Search NASA⌕ Search

SEARCH · Search NASA

Results for “data versions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Analysis of Multivariate Experimental Data Using A Simplified Regression Model Search Algorithm

A new regression model search algorithm was developed that may be applied to both general multivariate experimental data sets and wind tunnel strain-gage balance calibration data. The algorithm is a simplified version of a more complex algorithm that was originally developed for the NASA Ames Balance Calibration Laboratory. The new algorithm performs regression model term reduction to prevent overfitting of data. It has the advantage that it needs only about one tenth of the original algorithm's CPU time for the completion of a regression model search. In addition, extensive testing showed that the prediction accuracy of math models obtained from the simplified algorithm is similar to the prediction accuracy of math models obtained from the original algorithm. The simplified algorithm, however, cannot guarantee that search constraints related to a set of statistical quality requirements are always satisfied in the optimized regression model. Therefore, the simplified algorithm is not intended to replace the original algorithm. Instead, it may be used to generate an alternate optimized regression model of experimental data whenever the application of the original search algorithm fails or requires too much CPU time. Data from a machine calibration of NASA's MK40 force balance is used to illustrate the application of the new search algorithm.

Ulbrich, Norbert M.↗

Implementation of Coupled Skin Temperature Analysis and Bias Correction in a Global Atmospheric Data Assimilation System

The NASA/NCAR Finite Volume GCM (fvGCM) with the NCAR CLM (Community Land Model) version 2.0 was integrated into the NASA/GMAO Finite Volume Data Assimilation System (fvDAS). A new method was developed for coupled skin temperature assimilation and bias correction where the analysis increment and bias correction term is passed into the CLM2 and considered a forcing term in the solution to the energy balance. For our purposes, the fvDAS CLM2 was run at 1 deg. x 1.25 deg. horizontal resolution with 55 vertical levels. We assimilate the ISCCP-DX (30 km resolution) surface temperature product. The atmospheric analysis was performed 6-hourly, while the skin temperature analysis was performed 3-hourly. The bias correction term, which was updated at the analysis times, was added to the skin temperature tendency equation at every timestep. In this presentation, we focus on the validation of the surface energy budget at the in situ reference sites for the Coordinated Enhanced Observation Period (CEOP). We will concentrate on sites that include independent skin temperature measurements and complete energy budget observations for the month of July 2001. In addition, MODIS skin temperature will be used for validation. Several assimilations were conducted and preliminary results will be presented.

Radakovich, Jon↗

GPCP Version 3.2 Products and Results

The Global Precipitation Climatology Project (GPCP) products address the need for long-term precipitation products that emphasize homogeneity, following Climate Data Record (CDR) principles. The new-generation Version 3.2 provides key improvements over the operational Version 2.3 such as: finer spatial resolution of 0.5°x0.5°; wider geosynchronous infrared estimation (58°N-S) upgraded with the PERSIANN-CDR algorithm; upgraded retrievals from selected passive microwave sensors (GPROF algorithm) that calibrate the IR input; revised intercalibrations of TOVS and AIRS data (used at high latitudes); climatologies based on CloudSat, TRMM, and GPM to provide overall calibration by modern satellite estimates; the latest Global Precipitation Climatology Centre (GPCC) precipitation gauge analyses over land areas; regional modifications to the gauge undercatch correction; and IMERG half-hourly data input to the Daily V3.2 product. We will show sample analyses that demonstrate aspects of the Version 3.2 precipitation record, such as the global climatology, the time series for global land and ocean total precipitation and snowfall, and the time series of tropical land and ocean daily precipitation rate histograms. For selected analyses we will show improvements in both the Monthly and Daily products in Version 3.2 compared to the operational Version 2.3. In particular, the climatological zonal profile of precipitation in the Southern Ocean, extending south of 40°S, improves a suspected artifact in V2.3. Similarly, the Daily histograms over ocean in Version 3.2 lack the jump in the predecessor Version 1.3 Daily over ocean at the start of 2009, although a smaller jump is introduced in June 2014. The presentation will conclude with a prospectus for the future satellites/sensors and community datasets necessary to continue computation of a consistent CDR product on the one hand, while also potentially contributing to improvements in the historical record.

Global Precipitation Measurement↗

Importance of a Priori Vertical Ozone Profiles for TEMPO Air Quality Retrievals

Ozone (O3) is a toxic pollutant which plays a major role in air quality. Typically, monitoring of surface air quality and O3 mixing ratios is conducted using in situ measurement networks. This is partially due to high-quality information related to air quality being limited from space-borne platforms due to coarse spatial resolution, limited temporal frequency, and minimal sensitivity to lower tropospheric and surface-level O3. The Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite is designed to address the limitations of current space-based platforms and to improve our ability to monitor North American air quality. TEMPO will provide hourly data of total column and vertical profiles of O3 with high spatial resolution to be used as a near-real-time air quality product. TEMPO O3 retrievals will apply the Smithsonian Astrophysical Observatory profile algorithm developed based on work from GOME (Global Ozone Monitoring Experiment), GOME-2, and OMI (Ozone Monitoring Instrument). This algorithm is suggested to use a priori O3 profile information from a climatological data-base developed from long-term ozone-sonde measurements (tropopause-based (TB-Clim) O3 climatology). This study evaluates the TB-Clim dataset and model simulated O3 profiles, which could potentially serve as a priori O3 profile information in TEMPO retrievals, from near-real-time data assimilation model products (NASA GMAO's (Global Modeling and Assimilation Office) operational GEOS-5 (Goddard Earth Observing System, Version 5) FP (Forecast Products) model and reanalysis data from MERRA2 (Modern-Era Retrospective analysis for Research and Applications, Version 2)) and a full chemical transport model (CTM), GEOS-Chem. In this study, vertical profile products are evaluated with surface (0-2 kilometers) and tropospheric (0-10 kilometers) TOLNet (Tropospheric Ozone Lidar Network) observations and the theoretical impact of individual a priori profile sources on the accuracy of TEMPO O3 retrievals in the troposphere and at the surface are presented. Results indicate that while the TB-Clim climatological dataset can replicate seasonally-averaged tropospheric O3 profiles, model-simulated profiles from a full CTM resulted in more accurate tropospheric and surface-level O3 retrievals from TEMPO when compared to hourly and daily-averaged TOLNet observations. Furthermore, it is shown that when large surface O3 mixing ratios are observed, TEMPO retrieval values at the surface are most accurate when applying CTM a priori profile information compared to all other data products.

Priori↗

Local Data Integration in East Central Florida Using the ARPS Data Analysis System

This paper describes the Applied Meteorology Unit's (AMU) efforts to configure, implement, and test a version of the Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS; Brewster 1996) that assimilates all available data within 250 km of the Kennedy Space Center (KSC) and the Eastern Range at Cape Canaveral Air Station (CCAS). The objective for running a Local Data Integration System (LDIS) such as ADAS is to generate products which may enhance weather nowcasts and short-range (less than 6 h) forecasts issued in support of ground and aerospace operations at KSC/CCAS. A LDIS such as ADAS has the potential to provide added value because it combines observational data to produce gridded analyses of temperature, wind, and moisture (including clouds) and diagnostic quantities such as vorticity, divergence, etc. at specified temporal and spatial resolutions. In this regard, a LDTS along with suitable visualization tools may provide users with a ignore complete and comprehensive understanding of evolving weather than could be developed by individually examining the disparate data sets over the same area and time. The AMU implemented a working prototype of the ADAS which does not run in real-time. Instead, the AMU is evaluating ADAS through post-analyses of weather events for a warm and cool season case. The case studies were chosen to investigate the capabilities and limitations of a LDIS such as ADAS including the impact of non-incorporation of specific data sources on the utility of the subsequent analyses.

Case, Jonathan↗

iSPECTRON: a simulation interface for linear and nonlinear spectra with ab-initio quantum chemistry software

We introduce iSPECTRON, an open source (under the Educational Community License version 2.0) program that parses data from common quantum chemistry software (NWChem, OpenMolcas, Gaussian, Cobramm, etc.), produces the input files for the simulation of linear and nonlinear spectroscopy of molecules with the Spectron code, and analyzes the spectra with a broad range of tools. Vibronic spectra are expressed in term of the electronic eigenstates, obtained through quantum chemistry computations, and vibrational/bath effects are incorporated in the framework of the displaced harmonic oscillator model, where all required quantities are computed at the Franck-Condon point. The code capabilities are illustrated by simulating linear absorption, transient absorption and two dimensional electronic spectra of the pyrene molecule. Two levels of electronic structure theory, TDDFT (with NWChem) and RASSCF/RASPT2 (with OpenMolcas), are compared where possible. Acknowledgements: F.S., A.N., D.R.N., N.G., S.M, M.G. acknowledge support from the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division under Award Nos. DE-SC0019484, KC-030103172684. The Spectron code was developed with support from the National Science Foundation (Grant CHE- 1953045). This research benefited from computational resources provided by EMSL, a DOE Office of Science User Facility sponsored by the Office of Biological and Environmental Research and located at PNNL. PNNL is operated by Battelle Memorial Institute for the United States Department of Energy under DOE Contract No. DE-AC05-76RL1830.

Segatta, Francesco↗

A 3D Computational Head Model Under Dynamic Head Rotation and Head Extension Validated Using Live Human Brain Data, Including the Falx and the Tentorium

We employ an advanced 3D computational model of the head with high anatomical fidelity, together with measured tissue properties, to assess the consequences of dynamic loading to the head in two distinct modes: head rotation and head extension. We use a subject-specific computational head model, using the material point method, built from T1 magnetic resonance images, and considering the anisotropic properties of the white matter which can predict strains in the brain under large rotational accelerations. The material model now includes the shear anisotropy of the white matter. We validate the model under head rotation and head extension motions using live human data, and advance a prior version of the model to include biofidelic falx and tentorium. Furthermore we then examine the consequences of incorporating the falx and tentorium in terms of the predictions from the computational head model.

61 RADIATION PROTECTION AND DOSIMETRY↗

Atomic data and spectral line intensities for Ni XIV

Electron impact collision strengths, energy levels, oscillator strengths, and spontaneous radiative decay rates are calculated for Ni XIV. We include in the calculations all the configurations belonging to the n=3 complex, and provide data for the lowest 143 fine-structure levels, belonging to the configurations 3s{sup 2}3p{sup 3}, 3s3p{sup 4}, 3s{sup 2}3p{sup 2}3d, 3p{sup 5}, 3s3p{sup 3}3d, and 3s{sup 2}3p3d{sup 2}. Collision strengths are calculated at six incident energies for all transitions: 0.112, 8.07, 21.3, 43.4, 80.3, and 141.8 Ry above the threshold of each transition. Calculations have been carried out using the Flexible Atomic Code. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates of the present work, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10{sup 8}-10{sup 14} cm{sup -3} and at an electron temperature of logT{sub e}(K)=6.3, corresponding to the maximum abundance of Ni XIV. Spectral line intensities are calculated, and their diagnostic relevance is discussed. This data set is available in version 6.0 of the CHIANTI database.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

KALYPSO: Linear array detector for high-repetition rate and real-time beam diagnostics

Synchrotrons and modern FEL light sources operate with bunch repetition rates in the MHz range. The profile of the electron beam inside the accelerator can be characterized with indirect experimental techniques where linear array detectors are employed to measure the emitted synchrotron radiation or the spectrum of a near-IR laser. To improve the performance of modern beam diagnostics we have developed KALYPSO, a detector system operating with a continuous frame rate of up to 2.7 MHz. To facilitate the integration in different experiments, a modular architecture has been adopted. Different semiconductor micro-strip sensors can be connected to front-end ASICs to optimize the quantum efficiency at different photon energies, ranging from visible light up to near-IR. The front-end electronics are integrated within an heterogeneous DAQ consisting of FPGAs and GPUs, which allows scientists to implement real-time data processing algorithms. The current version of the detector is in operation at the KARA synchrotron light source and at the European XFEL. Finally, in this contribution we present the detector architecture, the performance results and the on-going technical developments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enthalpy of Formation of C 2 H 2 O 4 (Oxalic Acid) from High-Level Calculations and the Active Thermochemical Tables Approach

High-level coupled cluster calculations obtained with the Feller–Peterson–Dixon (FPD) approach and new data from the most recent version of the Active Thermochemical Tables (ATcT) are used to reassess the enthalpy of formation of gas-phase C 2 H 2 O 4 (oxalic acid). The theoretical value was further calibrated by comparing FPD and ATcT gas-phase enthalpies of formation for H 2 CO (formaldehyde) and the two low-lying conformations of C 2 H 4 O 2 ( syn and anti acetic acid). The FPD approach produces a theoretical enthalpy of formation of gas-phase oxalic acid of –732.2 ± 4.0 kJ/mol at 298.15 K (–721.8 ± 4.0 kJ/mol at 0 K). An independently obtained ATcT value, based on reassessing the existent experimental determinations and expanding the resulting thermochemical network with select mid-level composite theoretical results, disagrees with several earlier recommendations that were based solely on experimental determinations but is in excellent accord with the current FPD value. The inclusion of the latter in the most recent ATcT thermochemical network produces a further refined value for the gas-phase enthalpy of formation, –731.6 ± 1.2 kJ/mol at 298.15 K (–721.0 ± 1.2 kJ/mol at 0 K). In conclusion, the condensed-phase ATcT enthalpy of formation of oxalic acid is –829.7 ± 0.5 kJ/mol, and the resulting sublimation enthalpy is 98.1 ± 1.3 kJ/mol, both at 298.15 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Subseasonal Tropical Convection Characteristics in the Energy Exascale Earth System Model Version 2

Accurate simulation of subseasonal tropical moist convection remains a key challenge for Earth system models. The difficulties stem from the reliance of cumulus cloud processes on model parameterizations and the need to represent the multiscale nature of interactions among clouds, radiation, moisture, circulation, and surface energy fluxes. Equatorial convection drives circulation anomalies that can affect weather patterns and extremes globally, motivating efforts to better understand and simulate these tropical disturbances. Here, a detailed review of subseasonal tropical convective behavior as simulated in the Energy Exascale Earth System Model version 2 (E3SMv2) is presented, with comparison to its predecessor version 1 (E3SMv1) and reference data sets. Model structural changes to the deep convective trigger function and surface fluxes, along with parametric tuning of the cloud and microphysics schemes, together result in an improved depiction of organized tropical convection across scales. In particular, E3SMv2 exhibits a more realistic Madden‐Julian oscillation (MJO) and low‐frequency Kelvin waves—owing to a sharper time mean equatorial meridional moisture gradient and improved convection‐circulation coupling —as well as a better depiction of MJO Northern Hemisphere teleconnections. Despite these improvements, subseasonal precipitation variance continues to be strongly underestimated in E3SMv2. Use of a cloud plume model also reveals that the coupling between daily averaged tropical precipitation and lower tropospheric instability in E3SM is inconsistent with observations, a bias that could potentially impact the simulation of intraseasonal disturbances.

54 ENVIRONMENTAL SCIENCES↗

ON ESTIMATING THE HIGH-ENERGY CUTOFF IN THE X-RAY SPECTRA OF BLACK HOLES VIA REFLECTION SPECTROSCOPY

The fundamental parameters describing the coronal spectrum of an accreting black hole are the slope Γ of the power-law continuum and the energy E{sub cut} at which it rolls over. Remarkably, this latter parameter can be accurately measured for values as high as 1 MeV by modeling the spectrum of X-rays reflected from a black hole accretion disk at energies below 100 keV. This is possible because the details in the reflection spectrum, rich in fluorescent lines and other atomic features, are very sensitive to the spectral shape of the hardest coronal radiation illuminating the disk. We show that by fitting simultaneous NuSTAR (3–79 keV) and low-energy (e.g., Suzaku) data with the most recent version of our reflection model relxill one can obtain reasonable constraints on E{sub cut} at energies from tens of keV up to 1 MeV, for a source as faint as 1 mCrab in a 100 ks observation.

79 ASTRONOMY AND ASTROPHYSICS↗

Realistic lattice determination of {alpha}{sub s}(M{sub Z}) revisited

We revisit the earlier determination of {alpha}{sub s}(M{sub Z}) via perturbative analyses of short-distance-sensitive lattice observables, incorporating new lattice data and performing a modified version of the original analysis. We focus on two high-intrinsic-scale observables, log(W{sub 11}) and log(W{sub 12}), and one lower-intrinsic-scale observable, log(W{sub 12}/u{sub 0}{sup 6}), finding improved consistency among the values extracted using the different observables and a final result, {alpha}{sub s}(M{sub Z})=0.1192{+-}0.0011, {approx}2{sigma} higher than the earlier result, in excellent agreement with recent nonlattice determinations and, in addition, in good agreement with the results of a similar, but not identical, reanalysis by the HPQCD Collaboration. A discussion of the relation between the two reanalyses is given, focusing on the complementary aspects of the two approaches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

EXCHANGE Campaign 2 - Microbial Biomass Collapse (EC2-MBC): Carbon Availability Under Prolonged Flooding in Mid-Atlantic and Great Lakes Coastal Ecosystems

Our collective research focus is on investigating the interaction between carbon availability and microbial demands during prolonged flooding. Through laboratory experiments utilizing freshly collected soil samples from diverse transition zone environments, we aim to simulate flooding and understand the mechanisms governing carbon cycling under anoxic conditions. Our primary objective is to elucidate how carbon becomes available to microbes and how they utilize it, discerning between maintenance and investment processes. By examining soils from regions with differing native redox conditions, our aim is to gain comprehensive insights into carbon dynamics across various soil types. Future data types will be added to the ESS-DIVE data package as they are completed and will be version-controlled in the Change History section of EC2_MBC_README.pdf. This data package includes: EC2_MBC_README.pdf flmd.csv dd.csv EC2_SampleIdentificationKey.csv EC2_SoilMoistureKey.csv Processed_GHGFlux_Entisols.csv Processed_GHGFlux_Inceptisols.csv Processed_GHGFlux_Ultisols.csv Processed_Porewater_Iron_II.csv Processed_Porewater_Nutrients.csv Processed_Porewater_Sulfate.csv Processed_Probe_Measurements.csv Processed_Soil_HydrolyticEnzymes.csv Processed_Soil_MicrobialCN.csv Processed_Soil_NPOC_TN_SaltExtracted.csv Processed_Soil_NPOC_TN_WaterExtracted.csv Processed_Soil_Nutrients_OlsenPExtracted.csv Processed_Soil_Nutrients_SaltExtracted.csv Processed_Soil_Nutrients_WaterExtracted.csv Processed_DO_Probe.zip Processed_Temperature_Probe.zip

Carbon Cycling↗

AmeriFlux US-Ton Tonzi Ranch

This is the AmeriFlux version of the carbon flux data for the site US-Ton Tonzi Ranch. Site Description - The Tonzi Ranch is located on the lower foothills of the Sierra Nevada Mountains. The site is classified as an oak savanna woodland (Davis et al, 2016) and is situated on privately owned land. This site is representative of the oak savanna ecosystem that rings the Great Central Valley of California and inhabits the lower reaches of the Sierra Nevada foothills. This ecosystem is a natural laboratory for studying how ecosystem scale carbon and water fluxes respond to environmental change. The temperatures range between 0 and 40 C, the autumn, winter and spring are wet and cool, while the summer growing season is hot, dry and rainless. The overstory is dominated by blue oak trees (40% of total vegetation) with intermittent grey pine trees (3 trees/ha). Understory species include a variety of grasses and herbs, including purple false brome, smooth cat's ear, and rose clover. These two distinctive layers operate in and out of phase from one another. Growing season of the understory is confined to the wet season only, typically from October to early May. In contrast, the deciduous blue oak trees are dormant and leafless during the rainy winter months. The trees tend to leaf out in March and reach maximum LAI in April. During the rainless summers, the grasses in the understory die and the leaves experience soil moisture deficit stress References Davis, F., et al. (2016). "Oak woodlands." Ecosystems of California: 509–529.

Ma, Siyan↗

AmeriFlux US-Var Vaira Ranch- Ione

This is the AmeriFlux version of the carbon flux data for the site US-Var Vaira Ranch- Ione. Site Description - Located in the lower foothills of the Sierra Nevada Mountains on privately owned land, the Vaira Ranch site is classified as a grassland dominated by C3 annual grasses. Managed by local rancher, Fran Vaira, brush has been periodically removed for cattle grazing. Species include a variety of grasses and herbs, including purple false brome, smooth cat's ear, and rose clover. Growing season is confined to the wet season only, typically from October to early May.

Ma, Siyan↗

AmeriFlux BR-Sa1 Santarem-Km67-Primary Forest

This is the AmeriFlux version of the carbon flux data for the site BR-Sa1 Santarem-Km67-Primary Forest. Site Description - The LBA Tapajos KM67 Mature Forest site is a closed-canopy terra firme (upland) forest, located in the FLONA Tapajos, or National Forest, a 450,000 ha government conservation unit in the Brazilian Amazon. Bounded by the Tapajos River in the west and highway BR-163 to the east, the tower is located on a flat plateau (or planalto) that extends up to 40 km to the north, south, and east. The forest at the tower site is classified as primary or "old-growth"" predominantly by its uneven age distribution, emergent trees, numerous epiphytes and abundant large logs. In January 2006 and again in November 2023, falling trees hit the tower guy wires destroying the tower and halting measurements. In each case, the tower was restored and measurements resumed, first in August of 2008 (enabled by a Partnership for International Research and Education, or PIRE, grant from the U.S. National Science Foundation) and again in June 2024.

Restrepo-Coupe, Natalia↗

AmeriFlux BR-Sa3 Santarem-Km83-Logged Forest

This is the AmeriFlux version of the carbon flux data for the site BR-Sa3 Santarem-Km83-Logged Forest. Site Description - Cleared forest. Logged site is near km 83 along BR-183.

Goulden, Mike↗