Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Tensile properties of co-rolled Zr/U-10Mo fuel at ambient and elevated temperatures

The United States High Performance Research Reactor (USHPRR) initiative is currently interested in replacing high-enriched uranium fuel in research reactors with high-assay low-enriched uranium fuel. Here, this work aimed to assist in that mission by providing tensile and bend test data on bare U-Mo and tensile test data on co-rolled Zr/U-10Mo plates at differing thicknesses (0.285 mm, 0.300 mm, and 0.465 mm) and temperatures (293 K, 473 K, and 623 K). Yield strength and ultimate tensile strength values are reported along with an in-depth comparison of how temperature, rolling direction, thickness, and the presence of the Zr-interlayer affect mechanical properties. Results showed that yield strength and ultimate tensile strength in Zr/U-10Mo foils lower as temperature increases by approximately 300 MPa from 293 to 473 K, and another 100 MPa from 473 to 623 K. Additionally it was found that with increased temperature, there is less differentiation in fuel necking and delamination behavior, as well as a greater perceived elongation to fracture. The elastic modulus of co-rolled mini-plates does not follow the volumetric rule of mixtures in terms of averaged strength and is actually lower than the reported moduli of both Zr and U-10Mo.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Improving Efficiency and Stability of Perovskite Solar Cells Enabled by A Near-Infrared-Absorbing Moisture Barrier

Simultaneously improving device efficiency and stability is the most important issue in perovskite solar cell (PSC) research. Here, we strategically introduce a multi-functional interface layer (MFIL) with integrated roles of: (1) electron transport, (2) moisture barrier, (3) near-infrared photocurrent enhancement, (4) trap passivation, and (5) ion migration suppression to enhance the device performance. The narrow-band-gap non-fullerene acceptor, Y6, was screened out to replace the most commonly used PCBM in the inverted PSCs. A significantly improved power conversion efficiency of 21.0% was achieved, along with a remarkable stability (up to 1,700 h) without encapsulation under various external stimuli (light, heat, and moisture). Furthermore, systematic studies of the molecular orientation or passivation and the charge carrier dynamics at the interface between perovskite and MFIL were presented. These results offer deep insights for designing advanced interlayers and establish the correlations between molecular orientation, interface molecular bonding, trap state density, non-radiation recombination, and the device performance.

14 SOLAR ENERGY↗

Long-term ageing and materials degradation of hybrid mica compressive seals for solid oxide fuel cells

Hybrid phlogopite mica seals with silver interlayers were evaluated in long term isothermal ageing tests in a dual environment consisting of dilute hydrogen vs. air at 800 degrees C. High-temperature leak tests with helium showed very stable leakage of 0.01-0.02 sccm/cm for 28366 hrs under a low applied compressive stress of 82 kPa (12 psi). Post-mortem SEM and EDS analyses of the mica showed minimum degradation in terms of changes in microstructure and chemical composition, although there appeared to be some Ag migration and segregation at interstices between mica flakes. Fluorine was also found to be released from mica. Overall, the low, constant leakage through the hybrid mica/Ag seals clearly demonstrated a very promising candidate for SOFC sealing.

Chou, Y S↗

New insights in the polarization resistance of anode-supported solid oxide fuel cells with La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 cathodes

In this study, the polarization resistance of the La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) solid oxide fuel cell (SOFC) cathode was investigated by I-V sweep and electrochemcial impedance spectroscopy under a series of dc bias voltages and cathode environments (i.e. stagnant air, flowing air, and flowing oxygen) at temperatures from 550 to 750 °C. In flowing oxygen, the polarization resistance of the fuel cell decreased considerably with the applied current density. A linear relationship was observed between the ohmic-free over-potential and the logarithm of the current density of the fuel cell at all the measuring temperatures. In stagnant or flowing air, a new arc related to the molecular oxygen diffusion in the pores of the cathode was identified at high temperatures and high current densities. The magnitude of this arc increased with the applied current density due to the decreased oxygen partial pressure at the interface of the cathode and the electrolyte. It is found that the performance of the fuel cell in air is mainly determined by the oxygen diffusion process. Elimination of this process by flowing oxygen to the cathode improved the cell performance significantly. At 750 °C, for a fuel cell with a laser-deposited Sm 0.2 Ce 0.8 O 1.9 (SDC) interlayer, an extraordinarily high power density of 2.6 W cm -2 at 0.7 V was achieved in flowing oxygen, as a result of reduced ohmic and polarization resistance of the fuel cell, which were 0.06 Ω cm 2 and 0.03 Ω cm 2 , respectively. The results indicate that optimization of the microstructure of the LSCF cathode or adoption of a new cell design which can mitigate the diffusion problem in the cathode might enhance cell performance significantly.

concentration polarization↗

Performance degradation in proton-conducting ceramic fuel cell and electrolyzer stacks

Proton-conducting ceramics are emerging as enabling materials for efficient electrochemical electricity generation, energy storage, and fuels synthesis. In this work, we present longer-term degradation results for protonic-ceramic fuel cells and electrolyzers based on a BaCe 0.4 Zr 0.4 Y 0.1 Yb 0.1 O 3-δ (BCZYYb) electrolyte. The cells are packaged within unit-cell stacks, including metallic interconnects, current collectors, sealing glasses and gaskets. Durability is found to be superior in protonic-ceramic electrolyzers in comparison to fuel cells. Operating conditions have a large impact on degradation rates; better stability is found at fuel-cell operating temperatures above 600 °C, and electrolyzer steam feeds below 20%. Here, we find that both fuel-cell and electrolyzer degradation is greatly reduced via the introduction of a gadolinium-doped ceria interlayer between the electrolyte and the air–steam electrode. Fuel-cell degradation falls to 1.2% khr –1 under methane fuel at 600 °C; electrolyzer degradation is reduced to 1% khr –1 at 550 °C and 50% steam. Further analyses of electrochemical impedance spectroscopy and distribution of relaxation times provide insight to root processes and degradation phenomena in protonic electroceramics.

25 ENERGY STORAGE↗

Improving charge transport in integrated MoO 3 /C electrode materials for water-in-salt energy storage systems by incorporating oxygen vacancies

Improvements in the charge storage properties of α-MoO 3 used as an electrode with a 30m ZnCl 2 water-in-salt electrolyte have been achieved by enhancements in electron and ion transport enabled by an inventive synthesis route. Electron transport was improved through the integration of MoO 3 with dopamine-derived carbon via a chemical preintercalation route, and enhanced ion transport was achieved by incorporating oxygen vacancies in MoO 3 structure through ethanol 2 reduction under hydrothermal conditions. Here, the presence of carbon was confirmed by corresponding D and G bands observed in Raman spectroscopy measurements. The presence of oxygen vacancies was proven through correlated XPS, TGA, Raman spectroscopy and XRD analyses, with the introduction of oxygen vacancies leading to an expanded interlayer region. Four-point probe measurements provided evidence of increased electronic conductivity due to the incorporation of carbon, and cyclic voltammetry-based charge storage mechanism analyses revealed increases in ion transport kinetics due to oxygen vacancy formation. Tuning the oxygen vacancy concentration is critical, as excessive concentrations of these point defects leads to structural instability and poor capacity retention. This work demonstrates the combined potential of carbon and oxygen vacancies in moderate concentrations to enhance the charge storage properties of transition metal oxides. The strategies developed in this study offer a path to the development of promising materials for high-rate, high-capacity, and long-duration electrochemical energy storage technologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A new uranyl niobate sheet in the cesium uranyl niobate Cs{sub 9}[(UO{sub 2}){sub 8}O{sub 4}(NbO{sub 5})(Nb{sub 2}O{sub 8}){sub 2}]

A new cesium uranyl niobate, Cs{sub 9}[(UO{sub 2}){sub 8}O{sub 4}(NbO{sub 5})(Nb{sub 2}O{sub 8}){sub 2}] or Cs{sub 9}U{sub 8}Nb{sub 5}O{sub 41} has been synthesized by high-temperature solid-state reaction, using a mixture of U{sub 3}O{sub 8}, Cs{sub 2}CO{sub 3} and Nb{sub 2}O{sub 5}. Single crystals were obtained by incongruent melting of a starting mixture with metallic ratio=Cs/U/Nb=1/1/1. The crystal structure of the title compound was determined from single crystal X-ray diffraction data, and solved in the monoclinic system with the following crystallographic data: a=16.729(2) A, b=14.933(2) A, c=20.155(2) A{beta}=110.59(1){sup o}, P2{sub 1}/c space group and Z=4. The crystal structure was refined to agreement factors R{sub 1}=0.049 and wR{sub 2}=0.089, calculated for 4660 unique observed reflections with I{>=}2{sigma}(I), collected on a BRUKER AXS diffractometer with MoK{alpha} radiation and a CCD detector. In this structure the UO{sub 7} uranyl pentagonal bipyramids are connected by sharing edges and corners to form a uranyl layer {sub {infinity}}{sup 2}[U{sub 8}O{sub 36}] corresponding to a new anion-sheet topology, and creating triangular, rectangular and square vacant sites. The two last sites are occupied by Nb{sub 2}O{sub 8} entities and NbO{sub 5} square pyramids, respectively, to form infinite uranyl niobate sheets {sub {infinity}}{sup 2}[(UO{sub 2}){sub 8}O{sub 4}(NbO{sub 5})(Nb{sub 2}O{sub 8}){sub 2}]{sup 9-} stacking along the [010] direction. The Nb{sub 2}O{sub 8} entities result from two edge-shared NbO{sub 5} square pyramids. The Cs{sup +} cations are localized between layers and ensured the cohesion of the structure. The cesium cation mobility between the uranyl niobate sheets was studied by electrical measurements. The conductivity obeys the Arrhenius law in all the studied temperature domains. The observed low conductivity values with high activation energy may be explained by the strong connection of the Cs{sup +} cations to the infinite uranyl niobate layers and by the high density of these cations in the interlayer space without vacant site. Infrared spectroscopy investigated at room temperature in the frequency range 400-4000 cm{sup -1}, showed some characteristic bands of uranyl ion and niobium polyhedra. - Graphical abstract: View of the {sub {infinity}}{sup 2}[U{sub 8}O{sub 36}] uranyl infinite layer formed by association of [U{sub 6}O{sub 30}] and [U{sub 2}O{sub 12}] uranyl blocks in Cs{sub 9}[(UO{sub 2}){sub 8}O{sub 4}(NbO{sub 5})(Nb{sub 2}O{sub 8}){sub 2}].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis, crystal structure, thermal behavior and spectroscopic and magnetic properties of two new organically templated fluoro-vanadyl-hydrogenarsenates: (R){sub 0.5}[(VO)(HAsO{sub 4})F] (R: Ethylenediammonium and piperazinium)

Two new fluoro-vanadyl-hydrogenarsenate compounds templated by ethylenediamine and piperazine with formula, (C{sub 2}N{sub 2}H{sub 10}){sub 0.5}[(VO)(HAsO{sub 4})F] (1) and (C{sub 4}N{sub 2}H{sub 12}){sub 0.5}[(VO)(HAsO{sub 4})F] (2), respectively, have been synthesized by using mild hydrothermal conditions under autogenous pressure. The crystal structures have been solved from single-crystal X-ray diffraction data. The phases crystallize in the P2{sub 1}/c monoclinic space group with the unit-cell parameters a=7.8634(4) A, b=7.7658(4) A, c=10.4195(6) A, {beta}=101.524(5){sup o} for compound (1) and a=6.301(1) A, b=10.244(1) A, c=10.248(1) A and {beta}=95.225(1){sup o} for compound (2). These phases exhibit a layered inorganic framework. In both cases, the structure is built from secondary building units (SBU) which are formed by [V{sub 2}O{sub 8}F{sub 2}] edge-shared dimeric vanadyl octahedra, connected by the vertices to two hydrogenarsenate tetrahedra. The repetition of this SBU unit originates sheets along the [1 0 0] direction. The ethylenediammonium and piperazinium cations are located inside the interlayer space. The limit of thermal stability for compounds (1) and (2) is, approximately, 250 and 230 deg. C, respectively. Near this temperature, both phases loose their organic cations and the fluoride anions. The diffuse reflectance spectra confirm the presence of vanadyl ions, in which the vanadium(IV) cations have a d{sup 1} electronic configuration in a slightly distorted octahedral environment. ESR spectra of both phases are isotropic with mean g-values of 1.93 and 1.96 for ethylendiamine and piperazine phases, respectively. Magnetic measurements for (1) and (2) indicate the existence of antiferromagnetic exchange couplings. - Graphical abstract: Polyhedral view of the layered crystal structure of (C{sub 2}H{sub 10}N{sub 2}){sub 0.5} [(VO)(HAsO{sub 4})F].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adaptable coordination of U(IV) in the 2D-(4,4) uranium oxalate network: From 8 to 10 coordinations in the uranium (IV) oxalate hydrates

Crystals of uranium (IV) oxalate hydrates, U(C{sub 2}O{sub 4}){sub 2}.6H{sub 2}O (1) and U(C{sub 2}O{sub 4}){sub 2}.2H{sub 2}O (2), were obtained by hydrothermal methods using two different U(IV) precursors, U{sub 3}O{sub 8} oxide and nitric U(IV) solution in presence of hydrazine to avoid oxidation of U(IV) into uranyl ion. Growth of crystals of solvated monohydrated uranium (IV) oxalate, U(C{sub 2}O{sub 4}){sub 2}.H{sub 2}O.(dma) (3), dma=dimethylamine, was achieved by slow diffusion of U(IV) into a gel containing oxalate ions. The three structures are built on a bi-dimensional complex polymer of U(IV) atoms connected through bis-bidentate oxalate ions forming [U(C{sub 2}O{sub 4})]{sub 4} pseudo-squares. The flexibility of this supramolecular arrangement allows modifications of the coordination number of the U(IV) atom which, starting from 8 in 1 increases to 9 in 3 and, finally increases, to 10 in 2. The coordination polyhedron changes from a distorted cube, formed by eight oxygen atoms of four oxalate ions, in 1, to a mono-capped square anti-prism in 3 and, finally, to a di-capped square anti-prism in 2, resulting from rotation of the oxalate ions and addition of one and two water oxygen atoms in the coordination of U(IV). In 1, the space between the {sub {infinity}}{sup 2}[U(C{sub 2}O{sub 4}){sub 2}] planar layers is occupied by non-coordinated water molecules; in 2, the space between the staggered {sub {infinity}}{sup 2}[U(C{sub 2}O{sub 4}){sub 2}.2H{sub 2}O] layers is empty, finally in 3, the solvate molecules occupy the interlayer space between corrugated {sub {infinity}}{sup 2}[U(C{sub 2}O{sub 4}){sub 2}.H{sub 2}O] sheets. The thermal decomposition of U(C{sub 2}O{sub 4}){sub 2}.6H{sub 2}O under air and argon atmospheres gives U{sub 3}O{sub 8} and UO{sub 2}, respectively. - Graphical abstract: The adaptable environment of U(IV) in U(IV) oxalates: from eight cubic coordination in U(C{sub 2}O{sub 4}){sub 2}.6H{sub 2}O (a) completed by water oxygens to nine in [U(C{sub 2}O{sub 4}){sub 2}.H{sub 2}O](C{sub 2}NH{sub 5}) (b) and ten coordination in U(C{sub 2}O{sub 4}){sub 2}.2H{sub 2}O (c)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimum conditions for intercalation of lacunary tungstophosphate(V) anions into layered Ni(II)-Zn(II) hydroxyacetate

Acetate containing nickel-zinc hydroxysalts (LHS-Ni-Zn) have been synthesized by coprecipitation and hydrothermal treatment. The acetate anions were exchanged with PW{sub 12}O{sub 40}{sup 3-} anions, and optimum conditions to attain the maximum level of W in the compound have been identified. The W intercalated compound was characterized by powder X-ray diffraction, FT-IR spectroscopy, thermogravimetric and differential thermal analyses, scanning electron microscopy and transmission electron microscopy. The exchange of LHS-Ni-Zn with PW{sub 12}O{sub 40}{sup 3-} at pH=3 for 72 h leads to a solid with a basal spacing of 9.62 A and a W content (weight) of 37%. The hydrothermal treatment at 90 deg. C for 24 h increases this value to 48% with a W/Zn molar ratio of 1.38, which corresponds to a layered compound with lacunary tungstophosphate anions in the interlayer space. The intercalated solid is stable up to 250 deg. C, the layer structure collapses on dehydroxylation and amorphous compounds were identified at 500 deg. C. Two crystalline phases, NiO (rock salt) and a solid solution (Zn{sub 1-x}Ni{sub x})WO{sub 4}, were identified by powder X-ray diffraction at high temperature (ca. 1000 deg. C). - Graphical abstract: Optimum conditions for intercalation of Keggin-type anions in Ni, Zn hydroxysalts have been identified. Lacunary species are formed via partial depolymerization of the starting anion. The thermal decomposition of the intercalated phases has been also studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption of arsenic(III) into modified lamellar Na-magadiite in aqueous medium-Thermodynamic of adsorption process

Synthetic Na-magadiite sample was used for organofunctionalization process with N-propyldiethylenetrimethoxysilane and bis[3-(triethoxysilyl)propyl]tetrasulfide, after expanding the interlayer distance with polar organic solvents such as dimethylsulfoxide (DMSO). The resulted materials were submitted to process of adsorption with arsenic solution at pH 2.0 and 298{+-}1 K. The adsorption isotherms were adjusted using a modified Langmuir equation with regression nonlinear; the net thermal effects obtained from calorimetric titration measurements were adjusted to a modified Langmuir equation. The adsorption process was exothermic ({delta}{sub int}H=-4.15-5.98 kJ mol{sup -1}) accompanied by increase in entropy ({delta}{sub int}S=41.32-62.20 J k{sup -1} mol{sup -1}) and Gibbs energy ({delta}{sub int}G=-22.44-24.56 kJ mol{sup -1}). The favorable values corroborate with the arsenic (III)/basic reactive centers interaction at the solid-liquid interface in the spontaneous process. - Grapical Abstract: The results suggest that the adsorption capacities increased with an increase of reactive basic centers in the pendant organic chains of the intercalated agent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvothermal crystal growth of CuSbQ{sub 2} (Q=S, Se) and the correlation between macroscopic morphology and microscopic structure

A low temperature solvothermal method has been successfully used for preparation of two semiconductor compounds CuSbQ{sub 2} (Q=S(1), Se(2)) by the reactions of Cu, Sb and S(or Se) powders in 1,2-diaminopropane at 160 deg. C for 10 days. The crystal structure of 2 was determined first time using single crystal X-ray diffraction analyses. The structures of 1 and 2 are discussed in the view of covalent bonds and weak interactions. Double CuSbQ{sub 2} layers are assembled to a 3-D network structure by Cu...Sb and Q...Sb secondary bonds. In contrast with the isostructure of the two materials, the crystal morphology of them is quite different, brick-like crystals for CuSbS{sub 2} and plank-like crystals for CuSbSe{sub 2}. The phenomenon is related to their different inter-planar interactions. Semiconductor properties of the microcrystal samples are measured and the band gaps of 1 and 2 are 1.38 and 1.05 eV, respectively. - Graphical abstract: Two isostructural compounds, CuSbQ{sub 2} (Q=S, Se), display different morphologies in crystals, which is explained by comparing the strength of the interlayer interactions based on the crystal structure data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and magnetic properties of the Sr{sub 2}Al{sub 0.78}Mn{sub 1.22}O{sub 5.2} anion-deficient layered perovskite

A new layered perovskite Sr{sub 2}Al{sub 0.78}Mn{sub 1.22}O{sub 5.2} has been synthesized by solid state reaction in a sealed evacuated silica tube. The crystal structure has been determined using electron diffraction, high-resolution electron microscopy, and high-angle annular dark field imaging and refined from X-ray powder diffraction data (space group P4/mmm, a=3.89023(5) A, c=7.8034(1) A, R{sub I}=0.023, R{sub P}=0.015). The structure is characterized by an alternation of MnO{sub 2} and (Al{sub 0.78}Mn{sub 0.22})O{sub 1.2} layers. Oxygen atoms and vacancies, as well as the Al and Mn atoms in the (Al{sub 0.78}Mn{sub 0.22})O{sub 1.2} layers are disordered. The local atomic arrangement in these layers is suggested to consist of short fragments of brownmillerite-type tetrahedral chains of corner-sharing AlO{sub 4} tetrahedra interrupted by MnO{sub 6} octahedra, at which the chain fragments rotate over 90 deg. This results in an averaged tetragonal symmetry. This is confirmed by the valence state of Mn measured by EELS. The relationship between the Sr{sub 2}Al{sub 0.78}Mn{sub 1.22}O{sub 5.2} tetragonal perovskite and the parent Sr{sub 2}Al{sub 1.07}Mn{sub 0.93}O{sub 5} brownmillerite is discussed. Magnetic susceptibility measurements indicate spin glass behavior of Sr{sub 2}Al{sub 0.78}Mn{sub 1.22}O{sub 5.2}. The lack of long-range magnetic ordering contrasts with Mn-containing brownmillerites and is likely caused by the frustration of interlayer interactions due to presence of the Mn atoms in the (Al{sub 0.78}Mn{sub 0.22})O{sub 1.2} layers. - Graphical abstract: In contrast to Sr{sub 2}Al{sub 1.07}Mn{sub 0.93}O{sub 5}, the local atomic arrangement in these layers consist of short fragments of brownmillerite-type tetrahedral chains of corner-sharing AlO{sub 4} tetrahedra interrupted by MnO{sub 6} octahedra, at which the chain fragments rotate over 90 deg. When derived by bulk structure determination techniques such as X-ray powder diffraction, the structure will be described with an averaged tetragonal symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Li{sub (x)}Na{sub (2-x)}Mn{sub 2}S{sub 3} and LiNaMnS{sub 2} through redox-induced ion exchange reactions

Na{sub 2}Mn{sub 2}S{sub 3} was oxidatively deintercalated using iodine in acetonitrile to yield Na{sub 1.3}Mn{sub 2}S{sub 3}, with lattice constants nearly identical to that of the reactant. Lithium was then reductively intercalated into the oxidized product to yield Li{sub 0.7}Na{sub 1.3}Mn{sub 2}S{sub 3}. When heated, this metastable compound decomposed to form a new crystalline compound, LiNaMnS{sub 2}, along with MnS and residual Na{sub 2}Mn{sub 2}S{sub 3}. Single crystal X-ray diffraction structural analysis of LiNaMnS{sub 2} revealed that this compound crystallizes in P-3m1 with cell parameters a=4.0479(6) A, c=6.7759(14) A, V=96.15(3) A{sup 3} (Z=1, wR2=0.0367) in the NaLiCdS{sub 2} structure-type. - Graphical abstract: Structure of LiNaMnS{sub 2}. Li and Mn are statistically distributed in edge-shared tetrahedral environments linked into infinite planes. Sodium ions occupy interlayer sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Montmorillonite-based porous clay heterostructures (PCHs) intercalated with silica-titania pillars-synthesis and characterization

Porous clay heterostructures (PCHs) were synthesized using natural montmorillonite as a raw material. Apart from pure silica pillars also silica-titania pillars were intercalated into the interlayer space of the parent clay. The detailed studies of the calcination process of the as-prepared PCH samples as well as thermal stability of the pillared structure of these materials were performed. The pillared structure of PCHs intercalated with both silica and silica-titania clusters was found to be thermally stable up to temperatures exceeding 600 deg. C. It was found that titanium incorporated into the silica pillars was present mainly in the form of separated tetracoordinated cations. For the samples with the higher Ti loading also small contribution of titanium in the form of the polymeric oxide species was detected. Titanium incorporated into the PCH materials significantly increased their surface acidity forming mainly Bronsted acid sites. - Graphical abstract: Synthesis of the montmorillonite based porous clay heterostructures (PCHs) intercalated with silica-titania pillars has been performed. The mechanism of the thermal degradation of organic templates in the pore system of PCHs was studied. PCHs were characterized with respect to structure, texture, composition, surface acidity, thermal stability and form of introduced titanium.

36 MATERIALS SCIENCE↗

Effect of added zinc on the properties of cobalt-containing ceramic pigments prepared from layered double hydroxides

Layered double hydroxides (LDHs) with the hydrotalcite-type structure containing Co and Al, or Zn, Co and Al in the brucite-like layers and carbonate in the interlayer have been prepared by coprecipitation. The Zn/Co molar ratio was kept to 1 in all samples, while the divalent/trivalent molar ratio was varied from 2/1 to 1/2. The samples have been characterised by element chemical analysis, powder X-ray diffraction, differential thermal and thermogravimetric analysis, temperature-programmed reduction and FT-IR spectroscopy. A single hydrotalcite-like phase is formed for samples with molar ratio 2/1, which crystallinity decreases as the Al content is increased, developing small amounts of diaspore and dawsonite and probably an additional amorphous phase. Calcination at 1200 deg. C in air led to formation of spinels; a small amount of NaAlO{sub 2} was observed in the Al-rich samples, which was removed by washing. The nature of the spinels formed (containing Co{sup II}, Co{sup III}, Al{sup III} and Zn{sup II}) strongly depends on the cations molar ratio in the starting materials and the calcination treatment, leading to a partial oxidation of Co{sup II} species to Co{sup III} ones. Colour properties (L*a*b*) of the original and calcined solids have been measured. While the original samples show a pink colour (lighter for the series containing Zn), the calcined Co,Al samples show a dark blue colour and the Zn,Co,Al ones a green colour. Changes due to the different molar ratios within a given calcined series are less evident than between samples with the same composition in different series. These calcined materials could be usable as ceramic pigments. - Abstract: Mixed oxides from layered double hydroxides (LDHs) with the hydrotalcite-type structure containing Co and Al or Zn, Co and Al in the brucite-like layers are potential candidates for ceramic pigments with tunable colour properties. Display Omitted

36 MATERIALS SCIENCE↗

Swelling, intercalation, and exfoliation behavior of layered ruthenate derived from layered potassium ruthenate

The intercalation chemistry of a layered protonic ruthenate, H{sub 0.2}RuO{sub 2.1}.nH{sub 2}O, derived from a layered potassium ruthenate was studied in detail. Three phases with different hydration states were isolated, H{sub 0.2}RuO{sub 2.1}.nH{sub 2}O (n={approx}0, 0.5, 0.9), and its reactivity with tetrabutylammonium ions (TBA{sup +}) was considered. The layered protonic ruthenate mono-hydrate readily reacted with TBA{sup +}, affording direct intercalation of bulky tetrabutylammonium ions into the interlayer gallery. Fine-tuning the reaction conditions allowed exfoliation of the layered ruthenate into elementary nanosheets and thereby a simplified one-step exfoliation was achieved. Microscopic observation by atomic force microscopy and transmission electron microscopy clearly showed the formation of unilamellar sheets with very high two-dimensional anisotropy, a thickness of only 1.3+-0.1 nm. The nanosheets were characterized by two-dimensional crystallites with the oblique cell of a=0.5610(8) nm, b=0.5121(6) nm and gamma=109.4(2){sup o} on the basis of in-plane diffraction analysis. - Graphical abstract: Layered protonic ruthenate derived from a potassium form was directly reacted with bulky tetrabutylammonium ions to trigger exfoliation into nanosheets as long as it is highly hydrated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of porous and nonporous ZnO nanobelt, multipod, and hierarchical nanostructure from Zn-HDS

Zn based hydroxide double salts (Zn-HDS) with an interlayer spacing of 20 A was produced by dissolving dumbbell-like ZnO crystal. The resulting Zn-HDS with a ribbon-like shape has a suitable morphology to explore the remarkably mild procedure for synthesis of ZnO nanobelts. We found that the intercalated water molecules into the Zn-HDS could play a key role in the ZnO nanobelts porosity. The nonporous ZnO nanobelts were successfully synthesized from the Zn-HDS by soft-solution process at 95 {sup o}C through mild dehydration agent as Na{sub 2}CO{sub 3}. As-synthesized ZnO nanobelts were grown along not only the [0 1 -1 0], but also the [2 -1 -1 0]. On the other hand, the porous ZnO nanobelts were obtained from the Zn-HDS by calcinations at 200 and 400 {sup o}C. In addition, flower-like ZnO multipod and hierarchical nanostructures were produced from the Zn-HDS by using of strong dehydration agent (NaOH) through hydrothermal reaction at 150 and 230 {sup o}C. - Graphical abstract: Porous and nonporous ZnO nanobelts, multipod, and hierarchical nanostructure were successfully synthesized from Zn based hydroxyl double salts by hydrothermal reaction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗