters are used as inputs. Due to uncertainty in assuming a singular value for each of these parameters, a range of possible values is assumed. A Monte Carlo simulation is then performed where the range of these parameters is exercised, and the resulting range of cost benefits is determined.

36 MATERIALS SCIENCE↗

CAUSTIC SIDE SOLVENT EXTRACTION AT THE SAVANNAH RIVER SITE OPERATING EXPERIENCE AND LESSONS LEARNED

The Modular Caustic-Side Solvent Extraction Unit (MCU) is the first, production-scale Caustic-Side Solvent Extraction process for cesium separation to be constructed. The process utilizes an engineered solvent to remove cesium from waste alkaline salt solution resulting from nuclear processes. While the application of this solvent extraction process is unique, the process uses commercially available centrifugal contactors for the primary unit operation as well as other common methods of physical separation of immiscible liquids. The fission product, cesium-137, is the primary focus of the process due to the hazards associated with its decay. The cesium is extracted from the waste, concentrated, and stripped out of the solvent resulting in a low-level waste salt solution and a concentrated cesium nitrate stream. The concentrated cesium stream can be vitrified into borosilicate glass with almost no increase in glass volume, and the salt solution can be dispositioned as a low-level grout. The unit is deployed as an interim process to disposition waste prior to start-up of the Salt Waste Processing Facility. The Salt Waste Processing Facility utilizes the same cesium removal technology, but will treat more contaminated waste. The MCU is not only fulfilling a critical need, it is the first demonstration of the process at production-scale.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Solid waste management challenges for cities in developing countries

Highlights: Black-Right-Pointing-Pointer Stakeholders. Black-Right-Pointing-Pointer Factors affecting performance waste management systems. Black-Right-Pointing-Pointer Questionnaire as Annex for waste management baseline assessment. - Abstract: Solid waste management is a challenge for the cities' authorities in developing countries mainly due to the increasing generation of waste, the burden posed on the municipal budget as a result of the high costs associated to its management, the lack of understanding over a diversity of factors that affect the different stages of waste management and linkages necessary to enable the entire handling system functioning. An analysis of literature on the work done and reported mainly in publications from 2005 to 2011, related to waste management in developing countries, showed that few articles give quantitative information. The analysis was conducted in two of the major scientific journals, Waste Management Journal and Waste Management and Research. The objective of this research was to determine the stakeholders' action/behavior that have a role in the waste management process and to analyze influential factors on the system, in more than thirty urban areas in 22 developing countries in 4 continents. A combination of methods was used in this study in order to assess the stakeholders and the factors influencing the performance of waste management in the cities. Data was collected from scientific literature, existing data bases, observations made during visits to urban areas, structured interviews with relevant professionals, exercises provided to participants in workshops and a questionnaire applied to stakeholders. Descriptive and inferential statistic methods were used to draw conclusions. The outcomes of the research are a comprehensive list of stakeholders that are relevant in the waste management systems and a set of factors that reveal the most important causes for the systems' failure. The information provided is very useful when planning, changing or implementing waste management systems in cities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Optimal Design of Food Packaging Considering Waste Management Technologies to Achieve Circular Economy

Plastic packaging plays a fundamental role in the food industry, avoiding food waste and facilitating food access. The increasing plastic production and the lack of appropriate plastic waste management technologies represent a threat to the environmental and human welfare. Therefore, there is an urgent need to identify sustainable packaging solutions. Circular economy (CE) promotes reducing waste and increasing recycling practices to achieve sustainability. In this work, we propose a CE framework based on multi-objective optimization, considering both economic and environmental impacts, to identify optimal packaging designs and waste management technologies. Using mixed-integer linear programming (MILP), techno-economic analysis (TEA), and life cycle assessment (LCA), this work aims to build the first steps in packaging design, informing about the best packaging alternatives and the optimal technology or technologies to process packaging waste. For the economic analysis, we consider the minimum increase in price (MIP) when adding recycling to the cost of each packaging solution, while for the environmental analysis, the greenhouse gas emissions impact was considered. A case study on ground coffee packaging is used to illustrate the proposed framework. The results demonstrate that the multilayer bag option is the most convenient when considering both the chosen economic and environmental impacts.

Life Cycle Analysis↗

Uptake selectivity for different types of zeolites in the presence of boric acid - 15244

The development of selective adsorbents is very important subject for the effective multi-nuclide decontamination related to the severe accident of Fukushima NPP-1. Many removal methods have been developed to separate nuclide from decontaminated solutions containing multi-nuclide so far. From the standpoint of cost efficiency, stability for usage and safety handling, the decontamination methods using inorganic adsorbents are one of the most effective methods for the selective decontamination system. Thus, many researches related to inorganic adsorbents have been carried out after the accident; actually, in Fukushima NPP-1, zeolites are used to remove radioactive nuclides from decontaminated water as a main adsorbent in the circulating injection cooling system. However, the adsorption characteristics of zeolites in the presence of boric acid have not been clarified in detail. As for the decontamination in PWR[1], the adsorption properties should be examined in the presence of highly concentrated boric acid. Based on this background, the final objective of this study is to develop the decontamination methods in PWR-NPP by using various zeolites for multi-nuclide. In this study, the adsorption properties for eight kinds of zeolites (Zeolite A, Zeolite X, Zeolite Y, Zeolite L, Chabazite, Synthetic Mordenite, Natural Mordenite and Clinoptilolite) are evaluated in the presence of boric acid and seawater. The present study deals with (1) selective adsorption properties for single nuclide ion ({sup 137}Cs{sup +}, {sup 60}Co{sup 2+}, {sup 85}Sr{sup 2+} and {sup 152}Eu{sup 3+}), (2) preparation of Ag-loaded Natural Mordenite (Ag-NM) and uptake properties of I- ions, and (3) multi-nuclide decontamination properties of 26 elements (typical elements in Advanced Liquid Processing System (ALPS) in Fukushima NPP-1) for the above zeolites. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Findings from Large Bench-Scale Testing of Denitration Electrolyzers for the EDCGe Project

This report highlights the key findings and outcomes relevant to the processability of waste supernatant at Hanford using a denitration electrolyzer. The Electrosynthesis Company issued a Phase 1 report to the Savannah River National Laboratory (SRNL), summarizing the evaluation of large bench-scale denitration electrolyzers to support the electrochemical denitration and caustic generation (EDCGe) project. The Electrosynthesis Company’s report (attached as Appendix A) provides insights into the initial steps required to implement an electrolyzer system at Hanford. Phase 1 experiments focused on validating the denitration electrolyzer’s performance, operating parameters, and reaction products. The robustness of the electrochemical denitration process was demonstrated by two electrolyzer flow cell systems (a 100 cm 2 ElectroCell MP and a 150 cm 2 NESI NS01 cell), both of which achieved significant nitrate and nitrite removal (>50%) with a current efficiency of ~95% for both systems. Higher current densities (500 mA cm –2 ) improved nitrate and nitrite removal rates compared to lower current densities (333 mA cm –2 ), while maintaining a current efficiency of ~94%. The NS01 cell achieved a nitrate species removal rate of ~0.41 mol h –1 at 5 kA m –2 (equiv. to 500 mA cm –2 ). The primary reaction product was ammonia (NH 3 ), constituting 78.3–91.6% of the products (excluding OH – formation). NH 3 was predominantly retained in the catholyte liquid phase rather than being off-gassed. Additionally, the NS01 cell reported an NH 3 generation rate of ~0.36 mol h –1 at 5 kA m –2 . Other gas formation included ~7% N 2 , ~7% H 2 , and trace amounts of N 2 O. The estimated power requirement (extrapolated from the 0.015 m 2 cell data) for a full-scale denitration electrolyzer is approximated to be ~1.6 MW (DC-only) to treat 50% of nitrate and nitrite in a waste stream and generates ~2.1 kmol h –1 of NH 3 with an initial concentration of 4 M NO 3 – /NO 2 – at 300 gal h –1 . Simulated waste containing aluminate, carbonate, oxalate, and halogens exhibited no adverse effects on denitration performance. A preliminary experiment comparing alkaline anolyte (5 M NaOH) with a nickel based anode to acidic media (2 M H 2 SO 4 ) with a DSA-O 2 anode showed a lower operating voltage and generated less H 2 than the acid media. Maintaining a stable 5 M OH – concentration in the anolyte through periodic additions of caustic did not significantly impact denitration performance. This operational mode will be required for long-term experiments. All the experiments demonstrated that electrochemical denitration is a promising approach for treating nitrate and nitrite in simulated waste streams, achieving significant conversion and robustness across varying experimental conditions and electrochemical cell configurations. Lastly, the ability to generate a nearly pure NH 3 stream may prove advantageous for processing at other locations within the Hanford site.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Advancing biological processing for valorization of plastic wastes

We report the useful applications of plastics are as significant as the problems associated with their disposal. Current waste management strategies are ineffective at preventing the flow of plastics into landfills, wastewater treatment, and the environment. Despite the importance of recycling technologies, most plastics are used for consumables and are discarded after limited usage. Moreover, only certain plastics are recycled, and those that are generally yield lower value products. Discovering alternative routes for valorizing plastic wastes is essential. Emerging research involves the use of biocatalysts (i.e., enzymes and microorganisms) to produce valuable products like specialty polymers, biosurfactants, and drug precursors from these feedstocks. These bioprocesses commonly integrate physio-chemical pretreatments (to generate biologically reactive intermediates) and biological upgrading (to convert intermediates to products). Herein, publications that explore plastic deconstruction technologies and bioprocesses are reviewed with an emphasis on plastic waste valorization. Understanding how microorganisms metabolize the intermediates of plastic degradation and manage their inhibitory effects is a prerequisite for engineering bioprocesses. For these heterogeneous wastes, a paradigm shift from axenic cultivation of microorganisms to cultivation of microbial consortia may benefit conversion efficiency and stress resilience. Thus, a summary is provided for metabolic pathways and constituent enzymes required to synthesize biofuels, biomaterials, and chemicals from biologically reactive intermediates. Colossal challenges associated with the use of plastics as feedstocks for direct biological processing highlight the need for integrating physical, chemical, and biological technologies.

59 BASIC BIOLOGICAL SCIENCES↗

Life cycle assessment and residue leaching: The importance of parameter, scenario and leaching data selection

Highlights: • Relevance of metal leaching in waste management system LCAs was assessed. • Toxic impacts from leaching could not be disregarded. • Uncertainty of toxicity, due to background activities, determines LCA outcomes. • Parameters such as pH and L/S affect LCA results. • Data modelling consistency and coverage within an LCA are crucial. - Abstract: Residues from industrial processes and waste management systems (WMSs) have been increasingly reutilised, leading to landfilling rate reductions and the optimisation of mineral resource utilisation in society. Life cycle assessment (LCA) is a holistic methodology allowing for the analysis of systems and products and can be applied to waste management systems to identify environmental benefits and critical aspects thereof. From an LCA perspective, residue utilisation provides benefits such as avoiding the production and depletion of primary materials, but it can lead to environmental burdens, due to the potential leaching of toxic substances. In waste LCA studies where residue utilisation is included, leaching has generally been neglected. In this study, municipal solid waste incineration bottom ash (MSWI BA) was used as a case study into three LCA scenarios having different system boundaries. The importance of data quality and parameter selection in the overall LCA results was evaluated, and an innovative method to assess metal transport into the environment was applied, in order to determine emissions to the soil and water compartments for use in an LCA. It was found that toxic impacts as a result of leaching were dominant in systems including only MSWI BA utilisation, while leaching appeared negligible in larger scenarios including the entire waste system. However, leaching could not be disregarded a priori, due to large uncertainties characterising other activities in the scenario (e.g. electricity production). Based on the analysis of relevant parameters relative to leaching, and on general results of the study, recommendations are provided regarding the use of leaching data in LCA studies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗