Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Direct Observation of Elusive (DTBM‐SEGPHOS)CuH Monomer Enables Mechanistic Insights Into Hydrocupration, Aggregation, and Dynamics of Alkene Functionalization Catalysis

The bulky diphosphine DTBM-SEGPHOS is widely employed in CuH-catalyzed transformations as it provides remarkably active catalyst systems. The transient (DTBM-SEGPHOS)CuH monomer (LCuH) is the often-invoked active species. However, its instability has prevented spectroscopic characterization and mechanistic elucidation, hindering mechanistic understanding. We report low-temperature NMR spectroscopic characterization of LCuH, enabling quantitative kinetic analysis of the stoichiometric hydrocupration and catalytic hydroboration of cyclopentene, as well as the structural identification of two CuH clusters. LCuH inserts cyclopentene at −43°C, reaffirming its high reactivity toward olefins. LCuH deactivates to form L 2 Cu 3 H 3 and L 2 Cu 4 H 4 clusters, in which LCuH dimerization initiates aggregation. Kinetic analysis of reactions of unactivated alkenes indicates that competing on-cycle alkene hydrocupration and LCuH dimerization impact performance, as catalyst deactivation and turnover occur on comparable timescales. Structure–activity analysis using atomistic simulations shows that the steric profile of DTBM-SEGPHOS increases the CuH dimerization barrier by ∼7.7 kcal mol−1 compared to that of SEGPHOS, rationalizing the unique ability of DTBM-SEGPHOS to stabilize a reactive monomer for hydrocupration of broader alkene substrates. These findings illustrate the fundamental design principle that steric control of aggregation governs CuH catalyst performance, explaining both the exceptional activity of (DTBM-SEGPHOS)CuH and the limitations imposed by competing deactivation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Capture and isotopic exchange method for water and hydrogen isotopes on zeolite catalysts up to technical scale for pre-study of processing highly tritiated water

Highly tritiated water (HTW) may be generated at ITER by various processes and, due to the excessive radio toxicity, the self-radiolysis and the exceedingly corrosive property of HTW, a potential hazard is associated with its storage and process. Therefore, the capture and exchange method for HTW utilizing Molecular Sieve Beds (MSB) was investigated in view of adsorption capacity, isotopic exchange performance and process parameters. For the MSB, different types of zeolite were selected. All zeolite materials were additionally coated with platinum. The following work comprised the selection of the most efficient zeolite candidate based on detailed parametric studies during the H{sub 2}/D{sub 2}O laboratory scale exchange experiments (about 25 g zeolite per bed) at the Tritium Laboratory Karlsruhe (TLK). For the zeolite, characterization analytical techniques such as Infrared Spectroscopy, Thermogravimetry and online mass spectrometry were implemented. Followed by further investigation of the selected zeolite catalyst under full technical operation, a MSB (about 22 kg zeolite) was processed with hydrogen flow rates up to 60 mol*h{sup -1} and deuterated water loads up to 1.6 kg in view of later ITER processing of arising HTW. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size and morphology controlled NiSe nanoparticles as efficient catalyst for the reduction reactions

Facile and efficient ball milling and polyol methods were employed for the synthesis of nickel selenide (NiSe) nanoparticle. The particle size of the NiSe nanoparticle has been controlled mechanically by varying the ball size in the milling process. The role of the surfactants in the formation of various morphologies was studied. The compounds were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray energy dispersive spectroscopy (EDS). The efficiency of the NiSe nanoparticle as a catalyst was tested for the reduction of para-nitroaniline (PNA) to para-phenyldiamine (PPD) and para-nitrophenol (PNP) to para-aminophenol (PAP) using NaBH{sub 4} as the reducing agent. Particle size, morphology and the presence of surfactant played a crucial role in the reduction process. - Graphical abstract: NiSe nanoparticles in different size and morphology were synthesized using facile ball milling and polyol methods. Particle size, morphology and the presence of surfactant in these materials played a crucial role in the hydrogenation of PNA and PNP. - Highlights: • NiSe nanoparticles synthesized using ball milling and solution phase methods. • NiSe nanoparticle is an efficient catalyst for the reduction of PNA and PNP. • NiSe is found to be better than the best reported noble metal catalysts.

36 MATERIALS SCIENCE↗

Gold nanoparticles-graphene hybrids as active catalysts for Suzuki reaction

Graphene was successfully modified with gold nanoparticles in a facile route by reducing chloroauric acid in the presence of sodium dodecyl sulfate, which is used as both a surfactant and reducing agent. The gold nanoparticles-graphene hybrids were characterized by high-resolution transmission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, X-ray diffraction and energy X-ray spectroscopy. We demonstrate for the first time that the gold nanoparticles-graphene hybrids can act as efficient catalysts for the Suzuki reaction in water under aerobic conditions. The catalytic activity of gold nanoparticles-graphene hybrids was influenced by the size of the gold nanoparticles.

36 MATERIALS SCIENCE↗

Influence of Ink Formulation and Drying Conditions on Ionomer Distribution in High-Performance Roll-to-Roll-Coated Gas-Diffusion Electrodes

To enable mass production of fuel cell membrane electrode assemblies (MEAs) catalyst layers production will require continuous roll-to-roll (R2R) coating processes. Gas diffusion electrodes (GDEs) are advantageous for mass production because the catalyst layer can be directely coated on the microporous layer of the gas diffusion media without the need for a decal-transfer process. It is known that the water-to-alcohol ratio in the catalyst ink influences the interactions of the ionomer with the catalyst leading to different distributions of ionomer in spray-coated catalyst layers. It is also known that during drying of colloidal mixtures, like fuel cell inks, factors such as drying rate, particle size, and agglomeration influence how the materials distribute themselves throughout the thickness of the dired film. Thus far there have only been limited studies to understand how process conditions such as ink formulation and drying temperature influence the distribution of ionomer and catalyst coated using scalable methods. This understanding is especially important for GDEs since it is known that having a sufficient amount of ionomer at the catalyst layer-membrane interface is critical for high performance. In this study we have focused on determining how the ratio of water to 1-propanol in the catalyst ink ink and drying temperature influence the distribution of ionomer throughout the thickness of the catalyst layer. Using a combination of Kelvin probe and x-ray photoelectron spectroscopy we show that an ionomer-rich surface is promoted by a higher drying rate and a water-rich catalyst ink. In contrast, a 1-propanol catalyst ink leads to a lower concentration of ionomer on the top surface. Using x-ray computed tomography, we are able to characterize the ionomer distribution throughout the thickness of the layer. We find that, in addition to promoting an ionomer-rich top surface, water-rich inks lead to a more homogenous distribution of ionomer, whereas a 1-propanol-rich ink leads to a more irregular distribution. It is found that MEA performance is improved by selecting conditions and ink formulations that promote ionomer enrichment at the top surface to facilitate a good interface with the membrane. MEAs prepared with a 75 wt% water catalyst ink with a 0.9 I/C have equivalent performance to spray-coated GDEs. Critically, these R2R-coated GDEs do not need an additional ionomer overlayer like the spray-coated GDEs do, reducing the number of processing steps in a manufacturing setting. This work shows that with the appropriate selection of materials, ink formulation, and processing conditions gas-diffusion electrodes are a viable pathway for fuel cell manufacturing.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗

Electron-Deficient Ru(II) Complexes as Catalyst Precursors for Ethylene Hydrophenylation

Ruthenium(II) complexes with the general formula TpRu(L)(NCMe)Ph (Tp = hydrido(trispyrazolyl)borate, L = CO, PMe 3 , P(OCH 2 ) 3 CEt, P(pyr) 3 , P(OCH 2 ) 2 (O)CCH 3 ) have previously been shown to catalyze arene alkylation via Ru-mediated arene C–H activation including the conversion of benzene and ethylene to ethylbenzene. Previous studies have suggested that the catalytic performance of these TpRu(II) catalysts increases with reduced electron-density at the Ru center. Herein, three new structurally related Ru(II) complexes are synthesized, characterized, and studied for possible catalytic benzene ethylation. TpRu(NO)Ph 2 exhibited low stability due to the facile elimination of biphenyl. The Ru(II) complex (Tp Br3 )Ru(NCMe)(P(OCH 2 ) 3 CEt)Ph (Tp Br3 = hydridotris(3,4,5-tribromopyrazol-1-yl)borate) showed no catalytic activity for the conversion of benzene and ethylene to ethylbenzene, likely due to the steric bulk introduced by the bromine substituents. (Ttz)Ru(NCMe)(P(OCH 2 ) 3 CEt)Ph (Ttz = hydridotris(1,2,4-triazol-1-yl)borate) catalyzed approximately 150 turnover numbers (TONs) of ethylbenzene at 120 °C in the presence of Lewis acid additives. Here, we compare the activity and features of catalysis using (Ttz)Ru(NCMe)(P(OCH 2 ) 3 CEt)Ph to previously reported catalysis based on TpRu(L)(NCMe)Ph catalyst precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Walled Zeolitic Nanotube–Poly(oxazoline) Nanocomposites as Heterogeneous Catalysts for Acid–Base Cascade Reactions

Zeolites with a unique, 1-dimensional form factor were recently discovered − zeolite nanotubes (ZNTs). Here we describe the synthesis and characterization of NaH-ZNTpoly( oxazoline) composites targeting liquid-phase acid−base cascade catalysis. NaH-ZNT, a one-dimensional zeolite analogue with mesoporosity (3−4 nm) associated with nanotubes and inherent Brønsted acid sites associated with the microporous zeolite domains, is functionalized with poly(oxazoline)-based triblock copolymers with varying molecular weights (3−17 kDa). The composites are characterized using N2 sorption, STEM, FTIR, and elemental analysis, confirming successful grafting and preservation of the zeolite nanotube structure. The composites’ catalytic performance is evaluated through separate acid and base reactions, followed by a combined cascade of a deacetalization−Knoevenagel condensation for the synthesis of chalcone compounds. High initial reaction rates are demonstrated, but modest overall cascade product formation rates are observed, attributed to interactions between Brønsted acid sites and base amine groups that occur in the polymer-grafted systems. Physical mixtures of NaH-ZNT-SH and poly(oxazoline)s, lacking covalent linkages between ZNT and the polymer, support this supposition. This work demonstrates the potential of NaH-ZNT-poly(oxazoline) composites for liquid-phase cascade catalysis for synthesizing compounds of potential medicinal interest, highlighting the benefits of the grafting-to approach as well as the need for further optimization of the catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of Surface Structures in Pt 3 Cr Intermetallic Nanocatalysts

A precise understanding of the catalytic surface of nanoparticles is essential for relating their structure to activity. For silica-supported Pt-Cr bimetallic catalysts containing nominal Cr/Pt molar ratios of 0, 1.9, and 5.6, a fundamental difference in selectivity was observed as a function of composition for propane dehydrogenation, suggesting different surface structures. The formation of bimetallic catalysts and the phases present were confirmed by synchrotron in situ X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) of the nanoparticle as a function of reduction temperature. With the increasing reduction temperature, there is a systematic increase in the Pt L- III edge X-ray absorption near edge structure (XANES) energy, which is consistent with the incorporation of more metallic Cr into the nanoparticles, Pt L- III edge extended X-ray absorption fine structure (EXAFS) shows that the nanoparticles are Pt rich regardless of the reduction temperature, and XRD shows the presence of both Pt and Pt 3 Cr phases at temperatures below about 700 °C. For the latter, a full Pt 3 Cr intermetallic alloy forms after reduction at 800 °C. This work additionally proposes a method for the characterization of the catalytic surface by the analysis of XAS difference spectra and XRD difference patterns of the (reduced and oxidized) catalysts. The surface analysis suggests that Pt 3 Cr formation begins at the surface, and at low reduction temperatures, a core-shell morphology is formed containing a Pt core with a Pt 3 Cr surface. By combining the XAS and XRD analyses with transmission electron microscopy (TEM) particle sizes, the thickness of the shell can be approximated. All evidence indicates that the shell thickness increases with the increasing reduction temperature until a full alloy is formed after reduction at about 800 °C but only if there is enough Cr 2 O 3 available near Pt nanoparticles to form Pt 3 Cr. Catalysts containing a full monolayer coverage of Pt 3 Cr have higher olefin selectivity (>97%) compared with partially covered Pt surfaces (88%).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reducing the deactivation of Ni-metal during the catalytic partial oxidation of a surrogate diesel fuel mixture

Ni catalysts are active and selective for the conversion of hydrocarbon into synthesis gas. However, conventional supported Ni catalysts rapidly deactivate at the high temperatures required for partial oxidation of diesel fuel by sintering and metal vaporization, as well as by carbon deposition and sulfur poisoning. Thus, to reduce deactivation Ni (3 wt%) was substituted into the structures of Ba-hexaaluminate (BNHA) and La–Sr–Zr pyrochlore (LSZN), and their activity was compared to a supported Ni/Al 2 O 3 for the catalytic partial oxidation (CPOX) of a surrogate diesel fuel. Characterization by XRD showed a single phase β-alumina for the hexaaluminate, while LSZN had a pyrochlore structure with a defect SrZrO 3 perovskite phase. Temperature programmed reduction experiments confirmed Ni was reducible in all catalysts. XANES results confirmed that Ni atoms were substituted into the hexaaluminate and pyrochlore structures, as spectra for each catalyst showed different coordination environments for Ni compared to a NiO standard. During CPOX activity tests (T = 900 °C and WHSV = 50,000 scc/g cat /h), the LSZN pyrochlore produced stable H 2 and CO yields in the presence of 5 wt% 1-methylnaphthalene and 50 ppmw dibenzothiophene/n-tetradecane for 2 h, while both Ni/Al 2 O 3 and BNHA catalysts were irreversibly deactivated by this mixture over the same time. Finally, activity loss was strongly linked to carbon formation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Abstract - Cooperative Research and Development Agreement between Princeton University and National Energy Technology Laboratory

This research effort will develop a novel nanodischarge reactor loaded with nanotemplated catalysts to achieve high-efficiency plasma-enhanced conversion of CO2 and methane for the production of chemicals or fuels. The primary objective of this study is to demonstrate low temperature operation of a novel nanoplasma catalysis reactor that is characterized by a uniform discharge. Another objective is to address the most significant challenge in the plasma-catalysis hybrid system, which is to achieve the strongest synergistic interaction between the plasma and catalyst and to increase the selectivity for producing methanol and alkanes/alkenes. This enhanced synergy will be enabled by using bimetallic nanoparticles synthesized on nanorods present on surfaces of a nanotemplated oxide support.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cooperative Research and Development Agreement between National Energy Technology Laboratory and The Trustees of Princeton University (Final Report)

This research effort will develop a novel nanodischarge reactor loaded with nanotemplated catalysts to achieve high-efficiency plasma-enhanced conversion of CO2 and methane for the production of chemicals or fuels. The primary objective of this study is to demonstrate low temperature operation of a novel nanoplasma catalysis reactor that is characterized by a uniform discharge. Another objective is to address the most significant challenge in the plasma-catalysis hybrid system, which is to achieve the strongest synergistic interaction between the plasma and catalyst and to increase the selectivity for producing methanol and alkanes/alkenes. This enhanced synergy will be enabled by using bimetallic nanoparticles synthesized on nanorods present on surfaces of a nanotemplated oxide support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon microspheres from ethanol at low temperature: Fabrication, characterization and their use as an electrocatalyst support for methanol oxidation

Highlights: ► Carbon microbeads were prepared by the carbonization of ethanol at low temperature. ► The low temperature carbonization of ethanol was catalyzed by iodine. ► Carbon microbeads can serve as ideal candidate for catalyst supports. -- Abstract: Carbon microspheres (CMSs) with a diameter range of 2–3 μm were prepared by the iodine-catalyzed carbonization of ethanol at low temperatures by solvothermal synthesis. The reaction time, concentrations of reactants, temperatures, different alcohols as carbon precursors and reaction environments were systematically altered to determine the optimal synthesis conditions. The size and shape were characterized by scanning and transmission electron microscopy and their structure was characterized by X-ray powder diffraction and Raman spectroscopy. Energy dispersive X-ray spectroscopy, Fourier transform infrared and X-ray photoelectron spectroscopy showed that abundant oxygen-containing functional groups remain on the surface of the carbon spheres. The formation mechanism involves iodine promotion of the oxidation of ethanol, which results in formation of the CMSs. The specific activity of the CMS-supported Pt catalyst is higher than that of a commercial Pt catalyst from E-TEK or the unsupported Pt catalyst.

36 MATERIALS SCIENCE↗

Unveiling the Degradation Nature of Pt/NbOx/C Catalysts for Oxygen Reduction Reaction via in situ X-ray Absorption Spectroscopy

Among various metal nanoparticles supported on metal oxide (MMO) catalysts, the Pt/NbOx/C system has promising oxygen reduction reaction (ORR) activity as cathode for proton exchange membrane fuel cells (PEMFCs). Herein, we study a series of Pt/NbOx/C catalysts with tunable structural and electronic properties via physical vapor deposition and unravel the nature of metal and metal oxide interaction (MMOI) by characterizing this system under reactive conditions. By conducting in situ X-ray absorption spectroscopy (XAS) experiments, we demonstrate the Pt preferably interacts with O but not Nb in the Pt/NbOx/C system and such Pt-O interaction benefits the ORR activity via electronic effect rather than strain effect. We also provide clear evidence for the formation of metallic Nb phase at the early stage of PEMFC operation and identify severe particle growth of Pt after long-term PEMFC operation. These findings deepen our understanding of the degradation mechanism of MMO catalysts during long-term PEMFC operation.

MMO catalyst↗

Tandem Catalytic Antioxidant Nanoparticles Comprising Cerium Carbonate and Photoactive Metal Oxides

While photoactive metal oxides such as TiO 2 find widespread use in paints and coatings as well as cosmetics and suncare products, they also generate reactive oxygen species (ROS), which degrade materials and are associated with human-health pathologies. Here, we demonstrate a robust and potent catalytic antioxidant consisting of earth-abundant cerium carbonate nanoparticles and micron-size Ce 2 (CO 3 ) 3 . 8H 2 O, which are characterized by powder X-ray diffraction and scanning nanobeam electron diffraction. When dispersed with photoactive metal oxides, these cerium carbonate catalysts decrease the photodecomposition rate of organic dyes and commercial pigment colorants in aqueous media by up to 820-fold, as well as in acrylic coatings. X-ray photoelectron spectroscopy and kinetic experiments support the same tandem catalysis mechanism of photoprotection when using both micron-size Ce 2 (CO 3 ) 3 . 8H 2 O and cerium carbonate nanoparticles. This mechanism involves ROS disproportionation (catalyzed by cerium carbonate) and H 2 O 2 decomposition (partially catalyzed by TiO 2 ) pathways, both of which cerium carbonate also catalyzes on its own, crudely mimicking the function of the cascade system of superoxide dismutase and catalase enzymes. When cerium carbonate nanoparticles were dispersed at 2 wt % in polymethylmethacrylate, the transparency of the polymer film was preserved and the photo-oxidative degradation of the polymer was prevented following UV irradiation at 254 nm, which otherwise resulted in the loss of optical properties and hydroxylation as characterized by ATR-FTIR spectroscopy, in the control polymer lacking cerium carbonate. Similar observations were made regarding color preservation in paint films comprising dye and insoluble commercial colorant pigments. The material chemistry associated with this photoprotection catalysis is subtle and emphasizes the importance of both Ce(III) and carbonate together, as both CePO 4 and Na 2 CO 3 are inactive. In conclusion, this emphasis is also apparent in comparisons of photoprotection catalysis with previously reported cerium oxide nanoparticles, which are significantly less active compared with Ce 2 (CO 3 ) 3 . 8H 2 O under the same conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of anionic/nonionic surfactant-interceded iron-doped TiO{sub 2} to enhance sorbent/photo-catalytic properties

We investigated the synthesis, characterization, and application of surfactant-interceded Fe nanoparticle-doped TiO{sub 2} (TiO{sub 2}/Fe-S1 and TiO{sub 2}/Fe-S2) that were used as adsorbents and photo-catalysts for the removal of As(V) ions from aqueous media. Two types of surfactant (anionic (sodium dodecyl sulfate), S1 and non-ionic (Triton X-100), S2) were used to obtain the separation and mono-dispersion of Fe(III) ions in the reaction solution. The nanocomposites were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), UV–vis, scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) and elemental mapping analysis before and after As(V) removal. The Langmuir capacities (q{sub e}, mg/g) of the sodium dodecyl sulfate (SDS) and Triton X-100 interceded nanocomposites (TiO{sub 2}/Fe-S1 and TiO{sub 2}/Fe-S2, respectively) for arsenic removal were determined to be 65.79 and 50.76 mg/g, respectively, in aqueous media with As(V) concentration ranges of 0–10 mg/L at pH 6.5. - Highlights: • Fe(III) doped TiO{sub 2} nanocomposite was prepared with surfactant. • Anionic surfactant SDS enhanced the transfer of Fe(III) ions to TiO{sub 2}. • Surfactant-interceded nanocomposite enhanced As(V) removal. • Arsenic removal efficiency was as follows: dark phase>visible phase>UV region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗