Search NASA⌕ Search

SEARCH · Search NASA

Results for “grid stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Study of second order upwind differencing in a recirculating flow

The accuracy and stability of the second order upwind differencing scheme was investigated. The solution algorithm employed is based on a coupled solution of the nonlinear finite difference equations by the multigrid technique. Calculations have been made of the driven cavity flow for several Reynolds numbers and finite difference grids. In comparison with the hybrid differencing, the second order upwind differencing is somewhat more accurate but it is not monotonically accurate with mesh refinement. Also, the convergence of the solution algorithm deteriorates with the use of the second order upwind differencing.

Vanka, S. P.↗

Second-order upwind differencing in a recirculating flow

The accuracy and stability of the second order upwind differencing scheme was investigated. The solution algorithm employed is based on a coupled solution of the nonlinear finite difference equations by the multigrid technique. Calculations have been made of the driven cavity flow for several Reynolds numbers and finite difference grids. In comparison with the hybrid differencing, the second order upwind differencing is somewhat more accurate but it is not monotonically accurate with mesh refinement. Also, the convergence of the solution algorithm deteriorates with the use of the second order upwind differencing.

Vanka, S. P.↗

Baseline Computational Fluid Dynamics Methodology for Longitudinal-Mode Liquid-Propellant Rocket Combustion Instability

A computational method for the analysis of longitudinal-mode liquid rocket combustion instability has been developed based on the unsteady, quasi-one-dimensional Euler equations where the combustion process source terms were introduced through the incorporation of a two-zone, linearized representation: (1) A two-parameter collapsed combustion zone at the injector face, and (2) a two-parameter distributed combustion zone based on a Lagrangian treatment of the propellant spray. The unsteady Euler equations in inhomogeneous form retain full hyperbolicity and are integrated implicitly in time using second-order, high-resolution, characteristic-based, flux-differencing spatial discretization with Roe-averaging of the Jacobian matrix. This method was initially validated against an analytical solution for nonreacting, isentropic duct acoustics with specified admittances at the inflow and outflow boundaries. For small amplitude perturbations, numerical predictions for the amplification coefficient and oscillation period were found to compare favorably with predictions from linearized small-disturbance theory as long as the grid exceeded a critical density (100 nodes/wavelength). The numerical methodology was then exercised on a generic combustor configuration using both collapsed and distributed combustion zone models with a short nozzle admittance approximation for the outflow boundary. In these cases, the response parameters were varied to determine stability limits defining resonant coupling onset.

Litchford, R. J.↗

A stabilized stochastic finite element second-order projection method for modeling natural convection in random porous media

We consider natural convection in flow saturated porous media with random porosity. The porosity is treated as a random field and a stochastic finite element method is developed. The stochastic projection method is considered for the solution of the high-dimensional stochastic Navier-Stokes equations since it leads to the uncoupling of the velocity and pressure degrees of freedom. Because of the porosity dependence of the pressure gradient term in the governing flow equations, one cannot use the first-order projection method. A stabilized stochastic finite element second-order projection method is presented based on a pressure gradient projection. A two-dimensional stochastic problem with moderate and large variation in the random porosity field is examined and the results are compared with Monte-Carlo and sparse grid (Smolyak) collocation approaches. Excellent agreement between these results indicates the effectiveness and accuracy of the proposed methodology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ramping and Uncertainty Prediction Tool - Analysis and Visualization of Wind Generation Impact on Electrical Grid

RUT software is designed for use by the Balancing Authorities to predict and display additional requirements caused by the variability and uncertainty in load and generation. The prediction is made for the next operating hours as well as for the next day. The tool predicts possible deficiencies in generation capability and ramping capability. This deficiency of balancing resources can cause serious risks to power system stability and also impact real-time market energy prices. The tool dynamically and adaptively correlates changing system conditions with the additional balancing needs triggered by the interplay between forecasted and actual load and output of variable resources. The assessment is performed using a specially developed probabilistic algorithm incorporating multiple sources of uncertainty including wind, solar and load forecast errors. The tool evaluates required generation for a worst case scenario, with a user-specified confidence level.

Etingov, Pavel↗

Impedance Characterization of Utility-Scale Renewable Energy and Storage Systems

This paper presents the impedance characterization of utility-scale wind turbines and PV/storage inverters using a multimegawatt grid simulator-based grid integration testbed. The paper describes the testbed components including a 7 MVA grid simulator, 5 MW dynamometer, medium-voltage measurement system, and a real-time control system used for automated impedance characterization of wind turbines and inverters. Different aspects of impedance measurement are discussed, including the selection of the magnitude and type of perturbation, measurement of frequency cross-coupling between sequence impedance responses, and the alignment of the reference frame for sequence impedance measurement. The paper also demonstrates high-fidelity validation of EMT simulation models from turbine manufacturers and characterization of grid-forming inverters using impedance measurements.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Theory and motivation behind the Godunov-like staggered grid hydrodynamic approach in FLAG [Slides]

The SGH Godunov-like approach extends some of the benefits of the CCH approach to the SGH framework. It eliminated some sources of errors in the numerical approximations and satisfies a broader set of ancillary equations. The SGH Godunov-like approach obviates the need for explicit viscosity treatments (i.e. mqbarton) and, in general, obviates the need for additional mesh stability models (i.e. TTS, TQS, hourglass, etc.)

97 MATHEMATICS AND COMPUTING↗

Interface and embedded joint methods for modeling dynamic fracture opening by explosive products [Two methods for modeling dynamic fracture opening by explosive products]

Two computational approaches are proposed in the paper to model dynamic fracture opening by explosive products. The first method assumes that the fractures may be modeled using flow elements embedded along the mesh lines. This method models crack opening in a straightforward way by splitting the nodes of the computational grid. It can account for crack branching; however, the crack directions are constrained by existing mesh faces, which may lead to mesh dependence. Also, the stress in flow elements is calculated explicitly separate from the surrounding solid elements that can impose additional limits on the time step stability condition for explicit integration. The second approach uses embedded flow elements to model the cracks. Typical thickness of the cracks is much smaller than the element size. Therefore, gas pressure in the cracks is assumed to be in stress equilibrium with the element stress. To achieve this, the crack thickness and the state of the gas is updated simultaneously with the state of the solid element which contains the crack. Therefore, the time step is controlled by the explicit solver applied for the solid and does not depend on the thickness of the crack. In conclusion, the main disadvantage of the second approach is due to the complexity of modeling multiple intersecting cracks, which go through the same element. We discuss the areas of possible applications of these 2 methods and the ways to improve and enhance them for future practical applications.

58 GEOSCIENCES↗

PRELUDE TO A DOUBLE DEGENERATE MERGER: THE ONSET OF MASS TRANSFER AND ITS IMPACT ON GRAVITATIONAL WAVES AND SURFACE DETONATIONS

We present the results of a systematic numerical study of the onset of mass transfer in double degenerate binary systems and its impact on the subsequent evolution. All investigated systems belong to the regime of direct impact, unstable mass transfer. In all of the investigated cases, even those considered unstable by conventional stability analysis, we find a long-lived mass transfer phase continuing for as many as several dozen orbital periods. This settles a recent debate sparked by a discrepancy between earlier smoothed particle hydrodynamics (SPH) calculations that showed disruptions after a few orbital periods and newer grid-based studies in which mass transfer continued for tens of orbits. The number of orbits a binary survives sensitively depends on the exact initial conditions. We find that the approximate initial conditions that have been used in most previous SPH calculations have a serious impact on all stages of the evolution from the onset of mass transfer up to the final structure of the remnant. We compare 'approximate' initial conditions where spherical stars are placed at an initial separation obtained from an estimate of the Roche lobe size with 'accurate' initial conditions that were constructed by carefully driving the binary system to equilibrium by a relaxation scheme. Simulations that use the approximate initial conditions underestimate the initial separation when mass transfer sets in, which yields a binary that only survives for only a few orbits and thus a rapidly fading gravitational wave signal. Conversely, the accurate initial conditions produce a binary system in which the mass transfer phase is extended by almost two orders of magnitude in time, resulting in a gravitational wave signal with amplitude and frequency that remain essentially constant up until merger. As we show that these binaries can survive at small separation for hundreds of orbital periods, their associated gravitational wave signal should be included when calculating the gravitational wave foreground (although expected to be below Laser Interferometer Space Antenna's sensitivity at these high frequencies). We also show that the inclusion of the entropy increase associated with shock heating of the accreted material reduces the number of orbits a binary survives given the same initial conditions, although the effect is not as pronounced when using the appropriate initial conditions. The use of accurate initial conditions and a correct treatment of shock heating allows for a reliable time evolution of the temperature, density, and angular momentum, which are important when considering thermonuclear events that may occur during the mass transfer phase and/or after merger. Our treatment allows us to accurately identify when surface detonations may occur in the lead-up to the merger, as well as the properties of final merger products.

79 ASTRONOMY AND ASTROPHYSICS↗

Robustness Against Disturbances in Power Systems Under Frequency Constraints

The wide deployment of renewable generation and the gradual decrease in the overall system inertia make modern power grids more vulnerable to transient instabilities and unacceptable frequency fluctuations. Time-domain simulation based assessment of the system robustness against uncertain and stochastic disturbances is extremely time-consuming. In this paper, we develop an alternative approach, which has its roots in the input-output stability analysis for Lur'e systems. Our approach consists of a mathematically rigorous characterization of the external disturbances that the power system is transiently stable and the frequency constraints are not violated. As a result, the derived certificate is efficiently constructed via convex optimization and is shown to be non-conservative for different IEEE test cases.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Short-period atmospheric gravity waves - A study of their statistical properties and source mechanisms

Gravity waves for the one year period beginning 19 October 1976 around Palisades, New York, are investigated to determine their statistical properties and sources. The waves have typical periods of 10 min, pressure amplitudes of 3 Pa and velocities of 30 m/s. In general, the largest, amplitude waves occur during late fall and early winter when the upper tropospheric winds directly overhead are fastest and the static stability of the lower troposphere is greatest. Mean wave amplitudes correlate highly with the product of the mean maximum wind speed and the mean low level stratification directly aloft. A distinct diurnal variation of wave amplitudes with the largest waves occurring in the pre-dawn hours is also observed as a result of the increased static stability then. The majority of waves are generated by shear instability; however, a number of waves are generated by distant sources such as nuclear detonations or large thunderstorms. The waves with distant sources can be distinguished on the basis of their generally much higher coherency across the grid and velocities that depart markedly from the wind velocity at any point in the sounding.

Gedzelman, S. D.↗

Balloon-based interferometric techniques

A balloon-borne triple-etalon Fabry-Perot Interferometer, observing the Doppler shifts of absorption lines caused by molecular oxygen and water vapor in the far red/near infrared spectrum of backscattered sunlight, has been used to evaluate a passive spaceborne remote sensing technique for measuring winds in the troposphere and stratosphere. There have been two successful high altitude balloon flights of the prototype UCL instrument from the National Scientific Balloon Facility at Palestine, TE (May 80, Oct. 83). The results from these flights have demonstrated that an interferometer with adequate resolution, stability and sensitivity can be built. The wind data are of comparable quality to those obtained from operational techniques (balloon and rocket sonde, cloud-top drift analysis, and from the gradient wind analysis of satellite radiance measurements). However, the interferometric data can provide a regular global grid, over a height range from 5 to 50 km in regions of clear air. Between the middle troposphere (5 km) and the upper stratosphere (40 to 50 km), an optimized instrument can make wind measurements over the daylit hemisphere with an accuracy of about 3 to 5 m/sec (2 sigma). It is possible to obtain full height profiles between altitudes of 5 and 50 km, with 4 km height resolution, and a spatial resolution of about 200 km, along the orbit track. Below an altitude of about 10 km, Fraunhofer lines of solar origin are possible targets of the Doppler wind analysis. Above an altitude of 50 km, the weakness of the backscattered solar spectrum (decreasing air density) is coupled with the low absorption crosssection of all atmospheric species in the spectral region up to 800 nm (where imaging photon detectors can be used), causing the along-the-track resolution (or error) to increase beyond values useful for operational purposes. Within the region of optimum performance (5 to 50 km), however, the technique is a valuable potential complement to existing wind measuring systems and can provide a low cost addition to powerful active (LIDAR) wind measuring systems now under development.

Rees, David↗

Aeroacoustic sensitivity analysis and optimal aeroacoustic design of turbomachinery blades

During the first year of the project, we have developed a theoretical analysis - and wrote a computer code based on this analysis - to compute the sensitivity of unsteady aerodynamic loads acting on airfoils in cascades due to small changes in airfoil geometry. The steady and unsteady flow though a cascade of airfoils is computed using the full potential equation. Once the nominal solutions have been computed, one computes the sensitivity. The analysis takes advantage of the fact that LU decomposition is used to compute the nominal steady and unsteady flow fields. If the LU factors are saved, then the computer time required to compute the sensitivity of both the steady and unsteady flows to changes in airfoil geometry is quite small. The results to date are quite encouraging, and may be summarized as follows: (1) The sensitivity procedure has been validated by comparing the results obtained by 'finite difference' techniques, that is, computing the flow using the nominal flow solver for two slightly different airfoils and differencing the results. The 'analytic' solution computed using the method developed under this grant and the finite difference results are found to be in almost perfect agreement. (2) The present sensitivity analysis is computationally much more efficient than finite difference techniques. We found that using a 129 by 33 node computational grid, the present sensitivity analysis can compute the steady flow sensitivity about ten times more efficiently that the finite difference approach. For the unsteady flow problem, the present sensitivity analysis is about two and one-half times as fast as the finite difference approach. We expect that the relative efficiencies will be even larger for the finer grids which will be used to compute high frequency aeroacoustic solutions. Computational results show that the sensitivity analysis is valid for small to moderate sized design perturbations. (3) We found that the sensitivity analysis provided important insight into how airfoils should be modified to improve their aeroelastic stability. Using this insight, we redesigned an aeroelastically unstable cascade to produce a stable cascade.

Hall, Kenneth C.↗

Real-Time Local Volt/VAR Control Under External Disturbances with High PV Penetration

Volt/var control (VVC) of smart PV inverter is becoming one of the most popular solutions to address the voltage challenges associated with high PV penetration. This work focuses on the local droop VVC recommended by the grid integration standards IEEE1547, rule21 and addresses their major challenges i.e. appropriate parameters selection under changing conditions, and the control being vulnerable to instability (or voltage oscillations) and significant steady state error (SSE). This is achieved by proposing a two-layer local real-time adaptive VVC that has two major features i.e. a) it is able to ensure both low SSE and control stability simultaneously without compromising either; and b) it dynamically adapts its parameters to ensure good performance in a wide range of external disturbances such as sudden cloud cover, cloud intermittency, and substation voltage changes. A theoretical analysis and convergence proof of the proposed control is also discussed. The proposed control is implementation friendly as it fits well within the integration standard framework and depends only on the local bus information. Furthermore, the performance is compared with the existing droop VVC methods in several scenarios on a large unbalanced 3-phase feeder with detailed secondary side modeling.

14 SOLAR ENERGY↗

Electrode Blocking Due to Redox Reactions in Aluminum Chloride-Sodium Iodide Molten Salts

Iodide redox reactions in molten NaI/AlCl 3 are shown to generate surface-blocking films, which may limit the useful cycling rates and energy densities of molten sodium batteries below 150 °C. An experimental investigation of electrode interfacial stability at 110 °C reveals the source of the reaction rate limitations. Electrochemical experiments in a 3-electrode configuration confirm an increase of resistance on the electrode surface after oxidation or reduction current is passed. Using chronopotentiometry, chronoamperometry, cyclic voltammetry, and electrochemical impedance spectroscopy, the film formation is shown to depend on the electrode material (W, Mo, Ta, or glassy carbon), as well as the Lewis acidity and molar ratio of I − /I 3 − in the molten salt electrolytes. These factors impact the amount of charge that can be passed at a given current density prior to developing excessive overpotential due to film formation that blocks the electrode surface. The results presented here guide the design and use of iodide-based molten salt electrolytes and electrode materials for grid scale battery applications.

25 ENERGY STORAGE↗

In situ characterization of metastable Pb3O5 and Pb2O3 phases during thermal decomposition of PbO2 to PbO

Nonstoichiometric lead oxides play a key role in the formation and cycling of the positive electrodes in a lead acid battery. These phases have been linked to the underutilization of the positive active material but also play a key role in the battery’s cycle life, providing inter-particle adhesion and the connection to the underlying lead grid. Similar phases have previously been identified by mass loss or color change during thermal annealing of PbO2 to PbO, suggesting that at least two intermediate PbOx phases exist. Using multiple in situ analysis techniques (powder diffraction, x-ray absorption, x-ray photoelectron spectroscopy) and ex situ nuclear magnetic resonance measurements, the structural conversion and changes in the lead oxidation states were identified during this process. Isolation of the PbOx phases enabled confirmation of Pb3O5 and Pb2O3 by diffraction and the first 207Pb NMR measurement of these intermediates.

Kinnibrugh, Tiffany L.↗

Mapping thermal energy storage technologies with advanced nuclear reactors

Advanced nuclear power plants (NPPs) will potentially need to operate in environments where power generation flexibility is more highly valued than the stability or baseload generation capability for conventional demand curves. Thermal energy storage (TES) systems would enable NPPs to respond nimbly to market variability and could also position advanced NPPs to participate differently in restructured markets, thus further enhancing their economic competitiveness. TES systems could also benefit the electric grid by eliminating the need for peaking plants, as well as by improving the economic performance of baseload NPPs. While TES technologies afford a unique opportunity to address many of these challenges, the applicability of these systems is also complicated by the fact that various advanced NPPs are designed differently, each with its own temperature range, size, operating fluids, and operating conditions. Hence, TES systems face significant barriers to investment, as more information on their compatibility and performance metrics is needed to quantify the advantages provided by each, as well as the challenges these technologies might face if coupled with a particular type of advanced NPP. This study explores the possibility of integrating a wide variety of TES technologies with various categories of advanced NPPs, based on their operating characteristics. To help decision makers, users and developers decide which TES technology is best suited to a particular category of advanced NPPs, this research present a Phenomena Identification and Ranking Table (PIRT) analysis of 10 TES systems that could potentially be coupled with advanced NPPs, which themselves are divided into nine categories based on their operating conditions. Then, each advanced NPP category is evaluated for compatibility with the 10 TES systems by assembling and discussing a database of information concerning 10 engineering questions, defined herein in as figures of merit (FOMs), such as: technology readiness level (TRL), temperature compatibility, energy density, size, cycle frequency, ramp time, realignment frequency, geographic needs, environmental impact, and interventions. By assembling a database of information concerning the TES technologies' compatibility with various advanced NPP systems, this study can help developers acquaint themselves with a particular TES technology before choosing to build a new integrated installation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗