Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Effect of Weld Consumable Conditioning on the Diffusible Hydrogen and Subsequent Residual Stress and Flexural Strength of Multipass Welded P91 Steels

P91 steel weld joint was prepared using the shielded metal arc welding process and four different conditions of weld consumable that provide the different levels of diffusible hydrogen in deposited metal. In the present research, the effects of diffusible hydrogen content on the flexural strength, lower critical stress, and tensile strength of P91 steel welds were also determined with respect to different electrode conditions. To investigate the effect of diffusible hydrogen on multipass welding, top and root side flexural tests were performed. The residual stresses (axial stress and transverse stress) were also measured using the blind hole drilling method for different conditions of welding consumable. The peak value of residual stresses was measured at the center of the weld fusion zone. The maximum value of transverse stress was measured to be 355 MPa for case II (6.21 mL/100 g of diffusible hydrogen), while the maximum axial stress was about 218 MPa for case IV (12.43 mL/100 g of diffusible hydrogen). A three-dimensional finite element simulation was also performed to predict the residual stress distribution and thermal profile along the welded joint. The experimentally determined residual stresses correlated well with the numerically estimated residual stresses. The diffusible hydrogen content was not observed to have any significant effect on the residual stresses. The corrected residual stress values were also predicted by considering the plasticity-induced error. However, the flexural performance of the welded joint was affected by the diffusible hydrogen content. The top and root flexural strength was measured to be optimum for the low level of diffusible hydrogen content, and the values decreased with an increase in diffusible hydrogen content.

36 MATERIALS SCIENCE↗

Influence of Forced Flow on the Dendritic Growth of Fe-C Alloy: 3D vs 2D Simulation

A 3D parallel cellular automaton-finite volume method (CA-FVM) model was used to simulate the equiaxed dendritic growth of an Fe-0.82 wt pct C alloy with xy-in-out and xyz-in-out type forced flows and the columnar dendritic growth with y-in-out type forced flow. In addition, the similarities and differences between the results of the 3D and 2D models are discussed and summarized in detail. The capabilities of the 3D and 2D CA-FVM models to predict the dendritic growth of the alloy with forced flow are validated through comparison with the boundary layer correction and Oseen–Ivanstov models, respectively. Because the forced flow can pass around perpendicular arms of the dendrites, the secondary arms at the sides upstream from the perpendicular arms are more developed than those on the upstream side of the upstream arms, especially at higher inlet velocities. In addition, compared to the xy-in-out case, the growth of the downstream arms is less inhibited and the secondary arms are more developed in the xyz-in-out case because of the greater lateral flow around their tips. Compared to the 3D case, the 2D equiaxed dendrites are more asymmetrical and lack secondary arms because of the thicker solute envelope. In the 3D case, the columnar dendrites on the upstream side (left one) are promoted, while the middle and downstream dendrites are inhibited in sequence. However, the sequential inhibition starts on the upstream side in the 2D case. This is mainly because the melt can pass around the upstream branch in 3D space. However, it can only climb over the upstream tip in 2D space. Additionally, the secondary arms show upstream development, which is more significant with increasing inlet velocity. The level of development of the secondary arms is also affected by the decay of the forced flow in the flow direction.

36 MATERIALS SCIENCE↗

Experimental Validation of Numerical Simulations of a New-Generation NiTi Endodontic File Under Bending

The superelasticity of NiTi shape memory alloy has been used in endodontics since the 1990s. To study the mechanical behavior of endodontic instruments, a traditional approach consists in experimental investigations. However, finite element analysis constitutes another way to assess their mechanical behavior and to facilitate their design. The main aim of this study is to compare experimental and numerical bending results on different structures (NiTi wire, spreader, and instruments) to estimate the reliability of the finite element simulations. These investigations were carried out as follows. Firstly, experimental material parameters identification was performed using NiTi wires. These parameters were implemented in an appropriate NiTi model. Bending was numerically applied to the meshed structures generated by the finite element method. Experimental tests were performed on real structures under bending, with exactly the same loading, in order to compare experimental and numerical results. These results were in good agreement for each of the considered structures. This enabled the validation of the simulation results and the use of simulations to design new endodontic instruments.

36 MATERIALS SCIENCE↗

Dynamic calibration of differential equations using machine learning, with application to turbulence models

We present a methodology for calibration of parametric ordinary and partial differential equation models, using off-the-shelf software for back-propagation in Neural Networks (NN). As a prototypical example, we consider calibration of a Reynolds-averaged Navier-Stokes (RANS) turbulence closure model, against ground truth data from direct numerical simulations (DNS) of two different turbulent flows. Numerical time integration is represented as a custom NN, where only the RANS model parameters are trainable. A loss function is defined to quantify the mismatch between the NN prediction and the ground truth over a predefined, finite time integration window. This loss function is then minimized using a gradient descent method utilizing the back-propagation algorithm. Furthermore, this dynamic approach to training is to be contrasted with a static approach, wherein a least square regression estimate for parameters is obtained in the limit of an infinitesimal time integration window. In a first test of static and dynamic approaches against ground truth data generated by the model, the former proves to be significantly faster and more accurate than the latter at recovering the parameters. When both calibration approaches are tested against DNS data, for which it is known that the model cannot achieve a perfect fit, the static approach yields a good prediction only for short times, while the dynamic approach results in physical and stable predictions over the entire integration window. After optimization of the dynamic approach for time step, spatial resolution, stability, and physics-based constraints, we obtain a 50% improvement of outcomes over those obtained from the existing, manually calibrated set of parameters, demonstrating the merits of this systematic and automated procedure.

97 MATHEMATICS AND COMPUTING↗

An $\bar{F}$ Meshfree Treatment for Nearly Incompressible Materials

The computational modeling of nearly incompressible materials is a difficult task for many numerical methods, and even after several decades of investigation, it is still an active research area. This report seeks to address the treatment of incompressible materials in meshfree methods using a synergistic combination of two treatments. The first treatment is an $\bar{F}$ method, where the decomposed dilatational and deviatoric parts are calculated over different smoothing domains. The second treatment “activates” additional nodes throughout the domain to increase the flexibility of the model. We implement this synergistic combination in the context of the reproducing kernel particle method (RKPM) and present results for the Cook’s membrane benchmark problem. The results are compared with those using the composite tet10 finite element with a volume-averaged J formulation. We show that the combined treatment is an effective way to deal with nearly incompressible materials in a meshfree framework and compares well with other highly-effective treatments.

97 MATHEMATICS AND COMPUTING↗

Multi-fidelity microstructure-induced uncertainty quantification by advanced Monte Carlo methods

Quantifying uncertainty associated with the microstructure variation of a material can be a computationally daunting task, especially when dealing with advanced constitutive models and fine mesh resolutions in the crystal plasticity finite element method (CPFEM). Numerous studies have been conducted regarding the sensitivity of material properties and performance to the mesh resolution and choice of constitutive model. However, a unified approach that accounts for various fidelity parameters, such as mesh resolutions, integration time-steps and constitutive models simultaneously is currently lacking. Further, this paper proposes a novel uncertainty quantification (UQ) approach for computing the properties and performance of homogenized materials using CPFEM, that exploits a hierarchy of approximations with different levels of fidelity. In particular, we illustrate how multi-level sampling methods, such as multi-level Monte Carlo (MLMC) and multi-index Monte Carlo (MIMC), can be applied to assess the impact of variations in the microstructure of polycrystalline materials on the predictions of homogenized materials properties. We show that by adaptively exploiting the fidelity hierarchy, we can significantly reduce the number of microstructures required to reach a certain prescribed accuracy. Finally, we show how our approach can be extended to a multi-fidelity framework, where we allow the underlying constitutive model to be chosen from either a phenomenological plasticity model or a dislocation-density-based model.

36 MATERIALS SCIENCE↗

Towards a systematic assessment of errors in diffusion Monte Carlo calculations of semiconductors: Case study of zinc selenide and zinc oxide

The fixed node diffusion Monte Carlo (DMC) method has attracted interest in recent years as a way to calculate properties of solid materials with high accuracy. However, the framework for the calculation of properties such as total energies, atomization energies, and excited state energies is not yet fully established. Several outstanding questions remain as to the effect of pseudopotentials, the magnitude of the fixed node error, and the size of supercell finite size effects. Here, we consider in detail the semiconductors ZnSe and ZnO and carry out systematic studies to assess the magnitude of the energy differences arising from controlled and uncontrolled approximations in DMC. The former include time step errors and supercell finite size effects for ground and optically excited states, and the latter include pseudopotentials, the pseudopotential localization approximation, and the fixed node approximation. We find that for these compounds, the errors can be controlled to good precision using modern computational resources and that quantum Monte Carlo calculations using Dirac-Fock pseudopotentials can offer good estimates of both cohesive energy and the gap of these systems. We do however observe differences in calculated optical gaps that arise when different pseudopotentials are used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Individual-specific multi-scale finite element simulation of cortical bone of human proximal femur

We present an innovative method to perform multi-scale finite element analyses of the cortical component of the femur using the individual’s (1) computed tomography scan; and (2) a bone specimen obtained in conjunction with orthopedic surgery. The method enables study of micro-structural characteristics regulating strains and stresses under physiological loading conditions. The analysis of the micro-structural scenarios that cause variation of strain and stress is the first step in understanding the elevated strains and stresses in bone tissue, which are indicative of higher likelihood of micro-crack formation in bone, implicated in consequent remodeling or macroscopic bone fracture. Evidence that micro-structure varies with clinical history and contributes in significant, but poorly understood, ways to bone function, motivates the method’s development, as does need for software tools to investigate relationships between macroscopic loading and micro-structure. Three applications – varying region of interest, bone mineral density, and orientation of collagen type I, illustrate the method. We show, in comparison between physiological loading and simple compression of a patient’s femur, that strains computed at the multi-scale model’s micro-level: (i) differ; and (ii) depend on local collagen-apatite orientation and degree of calcification. Our findings confirm the strain concentration role of osteocyte lacunae, important for mechano-transduction. We hypothesize occurrence of micro-crack formation, leading either to remodeling or macroscopic fracture, when the computed strains exceed the elastic range observed in micro-structural testing.

60 APPLIED LIFE SCIENCES↗

SU-F-T-478: Effect of Deconvolution in Analysis of Mega Voltage Photon Beam Profiles

Purpose: To study and compare the penumbra of 6 MV and 15 MV photon beam profiles after deconvoluting different volume ionization chambers. Methods: 0.125cc Semi-Flex chamber, Markus Chamber and PTW Farmer chamber were used to measure the in-plane and cross-plane profiles at 5 cm depth for 6 MV and 15 MV photons. The profiles were measured for various field sizes starting from 2×2 cm till 30×30 cm. PTW TBA scan software was used for the measurements and the “deconvolution” functionality in the software was used to remove the volume averaging effect due to finite volume of the chamber along lateral and longitudinal directions for all the ionization chambers. The predicted true profile was compared and the change in penumbra before and after deconvolution was studied. Results: After deconvoluting the penumbra decreased by 1 mm for field sizes ranging from 2 × 2 cm till 20 x20 cm. This is observed for along both lateral and longitudinal directions. However for field sizes from 20 × 20 till 30 ×30 cm the difference in penumbra was around 1.2 till 1.8 mm. This was observed for both 6 MV and 15 MV photon beams. The penumbra was always lesser in the deconvoluted profiles for all the ionization chambers involved in the study. The variation in difference in penumbral values were in the order of 0.1 till 0.3 mm between the deconvoluted profile along lateral and longitudinal directions for all the chambers under study. Deconvolution of the profiles along longitudinal direction for Farmer chamber was not good and is not comparable with other deconvoluted profiles. Conclusion: The results of the deconvoluted profiles for 0.125cc and Markus chamber was comparable and the deconvolution functionality can be used to overcome the volume averaging effect.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Bandgaps and directional properties of two-dimensional square beam-like zigzag lattices

In this paper we propose four kinds of two-dimensional square beam-like zigzag lattice structures and study their bandgaps and directional propagation of elastic waves. The band structures are calculated by using the finite element method. Both the in-plane and out-of-plane waves are investigated simultaneously via the three-dimensional Euler beam elements. The mechanism of the bandgap generation is analyzed by studying the vibration modes at the bandgap edges. The effects of the geometry parameters of the xy- and z-zigzag lattices on the bandgaps are investigated and discussed. Multiple complete bandgaps are found owing to the separation of the degeneracy by introducing bending arms. The bandgaps are sensitive to the geometry parameters of the periodic systems. The deformed displacement fields of the harmonic responses of a finite lattice structure subjected to harmonic loads at different positions are illustrated to show the directional wave propagation. An extension of the proposed concept to the hexagonal lattices is also presented. The research work in this paper is relevant to the practical design of cellular structures with enhanced vibro-acoustics performance.

36 MATERIALS SCIENCE↗

ELSI — An open infrastructure for electronic structure solvers

Routine applications of electronic structure theory to molecules and periodic systems need to compute the electron density from given Hamiltonian and, in case of non-orthogonal basis sets, overlap matrices. System sizes can range from few to thousands or, in some examples, millions of atoms. Different discretization schemes (basis sets) and different system geometries (finite non-periodic vs. infinite periodic boundary conditions) yield matrices with different structures. The ELectronic Structure Infrastructure (ELSI) project provides an open-source software interface to facilitate the implementation and optimal use of high-performance solver libraries covering cubic scaling eigensolvers, linear scaling density-matrix-based algorithms, and other reduced scaling methods in between. In this paper, we present recent improvements and developments inside ELSI, mainly covering (1) new solvers connected to the interface, (2) matrix layout and communication adapted for parallel calculations of periodic and/or spin-polarized systems, (3) routines for density matrix extrapolation in geometry optimization and molecular dynamics calculations, and (4) general utilities such as parallel matrix I/O and JSON output. The ELSI interface has been integrated into four electronic structure code projects (DFTB+, DGDFT, FHI-aims, SIESTA), allowing us to rigorously benchmark the performance of the solvers on an equal footing. Based on results of a systematic set of large-scale benchmarks performed with Kohn–Sham density-functional theory and density-functional tight-binding theory, we identify factors that strongly affect the efficiency of the solvers, and propose a decision layer that assists with the solver selection process. As a result, we describe a reverse communication interface encoding matrix-free iterative solver strategies that are amenable, e.g., for use with planewave basis sets.

97 MATHEMATICS AND COMPUTING↗

The estimation of Poisson’s ratio by time-averaging and Cornu’s method for isotropic beams

Prior research suggests that direct static (e.g., uniaxial testing) and dynamic (e.g., ultrasonic wave propagation analysis) measurements differ in the estimation of Poisson’s ratio because anisotropies and heterogeneities in the sample material affect the two types of tests differently. Even assuming isotropic and homogeneous material properties, prior research further suggests that discrepancies between static/dynamic test results will exist because the error of the diagnostic techniques for the measurand are inherently different. Finally, thermodynamic effects are not present in static tests but can significantly affect dynamic test results. Given the potential for all these variables to produce discrepancies, it would be helpful to have the measurement of Poisson’s ratio obtainable from the same theory and experimental measurements by either static or dynamic testing methods. Our finite element calculations show that by combining time-averaged scanning digital holography with Cornu’s method, it is theoretically possible to estimate the effective Poisson’s ratio from the anticlastic contours at the antinode of the first out-of-plane bending mode shape. This is true regardless of frequency and therefore applicable for both static and dynamic measurements. Our results show that the estimate of Poisson’s ratio by Cornu’s method using data from simulations of mode shapes approaches the true value of Poisson’s ratio. Additionally, our research suggests that beam geometry and boundary conditions are fundamental factors limiting the convergence of the estimate of Poisson’s ratio to the true value of Poisson’s ratio regardless of performing a static or dynamic test.

42 ENGINEERING↗

Spinodal enhancement of fluctuations in nucleus-nucleus collisions

Subensemble Acceptance Method (SAM) [1, 2] is an essential link between measured event-by-event fluctuations and their grand canonical theoretical predictions such as lattice QCD. The method allows quantifying the global conservation law effects in fluctuations. In its basic formulation, SAM requires a sufficiently large system such as created in central nucleus-nucleus collisions and sufficient space-momentum correlations. Directly in the spinodal region of the First Order Phase Transition (FOPT) different approximations should be used that account for finite size effects. Thus, we present the generalization of SAM applicable in both the pure phases, metastable and unstable regions of the phase diagram [3]. Obtained analytic formulas indicate the enhancement of fluctuations due to crossing the spinodal region of FOPT and are tested using molecular dynamics simulations. A rather good agreement is observed. Using transport model calculations with interaction potential we show that the spinodal enhancement of fluctuations survives till the later stages of collision via the memory effect [4]. However, at low collision energies the space-momentum correlation is not strong enough for this signal to be transferred to second and third order cumulants measured in momentum subspace. This result agrees well with recent HADES data on proton number fluctuations at $\sqrt{S_{NN}}$ = 2.4 GeV which are found to be consistent with the binomial momentum space acceptance [5].

Poberezhnyuk, Roman↗

Nonlinear finite-Larmor-radius effects in reduced fluid models

The polarization magnetization effects associated with the dynamical reduction leading to the nonlinear gyrokinetic Vlasov-Maxwell equations are shown to introduce nonlinear finite-Larmor-radius (FLR) effects into a set of nonlinear reduced-fluid equations previously derived by the Lagrangian variational method [A. J. Brizard, Phys. Plasmas 12, 092302 (2005)]. These intrinsically nonlinear FLR effects, which are associated with the transformation from guiding-center phase-space dynamics to gyrocenter phase-space dynamics, are different from the standard FLR corrections associated with the transformation from particle to guiding-center phase-space dynamics. We also present the linear dispersion relation results from a nonlinear simulation code using these reduced-fluid equations. The simulation results (in both straight dipole geometries) demonstrate that the equations describe the coupled dynamics of Alfven sound waves and that the total simulation energy is conserved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Equations of the dynamics of a liquid crystal under the influence of weak mechanical and thermal perturbations

The paper is devoted to the construction of the simplified mathematical model of thermomechanical behavior of a liquid crystal under the influence of weak mechanical and thermal perturbations. This model is based on the nonlinear equations of a micropolar viscoelastic medium with rotating particles. To describe small strains and finite rotations of molecules, the hypothesis of the dependence of potential energy on the volume change, on the angle of relative rotation and on the entropy is used in the framework of the method of internal thermodynamic parameters. The heat conduction process is described taking into account the anisotropy of a material due to the difference in coefficients of thermal conductivity along the axis of orientation of the particles and in the transverse direction. Separate equation for the tangential stress is obtained from the simplified model, which is useful for the analysis of the recently discussed issues of orientational thermoelasticity and resonant excitation of liquid crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sequential lateral solidification of silicon thin films on low-k dielectrics for low temperature integration

We present the excimer laser crystallization of amorphous silicon on a low dielectric constant (low-k) insulator for very large scale integration monolithic 3D integration and demonstrate that low dielectric constant materials are suitable substrates for 3D integration through laser crystallization of silicon thin films. We crystallized 100 nm amorphous silicon on top of SiO{sub 2} and SiCOH (low-k) dielectrics, at different material thicknesses (1 μm, 0.75 μm, and 0.5 μm). The amorphous silicon crystallization on low-k dielectric requires 35% less laser energy than on an SiO{sub 2} dielectric. This difference is related to the thermal conductivity of the two materials, in agreement with one dimensional simulations of the crystallization process. We analyzed the morphology of the material through defect-enhanced microscopy, Raman spectroscopy, and X-ray diffraction analysis. SEM micrographs show that polycrystalline silicon is characterized by micron-long grains with an average width of 543 nm for the SiO{sub 2} sample and 570 nm for the low-k samples. Comparison of the Raman spectra does not show any major difference in film quality for the two different dielectrics, and polycrystalline silicon peaks are closely placed around 517 cm{sup −1}. From X-ray diffraction analysis, the material crystallized on SiO{sub 2} shows a preferential (111) crystal orientation. In the SiCOH case, the 111 peak strength decreases dramatically and samples do not show preferential crystal orientation. A 1D finite element method simulation of the crystallization process on a back end of line structure shows that copper (Cu) damascene interconnects reach a temperature of 70 °C or lower with a 0.5 μm dielectric layer between the Cu and the molten Si layer, a favorable condition for monolithic 3D integration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extension of the Einstein molecule method for solid free energy calculation to non-periodic and semi-periodic systems

Free energy calculations on solid phases are important for understanding the phase behavior of various systems. For periodic crystalline solids, the Einstein molecule approach can be used to determine the free energy difference between the solid of interest and an ideal crystal for which the free energy can be found analytically. In this work, we show how this method is extensible to systems which are nonperiodic or periodic in some dimensions but not in others. This allows for the calculation of exact absolute free energies of finite-sized crystals having specific shapes and surface geometries. We illustrate this using the fcc Lennard-Jones solid and also illustrate how surface contributions to free energies can easily be extracted from simulations of this solid in semi-infinite slab geometries. We have created a software package which interfaces with the LAMMPS molecular dynamics code to perform these calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterizing skyrmion flow phases with principal component analysis

Principal component analysis (PCA) is a powerful method that can identify patterns in large, complex data sets by constructing low-dimensional order parameters from higher-dimensional feature vectors. There are increasing efforts to use space-and-time-dependent PCA to detect transitions in nonequilibrium systems that are difficult to characterize with equilibrium methods. Here, we demonstrate that feature vectors incorporating the position and velocity information of driven skyrmions moving through random disorder permit PCA to resolve different types of disordered skyrmion motion as a function of driving force and the ratio of the Magnus force to the dissipation. Since the Magnus force creates gyroscopic motion and a finite Hall angle, skyrmions can exhibit a greater range of flow phases than what is observed in overdamped driven systems with quenched disorder. We show that in addition to identifying previously known skyrmion flow phases, PCA detects several additional phases, including different types of channel flow, moving fluids, and partially ordered states. Guided by the PCA analysis, we further characterize the disordered flow phases to elucidate the different microscopic dynamics and show that the changes in the PCA-derived order parameters can be connected to features in bulk transport measures, including the transverse and longitudinal velocity-force curves, differential conductivity, topological defect density, and changes in the skyrmion Hall angle as a function of drive. We discuss how asymmetric feature vectors can be used to improve the resolution of the PCA analysis, and how this technique can be extended to find disordered phases in other nonequilibrium systems with time-dependent dynamics.

36 MATERIALS SCIENCE↗