Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Solubility of U(VI) in chloride solutions. III. The stable oxides/hydroxides in MgCl 2 systems: Pitzer activity model for the system UO 2 2+ –Na + –K + –Mg 2+ –H + –OH – –Cl – –H 2 O(l)

Here we have developed new chemical, thermodynamic and activity models for the system UO 2 2+ –Na + –K + –Mg 2+ –H + –OH – –Cl – –H 2 O(l) within the Pitzer approach. The new thermodynamic model is based on previously reported data treated within the SIT approach for NaCl and KCl systems, as well as on new experimental data determined in this work for the MgCl 2 system. The solubility of uranium(VI) was studied in 0.01–5.15 mol·kg w –1 MgCl 2 solutions at pH m = 4.1–9.7 (with pH m = –log [H + ]). Experiments were performed under Ar atmosphere at T = (22 ± 2) °C. In all investigated systems, the solubility of U(VI) is controlled by metaschoepite, UO 3 ·2H 2 O(cr). In contrast to previously investigated NaCl and KCl systems, no ternary Mg–U(VI)–OH(s) solid phases formed in alkaline MgCl 2 solutions within the timeframe of this study (≤ 200 days). A very significant increase in the solubility (up to 3 log 10 -units) is observed in acidic to near-neutral pH m conditions when increasing MgCl 2 concentration from 0.01 to 5.15 mol·kg w –1 , which reflects the strong ion interaction processes taking place in concentrated MgCl 2 brines. The solubility of UO 3 ·2H 2 O(cr) in the investigated NaCl, KCl and MgCl 2 solutions is well described with the solubility and hydrolysis constants recommended by Altmaier et al., (2017) and NEA–TDB, and a Pitzer activity model derived in the present work. The latter model considers experimental data reported in the present study and available in the literature for NaCl, KCl and MgCl 2 systems (solubility, potentiometric and spectroscopic data), in combination with well-stablished estimation methods and correlations with SIT coefficients. Finally, chemical, thermodynamic and Pitzer activity models provided in this work for the system UO 2 2+ –Na + –K + –Mg 2+ –H + –OH – –Cl – –H 2 O(l) accurately describe all evaluated datasets, and represent an adequate tool for the calculation of U(VI) solubility and aqueous speciation in a variety of geochemical conditions including concentrated brine systems of relevance in salt-based repositories for nuclear waste disposal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Autonomous hybrid optimization of a SiO 2 plasma etching mechanism

Computational modeling of plasma etching processes at the feature scale relevant to the fabrication of nanometer semiconductor devices is critically dependent on the reaction mechanism representing the physical processes occurring between plasma produced reactant fluxes and the surface, reaction probabilities, yields, rate coefficients, and threshold energies that characterize these processes. The increasing complexity of the structures being fabricated, new materials, and novel gas mixtures increase the complexity of the reaction mechanism used in feature scale models and increase the difficulty in developing the fundamental data required for the mechanism. This challenge is further exacerbated by the fact that acquiring these fundamental data through more complex computational models or experiments is often limited by cost, technical complexity, or inadequate models. In this paper, we discuss a method to automate the selection of fundamental data in a reduced reaction mechanism for feature scale plasma etching of SiO 2 using a fluorocarbon gas mixture by matching predictions of etch profiles to experimental data using a gradient descent (GD)/Nelder–Mead (NM) method hybrid optimization scheme. These methods produce a reaction mechanism that replicates the experimental training data as well as experimental data using related but different etch processes.

36 MATERIALS SCIENCE↗

Uncertainty-quantified phenomenological optical potentials for single-nucleon scattering

Optical-model potentials (OMPs) continue to play a key role in nuclear reaction calculations. However, the uncertainty of phenomenological OMPs in widespread use—inherent to any parametric model trained on data—has not been fully characterized, and its impact on downstream users of OMPs remains unclear. Here we assign well-calibrated uncertainties for two representative global OMPs, those of Koning-Delaroche and Chapel Hill '89, using Markov-chain Monte Carlo for parameter inference. By comparing the canonical versions of these OMPs against the experimental data originally used to constrain them, we show how a lack of outlier rejection and a systematic underestimation of experimental uncertainties contributes to bias of, and overconfidence in, best-fit parameter values. Our updated, uncertainty-quantified versions of these OMPs address these issues and yield complete covariance information for potential parameters. Scattering predictions generated from our ensembles show improved performance both against the original training corpora of experimental data and against a new “test” corpus comprising many of the experimental single-nucleon scattering data collected over the last twenty years. Finally, we apply our uncertainty-quantified OMPs to two case studies of application-relevant cross sections. We conclude that, for many common applications of OMPs, including OMP uncertainty should become standard practice. Furthermore, to facilitate their immediate use, digital versions of our updated OMPs and related tools for forward uncertainty propagation are included as Supplemental Material.

150 ≤ A ≤ 189↗

Using a modified double deep image prior for crosstalk mitigation in multislice ptychography

Multislice ptychography is a high-resolution microscopy technique used to image multiple separate axial planes using a single illumination direction. However, multislice ptychography reconstructions are often degraded by crosstalk, where some features on one plane erroneously contribute to the reconstructed image of another plane. Here, the use of a modified `double deep image prior' (DDIP) architecture is demonstrated in mitigating crosstalk artifacts in multislice ptychography. Utilizing the tendency of generative neural networks to produce natural images, a modified DDIP method yielded good results on experimental data. For one of the datasets, it is shown that using DDIP could remove the need of using additional experimental data, such as from X-ray fluorescence, to suppress the crosstalk. This method may help X-ray multislice ptychography work for more general experimental scenarios.

36 MATERIALS SCIENCE↗

Coupling scales for modelling heavy metal vaporization from municipal solid waste incineration in a fluid bed by CFD

Highlights: • A CFD two-scale model is formulated to simulate heavy metal vaporization from waste incineration in fluidized beds. • MSW particle is modelled with the macroscopic particle model. • Influence of bed dynamics on HM vaporization is included. • CFD predicted results agree well with experimental data reported in literature. • This approach may be helpful for fluidized bed reactor modelling purposes. - Abstract: Municipal Solid Waste Incineration (MSWI) in fluidized bed is a very interesting technology mainly due to high combustion efficiency, great flexibility for treating several types of waste fuels and reduction in pollutants emitted with the flue gas. However, there is a great concern with respect to the fate of heavy metals (HM) contained in MSW and their environmental impact. In this study, a coupled two-scale CFD model was developed for MSWI in a bubbling fluidized bed. It presents an original scheme that combines a single particle model and a global fluidized bed model in order to represent the HM vaporization during MSW combustion. Two of the most representative HM (Cd and Pb) with bed temperatures ranging between 923 and 1073 K have been considered. This new approach uses ANSYS FLUENT 14.0 as the modelling platform for the simulations along with a complete set of self-developed user-defined functions (UDFs). The simulation results are compared to the experimental data obtained previously by the research group in a lab-scale fluid bed incinerator. The comparison indicates that the proposed CFD model predicts well the evolution of the HM release for the bed temperatures analyzed. It shows that both bed temperature and bed dynamics have influence on the HM vaporization rate. It can be concluded that CFD is a rigorous tool that provides valuable information about HM vaporization and that the original two-scale simulation scheme adopted allows to better represent the actual particle behavior in a fluid bed incinerator.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Hybrid Domain Overlapping Method for Coupling System Thermal Hydraulics and CFD Codes

A hybrid multiscale coupling methodology based on a domain overlapping approach has been developed for coupling System Thermal Hydraulics (STH) and Computational Fluid Dynamics (CFD) codes. The method has been implemented between the modern STH code SAM and the CFD code NekRS, using the coupling tool Cardinal. The coupling aims to extend the STH code's applicability to scenarios where local momentum and energy transfers are important yet difficult for STH codes to capture, such as three-dimensional mixing. Two coupling strategies are implemented and compared: a hybrid domain overlapping method and the conventional domain decomposition method. Here, the strategies are applied to two closed-loop applications, and the present method shows superior stability behavior when compared to the domain decomposition method. Then, the present coupling method is validated against experimental data from a double T-junction experiment. The present STH/CFD coupling shows improved agreement with experimental data when compared to STH standalone simulations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Plant-wide modeling and techno-economic analysis of a direct non-oxidative methane dehydroaromatization process via conventional and microwave-assisted catalysis

Direct non-oxidative methane dehydroaromatization (DHA) process via conventional and microwave (MW)-assisted thermo-catalytic catalysis is studied. Rate models for methane DHA reactions, including the effect of catalyst deactivation, are developed by using the in-house experimental data. Model results for gas concentration profile and catalyst deactivation are in good agreement with the experimental data. This rate model is then used for the development of dynamic multi-scale, multi-physics commercial-scale reactor models. Total number of fixed bed reactors desired for a cyclic steady state process is estimated. Plant-wide models are then developed for conventional and MW-assisted processes for producing products of desired specifications. Techno-economic analysis of the methane DHA process is undertaken. Economics of these methane DHA processes are compared with the typical multi-step natural gas to aromatics production process via methanol synthesis. Sensitivity of internal rate of return (IRR) and net present value (NPV) to various economic and process parameters such as plant scale, desired rate of return, reactor cost, feedstock and utility cost, catalyst variable cost, and MW reactor cost is studied. Here, electric equivalent efficiency of the conventional methane DHA process is found to be 69.2 % and 67.3 % at 750 °C and 800 °C, respectively, while the MW-assisted methane DHA process has the electric equivalent efficiency of 48.9 % at 800 °C. IRRs of the conventional methane DHA process at 750 °C and 800 °C, and MW-assisted process are 15.2 %, 17.5 %, and 18.8 %, respectively for a methane feed flowrate of 19,782 kg/h, while the IRR of the multi-step natural gas to aromatics production process is estimated to be 0 % for the same plant scale. Impact of change in the methane price, electricity price, and catalyst cost is found to be considerable on the process economics, while the cost of the MW reactor is found to have negligible impact.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of underexpanded hydrogen jets through square and rectangular slot nozzles

The development and revision of safety codes and standards for hydrogen infrastructure requires a solid scientific basis, including studies of unignited releases from high pressure systems for various scenarios. Most hydrogen releases are modeled as axisymmetric jets, but real leaks are more likely to be non-axisymmetric jets issuing from high aspect ratio cracks or slots. In the present study, underexpanded hydrogen jets from square and rectangular nozzles with aspect ratios of 1 to 16 were numerically modeled for stagnation pressures up to 20 MPa. The near and far flow fields were modeled separately using two sequential computational domains to accurately and efficiently capture the flow characteristics. The numerical models were first validated with experimental data from a previous experimental study and literature data. The mass fraction and velocity distributions show that the centerline decay rates increase as the nozzle aspect ratio increases, but this increase is dependent on the pressure. This means that the canonical decay law of round turbulent jets and plumes no longer applies to the slot nozzle jets for high pressures. The radial profiles collapse onto a Gaussian curve in the minor axis plane, but neither collapse, nor are they Gaussian in the major axis plane with peaks away from the jet centerline. Different shock patterns were identified along the major and minor axes and the axis switching phenomenon seen in the literature was also reproduced. The axis switching resulted in significantly wider flattened concentration distributions compared with the axisymmetric jet which may require consideration during safety analyses for non-circular nozzles. A scaling factor taking both the nozzle shape and pressure effects into account SAND2018-12056J This paper describes objective technical results and analysis. Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.S. Department of Energy or the United States Government. was then devleoped to better scale the centerline decay rates for jets from both the square and rectangular nozzles. The present study demonstrates that the nozzle shape effects on the jet spreading should not be overlooked and proper scaling factors are required to collapse the data and calculate decay rates.

08 HYDROGEN↗

A kinetic study of the fast micro-pyrolysis of hybrid poplar

Here, hybrid poplar from the clone DN34 was studied to determine the rate of production of bio-oil species with respect to time during the fast pyrolysis process. 300–660 ug samples were pyrolyzed using a micropyrolzer at 500 °C at very high heating rates and very short vapor residence times. Individual poplar samples were run in triplicate at discrete time points ranging from 1 to 20 s in the micropyrolzer. Several bio-oil compounds from each individual sample were analyzed using GC/MS. Select bio-oil compounds, derived from the hemicellulose, cellulose, and lignin fractions of the wood, were used to determine their rates of production from thermal degradation of the biomass. These rates were quantified using standards to determine the weight percent relative to the original raw biomass with respect to time. Pyrolysis kinetic reaction models were fit to this experimental data in order to determine suitability of each model. A first order exponential decay model for degradation of the solid biomass was fit against the data along with a six-step consecutive degradation model previously developed by our group. The experimental data suggests that compounds derived from the hemicellulose are produced at faster rates than that of the lignin or cellulose fractions of the wood, consistent with prior data from thermogravimetric analysis (TGA). When applying the first order exponential decay model, the reaction rates calculated did prove that holocellulose compounds reaction rates were approximately twice that of the lignin compounds reaction rate but did not provide the best fit. The six-step degradation model provided a better fit to all of the biooil compounds and char data, and the stoichiometric parameters derived from the model fit showed that the first three reactions involved mostly the hemicellulose derived compounds while reaction steps 4–6 released cellulose- and lignin-derived compounds.

09 BIOMASS FUELS↗

Polarized Parton Distribution, Orbital Angular Momentum, and the Violation of a{sub 8}

We use the so-called valon model, to describe the spin structure of the nucleon. We show that about 40% of the nucleon spin is carried by the polarized valence quarks. The remaining part comes from the gluon polarization and the orbital angular momentum. It is shown that the sea quark contributions to the spin of any hadron is simply marginal and consistent with zero. We also found that the value of a{sub 8} is substantially smaller than the value inferred from hyperon--{beta} decay, suggesting that full SU(3) symmetric assumption needs to be reconsidered. New and emerging experimental data tend to support this finding. Finally, we show that within the model presented here the experimental data on the polarized structure functions g{sub 1}{sup p,n,d} are reproduced.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A RELAP5-3D Model of the Lobo Lead Loop

The goal of our research is to build upon the capability of RELAP5-3D to model molten lead systems. Molten lead has several potential uses in future advanced reactors like the lead fast reactor or fusion reactors that utilize dual-coolant lead lithium blankets. This potential for use in future generations of reactors highlights the necessity to develop molten lead models to ensure that they can accurately predict the thermohydraulic behavior. We have developed a RELAP5-3D model of the Lobo Lead Loop facility, located at the University of New Mexico, to verify the accuracy of RELAP5-3D via comparison to existing computational fluid dynamics results and analytical calculations. It was found that RELAP5-3D accurately calculated radiative heat transfer (within < 1%) when compared to theoretical calculations. In addition, pressure drop calculations done in RELAP5-3D demonstrated reasonable agreement within 20 kPa, mostly within ~7-15%, when compared to the computational fluid dynamics model of the facility developed by the University of New Mexico, and captured the dependence of pressure drop on flow velocity accurately. Finally, a hypothetical loss of flow transient was imposed on the RELAP5-3D model to determine the feasibility of performing a similar experiment with the Lobo Lead Loop. It was found that such an experiment could be possible as the RELAP5-3D model indicated that the temperatures of the fluid would not exceed limiting temperatures of the structure (1658 K) nor the maximum temperature of the electromagnetic pump inlet (823 K). Although there is not experimental data to begin validation, the model will be readily available for future validation studies when the experimental data is generated, especially as the model continues to evolve over time. Furthermore, the results so far demonstrate a promising first step in the verification/validation of the RELAP5-3D model of the Lobo Lead Loop.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Proton elastic scattering on calcium isotopes from chiral nuclear optical potentials

We formulate microscopic optical potentials for nucleon-nucleus scattering from chiral two- and three-nucleon forces. The real and imaginary central terms of the optical potentials are obtained from the nucleon self-energy in infinite nuclear matter at a given density and isospin asymmetry, calculated self-consistently to second order in many-body perturbation theory. Furthermore, the real spin-orbit term is extracted from the same chiral potential using an improved density matrix expansion. The density-dependent optical potential is then folded with the nuclear density distributions of 40,42,44,48 Ca from which we study proton-nucleus elastic scattering and total reaction cross sections using the reaction code talys. We compare the results of the microscopic calculations to those of phenomenological models and experimental data up to projectile energies of E = 180 MeV. While overall satisfactory agreement with the available experimental data is obtained, we find that the elastic scattering and total reaction cross sections can be significantly improved with a weaker imaginary optical potential, particularly for larger projectile energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

WEC-SIM Phase 1 Validation Testing -- Numerical Modeling of Experiments: Preprint

The Wave Energy Converter Simulator (WEC-Sim) is an open-source code jointly developed by Sandia National Laboratories and the National Renewable Energy Laboratory. It is used to model wave energy converters subjected to operational and extreme waves. In order for the WEC-Sim code to be beneficial to the wave energy community, code verification and physical model validation is necessary. This paper describes numerical modeling of the wave tank testing for the 1:33-scale experimental testing of the floating oscillating surge wave energy converter. The comparison between WEC-Sim and the Phase 1 experimental data set serves as code validation. This paper is a follow-up to the WEC-Sim paper on experimental testing, and describes the WEC-Sim numerical simulations for the floating oscillating surge wave energy converter.

16 TIDAL AND WAVE POWER↗

The MIDAS touch for Accurately Predicting the Stress-Strain Behavior of Tantalum

Testing the behavior of metals in extreme environments is not always feasible, so material scientists use models to try and predict the behavior. To achieve accurate results it is necessary to use the appropriate model and material-specific parameters. This research evaluated the performance of six material models available in the MIDAS database [1] to determine at which temperatures and strain-rates they perform best, and to determine to which experimental data their parameters were optimized. Additionally, parameters were optimized for the Johnson-Cook model using experimental data from Lassila et al [2].

36 MATERIALS SCIENCE↗

Prediction of windage power loss in alternators

Simplified equations and constants, based on laminar and turbulent flow theory between parallel plates, estimate windage loss in rotating electrical machinery. Comparison of calculated results and experimental data for smooth cylindrical rotor and slotted alternator yields 7 percent maximum variation between calculated and experimental data.

Vrancik, J. E.↗

Investigation of the flow field surrounding circular-arc boattail nozzles at subsonic speeds

The effects of jet exhaust on the subsonic flow field surrounding boattail nozzles with attached and separated boundary layers were investigated. Measurements of local Mach numbers and flow angles were made at free-stream Mach numbers of 0.60 and 0.80 at an angle of attack of 0 deg. Jet exhaust flow was simulated with a solid cylindrical sting and with high pressure air at jet-nozzle total pressure ratios of 2.9 and 5.0. Results show strong effects of the jet-wave structure on the external flow field. The predicted local Mach numbers and flow angles for attached-flow nozzles with solid jet simulators obtained by using subsonic inviscid/viscous-flow theory are in good agreement with experimental data. Prediction of nozzle surface pressure distributions which include jet-entrainment effects also agree with experimental data for attached-flow nozzles with high pressure air jets.

Abeyounis, W. K.↗

Experimental studies of scale effects on oscillating airfoils at transonic speeds

Experimental data are presented on the effect of Reynolds number on unsteady pressures induced by the pitching motion of an oscillating airfoil. Scale effects are discussed with reference to a conventional airfoil (NACA 64A010) and a supercritical airfoil (NLR 7301) at mean-flow conditions that support both weak and strong shock waves. During the experiment the Reynolds number was varied from 3,000,000 to 12,000,000 at a Mach number and incidence necessary to induce the required flow. Both fundamental frequency and complete time history data are presented over the range of reduced frequencies that is important in aeroelastic applications. The experimental data show that viscous effects are important in the case of the supercritical airfoil at all flow conditions and in the case of the conventional airfoil under strong shock-wave conditions. Some frequency-dependent viscous effects were also observed.

Davis, S. S.↗

Transonic three-dimension viscous-inviscid interaction for wing-body configuration analysis

A three-dimensional small disturbance transonic analysis code has been coupled with a three-dimensional integral boundary layer code. A scheme was developed to interact the two codes through the use of a controlling module. The resulting hybrid code does not increase the costs or computer core requirements over that of the previous capabilities of the analysis code, which used a two-dimensional boundary layer analysis to model viscous effects. Several configurations have been analyzed and results compared against both experimental data and computational results using the two-dimensional viscous model. Results indicate good agreement with experimental data when using the three-dimensional interaction scheme, with the most marked improvement in the correlations observed for wing pressure coefficient predictions in the lower surface cusp region for supercritical wings.

Waggoner, E. G.↗